Professional Documents
Culture Documents
Airbus SB A320-23-1707 R08 Dated 18.feb.2021
Airbus SB A320-23-1707 R08 Dated 18.feb.2021
SERVICE BULLETIN
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
ATA SYSTEM: 23
SUMMARY
APPLICABILITY Operator added.
PLANNING INFORMATION
APPLICABILITY
Configuration definition Aircraft added.
CONF 003
None
CONF 004
None
CONF 005
None
CONF ALL
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to add aircraft MSNs 1578, 1657 and 2123 for operator VVC.
Revision No. 02 issued to add aircraft MSNs 04099 and 04148 for operator TSC.
Revision No. 03 issued to add aircraft for operators TSC and VVC.
Revision No. 04 issued to add aircraft MSN 02914.
Revision No. 05 issued to add aircraft MSN 05582, 05606, 06059 and 06126 for operator
TCX.
Revision No. 06 issued to add aircraft MSN 03636 for operator 96U.
Revision No. 07 issued to add aircraft MSN 02616 and MSN 2740 for operator ASA and
update the CVR test procedure for CONF 004 per customer request for improvement.
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 151816P12301 153285P11119 156680P14496 30308P6624 39691P11257
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 153285P11119 156680P14496
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 153285P11119 156680P14496
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 004
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 151816P12301 153285P11119 156680P14496 30308P6624 39691P11257
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 005
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 151816P12301 153285P11119 156680P14496 30308P6624 39691P11257
CONF ALL
B. REASON
(1) History
This Service Bulletin is issued further to an operator's request.
(2) Objective/Action
This Service Bulletin installs the new HONEYWELL SSCVR PN 980-6032-023.
This SSCVR operates on 28VDC or 115VAC power supply. It has the datalink recording
function, the BITE and A429 clock acquisition capabilities.
This SSCVR also consists of an ULB with 90 days operational life.
(3) Advantages
Accomplishment of this Service Bulletin fulfills the operator's request.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE OPTIONAL COST SAVING NO
A/C OPERATION YES VENDOR SB NO
AFFECTED
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF 003
No specific aircraft maintenance configuration required.
CONF 004
No specific aircraft maintenance configuration required.
CONF 005
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
CONF 002
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 003
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 004
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 005
(1) Modification
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
39V 86Z AAR ASA G8E LAN PVG TSC VOE VVC
NOTE: This Service Bulletin is written for the operators listed above. The modification in
this Service Bulletin can be done by other operators. If other operators want to do
this modification, use the RFC/RMO procedure and write to:
AIRBUS
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
G. CONCURRENT REQUIREMENTS
ON A/C 01578, 01657, 02123, 02616, 02740, 02914, 03636, 03641, 04099, 04103, 04148,
04500, 05582, 05606, 06059, 06126, 07119, 07260, 08479, 08481, 08485, 08519, 08561,
08595, 08657, 08716
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
AIRCRAFT NO
EQUIPMENT YES
CONF 002
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
AIRCRAFT NO
EQUIPMENT YES
CONF 003
(1) Modification
AIRCRAFT NO
EQUIPMENT YES
CONF 004
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
AIRCRAFT NO
EQUIPMENT YES
CONF 005
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
AIRCRAFT NO
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF 002
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF 003
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF 004
(1) Modification
MANPOWER
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 4.50 h
CONF 005
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
Z310
FR77
FR74
FR73
FR70
ICN-A320-A-23XX1707-A-FAPE3-00EEH-A-002-01
ATA SYSTEM: 23
MSN CONFIGURATION
07119 07260 001
CONF 002
MSN CONFIGURATION
01578 01657 02123 02616 02740 02914 03641 002
CONF 003
MSN CONFIGURATION
03636 04099 04103 04148 04500 003
CONF 004
MSN CONFIGURATION
08479 08481 08485 08519 08561 08595 08657 08716 004
CONF 005
MSN CONFIGURATION
05582 05606 06059 06126 005
CONF ALL
(4) Configuration definition
CONF 001
REV 00 Mar 29/18 A320-23-1707
REV 08 Feb 18/21 Page 11
A318/A319/A320/A321
SERVICE BULLETIN
Configuration 001
CONF 001 is valid for A321 aircraft fitted with SSCVR Part Number (P/N) 2100-
1226-02.
CONF 001 retrofits following modifications: 151816P12301, 153285P11119,
156680P14496, 30308P6624, 39691P11257.
CONF 002
Configuration 002
CONF 002 is valid for A320 aircraft fitted with SSCVR Part Number (P/N) 980-
6022-001.
CONF 002 retrofits following modifications: 153285P11119, 156680P14496.
CONF 003
Configuration 003
CONF 003 is valid for A321 aircraft fitted with SSCVR Part Number (P/N) 980-
6022-001.
CONF 003 retrofits following modifications: 153285P11119, 156680P14496.
CONF 004
Configuration 004
CONF 004 is valid for A320 aircraft fitted with SSCVR Part Number (P/N) 2100-
1228-02.
CONF 004 retrofits following modifications: 151816P12301, 153285P11119,
156680P14496, 30308P6624, 39691P11257.
CONF 005
Configuration 005
CONF 005 is valid for A321 aircraft fitted with SSCVR Part Number (P/N) 2100-
1026-02.
CONF 005 retrofits following modifications: 151816P12301, 153285P11119,
156680P14496, 30308P6624, 39691P11257.
CONF ALL
B. CONCURRENT REQUIREMENTS
ON A/C 01578, 01657, 02123, 02616, 02740, 02914, 03636, 03641, 04099, 04103, 04148,
04500, 05582, 05606, 06059, 06126, 07119, 07260, 08479, 08481, 08485, 08519, 08561,
08595, 08657, 08716
(1) History
This Service Bulletin is issued further to an operator's request.
(2) Objective/Action
This Service Bulletin installs the new HONEYWELL SSCVR PN 980-6032-023.
This SSCVR operates on 28VDC or 115VAC power supply. It has the datalink recording
function, the BITE and A429 clock acquisition capabilities.
This SSCVR also consists of an ULB with 90 days operational life.
(3) Advantages
Accomplishment of this Service Bulletin fulfills the operator's request.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to:
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 001
1 Replace the SSCVR in the Aft-Fuselage Tail Section
CONF 002 003
1 Replace the SSCVR in the Aft-Fuselage Tail Section
CONF 004
1 Replace the SSCVR in the Aft-Fuselage Tail Section
CONF 005
1 Replace the SSCVR in the Aft-Fuselage Tail Section
CONF ALL
E. COMPLIANCE
(1) Classification
OPTIONAL: Service Bulletin for convenience or option.
(2) Accomplishment Timescale
In accordance with operators' maintenance schedule.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the SSCVR in the Aft-Fuselage Tail Section 1.00 h
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the SSCVR in the Aft-Fuselage Tail Section 1.00 h
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.00 h
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the SSCVR in the Aft-Fuselage Tail Section 1.00 h
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the SSCVR in the Aft-Fuselage Tail Section 1.00 h
PREPARATION FOR TEST
Job Set-up 0.50 h
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 4.50 h
CONF 005
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the SSCVR in the Aft-Fuselage Tail Section 1.00 h
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.00 h
ELAPSED TIME (HOURS) 4.00 h
CONF ALL
H. WEIGHT AND BALANCE
CONF 001
Not changed
CONF 002
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
Manufacturer's Empty Weight -1.4 kg (-3.086 lb)
Effect on Balance -49.1 kg.m (-355.140 lb.ft)
CONF 003
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
Manufacturer's Empty Weight -1.4 kg (-3.086 lb)
Effect on Balance -58.9 kg.m (-426.024 lb.ft)
CONF 004
Not changed
CONF 005
Not changed
CONF ALL
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 004
(1) Modification
(a) Task set A320-A-23-XX-1707-01000-93AA-A Modification
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF 001
Equipment for task set A320-A-23-XX-1707-01000-93AA-A Modification
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
AIRBUS Upgrade Services
Attn. Sales Manager
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
AIRBUS Upgrade Services
Attn. Sales Manager
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
AIRBUS Upgrade Services
Attn. Sales Manager
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
AIRBUS Upgrade Services
Attn. Sales Manager
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
AIRBUS Upgrade Services
Attn. Sales Manager
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
SSCVR-SOLID STATE
COCKPIT VOICE 2100-1226-02 980-6032-023 03 (1)
RECORDER
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 002
Interchangeable parts for task set A320-A-23-XX-1707-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
SSCVR-SOLID STATE
COCKPIT VOICE 980-6022-001 980-6032-023 01 (1) (2)
RECORDER
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): PN 980–6022–001 cannot replace PN 980–6032–023 if,
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
SSCVR-SOLID STATE
COCKPIT VOICE 980-6022-001 980-6032-023 01 (1) (2)
RECORDER
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): PN 980–6022–001 cannot replace PN 980–6032–023 if,
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
SSCVR-SOLID STATE
COCKPIT VOICE 2100-1228-02 980-6032-023 03 (1)
RECORDER
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 005
Interchangeable parts for task set A320-A-23-XX-1707-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
CVR-COCKPIT VOICE
2100-1026-02 980-6032-023 03 (1)
RECORDER
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 001
Spare parts for task set A320-A-23-XX-1707-01000-93AA-A Modification
CONF ALL
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-23-XX-1707-01000-93AA-A (A320-A-23-XX-1707-01ZZZ-93AZ-A)
Modification
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, contact AIRBUS for further instructions and
approval.
CONF 001
ELAPSED TIME (HOURS) 4.00 h
CONF 002
ELAPSED TIME (HOURS) 4.00 h
CONF 003
ELAPSED TIME (HOURS) 4.00 h
CONF 004
ELAPSED TIME (HOURS) 4.50 h
CONF 005
ELAPSED TIME (HOURS) 4.00 h
CONF ALL
B. PREPARATION
(1) Task A320-A-23-XX-1707-01001-540A-A (A320-A-23-XX-1707-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
Task 12-34-24-869-002
AMM
Task 23-71-35-000-001
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM Task 12-34-
24-869-002.
(b) Do the job set-up procedure as specified in the removal of the SSCVR (FIN 1RK),
refer to Ref. AMM Task 23-71-35-000-001.
C. PROCEDURE
CONF 001
(1) Task A320-A-23-XX-1707-01001-920A-A (A320-A-23-XX-1707-01ZZZ-920Z-A)
Replace the SSCVR in the Aft-Fuselage Tail Section
Job Set-Up Information
Working Area
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-31-53, Page Block 001
AMM
Task 23-71-35-000-001
Task 23-71-35-400-001
Procedure
(a) Standard Practices
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove:
Refer to Ref. AMM Task 23-71-35-000-001
FIN 1RK
1 SSCVR-SOLID STATE 2100-1226-02 Discard
COCKPIT VOICE
RECORDER
(c) Install:
Refer to Ref. AMM Task 23-71-35-400-001
FIN 1RK
1 SSCVR-SOLID STATE 980-6032-023
COCKPIT VOICE
RECORDER
CONF 002 003
(1) Task A320-A-23-XX-1707-01002-920A-A (A320-A-23-XX-1707-01ZZZ-920Z-A)
Replace the SSCVR in the Aft-Fuselage Tail Section
Job Set-Up Information
Working Area
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
980-6032-023 1 SSCVR
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-31-53, Page Block 001
AMM
Task 23-71-35-000-001
Task 23-71-35-400-001
Procedure
(a) Standard Practices
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove:
Refer to Ref. AMM Task 23-71-35-000-001
FIN 1RK
1 SSCVR-SOLID STATE 980-6022-001 Discard
COCKPIT VOICE
RECORDER
(c) Install:
Refer to Ref. AMM Task 23-71-35-400-001
FIN 1RK
1 SSCVR-SOLID STATE 980-6032-023
COCKPIT VOICE
RECORDER
CONF 004
(1) Task A320-A-23-XX-1707-01003-920A-A (A320-A-23-XX-1707-01ZZZ-920Z-A)
Replace the SSCVR in the Aft-Fuselage Tail Section
Job Set-Up Information
Working Area
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
980-6032-023 1 SSCVR
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
AMM 06-31-53, Page Block 001
Task 23-71-35-000-001
Manuals/Drawings References/Sheets
Task 23-71-35-400-001
Procedure
(a) Standard Practices
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove:
Refer to Ref. AMM Task 23-71-35-000-001
FIN 1RK
1 SSCVR-SOLID STATE 2100-1228-02 Discard
COCKPIT VOICE
RECORDER
(c) Install:
Refer to Ref. AMM Task 23-71-35-400-001
FIN 1RK
1 SSCVR-SOLID STATE 980-6032-023
COCKPIT VOICE
RECORDER
CONF 005
(1) Task A320-A-23-XX-1707-01004-920A-A (A320-A-23-XX-1707-01ZZZ-920Z-A)
Replace the SSCVR in the Aft-Fuselage Tail Section
Job Set-Up Information
Working Area
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
980-6032-023 1 SSCVR
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-31-53, Page Block 001
AMM
Task 23-71-35-000-001
Task 23-71-35-400-001
Procedure
(a) Standard Practices
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove:
Refer to Ref. AMM Task 23-71-35-000-001
FIN 1RK
1 CVR-COCKPIT VOICE 2100-1026-02 Discard
RECORDER
(c) Install:
Refer to Ref. AMM Task 23-71-35-400-001
FIN 1RK
1 SSCVR-SOLID STATE 980-6032-023
COCKPIT VOICE
RECORDER
CONF ALL
D. PREPARATION FOR TEST
CONF 004
(1) Task A320-A-23-XX-1707-02002-540A-A (A320-A-23-XX-1707-02ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
AMM Task 23-71-35-400-001
Procedure
(a) Remove the safety clips and tags and close the circuit breakers as specified after
the installation of the CVR FIN 1RK, refer to Ref. AMM Task 23-71-35-400-001.
CONF 001-003 005
None
CONF ALL
E. TEST
CONF 001-003 005
(1) Task A320-A-23-XX-1707-01001-390A-A (A320-A-23-XX-1707-01ZZZ-390Z-A)
Test
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
AMM Task 23-71-35-400-001
Procedure
(a) Do the test after the installation of the SSCVR (FIN 1RK), refer to Ref. AMM Task
23-71-35-400-001.
CONF 004
(1) Task A320-A-23-XX-1707-01002-390A-A (A320-A-23-XX-1707-01ZZZ-390Z-A)
Test
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
Task 23-71-00-710-001
Task 23-71-00-710-002
AMM Task 24-41-00-861-002
Task 24-41-00-862-002
24-50-00, Page Block 001
Procedure
(a) Do the operational check of the CVR and the CVR channel recording, refer to Ref.
AMM Task 23-71-00-710-001.
(b) Do the operational test of the CVR recording logic including time delay relay,
refer to Ref. AMM Task 23-71-00-710-002. If Ref. AMM Task 23-71-00-710-002 is
not available to the customer, then follow the steps below.
NOTE: During the test, it is possible that you will hear an audio signal related to
the synchronization with the second recorder (SSFDR). You can ignore it.
1 Job set-up:
a Aircraft Maintenance Configuration:
<1> Wait for a minimum of five minutes after the engines were
stopped.
<2> Energize the aircraft electrical circuits, refer to Ref. AMM Task
24-41-00-861-002.
<3> Make sure that the PARK BRK control handle is in the ON
position.
<4> Make sure that the aircraft is in the ground configuration.
<5> On maintenance Electrical Panel 50VU, connect a HEADSET 600
OHMS to the CVR/HEAD SET connector.
b Remove the safety clip(s) and/or tag(s) and close/unlock this (these)
circuit breaker(s):
NOTE: For the circuit breaker location, refer to Ref. AMM 24-50-00,
Page Block 001.
NOTE: For the circuit breaker location, refer to Ref. AMM 24-50-00,
Page Block 001.
2 Procedure:
a Operational Test of the FLT/GND Power Supply of the CVR (FIN 6RK):
NOTE: During the test, it is possible that you will hear your voice in
the headset.
ACTION RESULT
1. On the overhead panel, on Electrical Panel There is no tone in the headset.
21VU:
NOTE: During the test, it is possible that you will hear your voice in
the headset.
ACTION RESULT
1. On the overhead panel, on Electrical Panel There is no tone in the headset.
21VU:
ACTION RESULT
- Push the CVR TEST pushbutton switch
for a maximum of 6 seconds and
release it.
2. On the overhead panel, on Electrical Panel
49VU:
NOTE: During the test, it is possible that you will hear your voice in
the headset.
ACTION RESULT
1. On the overhead Electrical Panel 49VU:
ACTION RESULT
2. Immediately, start the STOPWATCH in the
cockpit.
On the overhead panel, on Electrical Panel
21VU:
You can hear the CVR TEST tone in the
- Wait 4 minutes then push the CVR
headset.
TEST pushbutton switch until you hear
a tone or for a maximum of 6 seconds.
You cannot hear the CVR TEST tone in the
- Wait 2 more minutes then push the
headset.
CVR TEST pushbutton switch for a
maximum of 6 seconds. NOTE: The test of relay FIN 10RK is
satisfactory.
d Remove the safety clips and tags and close these circuit breakers in
this sequence:
NOTE: For the circuit breaker location, refer to Ref. AMM 24–50–00.
Page Block 001.
e Remove the safety clips and tags and close these circuit breakers in
this sequence:
NOTE: For the circuit breaker location, refer to Ref. AMM 24–50–00.
Page Block 001.
3 Close-up:
a Put the aircraft back to its initial configuration.
<1> Disconnect the headset from the CVR/HEAD SET connector.
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
AMM Task 23-71-35-400-001
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the installation of the SSCVR (FIN 1RK),
refer to Ref. AMM Task 23-71-35-400-001.
(c) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-23-XX-1707-01001-90AA-A (A320-A-23-XX-1707-01ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.
MOD No. CONF 001 CONF 002 CONF 003 CONF 004 CONF 005
151816P12301 X X X
153285P11119 X X X X X
156680P14496 X X X X X
30308P6624 X X X
39691P11257 X X X
Table - Retrofitted Modifications
NOTE: "X" is used for the retrofitted modifications after accomplishment of this Service
Bulletin.
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.