Professional Documents
Culture Documents
This Document Will Be Valid For 180 Days From Aug 11, 21 or Until It Has Been Incorporated in The EM, Whichever Occurs First.
This Document Will Be Valid For 180 Days From Aug 11, 21 or Until It Has Been Incorporated in The EM, Whichever Occurs First.
TDRM Revise HPT/LPT ACC Air valve, Installation and Removal Task, Procedure & illustration corrections -
SUBJECT: AMM Revision
INITIATING DOCUMENTS CIR LINE ITEM REQUIREMENT ( YES OR NO ) __Y__
RFA #
____________ ISSUE # ___________________ ENGINE MODEL(S)
A1/A5
OTHER
_____________________________________________________________________________
PART NUMBERS INVOLVED (RFA OR OTHER) ________________________________________________
s t ."
fir
CIR LINE ITEM REQUIREMENTS
1 1 occu
PRODUCT SUPPORT LOGISTICS IMPACTS (Y = YES, N = NO)
u g er
EXISTING CLEANING AFFECTED ___N___ A ev
REPAIR PARTS REQUIRED ___N___
NEW CLEANING INTRODUCED ___N___
f r m
o hich
ILLUSTRATED PARTS CATALOG AFFECTED ___N___
___N___ ys , w ___N___
a
EXISTING INSPECTION AFFECTED STANDARD PRACTICES MANUAL AFFECTED
___N___d EM
NEW INSPECTION INTRODUCED
8 0
1 th e
WIRING MANUAL AFFECTED ___N___
EXISTING REPAIR AFFECTED
o r
___N___
f d in
FACILITIES EQUIP MANUAL AFFECTED ___N___
NEW STANDARD REPAIR INTRO
i d___N___
te
FACILITIES PLANNING MANUAL AFFECTED ___N___
NEW SOURCE DEMO REPAIR INTRO
v al ___N___
r a COMPONENT MAINTAINENCE MANUAL AFFECTED ___N___
b e p___N___
o
l r
il nco ___N___
NEW PROPRIETARY REPAIR INTRO TROUBLESHOOT/FAULT ISOL. MANUAL AFFECTED ___N___
w ___Y___
nt en i ___N___
SUPPORT EQUIPMENT REQUIRED MAINTENANCE MANUAL AFFECTED
e
m s be
FACILITIES EQUIPMENT REQUIRED ENGINE MANUAL AFFECTED ___N____
c u
o ha Randy Gionfriddo
d
CONFIRMED PARTY COMPANY
i til it
s
TECHNICAL DATA APPROVAL
12 Jul. 2021
________________________ ________________________ ________________________
h
"T un
(PRINT NAME) (Signature) (DATE)
or
IAE AUTHORIZATIONS
The technical content of this document is approved under authority of Federal Aviation
Regulation appointment Part 183 and is accepted by the FAA. The repair data and related
instructions are considered FAA approved or accepted as applicable.
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
1 PAGE 8
OF
Note to MDE: Revise V2500-A1/A5 AMM, ATA 75-24-51, Removal of the HPT/LPT ACC Air Valve (TASK 75-24-51-
000-010-B), as shown below. Delete the double strike through text add the bold red text as shown
below. V2500- A1/A5 AMM TASK 75-24-51-000-010-B Page revision dated May 01/21 used to show
the changes.
See IPC
** ON A/C FSN 002-002, 004-006, 009-009, 011-100, 201-300
TASK 75-24-51-000-010-B
Removal of the HPT/LPT ACC Air Valve
s t ."
WARNING BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS AFTER THE
2 1 rs fir
ENGINE SHUTDOWN. USE APPLICABLE THERMAL GLOVES. THE ENGINE
1 ,
1 occu
g er
PARTS CAN STAY HOT FOR ONE HOUR AFTER SHUTDOWN AND CAN BURN
u
A ev
YOU.
e
-----------------------------------------------
i l l b corp
-----------------------------------------------
C. Referenced Information.
t w in
n
e REFERENCE e n
u m e
b71-13-00-010-010-A DESIGNATION
c a s
o Ref.h78-30-00-040-012-A
Ref. Opening of the Fan Cowls 437AL(447AL),438AR(448AR)
-----------------------------------------------
-----------------------------------------------
4. Procedure
SUBTASK 75-24-51-020-072-A
A. Remove e HPT/LPT ACC Air Valve:
(1) Remove the actuator rod assembly from the HPT/LPT ACC air valve.
-----------------------------------------------
-----------------------------------------------
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
2 PAGE 8
OF
(2) Release the stator rod assembly and the rod of the HPT/LPT air valve from the ACC valve rod bracket.
Ref. Fig. Active Clearance Control Valve
(a) Remove two bolts (13) and the two nuts (36)
(b) Remove and discard the pin (32).
(c) Remove the nut (31) and the bolt (18).
(d) Remove the ACC rod bracket (37).
(e) Release the stator rod assembly (15) from the HPT/LPT ACC air valve (15) (5).
(f) Use the PULLER REMOVAL (IAE1J13504), to remove the bushes (30) and (19).
(3) Remove the ACC HPT valve bracket from the flange FM.
-----------------------------------------------
s t ."
-----------------------------------------------
2 1 rs fir
,
1 occu
(4) Remove the LPT valve rear flange of the HPT/LPT ACC air valve from the ACC valve bracket assembly on
1
flange FM.
----------------------------------------------- u g er
----------------------------------------------- A ev
f r m
o FM. hich
ys , w
(5) Remove the ACC HPT valve bracket from the flange
(a) Remove Remove the two nuts (2)8and 0 M (11) from the ACC HPT valve bracket (52) on flange
Ebolts
1 th e
the two
FM.
o r n (52) from the flange FM.
f bracketd i(42)
(b) Remove the ACC HPT valve
i d te(5) and related parts from the engine.
v al air valve
r a
(6) Remove the HPT/LPT ACC
b e po
il ncor
l
-----------------------------------------------
w
t n i to all exposed openings.
SUBTASK 75-24-51-620-051-A
B. Install COVER n
m e e
- PROTECTION
e
u b
SUBTASK 75-
d h as ACC Air Valve:
octhe24-51-020-073-A
it
is -----------------------------------------------
C. Remove HPT/LPT
h t i l
"T un -----------------------------------------------
or
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
3 PAGE 8
OF
Note to MDE: Replace the Figure 75-24-51-991-15100-13-B (SHEET 1) of V2500-A1/A5 Aircraft Maintenance
Manual TASK 75-24-51-000-010-B with figure shown on page 4 of 8 as shown below. V2500- A1/A5
AMM TASK 75-24-51-000-010-B Page revision dated May 01/21 used to show the changes. these
changes.
s t ."
2 1 rs fir
1 ,
1 occu
u g er
A ev
f r m
o hich
a y s ,w
0 d EM
8
1 the
r
fo d in
d
v ali rate
b e po
w il ncor
l
e nt en i
c u m s be
d o ha
h i til it
s
"T un
or
The orientation of Bolt (23)
and Nut (25) are incorrect.
The correct locations are
shown on next page.
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
4 PAGE 8
OF
s t ."
2 1 rs fir
1 ,
1 occu
u g er
A ev
f r m
o hich
a y s ,w
0 d EM
8
1 the
r
fo d in
d
v ali rate
b e po
w il ncor
l
e nt en i
c u m s be
d o ha
h i s l i t The Correct orientation of
or
Figure 75-24-51-991-15100-13-B (SHEET 1) - Active Clearance Control Valve
** ON A/C FSN 002-002, 004-006, 009-009, 011-100, 201-300
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
5 PAGE 8
OF
Note to MDE: Revise V2500-A1/A5 AMM, ATA 75-24-51, Installation of the HPT/LPT ACC Air Valve (TASK 75-24-
51-400-010-B), as shown below. Delete the double strike through text add the bold red text as
shown below. V2500- A1/A5 AMM TASK 75-24-51-400-010-B Page revision dated May 01/21 used
to show the changes.
See IPC
** ON A/C FSN 002-002, 004-006, 009-009, 011-100, 201-300
TASK 75-24-51-400-010-B
Installation of the HPT/LPT ACC Air Valve
s t ."
1. Reason for the Job
2 1 rs fir
-----------------------------------------------
1 ,
1 occu
u g er
A ev
2. Job Set-up Information
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
6 PAGE 8
OF
(j) Put the ACC HPT valve link (56) in to position so that the bearing ball of the ACC HPT valve link (56) is
between the bushes (48) and (66). Make sure that the bushes (48) and (66) touch the faces of the bearing
ball.
(k) Install the bolt (65) and the nut (47).
(l) TORQUE the nut (47) to between 32.5 and 42.5 lbf.in (0.37 and 0.48 m.daN) Ref. AMM TASK 70-23-11-
911-013.
(m) Safety the nut (47) with a new IPC-CSN(75-24-51-80 ITEM 110) PIN (82) (46) Ref. AMM TASK 70-40-
11-911-014.
(n) Install the bushes (51) and (54) in to the ACC HPT valve link (89).
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
s t ."
-----------------------------------------------
2 1 rs fir
(5) Install the heat shield assembly to the HPT/LPT ACC air valve.
1 ,
1 occu
-----------------------------------------------
----------------------------------------------- u g er
A ev
SUBTASK 75-24-51-420-055-A
r m ich
othe Engine.
B. Install the HPT/LPT ACC Air Valve and Related Partsfto h
a y s ,w
Ref. Fig. Active Clearance Control Valve Figure 75-24-51-991-15200-13-B
dvane is EinMthe fully open position.
(SHEET 1)
Ref. Fig. Active Clearance Control Valve Figure
(1) Extract the valve rod until the HPT valve 0
18 the
75-24-51-991-15000-13-B (SHEET 1)
CAUTION: l ACC
il THEnLPT
TO
c rVALVE TO
o MANIFOLD PERISEAL
PREVENT DAMAGE
THE
TO
TURBINE CLG MANIFOLD ASSEMBLY.
THE SEALS, MAKE SURE THAT THE ACC SEAL AND
t w i ARE IN THEIR CORRECT POSITIONS.
n
e the HPT/LPT
e n ACC air valve (5) to the turbine CLG manifold assembly and the LP turbine cooling
m
u as Move
(a) Install e
b the position of the ACC spherical joint assembly (41) ACC housing (40) with
o cmanifold.
h parts Seal (41) and Seal Retainer (42), as necessary, to connect the valve to the manifold.
i s d associated
i t
" T
SUBTASK
n til
h 75-24-51-420-074-A
C. Installuthe HPT/LPT ACC Air Valve:
o r
-----------------------------------------------
-----------------------------------------------
5. Close-up.
SUBTASK 75-24-51-410-056-A
-----------------------------------------------
-----------------------------------------------
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
7 PAGE 8
OF
Note to MDE: Replace the Figure 75-24-51-991-15100-13-B (SHEET 1) of V2500-A1/A5 Aircraft Maintenance
Manual TASKS 75-24-51-400-010-B with figure shown on page 8 of 8 as shown below. V2500-
A1/A5 AMM TASK 75-24-51-400-010-B Page revision dated May 01/21 used to show the changes.
these changes.
s t ."
2 1 rs fir
1 ,
1 occu
u g er
A ev
f r m
o hich
a y s ,w
0 d EM
8
1 the
r
fo d in
d
v ali rate
b e po
w il ncor
l
e nt en i
c u m s be
d o ha
h i til it
s
"T un
or
The orientation of Bolt (23)
and Nut (25) are incorrect.
The correct locations are
shown on next page.
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991
PSAF. No: 21VC292
International Aero Engines
REV. LTR. -
East Hartford, CT06108 PSAF
8 PAGE 8
OF
s t ."
2 1 rs fir
1 ,
1 occu
u g er
A ev
f r m
o hich
a y s ,w
0 d EM
8
1 the
r
fo d in
d
v ali rate
b e po
w il ncor
l
e nt en i
c u m s be The Correct orientation of
i s l i t as shown.
"Th unti
or
Figure 75-24-51-991-15100-13-B (SHEET 1) - Active Clearance Control Valve
** ON A/C FSN 002-002, 004-006, 009-009, 011-100, 201-300
This export marking supersedes all existing export notes in this document.
U.S. Export Classification: EAR 9E991