Professional Documents
Culture Documents
INS GAA30782GAB List of Installation Parameters - 2015-05-28
INS GAA30782GAB List of Installation Parameters - 2015-05-28
INS GAA30782GAB List of Installation Parameters - 2015-05-28
: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
GCS – GECB
List of Installation Parameters
Revision History
Date Rev Author Comment
26-Nov-2004 G1530780AAA A. Pfeffer based on TCBC
2005-01-27 G2130780AAA H.-K. Spielbauer Document update after review
2005-01-31 G2130780AAA H.-K. Spielbauer m/s unit adapted
2005-02-25 G2230780AAA H.-K. Spielbauer LW-TYP and BRK-TYP deleted
2005-04-06 GAA30780AAA A. Pfeffer Release
2005-06-08 G1130780AAB A. Pfeffer Compass parameters added
2005-07-14 G1430780AAB A. Pfeffer HL-SET=3, HANDIC-D, HANDIC-R, DEST-
DE, GCB-EN, HBP-POS, HBP-DO, DUTY-HI,
DUTY-LO, EXT-C, EXT-H, EXT-H*10 added
2005-07-21 GAA30780AAB H.-K. Spielbauer Update for Compass Release
2005-08-22 G1530780AAC A. Pfeffer EXT-H*10 removed
2005-10-25 GAA30780AAC A. Pfeffer no changes
2005-10-25 G1530780BAA D. Cominelli Added EN-PRBB
2006-10-20 GAA30780BAA B. Braasch PI-POS,HPI,HPI-OPT,GPI,GPI-POS,GPI-
OPT,FAN-T,LW-TYP,PX2.1, EN-EXT,CTL-
TYP,ANS(kg),PEAK(%),LNS(%),OLD(%),FIX-
PRK,FIX-MASK,PARK-1T->PARK-8T,CBP-
POS,CBP-DO,SHO-POS,SHO-PI,SHO/WCO,
EN-ABL,BRK-TYP,TLD-DW-D,DCB-TYP,
EFO-LOCK,MID-POS,EMT-TYP,EMT-T, EXT-
SEC added; RSL-TYP,MIT-VD blanked ;
Door parameter:14 (Multidrop) added
2007-03-21 GAA30780DAA H.-K. Spielbauer Update DRV-TYP, SEL-COMP, PRK-INT,
CPMT-D / -A / -O, GPI, HPI, PI
2007-04-10 G1130780DAB D. Cominelli Update DOC, DOR-T, RDOR-T
2007-09-17 G1630780DAB A. Pfeffer Removed EN-EVT;
Added HWY-TYP, PI=7, PI-JWL parameters,
REM-TYP=4, CLR-RUN, VIP parameters, EN-
HCC, DBL-OPT, ASL-DO, EPS-TYP=x4x,
RSC-SEC;
Added Parameter Group “11-TIME”;
Added NNR parameters, TFA parameters,
SUMtm, WINtm parameters
2007-11-09 G2030780DAB A. Pfeffer Added F:EN-ACG, R:EN-ACG, CM-PROT,
DW-DLY
2007-11-13 G2130780DAB A. Pfeffer Removed EN-ADM; Limits and Defaults cor-
rected; Corrected description of PKS-TYP;
2007-12-14 GAA30780DAB A. Pfeffer No changes
2008-06-24 G1430780DAC A. Pfeffer Added FAN-TYP, EN-UCMK, EN-CGS,
ASL2-P, RIOT-DO;
Enhanced EN-HLC, PX2.1, DZ-TYP, EN-BAK.
2008-07-22 G1530780DAC A. Pfeffer Removed EFO-LOCK (constant feature)
2008-11-12 G2330780DAC A. Pfeffer Enhanced PX2.1
2008-12-04 GAA30780DAC A. Pfeffer No changes
2009-03-13 G1630780DAD A. Pfeffer Added: BAT-CHRG
Enhanced: REM-TYP, SPB-TYP
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
1. SYSTEM
Note: If the board only supports 1 RSL link, this parameter defines
the type of all position indicators on all links.
If the board supports 3 RSL links, this parameter defines the Car
Position Indicator.
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
1. SYSTEM
Note: If more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
1. SYSTEM
1. SYSTEM
16 HPI-POS 0 Type of Position Info for HPI (also used for DEK): BAA
0 Actual Floor
1 Next Commitable Floor
2 Falling Edge of DZ
Note: If more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
1. SYSTEM
1. SYSTEM
Note: If more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
0 (0.1) 10.0 s
0 = automatic (not yet implemented)
0 (0.1) 10.0 s
0 = automatic (not yet implemented)
1. SYSTEM
0 (0.1) 10.0 s
0 = automatic (not yet implemented)
0 (0.1) 10.0 s
0 = automatic (not yet implemented)
1. SYSTEM
Note: If more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
Note: LR-T is started after the car has become IDLE. As soon as LR-
T has expired the LR output is activated and the ELD (CPI-11) is
switched to Sleep-Mode.
38 CLR-RUN 0 Continue Run with Failed Car Light (I/O 1000 CLR): DAB
0 do not start when car light is off
1 continue run even if car light is off
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
1. SYSTEM
The FAN button is connected to any of the I/Os 1083 FAN, 1084
RFAN, 1085 HCFAN.
The FAN light is connected to any of the I/Os 1086 FANL, 1087
RFANL, 1088 HCFANL.
The FAN relay is connected to I/O 1089 FANR.
1. SYSTEM
0 Disabled
0.1 (0.1) 2.0 s
note: After TCI/ERO the DO2000 needs a new initialization run. Nor-
mally the door is not opened after COR so that the init run is done
upon the first demand which is usually a hall call. Therefore the pas-
senger might wonder about the slow door movement.
With this parameter you can select that the door opens immediately
after completion of a correction run. The door movement for the first
demand will then be done with a normal door profile.
Note: When secure floor exist, prohibited to open door at the secured
floor and no additional PRS installed, rescue to the nearest floor will
be aborted.
1. SYSTEM
1. SYSTEM
Non-REM6 types:
0 REM-5 (LCB_IIC: REM-2, REM-3, REM-SL)
1 REM-G
2 REM-5 (same as REM-TYP=0, if not LCB_IIC)
3 REM-5 for ACG (DW mapped to DO signal) (since DAB)
4 GW1 or REM-5 with new OOS reason (since DAB)
5 as 4, but for ACG (since DAB)
REM6 types:
6 GW2/OAD+ connected to SVT SIO via RS/CAN Converter
(since DAD)
7 GW2/OAD+ connected to Group/Diagnostics CAN bus
(since DAD)
8 GW2/OAD+ connected to Car CAN bus (no group bus OAD
message routing)
(since DAD)
9 REM5+ (Diagnostics+ with Legacy RMH HW but new RMH SW)
(since EAE)
10 OAD+ connected to Car CAN bus for LVA (with group bus OAD
message routing)
(since EAH)
Note: REM-TYP=2 has been added for compatibility with similar soft-
ware baselines. In this baseline REM-TYP=0 and REM-TYP=2 are the
same.
1. SYSTEM
0 disabled
1 (1) 255 s delay for which DFCR output is kept active
after DFC input has been opened
1. SYSTEM
253 disable OLD only if load (%) < 125 % (since EAE)
254 permanent OLD active
255 disabled (OLD disabled for code tests)
IO: 0805 UD
Discrete output P_SP2.4 (GCS222LVA)
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
1. SYSTEM
Note: I/Os 1108 DOBL, 1109 DCBL, 1110 RDOBL, 1111 RDCBL,
1168 WDOBL, 1169 WDCBL, 1172 RWDOBL, 1173 RWDCBL
1. SYSTEM
1. SYSTEM
2. OCSS
0 (1) 99
> 99 Disabled
0 (10) 2540 s
255 disabled
Note:
This parameter must be larger than ARD-T to take effect.
2. OCSS
25 (1) 254 s
255 Disabled (since DAF)
2. OCSS
0 (1) 99
> 99 Disabled
2. OCSS
29 DOMT-O 0 Door Open Message Trigger Option for Vendor type SSM
0 trigger on opening and reopen
1 trigger on opening only
2. OCSS
0 No limit
1 Disabled
2 (1) 253 Number of allowed door reopenings
254 HB works as DOB (HB-DOB)
255 No limit
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
2. OCSS
0 (1) 99
> 99 Disabled
Note: Simplex only
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
2. OCSS
2. OCSS
2. OCSS
2. OCSS
78 CAR-DIR 0 Car direction for the last car call service without hall call EAC
0 Disabled
(The car direction is reversed when the car arrived in a landing
for the last car call service without hall calls)
1 Enabled
(The car direction is not reversed when the car arrived in a landing
for the last car call service without hall calls)
2 Reset (since EAH)
(The car direction is cleared when the car arrived in a landing
for the last car call service without hall calls)
2. OCSS
3. GROUP
example:
This unit moves 1.2 m/s, the others move 1.6 m/s:
(1.6 / 1.2) 4 - 4 = 1.3 --> set RSR-RSP=1 for this unit.
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
3. GROUP
0 (1) 127%
7 (1) 60 s
3. GROUP
0 (1) 99
> 99 Disabled
Note: Limitedly used with Japan GCSS group including car 1 served
at low zone
3. GROUP
0 (1) 99
> 99 Disabled
3. GROUP
0 disabled
1 GSS triggered by remote I/Os GSSI (972),
GSSO (973) for multiple simplex cars
2 GSS triggered by serial group
communication
3. GROUP
Note: If more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
0 (1) 8
3. GROUP
4. DRIVE
2 CAN ICD ≥ 10
MCS220EVO (Lafert Evolux Drive)
3 CAN ICD ≥ 10
MCS220BPE (Otis Low Voltage Drive)
Note:
This parameter is only used for SPB and SP. It is not relevant for
systems without SPB/SP.
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
4. DRIVE
This is the minimum time for which the drive (LSVF-W, OVF20) will be
powered down. The package will not be switched on again until this
time has expired.
8 (1) 20 s
note: only applicable for DRV-TYP = 102
Note: In the drive software, the parameter "6LS-TYP" must also be set
to "1".
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
4. DRIVE
note:
- remote is only possible up to 1m/s (speed ≤1m/s)
- parameter ignored for GECB (1LS, 2LS at GECB always
discrete or remote)
- discrete means at P1:7 & P1:8
- remote means via RSL i/o 692 & 693 (adjusted to an valid
RS-address)
0 (0.1) 25.5 s
note: only applicable for DRV-TYP = 100 / 101
0 (0.1) 25.5 s
note: only applicable for DRV-TYP = 101
4. DRIVE
The elevator is shut down if the Slow Run takes longer than 3P-time.
0 (1) 45 s
Note: This parameter is ignored for VF drives. A fixed value of "255" is
used instead.
0 (1) 254 s
255 wait forever
note: only applicable for LCB_IIC
0 (0.1) 25.5 s
note: only applicable for DRV-TYP ≥ 200
20 UX-D 20 Set Star/Delta gap / add. Soft Time (L+UX) for Hydro: EAD
(contract option)
0 (0.1) 1 s
note: only applicable for DRV-TYP ≥ 200
22 EN-PLS 0 Enable PLS1 (Oil Max-Pressure Limit Switch) for Hydro: EAD
0 Disabled
1 Enabled
4. DRIVE
24 EN-1CL 0 Enable Init_1CL: default position (motorized valve) for Hydro: EAD
0 Disabled
1 Enabled
4. DRIVE
Defines the delay between the start of a run and the beginning of
Brake Current Detection
0 (0.1) 10 s
note: BON-D=15 is recommended for DRV-TYP = 102 / 103 / 104
note: only applicable for LCB_IIC
Defines the maximum time the brake is allowed to drop during a run.
This time is necessary because OVF packages first drop the brake
and afterwards give the information to LCBII that they have stopped
(RN signal)
0 (0.1) 10 s
note: BFLT-T=30 is recommended for DRV-TYP = 102 / 103 / 104
note: only applicable for LCB_IIC
Defines the delay between the end of a run and the beginning of
Brake Current Detection (verification that the brake has dropped)
0 (0.1) 10 s
note: BOFF-D=15 is recommended for DRV-TYP = 102 / 103 / 104
note: only applicable for LCB_IIC
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
5. DOORS
Note:
DOOR=12 requires that also REAR=12 is selected.
DOOR≥11 enable the GENERIC parameters below.
Note:
DOOR=12 requires that also REAR=12 is selected.
REAR≥11 enable the GENERIC parameters below.
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
5. DOORS
Note that for option 1+3, the door lock must stay closed even when
the door motor torque is removed.
5. DOORS
5. DOORS
Note: ACG-2: CMR can only pull if DW is active (i.e. landing door is
closed)
5. DOORS
5. DOORS
Note:
EN81-70 (feature DISAB) requires EN-CK=1
CK = cancel doortime with car button
CBC = cancel registered car call with car button (press twice)
CBCR1 = cancel registered car call with car button (press once) also
during run
CBCR2 = cancel registered car call with car button (press twice) also
during run
This parameter is used to delay pulling CMR after the landing door
has been closed.
0 (0.1) 02.0 s
Note: The power must be switched off and on when this parameter is
changed.
Note: The power must be switched off and on when this parameter is
changed.
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
5. DOORS
Note: The power must be switched off and on when this parameter is
changed.
Note: The power must be switched off and on when this parameter is
changed.
5. DOORS
42 CR-CHK-T 8 Delay to check landing door opened after open command: EAG
When DW is closed after DOR-CHKT since door open command
active, immediately close door under rescue operation with dummy
floor.
0 (0.1) 2 s
0 (0.1) 25.5 s
0 (0.1) 25.5 s
5. DOORS
Note: Applies for MCLS, CLR, SKL, DLM, HAD, 1TH/2TH, DBF
0 (0.1) 25.5 s
54 DCB-EXT 0 Enable DCB when car stops with extended calls: EAC
0 DCB/RDCB/WDCB/RWDCB always disabled when
car stops with extended calls
1 DCB/RDCB/WDCB/RWDCB is enabled when
car stops with extended calls
5. DOORS
6. POS.REF
6. POS.REF
0 (0.004) 1 s (LV-MOD = 0)
Note: only applicable for DRV-TYP ≥ 100
0 (0.004) 1 s (LV-MOD = 2, 4)
Note: only applicable for DRV-TYP ≥ 100
0 (0.004) 1 s (LV-MOD = 2, 4)
Note: only applicable for DRV-TYP ≥ 100
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
6. POS.REF
6. POS.REF
0 (1) 255
Note: only applicable for DRV-TYP ≥ 100
0 (0.1) 25.5 s
Note: only applicable for DRV-TYP ≥ 100
7. SERVICE
1 MRO-DIR 0 Forced Direction of all MRO rescue runs (Penthouse Rescue) EAH
0 No forced direction (direction based on car load)
1 Forced direction UP
2 Forced direction DOWN
Manual rescue operation: SPB drops the brake if the measured car
speed is higher than BRE-MAX.
8. EMERG.
0 (1) 99
> 99 Disabled
8. EMERG.
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
8. EMERG.
17 ASL2-P 255 ASL2 (2nd Alternate Service Landing) position for EFO: DAC
If EFO and FOSS2 inputa are activated, the car will move to ASL-P
instead of EFO-P (e.g. fire at EFO-P)
0 (1) 99
>99 disabled
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
8. EMERG.
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
8. EMERG.
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 2+8 you must program 10)
note: option 1 is incompatible with all other options.
8. EMERG.
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
Note: EN-BAK>0 required for systems with EFS and EFO EN81
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
8. EMERG.
Note: HDW-POS>0 required for systems with EFS and EFO EN81
Note: HDWPOS>0 requires to set EN-BAK>0
Note: “PRS Voltage Buffer Board” is only applicable for OVF20 with
CAN interface.
8. EMERG.
8. EMERG.
8. EMERG.
55 EZ1-UPST 255 Emergency stop limit position in express zone UP: EAE
0(1) 99 Valid floor
100-255 Invalid
56 EZ1-DNST 255 Emergency stop limit position in express zone DOWN: EAE
0(1) 99 Valid floor
100-255 Invalid
9. SECURITY
9. SECURITY
9. SECURITY
note: if more than one of the above options should be available then
you must add the appropriate numbers
(e.g. to select 1+4 you must program 5)
9. SECURITY
9. SECURITY
25 PET-NT 0 PET switch enable interval & door open NT timer: EAE
0 Disabled
1 (1) 25 s
10. TEST
0 (1) 99
> 99 Disabled
10. TEST
17 MON-RATE 1 Rate of CPU monitoring for M-1-1-8 and display to debug monitor
1 (1) 10 s
10. TEST
11. TIME
11. TIME
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
11. TIME
Note: If the feature should be activated at more than one day, add the
corresponding values (e.g. Saturday+Sunday = 65, Monday to Friday
= 62)
Note: Requires that the date/time is set in SVT menu M-1-3-8
12. REI
12. REI
11 DoErr-NT 0 Reference value for door time error at normal floors: EAE
0 Invalid
1 (0.1) 25.5 s
12 DoErr2-P 255 Floor for comparison of the door open/close time and "DoErr2- EAE
T":
0-23 Floor number to check
24-254 Invalid
255 "DoErr2-T" is not used
13 DoErr2-T 0 Reference value for door time error at floor "DoErr2-P": EAE
0 Detection invalid
1 (0.1) 25.5 s
14 DoErr3-P 255 Floor for comparison of the door open/close time and "DoErr3- EAE
T":
0-23 Floor number to check
24-254 Invalid
255 "DoErr3-T" is not used
15 DoErr3-T 0 Reference value for door time error at floor "DoErr3-P": EAE
0 Detection invalid
1 (0.1) 25.5 s
16 LevelErr 0 Reference for re-leveling error detection during the REI: EAE
0 Detection invalid
1-31 +/- 1 to +/- 31 mm
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
12. REI
13. SPEECH
3 SM-DC-T 0 Delay time for announcement of the door close message: EAE
0 Disabled
1 (0.1) 25.5 s
5 SM-DN-T 0 Delay time for announcement of the down direction message: EAE
0 Disabled
1 (0.1) 25.5 s
8 SM-OP-T 0 Delay time for announcement of the door open message: EAE
0 Disabled
1 (0.1) 25.5 s
9 SM-RO-T1 0 Offset time when the Door Close Wait Time is not enough: EAE
0 Disabled
1 (0.1) 25.5 s
10 SM-RO-T2 0 Offset time when the run over time 1 is not enough: EAE
0 Disabled
1 (0.1) 25.5 s
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB
13. SPEECH
13 SM-DC_W 0 While the Elevoa is announcing, enable the door open keeping EAE
function:
0 Disabled
1 Enabled
14. REMOTE
2 EqrTrg-T 0 Elapsed hours since temporary operation after finished EQR: EAE
0 Disabled
1 (1) 255 hours
3 EqrClr-T 0 Seconds to trigger RFS clear alarm after detecting EQR clear: EAE
0 Disabled
1 (1) 255 s
5 RfsEvT-T 0 Seconds to trigger RFS alarm after detecting TRUE of the RFS EAE
event detecting formula:
0 (1) 255 s
6 RfsEvC-T 0 Seconds to clear RFS alarm after detecting TRUE of the RFS EAE
event detecting formula:
0 (1) 255 s
14. REMOTE
Index
BON-D........................................... 47 DBG-MSK2................................... 79
BOTTOM ....................................... 7 DBG-MSK3................................... 79
1 BRE-Max ...................................... 62 DBG-MSK4................................... 79
BRK-TYP ..................................... 43 DBG-MSK5................................... 79
1AT................................................. 44 BTI-P ............................................. 33 DBG-MSK6................................... 79
1LS-D ............................................. 60 BzGong-T ...................................... 16 DBG-MSK7................................... 79
DBG-PORT ................................... 78
2 DBG-PRN2.................................... 78
C DBG-PRNT ................................... 78
2AT................................................. 44 DBG-REI ....................................... 80
CA-MOD....................................... 17 DBG-SOC...................................... 79
2LS-D ............................................. 60 CAR-DIR ...................................... 33 DBL-OPT ...................................... 21
CARD-SWP .................................. 34 DCB-EXT ...................................... 56
3 CB-EXT ........................................ 32 DCB-TYP ...................................... 56
CBP-DO ........................................ 31 DCBZ-TYP ................................. 102
3P 45 CBP-POS ...................................... 31 DCMT-A ....................................... 27
C-CHK .......................................... 17 DCP-T............................................ 25
CCR-OP ........................................ 74 DDP ............................................... 44
6 CFT-NT......................................... 55 DEBUG.......................................... 78
CFT-P .............................................. 7 DEBUG1........................................ 78
6LS-TYP ........................................ 43 CLR-RUN ..................................... 14 DEK-TYP ...................................... 40
CM-D............................................. 51 DEST-DE ...................................... 40
CM-OP-D ...................................... 51 DFCR-DEL ................................... 19
9 CM-PROT .................................... 51 DHB_TK-T ................................... 56
CMPS-LNS ................................... 40 DHB-T ........................................... 55
98 95 CMR-ES ........................................ 52 DHB-TYP ...................................... 28
CM-TYP ....................................... 51 DIS_SCH ....................................... 97
CNL ............................................... 35
A DIS-ARO ....................................... 22
CNL-MIN...................................... 35 DIS-CAN ....................................... 22
CNTY-TYP ................................... 34 DISP-ALL ..................................... 79
ACD/UXT ...................................... 46
COP-COPY................................... 22 DO-BEL ........................................ 53
ADF-POS1 ..................................... 40
CPC-TYP ...................................... 19 DOC ............................................... 28
ADF-POS2 ..................................... 41
CPI-JWL1 ....................................... 8 DO-D.............................................. 51
ADF-POS3 ..................................... 41
CPI-JWL2 ....................................... 9 DoErr2-P ....................................... 99
ANS ................................................ 26
CPI-JWL3 ....................................... 9 DoErr2-T ....................................... 99
ANS(kg) ......................................... 26
CPI-JWL4 ....................................... 9 DoErr3-P ....................................... 99
ARBL-PRK ................................... 24
CPMT-D ....................................... 27 DoErr3-T ....................................... 99
ARBL-T ......................................... 24
CPR-T ........................................... 24 DoErr-NT ...................................... 99
ARD-P ............................................ 24
CR-CHK-T ................................... 55 DOMT-O ....................................... 27
ARD-T............................................ 24
CR-DIR ......................................... 16 DOOR ............................................ 48
ARO-D ........................................... 22
CR-DO .......................................... 16 DOOR-PWR ................................. 49
ASL2-P........................................... 65
CR-OPT ........................................ 16 DOR-T ........................................... 54
ASL-DO ......................................... 65
CRO-TTL ..................................... 74 DRV-TYP ...................................... 42
ASL-P............................................. 65
CTL-DO ........................................ 25 DS-CCB ......................................... 28
ATT ................................................ 26
CTL-P ........................................... 26 DS-DOB ......................................... 28
CTL-TYP ...................................... 26 DS-TKBUZ ................................... 56
B C-TYPE......................................... 44 DTC-T ........................................... 54
DTO-T ........................................... 55
BAT-CHRG ................................... 21 DUPK-CP ...................................... 37
BatRun-T ....................................... 22 D
DUPK-G ........................................ 37
BFLT-T .......................................... 47 DUPK-OPT ................................... 38
DAR-T ........................................... 56
BLC-DCB ...................................... 76 DUPK-P......................................... 37
DBG-MSG .................................... 78
BLC-T ............................................ 76 DUTY-HI....................................... 43
DBG-MSG2 .................................. 78
BLC-TYP ....................................... 76 DUTY-LOW.................................. 43
DBG-MSK0 .................................. 79
BOFF-D ......................................... 47 DW-DLY ....................................... 53
DBG-MSK1 .................................. 79
No.: GAA30782GAB_INS
Software Basic Data
OTIS Draft SCN: GAA30782GAB