Professional Documents
Culture Documents
Method Statement - Polarity Test
Method Statement - Polarity Test
1 ISSUE :-
POLARITY TESTING OF SOCKET
05/01/2015 DATE :- OUTLETS
1 PAGE :-
METHOD STATEMENT
FOR
POLARITY TESTING OF SOCKET OUTLETS
AL SHAHAD TOWER
5B+G+38
DOHA, THE STATE OF QATAR
1 ISSUE :-
POLARITY TESTING OF SOCKET
05/01/2015 DATE :- OUTLETS
2 PAGE :-
This Cover Page is a record of all revisions of the document identified above by numbers and title.
All previous Cover Pages are hereby superseeded and are to be destroyed.
- INDEX -
1.0 SCOPE.....................................................................................................3
2.0 PURPOSE...............................................................................................3
3.0 REFERENCE.........................................................................................3
6.0 SAFETY...................................................................................................4
1 ISSUE :-
POLARITY TESTING OF SOCKET
05/01/2015 DATE :- OUTLETS
3 PAGE :-
1.0 SCOPE
2.0 PURPOSE
3.0 REFERENCE
The following references are needed for polarity testing of socket outlets:
The supervisor shall supervise the installation work and the engineer shall
check and approve the installation according to project specification,
manufacturer’s instruction and approved shop drawing for installation of
.UPS
EW/ELEC/MS-12 DOC.NO.
1 ISSUE :-
POLARITY TESTING OF SOCKET
05/01/2015 DATE :- OUTLETS
4 PAGE :-
Ensure that all tools and equipment are in good working condition.
.Calibration and certification must be checked also prior to its use
6.0 SAFETY
6.1 Safety equipment like Hard hats, Safety shoes, Coveralls, Gloves
Goggles when necessary etc. to be worn at all times.
7.1.1 Set the multimeter to test AC voltage for 230V a.c or higher.
7.1.2 If the socket has a power switch ensure that this is active.
1 ISSUE :-
POLARITY TESTING OF SOCKET
05/01/2015 DATE :- OUTLETS
5 PAGE :-
7.2.2 Using the test plug display verify if Live and Neutral are
reversed.