Professional Documents
Culture Documents
Technical Offer
Technical Offer
Technical Offer
August 4, 2021
Main Offer
Page 1
HYDROTECH ENG & TECH SVC
HYDROTECH FOR ROTATING
August 4, 2021
Proposal No: 001095-SQFZ
Item No: P-201 A/B (Base Offer)
Inquiry No: OSP085
Operating Conditions
SERVICE Fresh Water Pumps
LIQUID Water , Rated Temp. 50.0 deg C, Vapor Pres. 0.09 bar abs,
SP.GR 1.000, Viscosity 1.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 109.30 m³/h
HEAD 32.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (178 mm rated, max=235 mm, min=165 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6210 C3 (Inboard) / 7310 BEGAM (Outboard)
Page 1
Proposal No: 001095-SQFZ Item No: P-201 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 3x6-9
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No 03
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Page 2
Proposal No: 001095-SQFZ Item No: P-201 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 3x6-9
Casing drain - carbon steel; socket welded with flange
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Page 3
Proposal No: 001095-SQFZ Item No: P-201 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 3x6-9
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SA
Size 3x6-9 API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING, ASSY
101 1 IMPELLER (0D00460A539365)
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 1 OIL RING Bismuth Bronze
114 OIL RING
122 1 SHAFT,ASSY
123E 1 * # DEFLECTOR,FAN (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RING CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET (SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # DFLR,FAN GUARD SUPPORT Carbon Steel A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360A 3 * GASKET,THRUST END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME
382 1 BEARING LOCKWASHER STEEL
383 1 * # SEAL,MECH
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
437F 4 * # PIN,NAMEPLATE 18-8 STAINLESS
469P 2 * BOLT,HEX TAP (OIL RING RETAINER)
501 1 * # GUARD,CPLG ASSY
920A 1 # POWER END L GP 4140SFT L/TPR
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-201 A/B (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Fresh Water Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Water Published Efficiency: 71.5 % Suction Specific Speed: 12,361 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 70.2 % Min. Hydraulic Flow: 33.46 m³/h
S.G./Visc.: 1.000/1.000 cp Rated Total Power: 13.51 kW Min. Thermal Flow: N/A
Flow: 109.30 m³/h Non-Overloading Power: 14.22 kW
TDH: 32.00 m Imp. Dia. First 1 Stg(s): 178 mm
NPSHa: 9.20 m NPSHr: 4.10 m Shut off Head: 40.02 m
Solid size: Max. Solids Size: 16.00 mm % Susp. Solids
(by wtg):
Vapor Press: 0.09 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Oil loading Pumps
LIQUID Crude Oil , Rated Temp. 50.0 deg C, Vapor Pres. 1.00 bar
abs, SP.GR 0.810, Viscosity 11.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 29.80 m³/h
HEAD 55.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (217 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6210 C3 (Inboard) / 7310 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1.5x3-9N
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No 03
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Casing drain - carbon steel; socket welded with flange
Page 2
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1.5x3-9N
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Page 3
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1.5x3-9N
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SA
Size 1.5x3-9N API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING, ASSY
101 1 IMPELLER
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 1 OIL RING Bismuth Bronze
122 1 SHAFT,ASSY
123E 1 * # DEFLECTOR,FAN (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RING CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET (SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # DFLR,FAN GUARD SUPPORT Carbon Steel A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360A 3 * GASKET,THRUST END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME
382 1 BEARING LOCKWASHER STEEL
383 1 * # SEAL,MECH
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
437F 4 * # PIN,NAMEPLATE 18-8 STAINLESS
469P 2 * BOLT,HEX TAP (OIL RING RETAINER)
501 1 * # GUARD,CPLG ASSY
920A 1 # POWER END L GP 4140SFT L/TPR
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-202 A/B/C/D (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Oil loading Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Crude Oil Published Efficiency: 55.7 % Suction Specific Speed: 10,400 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 48.3 % Min. Hydraulic Flow: 11.16 m³/h
S.G./Visc.: 0.810/11.000 cp Rated Total Power: 7.45 kW Min. Thermal Flow: N/A
Flow: 29.80 m³/h Non-Overloading Power: 9.31 kW
TDH: 55.00 m Imp. Dia. First 1 Stg(s): 217 mm
NPSHa: 2.50 m NPSHr: 1.63 m Shut off Head: 60.76 m
Solid size: Max. Solids Size: 10.00 mm % Susp. Solids
(by wtg):
Vapor Press: 1.00 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Oil loading Pumps
LIQUID Crude Oil , Rated Temp. 50.0 deg C, Vapor Pres. 1.00 bar
abs, SP.GR 0.810, Viscosity 11.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 29.80 m³/h
HEAD 55.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (389 mm rated, max=412 mm, min=330 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6215 C3 (Inboard) / 7313 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0033-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Alt.) (Alternative) MODEL: 3700 11th Edition (ISO 13709) LX 2x4-16N
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Casing drain - carbon steel; socket welded with flange
Page 2
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Alt.) (Alternative) MODEL: 3700 11th Edition (ISO 13709) LX 2x4-16N
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Weights
TOTAL NET UNIT WEIGHT 482 kg
Program Version 1.76.0.0
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Page 3
Proposal No: 001095-SQFZ Item No: P-202 A/B/C/D (Alt.) (Alternative) MODEL: 3700 11th Edition (ISO 13709) LX 2x4-16N
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) LX
Size 2x4-16N API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING ASSY
101 1 IMPELLER
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST) Malleable Iron-High Carbon A47 GRADE 32510
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 2 OIL RING Bismuth Bronze
119A 1 * COVER,BEARING END (RADIAL)
122 1 SHAFT ASSY
123 1 OIL SEAL VBX (RADIAL)
123A 1 OIL SEAL VBX (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RNG,CASING A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT)
202 1 * RING,WEARING IMPELLER A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET(SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # COOLING ,FAN GUARD SUPPORT
251 1 * # OILER
304 1 NUT,IMPELLER,ASSY Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
353 4 * GLAND STUD QTY 4
355 4 * HEX NUT (GLAND STUD)
356A 20 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358E 1 * # PIPE PLUG, OIL RING INSPECTION Carbon Steel A108 GRADE 1213
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360 1 * GASKET,RADIAL END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME Carbon Steel A108 GRADE 1213
370P 5 * HHCS,RADIAL COVER TO FRAME Carbon Steel A108 GRADE 1213
382 1 BEARING LOCKWASHER STEEL
383 1 * # MECHANICAL SEAL
390C 3 * SHIM PACK,THRUST END COVER
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
408L 1 * # PIPE PLUG,FRAME COOLING
408M 1 * # PIPE PLUG,FRAME COOLING Carbon Steel A108 GRADE 1213
412 1 * O-RING,THRUST END COVER Nitrile
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 20 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
469P 2 * BOLT,HEX TAP (OIL RING RETAINER) Carbon Steel A108 GRADE 1213
469R 5 * # NUT,HEX GRD SPRT(THRST-FAN) Carbon Steel A108 GRADE 1213
501 1 * # COUPLING GUARD
920A 1 # POWER END LX 316SS SFT W/CLG
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-202 A/B/C/D (Alt.) (Alternative) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Oil loading Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Crude Oil Published Efficiency: 35.9 % Suction Specific Speed: 1,081 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 30.9 % Min. Hydraulic Flow: 11.46 m³/h
S.G./Visc.: 0.810/11.000 cp Rated Total Power: 11.70 kW Min. Thermal Flow: N/A
Flow: 29.80 m³/h Non-Overloading Power: 15.13 kW
TDH: 55.00 m Imp. Dia. First 1 Stg(s): 389 mm
NPSHa: 2.50 m NPSHr: 1.01 m Shut off Head: 60.91 m
Solid size: Max. Solids Size: 10.00 mm % Susp. Solids
(by wtg):
Vapor Press: 1.00 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Flare KO Drum Pumps
LIQUID Crude Oil , Rated Temp. 50.0 deg C, Vapor Pres. 2.20 bar
abs, SP.GR 0.810, Viscosity 11.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 11.90 m³/h
HEAD 50.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (195 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6210 C3 (Inboard) / 7310 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-203 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No Ext01
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Casing drain - carbon steel; socket welded with flange
Page 2
Proposal No: 001095-SQFZ Item No: P-203 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Comments
-Vapor pressure is more than the suction pressure, So the Liquid may be vaporized. Please check and
advise acc.
Program Version 1.76.0.0
Page 3
Proposal No: 001095-SQFZ Item No: P-203 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SA
Size 1x2-9LN API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING, ASSY
101 1 IMPELLER
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 1 OIL RING Bismuth Bronze
122 1 SHAFT,ASSY
123E 1 * # DEFLECTOR,FAN (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RING CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET (SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # DFLR,FAN GUARD SUPPORT Carbon Steel A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360A 3 * GASKET,THRUST END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME
382 1 BEARING LOCKWASHER STEEL
383 1 * # SEAL,MECH
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
437F 4 * # PIN,NAMEPLATE 18-8 STAINLESS
469P 2 * BOLT,HEX TAP (OIL RING RETAINER)
501 1 * # GUARD,CPLG ASSY
920A 1 # POWER END L GP 4140SFT L/TPR
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-203 A/B (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Flare KO Drum Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Crude Oil Published Efficiency: 39.5 % Suction Specific Speed: 18,373 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 31.1 % Min. Hydraulic Flow: 1.71 m³/h
S.G./Visc.: 0.810/11.000 cp Rated Total Power: 4.22 kW Min. Thermal Flow: N/A
Flow: 11.90 m³/h Non-Overloading Power: 5.11 kW
TDH: 50.00 m Imp. Dia. First 1 Stg(s): 195 mm
NPSHa: 2.50 m NPSHr: 1.15 m Shut off Head: 55.28 m
Solid size: Max. Solids Size: 16.00 mm % Susp. Solids
(by wtg):
Vapor Press: 2.20 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Offspec Tank Unloading Pump
LIQUID Oil , Rated Temp. 50.0 deg C, SP.GR 1.000, Viscosity 1.000
cp, Rated/Max. suction pressure 0.00 / 0.00 bar g
CAPACITY Rated 11.90 m³/h
HEAD 40.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (176 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6210 C3 (Inboard) / 7310 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
COUPLING GUARD Aluminum (non sparking) barrel type
Page 1
Proposal No: 001095-SQFZ Item No: P-207 A (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No Ext01
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Casing drain - carbon steel; socket welded with flange
Page 2
Proposal No: 001095-SQFZ Item No: P-207 A (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce
legalized certificate from chamber of commerce
Comments
- This is the only available selection due to low NPSHa. Please advise if you can increase it.
- For accurate selection, please provide us with relative density and Viscosity (Assumed 1 for both)
Program Version 1.76.0.0
Page 3
Proposal No: 001095-SQFZ Item No: P-207 A (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SA
Size 1x2-9LN API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING, ASSY
101 1 IMPELLER
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 1 OIL RING Bismuth Bronze
122 1 SHAFT,ASSY
123E 1 * # DEFLECTOR,FAN (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RING CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET (SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # DFLR,FAN GUARD SUPPORT Carbon Steel A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360A 3 * GASKET,THRUST END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME
382 1 BEARING LOCKWASHER STEEL
383 1 * # SEAL,MECH
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
437F 4 * # PIN,NAMEPLATE 18-8 STAINLESS
469P 2 * BOLT,HEX TAP (OIL RING RETAINER)
501 1 * # GUARD,CPLG ASSY
920A 1 # POWER END L GP 4140SFT L/TPR
DRAWING NO 001095-SQFZ/P-207 A
FORM # Program Version 1.76.0.0
Model: 3700 Size: 1x2-9LN Group: SA 50Hz RPM: 2950 Stages: 1
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-207 A (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Offspec Tank Unloading Pump
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Oil Published Efficiency: 39.4 % Suction Specific Speed: 18,373 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 36.6 % Min. Hydraulic Flow: 1.61 m³/h
S.G./Visc.: 1.000/1.000 cp Rated Total Power: 3.54 kW Min. Thermal Flow: N/A
Flow: 11.90 m³/h Non-Overloading Power: 4.20 kW
TDH: 40.00 m Imp. Dia. First 1 Stg(s): 176 mm
NPSHa: 0.35 m NPSHr: 1.12 m Shut off Head: 44.49 m
Solid size: Max. Solids Size: 16.00 mm % Susp. Solids
(by wtg):
Vapor Press:
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Offspec Tank Unloading Pump
LIQUID Oil , Rated Temp. 50.0 deg C, Vapor Pres. 1.01 bar abs,
SP.GR 1.000, Viscosity 1.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 11.90 m³/h
HEAD 40.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (176 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6210 C3 (Inboard) / 7310 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-207 B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No Ext01
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Casing drain - carbon steel; socket welded with flange
Page 2
Proposal No: 001095-SQFZ Item No: P-207 B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce
legalized certificate from chamber of commerce
Comments
- For accurate selection, please provide us with relative density and Viscosity (Assumed 1 for both)
Program Version 1.76.0.0
Page 3
Proposal No: 001095-SQFZ Item No: P-207 B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SA 1x2-9LN
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SA
Size 1x2-9LN API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING, ASSY
101 1 IMPELLER
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 1 OIL RING Bismuth Bronze
122 1 SHAFT,ASSY
123E 1 * # DEFLECTOR,FAN (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RING CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET (SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY Carbon Steel A216 GRADE WCB
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # DFLR,FAN GUARD SUPPORT Carbon Steel A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360A 3 * GASKET,THRUST END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME
382 1 BEARING LOCKWASHER STEEL
383 1 * # SEAL,MECH
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
437F 4 * # PIN,NAMEPLATE 18-8 STAINLESS
469P 2 * BOLT,HEX TAP (OIL RING RETAINER)
501 1 * # GUARD,CPLG ASSY
920A 1 # POWER END L GP 4140SFT L/TPR
DRAWING NO 001095-SQFZ/P-207 B
FORM # Program Version 1.76.0.0
Model: 3700 Size: 1x2-9LN Group: SA 50Hz RPM: 2950 Stages: 1
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-207 B (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Offspec Tank Unloading Pump
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Oil Published Efficiency: 39.4 % Suction Specific Speed: 18,373 m³/h,m
Temp.: 50.0 deg C Rated Pump Efficiency: 36.6 % Min. Hydraulic Flow: 1.61 m³/h
S.G./Visc.: 1.000/1.000 cp Rated Total Power: 3.54 kW Min. Thermal Flow: N/A
Flow: 11.90 m³/h Non-Overloading Power: 4.20 kW
TDH: 40.00 m Imp. Dia. First 1 Stg(s): 176 mm
NPSHa: 2.70 m NPSHr: 1.12 m Shut off Head: 44.49 m
Solid size: Max. Solids Size: 16.00 mm % Susp. Solids
(by wtg):
Vapor Press: 1.01 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Oil Washing Tank Pumps
LIQUID Crude Oil , Rated Temp. 65.0 deg C, Vapor Pres. 0.76 bar
abs, SP.GR 0.810, Viscosity 11.000 cp, Rated/Max. suction
pressure 0.00 / 0.00 bar g
CAPACITY Rated 40.00 m³/h
HEAD 50.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (207 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6212 C3 (Inboard) / 7312 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-212 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1.5x3-9A
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No 03
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
10% RT on all auxiliary piping welding
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Page 2
Proposal No: 001095-SQFZ Item No: P-212 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1.5x3-9A
Casing drain - carbon steel; socket welded with flange
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Page 3
Proposal No: 001095-SQFZ Item No: P-212 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1.5x3-9A
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SX
Size 1.5x3-9A API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING ASSY
101 1 IMPELLER (0D11590A039365)
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 2 OIL RING Bismuth Bronze
119A 1 * COVER,BEARING END (RADIAL)
122 1 SHAFT ASSY
123 1 OIL SEAL VBX (RADIAL)
123A 1 OIL SEAL VBX (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RNG,CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET(SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # COOLING ,FAN GUARD SUPPORT A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER,ASSY
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
353 4 * GLAND STUD QTY 4
355 4 * HEX NUT (GLAND STUD)
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358E 1 * # PIPE PLUG, OIL RING INSPECTION Carbon Steel A108 GRADE 1213
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360 1 * GASKET,RADIAL END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME Carbon Steel A108 GRADE 1213
370P 5 * HHCS,RADIAL COVER TO FRAME Carbon Steel A108 GRADE 1213
382 1 BEARING LOCKWASHER STEEL
383 1 * # MECHANICAL SEAL
390C 3 * SHIM PACK,THRUST END COVER
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
408L 1 * # PIPE PLUG,FRAME COOLING
408M 1 * # PIPE PLUG,FRAME COOLING Carbon Steel A108 GRADE 1213
412 1 * O-RING,THRUST END COVER Nitrile
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
469P 2 * BOLT,HEX TAP (OIL RING RETAINER) Carbon Steel A108 GRADE 1213
469R 5 * # NUT,HEX GRD SPRT(THRST-FAN) Carbon Steel A108 GRADE 1213
501 1 * # COUPLING GUARD
920A 1 # POWER END LX 316SS SFT W/CLG
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-212 A/B (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Oil Washing Tank Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Crude Oil Published Efficiency: 60.1 % Suction Specific Speed: 14,282 m³/h,m
Temp.: 65.0 deg C Rated Pump Efficiency: 51.8 % Min. Hydraulic Flow: 11.63 m³/h
S.G./Visc.: 0.810/11.000 cp Rated Total Power: 8.51 kW Min. Thermal Flow: N/A
Flow: 40.00 m³/h Non-Overloading Power: 9.27 kW
TDH: 50.00 m Imp. Dia. First 1 Stg(s): 207 mm
NPSHa: NPSHr: 1.37 m Shut off Head: 59.68 m
Solid size: Max. Solids Size: 9.65 mm % Susp. Solids
(by wtg):
Vapor Press: 0.76 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Operating Conditions
SERVICE Closed Drain Sump Pumps
LIQUID Condensate/Water , Rated Temp. 60.0 deg C, Vapor Pres.
1.10 bar abs, SP.GR 1.000, Viscosity 65.000 cp, Rated/Max.
suction pressure 0.00 / 0.00 bar g
CAPACITY Rated 22.23 m³/h
HEAD 64.00 (m)
AMBIENT TEMP 50.0 (deg C)
Materials
CONSTRUCTION API 610 S-8
CASING Carbon steel
CASING WEAR RING 316LSS
ST.BOX COVER Carbon steel
IMPELLER 316LSS - Enclosed (230 mm rated, max=235 mm, min=152 mm)
IMPELLER WEAR RING Nitronic 60
CASING GASKETS Spiral Wound 316SS
SHAFT MATERIAL 316SS
LUBRICATION Ring oil
SEAL CHAMBER Standard non cooled
BEARINGS 6212 C3 (Inboard) / 7312 BEGAM (Outboard)
COUPLING John Crane (Metastream) - TSCS 0013-S.F. 1.00-Compliant to API 610 Standard
Page 1
Proposal No: 001095-SQFZ Item No: P-213 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1x2-9A
COUPLING GUARD Aluminum (non sparking) barrel type
BASEPLATE Fabricated steel extended - Motor J/Box may overhang the base plate API No 03
Sealing Method
MECHANICAL SEAL Mechanical Seal - (Cartridge - Single)
Flanges
300# Raised face
Frame Features
Carbon Steel bearing frame and thrust end cover
Dimples on bearing frame at thrust end
Flat surface at thrust bearing
Forced Convection Cooling
Straight shaft coupling end
Trico watchdog glass bottle oiler
Assembly and Testing*
*Witnessed Testing Notification Time 10 Working Days
C of C, impeller balance
Impeller balanced to ISO G2.5
Pressure Casing - Standard hydro test, with surfactant, 30 min
Pump cleanliness inspection prior to assembly
Submit test procedures for approval
VENDOR KEEP REPAIR AND HT RECORDS
VENDOR SUBMIT TEST DATA WITHIN 24 h
Witness NPSHr test per API (requires performance test) - (API-NPSH3-WIT)
Witness hydro test, assembled pump
Witness mechanical run test with bearing temperatures (requires performance test), 4.0 hours - (API-MRT-WIT)
Witness performance test per API (includes vibration) - (API-PERF-WIT)
Witness sound pressure test (requires performance test) - (APIHI-SPL-WIT)
Witness unit test with job motor and coupling and baseplate mounted auxiliary systems only (requires performance test) -
(APIHI-CUT1)
Sound pressure test: ITT does not have facilities to perform isolated sound pressure tests nor guarantee mandatory sound levels,
but will take sound level readings during our standard performance test for information only as these readings include noise from
the motor, piping, valves as well as test area background noise.
*Hydro test pressure will be limited to the lowest pump component hydro test pressure or the mechanical seal pressure rating
QA Requirements
10% RT on all auxiliary piping welding
Impeller - CMTR's with physical test results - MC2
Impeller - PT, 100% of accessible casting surfaces, API 610 - PT1
Pressure Casing - CMTR's with physical test results - MC2
Pressure Casing - PT, 100% accessible surfaces, API 610 (Includes PT machined surfaces & conn welds) - PT1
Pump Level QA - Casting repair procedure QCP-504, submit to customer for approval - WC2
Pump Level QA - Certificate of Conformance, material of construction, per customer order
Shop inspection
Turned Parts - Shaft - CMTR's with physical test results - MC2
Piping
API 682 plan 31 - 316L SS pipe socket welded flange break points
API 682 plan 65B - 316L SS pipe socket welded flange break points (without system)
API Plan 31 System
API Plan 65B System
Page 2
Proposal No: 001095-SQFZ Item No: P-213 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1x2-9A
Casing drain - carbon steel; socket welded with flange
Baseplate Features
Baseplate drilling for IEC motor
Machined surfaces on baseplate for levelling purposes
SS shims for driver feet
Miscellaneous
Flange protection provided (metal)
Pressure gauge (Loose supply)
Temprature gauge (Loose supply)
Special Requirements
Witnessed Testing Notification Time 10 Working Days
Painting
Goulds Blue standard painting
Goulds Zinc Clad Plus II Rich Primer (2.0 mils/Sherwin Williams 6509-39572) - underside of baseplate
Sandblast
Underside of bedplate SSPC-SP6
Optional Features:
Miscellaneous
Preparation for Long term storage per LTS Form QA371
Boxing
Export
Freight
International freight ocean
Stamped invoice from chamber of commerce (Qty 1)
legalized certificate from chamber of commerce (Qty 1)
Comments
-NPSHr is higher than NPSHa, please advise if you can increase your NPSHa.
Program Version 1.76.0.0
Page 3
Proposal No: 001095-SQFZ Item No: P-213 A/B (Base Offer) MODEL: 3700 11th Edition (ISO 13709) SX 1x2-9A
This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
ITT Inc. ('ITT') submits this proposal as the coronavirus (COVID-19) pandemic ('COVID-19') is impacting organizations
and its supply chains around the world. ITT is carefully monitoring our supply chain and production facilities as it
relates to this proposal but, given the fluid nature of this pandemic, shall not be liable for impacts arising from
COVID-19 and accordingly shall be entitled to any adjustments as it relates to time or cost impacts which directly or
indirectly resulting out of or arise in connection with COVID-19. Notwithstanding anything contained in this proposal
to the contrary, ITT Inc. further reserves the right to modify or amend any statement made within this proposal due to
any impacts arising from COVID-19.
Page 4
CROSS SECTIONAL DRAWING Model 3700 11th Edition (ISO 13709) SX
Size 1x2-9A API 610 S-8
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
100 1 * CASING ASSY
101 1 IMPELLER (0D11590A039365)
109A 1 * END COVER (THRUST) Carbon Steel A216 GRADE WCB
112 1 * BALL BEARING (THRUST)
113B 1 * # PLUG,PIPE (OIL FILL) Carbon Steel A108 GRADE 1213
114 2 OIL RING Bismuth Bronze
119A 1 * COVER,BEARING END (RADIAL)
122 1 SHAFT ASSY
123 1 OIL SEAL VBX (RADIAL)
123A 1 OIL SEAL VBX (THRUST)
125 1 BUSHING,SB 316L Stainless Steel A276 TYPE 316L
136 1 BEARING LOCKNUT STEEL
164 1 * WRG RNG,CASING 316L Stainless Steel A743 GRADE CF-3M
168 1 * BALL BEARING (RADIAL)
178 1 KEY,IMPELLER 316 Stainless Steel A276 TYPE 316
183 1 * # BEDPLATE
184 1 CHAMBER,SEAL
198A 1 * # SCREW,SET (IMPELLER NUT) 316 Stainless Steel A276 TYPE 316
202 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
203 1 * RING,WEARING IMPELLER Nitronic 60 A743 GRADE CF10SMnN/ Nitronic 60
222D 3 * # SCREW,SET(SB BUSHING) 316 Stainless Steel A276 TYPE 316
222E 6 * # SCREW,SET WRG RINGS) 316 Stainless Steel A276 TYPE 316
222V 2 * # SCREW,SET 316 Stainless Steel A276 TYPE 316
228 1 * FRAME ASSY
230 1 * RING,WEARING SEAL CHAMBER 316L Stainless Steel A743 GRADE CF-3M
232A 1 * # COUPLING
234D 1 * # COOLING ,FAN GUARD SUPPORT A283 GRADE D
251 1 * # OILER
304 1 NUT,IMPELLER,ASSY
319A 2 * # PIPE PLUG, SIGHT OILER
320 6 # SCREW,SET (IMPLR RINGS) 316 Stainless Steel A276 TYPE 316
351 1 * GASKET,CASE 316LSS
353 4 * GLAND STUD QTY 4
355 4 * HEX NUT (GLAND STUD)
356A 12 * STUD (CASE SL CHAMBER) Chromium-Molybdenum A193 GRADE B7
358E 1 * # PIPE PLUG, OIL RING INSPECTION Carbon Steel A108 GRADE 1213
358F 3 * # PIPE PLUG, OIL MIST INJECTION Carbon Steel A108 GRADE 1213
360 1 * GASKET,RADIAL END COVER Vellumoid D1170 GRADE P3313B
370H 4 * HHCS,FRAME TO SEAL CHAMBER Carbon Steel A108 GRADE 1213
370N 5 * HHCS,THRUST COVER TO FRAME Carbon Steel A108 GRADE 1213
370P 5 * HHCS,RADIAL COVER TO FRAME Carbon Steel A108 GRADE 1213
382 1 BEARING LOCKWASHER STEEL
383 1 * # MECHANICAL SEAL
390C 3 * SHIM PACK,THRUST END COVER
400 1 KEY,COUPLING Carbon Steel A108 GRADE 1018-B1112/GRADE 1020
408A 1 * # PIPE PLUG,OIL DRAIN
408L 1 * # PIPE PLUG,FRAME COOLING
408M 1 * # PIPE PLUG,FRAME COOLING Carbon Steel A108 GRADE 1213
412 1 * O-RING,THRUST END COVER Nitrile
418 3 * # BOLT,H TAP Carbon Steel A108 GRADE 1213
425 12 * NUT,HEX (CASE STUD) Carbon Steel A194 GRADE 2H
469P 2 * BOLT,HEX TAP (OIL RING RETAINER) Carbon Steel A108 GRADE 1213
469R 5 * # NUT,HEX GRD SPRT(THRST-FAN) Carbon Steel A108 GRADE 1213
501 1 * # COUPLING GUARD
920A 1 # POWER END LX 316SS SFT W/CLG
Job/Inq.No. : OSP085
Purchaser : HYDROTECH FOR ROTATING
End User : Petrosanan Issued by : Mohamed Magdi Rev. : 0
Item/Equip.No. : P-213 A/B (Base Offer) Quotation No. : 001095-SQFZ Date : 08/04/2021
Service : Closed Drain Sump Pumps
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: Condensate/Water Published Efficiency: 49.8 % Suction Specific Speed: 12,603 m³/h,m
Temp.: 60.0 deg C Rated Pump Efficiency: 32.5 % Min. Hydraulic Flow: 6.08 m³/h
S.G./Visc.: 1.000/65.000 cp Rated Total Power: 11.87 kW Min. Thermal Flow: N/A
Flow: 22.23 m³/h Non-Overloading Power: 14.20 kW
TDH: 64.00 m Imp. Dia. First 1 Stg(s): 230 mm
NPSHa: 0.30 m NPSHr: 1.06 m Shut off Head: 79.44 m
Solid size: Max. Solids Size: 9.65 mm % Susp. Solids
(by wtg):
Vapor Press: 1.10 bar abs
Notes: 1. Curve shown is at ambient temperature conditions.
Planned
Shipment Elapsed Time - Date of Order to Date of Cancellation (weeks)
(weeks)
0 2.01 4.01 6.01 8.01 12.01 16.01 20.01 24.01 28.01 32.01 36.01 40.01 44.01 48.01 52.01 56.01 60.01
to 2 to 4 to 6 to 8 to 12 to 16 to 20 to 24 to 28 to 32 to 36 to 40 to 44 to 48 to 52 to 56 to 60 64
Up to 8 20 50 75 100
8.01 to
12 15 40 60 80 100
12.01 to
16 10 25 45 60 85 100
16.01 to
20 10 15 25 45 65 85 100
20.01 to
24 10 10 20 25 50 70 90 100
24.01 to
28 10 10 15 20 25 50 70 90 100
28.01 to
32 10 10 10 15 20 35 60 75 90 100
32.01 to
36 10 10 10 15 20 25 50 60 85 95 100
36.01 to
40 10 10 10 10 15 25 50 60 70 85 95 100
40.01 to
44 10 10 10 10 15 25 45 55 65 80 90 95 100
44.01 to
48 10 10 10 10 15 25 45 55 60 65 80 90 95 100
48.01 to
52 10 10 10 10 15 20 40 50 55 60 70 85 90 95 100
52.01 to
56 10 10 10 10 15 20 35 50 55 60 70 80 85 90 95 100
Above
56 * * * * * * * * * * * * * * * * * *
Note: The above cancellation rates apply to manufactured equipment only. Any sub-supplier cancellation charges are not reflected above, and would apply accordingly.
* to Be Assigned