Professional Documents
Culture Documents
Gtu MCQ: Dynamics of Machinery (3151911)
Gtu MCQ: Dynamics of Machinery (3151911)
21. Coupling rods with connecting rods and pins can be treated as ________.
(a) rotating masses
(b) masses in linear motion
(c) reciprocating masses
(d) massless
Answer: Option (a)
23. In a coupling rod of a locomotive, each of the four pairs is a __________ pair.
(a) sliding
(b) turning
(c) rolling
(d) screw
Answer: Option (b)
24. In order to facilitate the starting of the locomotive in any position, the cranks of a locomotive, with two cylinders, are placed at _____ to each other.
(a) 45 degree
(b) 90 degree
(c) 120 degree
(d) 180 degree
25. In a locomotive, the maximum magnitude of the unbalanced force along the perpendicular to the line of stroke is known as
(a) tractive force
(b) swaying couple
(c) hammer blow
(d) none of the mentioned
27. What is the effect of the variation of pressure on the rails?
GTU MCQ
(a) Hammering action
(b) Piston effort
Dynamics of Machinery
(c) Variation (3151911) MCQs
in tractive force
(d) Swaying couple
29. The variation of pressure between the wheel and the rail (i.e. hammer blow) may be reduced by _______________.
(a) equal distribution of balanced masses
(b) more mass towards driving wheel
(c) more mass towards trailing wheel
(d) more mass towards the leading wheel
30. In a locomotive, the resultant unbalanced force due to the two cylinders along the line of stroke is known as
(a) tractive force
(b) swaying couple
(c) hammer blow
(d) none of the mentioned