Professional Documents
Culture Documents
Ericsson Mini-Link 6600 Nodes
Ericsson Mini-Link 6600 Nodes
Ericsson Mini-Link 6600 Nodes
NPU 1002
➢ Front Interfaces
▪ 2x RJ 45 100Mbps / 1 Gbps Ethernet ports
▪ 1 x SFP 1Gbps Ethernet port
▪ 2 x SFP/SFP+ 1Gbps or 10Gbps Ethernet ports
▪ 2 MHz sync , Sync Ethernet
▪ User I/O (3 in 3 out)
▪ Local management
➢ DCN
▪ DCN over VLAN or Routed DCN
➢ Fully utilized in MINI-LINK 6692 but can also be positioned in MINI-LINK 6693
➢ Hardware prepared for NPU redundancy in MINI-LINK 6692
NPU 1003
➢ Front Interfaces
▪ 4xE1 front interface
▪ 2x RJ 45 100Mbps / 1 Gbps Ethernet ports
▪ 1 x SFP 1Gbps Ethernet port
▪ 2 x SFP/SFP+ 1Gbps or 10Gbps Ethernet ports
▪ 2 MHz sync , Sync Ethernet
▪ User I/O (2 in 1 out)
▪ Local management
➢ DCN
▪ DCN over VLAN or Routed DCN
➢ Can be positioned in MINI-LINK 6693
MINI-LINK-6600 Introduction | Ahmed Hassaan | 2019-02-26 | Page 6
Interface board
LTU 1001 & LTU 1002
LTU 1001
LTU 1002
MMU 1002
➢ Dual carrier modem
▪ 1+0/1+1/2+0/2x1+0
▪ 2+2 / 2x1+1 / 4+0 using two different modems
➢ Support XPIC / HSB / SD topologies
➢ Use MINI-LINK 6363 or RAU2 X
➢ Pre requisite is MINI-LINK 6692/6693
using NPU 1002 or NPU 1003