Professional Documents
Culture Documents
Tugas Ped 2 - Group 4
Tugas Ped 2 - Group 4
Tugas Ped 2 - Group 4
Example 1
a. P dew point
After entering the component and selecting the base method, click “next” and select “Go to
simulation”
draw the flowsheet, in this simulation using mixer
In example 1 there is some data, then input the data such as temperature 50 oF, vapor fraction
1(dew point), mole-flow component, total flowrate.
In flash type choose “vapor fraction” and “Temperature” because we want to calculate the P dew
After that run the simulation
the results of the simulation (P dew) = 128.226 psia
b. P bubble
To calculate P bubble equal to P dew for components, the base method and flowsheet are
used. The only difference is the inputted vapor fraction data.
Input the known components in Example 1
Choose the base method that will be used, in this simulation using PENG-ROB
After entering the component and selecting the base method, click “next” and select “Go to
simulation”
a. T bubble
Choose the base method that will be used, in this simulation using PENG-ROB
After entering the component and selecting the base method, click “next” and select “Go to
simulation”
After entering the component and selecting the base method, click “next” and select “Go to
simulation”
draw the flowsheet, in this simulation using mixer
In example 2 there is some data, then input the data such as pressure 100 psia, vapor fraction 1
(dew point), mole-flow component, total flowrate.
In flash type choose “vapor fraction” and “Pressure” because we want to calculate the T bubble.
After that run the simulation
The Result of the simulation (T Dew = -52,1914 oC)
Komposisi cair
Mole Fraction
X ethane = 0,642
X ethylene = 0,357