Professional Documents
Culture Documents
Ink Absorber Canon
Ink Absorber Canon
Sometimes when the printer is reset but the printer still blingking too. That caused absorber is
full, so even though the printer is reset still blingking. The solution I have printer and dismantle
the cleaning of the absorber thus more ready to use. Printer All brand ink jet printer provides a
special bath containing the ink-absorbing foam. Located at the base of the printer canon.
Ok here is the procedure to reset the inm dupm counter but how can reset the ink????
1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then
press and hold the Power button. (DO NOT release the buttons. The LED light should be green to
indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the
Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release
both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with
orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the
operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.
Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only
led blinking. Following some solutions problem of printer that marked with led blinking.
3x Orange 1x green
Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to
Canon service center.
4x orange 1x green
Solution: Reset the printer using generaltools or software resetter. If not work using reset
manual. Each printers having different set of manual reset
5x orange 1x green
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.
7x orange 1x green
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.
8x orange 1x green
Solution: Reset the printer using generaltools or software resetter. If not work using reset
manual. Each printers having different set of manual reset