Professional Documents
Culture Documents
Ground Engaging Catalogue
Ground Engaging Catalogue
Ground Engaging Catalogue
2 0 16
-
2 0 15
QCCANADA - GET 2015
70
COMBI
CONSTRUCTION SERIES
PAGE 1-12
COMBI
MINING SERIES
PAGE 13-26
CONSTRUCTION SERIES
QCCanada is proud to be
the Authorized Combi Parts
dealer for Western Canada.
1
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
C-LOCK C-TOOL
2
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
Specifications
This document includes specification sheets giving the weight, dimensions and part number
of all COMBI parts products. Information on how to determine the size of a worn COMBI
parts tooth or adapter is included below.
FIT AND WEAR
Page
Stabile coupling geometry with two supporting areas. The short adapter nose in combination with two insert
Size recognition
supports gives optimized 2 from wear.
wear ratio for the tooth. Higher top shoulder designed to protect the adapter
The two surface coupling
Mini geometry of Combi parts spreads the forces across the joint betwen the tooth 3 and adapter.
Midi 4
C0 5
C1 6
C2 7-8
C3 9-10
C3.5 11-12
C4 13-14
C5 15-16
C6 17-18
Size recognition
Size Width S Width S1
[mm] SIZE RECOGNITION
[mm]
Mini 17 28
A wide range of sizes are available to fit almost any excavator or loader.
Midi 18 33
C0 23 43
C1 WIDTH S 25 WIDTH S149
SIZE
C2
(mm) 27
(mm) 53
C3 C3 35 35 68 68
C3.5 C3.5 41 41 79 79
C4 C4 45 45 87 87
C5 51 100
C5 51 100
C6 80 125
3
03/005-4eng Page 3
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
APPLICATION TABLE
COMBI CONSTRUCTION SERIES - APPLICATION TABLE
For further information on welding, assembly and maintenance, see welding and assembly instructions.
breakout force diagram – Backhoe breakout force diagram – Face shovel breakout force diagram
T1 T2 T3 T4
T5 T6 T7 T25
T58
Type Art. no. Weight L H H1 W W1
[kg] [mm] [mm] [mm] [mm] [mm]
T1 13111 7,4 265 119 94 124 86
T2 13112 9,2 250 119 102 124 116
T3 13113 8,7 267 119 94 124 115
T4 13114 9,0 245 119 102 124 115
T5 13115 6,8 263 125 63 124 105
T6 13116¹ 11,0 198 102 66 330 N/A
Page 10 03/005-4eng
5
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
6
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
C3.5
C3.5
Specifications
SPECIFICATIONS
Teeth -TEETH
7
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
Specifications
C3.5
C3.5
Adapters, Accessories
SPECIFICATIONS - ADAPTERS, ACCESSORIES
A1 A8E A8L
¹) General recommendation regarding edge thickness is 40-50 mm. However, tooth type T48 makes it possible to increase
the edge thickness with up to 15 mm.
C-lock C-tool
8
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
C4C4
Specifications
SPECIFICATIONS
Teeth -TEETH
T1 T3 T5 T7
9
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
10
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
Specifications
Teeth C4
C5 SPECIFICATIONS -TEETH
T2 T5 T7 T8
11
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
12
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
MINING SERIES
13
QCCANADA
WEAR INDICATORS
The tooth, adapter and lock have all been equipped with this wear indicator to signal when the part is no longer
performing optimally and is due for a change. Utilizing the wear indicators will prevent failure or breakage of
parts, minimize down time and improve safety.
Teeth and adapters have wear indicators which show when a replacement is needed.
ProClaws provide tooth wear ratios up to 70% without risking wear on the adapter nose.
14
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
COMBI MINING - LOCKING SYSTEM
The assembly is held in place by a vertical top-mounted locking device which reflects the market demand and optimal
design from an engineering standpoint.
PIN HOLE PIN HOLE
TOOTH STYLE LOCATION SHAPE
LOCKING SYSTEM REMARKS
15
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
QCCANADA
16
w w w. q c c a n a d a . c o m toll free 1-888-507-9734
W10 SPECIFICATIONS Teeth, Adapters, Accessories
GPE AE
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 710010 * 50
BE 710011 24.4 60 62 457 132 184 280 158 10
GPE 710100 12.9 324 153 15 120 128
AE 710110 15.1 334 153 19 129 134
SL-lock 710301 0.4 124 38
ML-lock* 710302
T-tool 700700 1.5
* not yet available
17
Combi Wear Parts AB w w w. q cCombi
c a n a Wear
d a . c oPart
m Inc.toll free 1-888-507-9734
W20 SPECIFICATIONS Teeth, Adapters, Accessories
GPE AE PE
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 720010 90.7 2.76 2.84 21.46 6.18 8.94 12.95 7.32 10
BE 720011 92.7 2.36 2.44 21.46 6.18 8.94 12.95 7.32 10
GPE 720100 47.1 14.80 7.44 0.71 5.47 6.65
AE 720110 55.1 15.24 7.44 1.02 5.83 6.65
PE 720120 51.1 15.91 7.44 0.99 3.42 6.65
SL-lock 720301 2.2 5.73 1.99
ML-lock 720302 1.8 5.73
T-tool 700700 3.3
18
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . cPart
o m Inc.toll free 1-888-507-9734
W25 SPECIFICATIONS Teeth, Adapters, Accessories
GPE AE PE AL
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 725010 114.5 3.15 3.23 23.82 6.95 8.03 14.45 8.07 10
BE 725011 125.6 2.76 2.84 23.82 6.95 11.38 14.45 8.15 10
TL 825026 133.3 2.95 3.03 24.37 6.949 14.92 8.50 8.42 15
GPE 725100 61.7 16.26 7.91 0.77 6.18 7.09
AE 725110 73.8 16.77 8.39 1.11 6.61 7.56
PE 725120 69.4 17.52 8.39 1.09 3.90 7.56
AL 825110 85.9 17.09 8.39 1.11 6.58 7.56
SL-lock 725301 2.6 6.31 2.26
ML-lock 725302 2.2 6.31
T-tool 700700 3.3
19
Combi Wear Parts AB w w w. q cCombi
c a n a Wear
d a . c oPart
m Inc.toll free 1-888-507-9734
W30 SPECIFICATIONS Teeth, Adapters, Accessories
AE PE AL
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 730010 188.8 3.54 3.62 26.69 7.95 12.48 16.06 9.57 10
BE 730012 174.0 3.54 3.62 26.69 7.95 12,48 16.06 9.37 10
TL 830024 200.4 2.95 3.03 27.36 7.95 16.54 9.61 9.80 15
TL 830026 200.4 3.54 3.62 27.36 7.95 16.54 9.61 9.92 15
CM 730501 16.7 8.39 3.46 5.59
AE 730110 104.2 18.46 9.29 1.20 7.48 8.46
PE 730120 100.2 18.94 9.29 1.18 4.53 8.46
AL 830110 120.0 18.82 9.29 1.20 7.40 8.46
SL-lock 730301 3.2 7.05 2.66
ML-lock* 730302
T-tool 700700 3.3
* not yet available
20
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . c Part
o m Inc.toll free 1-888-507-9734
W40 SPECIFICATIONS Teeth, Adapters, Accessories
AE PE AL
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 740010 268.7 3.94 4.02 29.92 8.90 14.33 17.99 10.79 10
BME 740012 251.1 3.94 4.02 29.92 8.90 14.33 17.99 10.79 10
BE 740014 319.4 4.73 4.85 32.11 8.91 15.54 19.64 11.87 10
BME 740015 299.6 4.73 4.85 32.11 8.91 15.64 19.64 11.87 10
TL 840026 279.7 3.94 4.06 30.47 8.90 18.23 10.75 11.06 15
CM 740501 28.4 9.37 3.94 6.34
AE 740110 141.3 20.51 10.32 1.33 8.27 9.37
PE 740120 131.1 21.02 10.32 1.30 5.08 9.37
AL 840110 163.0 20.91 10.32 1.34 8.19 9.37
SL-lock 740301 4.4 7.89 2.97
ML-lock* 740302
T-tool 700700 3.3
* not yet available
21
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . c Part
o m Inc.toll free 1-888-507-9734
W50 SPECIFICATIONS Teeth, Adapters, Accessories
AE PE
Type Part no Weight Lip Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F G
lb thickness Inch Inch Inch Inch Inch Inch Inch nose angle˚
BE 750010 367.8 4.73 4.85 32.98 9.78 15.74 19.84 11.91 10
BME 750012 341.4 4.73 4.85 32.98 9.78 15.74 19.84 11.91 10
CM 750501 44.0 10.30 4.34 6.98
AE 750110 193.8 22.60 11.40 1.46 9.11 10.33
PE 750120 178.4 23.15 11.40 1.42 5.60 10.33
ML-lock* 750302
T-tool 700700 3.3
* not yet available
22
Combi Wear Parts AB w w w. q cCombi
c a n a Wear
d a . c oPart
m Inc.toll free 1-888-507-9734
Lip Shroud 3’’ SPECIFICATIONS
Type Part. no Angle Weight Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F
lb Inch Inch Inch Inch Inch Inch
˚
MSCL 800401 0° 266.9 3.03 14.57 20.75 13.94 1.34 9.37
MSLL 800402 15° 266.9 3.03 14.57 20.94 13.94 1.34 9.37
MSRL 800403 15° 266.9 3.03 14.57 20.94 13.94 1.34 9.37
MSP 700424 14.3 5.51 5.83 2.13 2.13
WSR 700413 7.3 4.33 2.36 4.13
SL 700303 0.9 2.01 2.36 2.68
Washer 700330
Bolt 700350 2.9
23
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . c Part
o m Inc.toll free 1-888-507-9734
Lip Shroud 3.5’’ SPECIFICATIONS
WSR
Type Part. no Angle Weight Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F
lb Inch Inch Inch Inch Inch Inch
˚
MSCE 700404 0° 176.2 3.62 12.60 19.92 11.34 1.26 8.98
MSLE 700405 15° 176.2 3.62 12.60 20.12 11.34 1.26 8.98
MSRE 700406 15° 176.2 3.62 12.60 20.12 11.34 1.26 8.98
MSCL 800404 0° 261.0 3.62 14.57 20.75 13.94 1.34 9.96
MSLL 800405 15° 261.0 3.62 14.57 20.94 13.94 1.34 9.96
MSRL 800406 15° 261.0 3.62 14.57 20.94 13.94 1.3 9.96
MSP 700424 14.3 5.51 5.83 3.23 2.13
WSR 700413 7.3 4.33 2.36 4.13
SL 700303 0.9 2.01 2.36 2.68
Washer 700330
Bolt 700350 2.9 10.24
24
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . c Part
o m Inc.toll free 1-888-507-9734
Lip Shroud 4’’ SPECIFICATIONS
WSR
Type Part. no Angle Weight Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F
lb Inch Inch Inch Inch Inch Inch
˚
MSCE 700407 0° 242.3 4.06 13.78 22.24 12.72 1.42 10.08
MSLE 700408 15° 242.3 4.06 13.78 22.48 12.72 1.42 10.08
MSRE 700409 15° 242.3 4.06 13.78 22.48 12.72 1.42 10.08
MSCL 800407 0° 372.2 4.06 16.54 23.46 15.83 1.49 11.14
MSLL 800408 15° 372.2 4.06 16.54 23.78 15.83 1.49 11.14
MSRL 800409 15° 372.2 4.06 16.54 23.78 15.83 1.49 11.14
MSP 700425 20.3 6.22 6.54 3.62 2.36
WSR 700414 10.6 4.88 2.65 4.72
SL 700304 0.9 2.2 2.60 2.84
Washer 700331
Bolt 700351 3.9 11.42
25
Combi Wear Parts AB w w w. q cCombi
c a n a dWear
a . c oPart
m Inc.toll free 1-888-507-9734
Lip Shroud 4.73’ SPECIFICATIONS
WSR
Type Part. no Angle Weight Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F
lb Inch Inch Inch Inch Inch Inch
˚
MSCE 700410 0° 337 4.85 15.58 25.44 14.00 2.21 11.52
MSLE 700411 15° 337 4.85 15.58 25.68 14.00 2.21 11.52
MSRE 700412 15° 337 4.85 15.58 25.68 14.00 2.21 11.52
MSP 700426 29.5 6.86 7.22 4.02 2.60
WSR 700415 15.4 5.76 2.92 5.25
SL 700304 0.9 2.21 2.60 2.84
Arandela 700331
Perno 700352 4.4 12.62
26
Combi Wear Parts AB w w w. q cCombi
c a n aWear
d a . cPart
o m Inc.toll free 1-888-507-9734
Our Company
Established 1932, at that time as Bofors Wear Parts.
• Specialized in development of wear parts for construction, mining and dredging.
• Head office in Kristinehamn and production in Ljungby.
• Sales offices in Krefeld, Germany and Chicago, USA.
• Widely spread distribution net work through partners world wide.
• ISO 9001:2000 and IS0 14001:2004 certified.
• Number of employees 2006: 80
• Produced volume in 2006: 5000 ton
Our Production
• Shell moulding of parts 2 - 25 kg/pce.
• Machine moulding of parts >20 - 400 kg/pce.
• 90% of the tonnage are wear parts, i.e. teeth, adapters and shrouds.
• The materials are specially developed to withstand high impact loads and
wear in extreme conditions.
27
QCCANADA DEALER SUPPORT
• Technical support, service and feedback
of products.
• Product training.
• Cost efficency analysis.
• Availability of stock & parts.
28
The Authorized Combi Parts dealer for Western Canada.
QCCANADA
Unit #1 2133 191St.
Surrey, BC. Canada V3Z 3M3
P: 1-888-507-9734
info@qccanada.com
www.qccanada.com