Professional Documents
Culture Documents
Note 1495190 Manual Steps
Note 1495190 Manual Steps
Note 1495190 Manual Steps
J_1BTAXSI5IN
J_1BTAXSI5OUT
J_1BTAXSI4IN
J_1BTAXSI4OUT
Step 2 Change tables
Table J_1BATL5
J_1BATL5V
In the TAB View Fields push the button Table fields, double-click on J_1BATL5, and mark the field:
TAXSITOUT
Move the new entry from the bottom between the lines for the field TAXSIT and DESCRIP.
Maintain behind the field TXT the following new entry:
In the TAB View Fields push the button Table fields, double-click on J_1BATL4A, and mark the field:
TAXSITOUT
Move the new entry from the bottom between the lines for the field TAXSIT and DESCRIP.
Maintain behind the field TXT the following new entry:
View J_1BATL5V:
Call transaction SE54 for maintenance view J_1BATL5V and select 'Generated Objects' (Radiobutton).
Press 'Create/Change' button. Press 'Change' button (F2) on the popup 'Reason for Change' window
select the option 'New field/sec.table in structure' and ‘Create modules’. Press enter. In the next
popup select 'Normal field' and press enter.
Attention: Select only the described options. Otherwise you can destroy the screens.
View J_1BATL4V:
Call transaction SE54 for maintenance view J_1BATL4V and select 'Generated Objects' (Radiobutton).
Press 'Create/Change' button. Press 'Change' button (F2) on the popup 'Reason for Change' window
select the option 'New field/sec.table in structure' and ‘Create modules’. Press enter. In the next
popup select 'Normal field' and press enter.
Attention: Select only the described options. Otherwise you can destroy the screens.
Step 5. Maintain text symbols
Click on the tab ‘Attributes’ and maintain the line and columns to maintain on screen as below:
Layout before changes:
1 – mark text of the field J_1BATL5V-DESCRIP ‘Description’ and with right mouse click delete it.
Move the field J_1BATL5V-DESCRIP on position 1 on the screenshot ‘Layout after changes’
2 – delete field J_1BATL5V-TAXSIT. Select Dictionary/Program fields (F6) and insert J_1BATL5V as
table. Select field J_1BATL5V-TAXSIT and put it to the positions 2 on the screenshot ‘Layout after
changes’. Select Dictionary/Program fields (F6) and insert J_1BATL5V as table. Select field
J_1BATL5V-TAXSITOUT and put it to the positions 7 on the screenshot ‘Layout after changes’.
3 – mark text of the field J_1BATL5V-LINE1 and with right mouse click delete it. Do the same for the
fields J_1BATL5V-LINE2; J_1BATL5V-LINE3; J_1BATL5V-LINE4. Move these fields to positions 3 on the
screenshot ‘Layout after changes’. Extend visible length of the fields to 72.
4 - mark text of the field J_1BATL5V-TXT ‘PIS TS Desc.’ and with right mouse click delete it. Move the
field J_1BATL5V-TXT to position 4 on the screenshot ‘Layout after changes’. Select
Dictionary/Program fields (F6) and insert J_1BATL5V as table. Select field J_1BATL5V-TXT1 and put it
to positions 6 on the screenshot ‘Layout after changes’. Mark the text of the field J_1BATL5V-TXT 1
‘PIS TS Desc.’ and with right mouse click delete it. Maintain J_1BATL5V-TXT1 as output field.
5 – delete the box element VIM_FRAME_FIELD. Insert the new box element with name * J_1BATL5V -
LINE1. Ensure that medium text (option 2) is taken over. The changed box should be placed on
position 5 on the screenshot ‘Layout after changes’.
The attributes of the Box element should look like:
Set field J_1BATL5V-TAXLAW as ‘input required’:
Layout after changes:
Do the same steps for the screen elements listed below and maintain tooltip texts as follow:
J_1BATL5V-LINE1:
J_1BATL5V-LINE2:
J_1BATL5V-LINE3:
J_1BATL5V-LINE4:
-------------------------------------------------------------------------------------------------------------------------------
ONLY FOR RELEASE 4.6C:
Call transaction SE80 for function group J_1BCUSTNEW. Mark the node PBO modules and with right
mouse click create a new module READ_PIS_TAXSITOUT_TEXT in new include LJ_1BCUSTNEWO01.
Click on the tab 'Element list'. Click on the subtab 'General attr.' mark and delete via the button
'Delete' (Schift+F2) following screen elements: *J_1BATL5V-LINE1; *J_1BATL5V-
LINE2;*J_1BATL5VLINE3;*
J_1BATL5V-LINE4;*J_1BATL5V-TXT;J_1BATL5V-LINE1;J_1BATL5V-LINE2;J_1BATL5VLINE3;
J_1BATL5V-LINE4;J_1BATL5V-TXT. See below:
Layout of the Screen SAPLJ_1BCUSTNEW 0008:
Select Dictionary/Program fields (F6) and insert J_1BATL5V as table. Select field J_1BATL5VTAXSITOUT
and chose option text small. Put this field between J_1BATL5V-TAXSIT and J_1BATL5VDESCRIP.
See attributes below:
6.3 Screen SAPLJ_1BCUSTNEW 0007
Click on the tab ‘Attributes’ and maintain the line and columns to maintain on screen as below:
2 – delete field J_1BATL4V-TAXSIT. Select Dictionary/Program fields (F6) and insert J_1BATL4Vas
table. Select field J_1BATL4V-TAXSIT and put it to the positions 2 on the screenshot ‘Layout after
changes’. Select Dictionary/Program fields (F6) and insert J_1BATL4V as table. Select the field
J_1BATL4V-TAXSIT OUT and put it to the positions 7 on the screenshot ‘Layout after changes’.
3 – mark text of the field J_1BATL4V-LINE1 and with right mouse click delete it. Do the same for the
fields J_1BATL4V-LINE2; J_1BATL4V-LINE3; J_1BATL4V-LINE4. Move these fields to positions 3 on the
screenshot ‘Layout after changes’. Extend visible length of the fields to 72.
4 - mark text of the field J_1BATL4V-TXT ‘COFINS_TS_Desc. ‘ and with right mouse click delete it.
Move the field J_1BATL4V-TXT to position 4 on the screenshot ‘Layout after changes’. Select
Dictionary/Program fields (F6) and insert J_1BATL4V as table. Select the field J_1BATL4V-TXT1 and
put it to positions 6 on the screenshot ‘Layout after changes’. Mark the text of the field J_1BATL4V -
TXT 1 ‘PIS TS Desc.’ and with right mouse click delete it. Maintain J_1BATL4V-TXT1 as output field.
5 – delete the box element VIM_FRAME_FIELD. Insert the new box element with name
*J_1BATL4VLINE1. Ensure that medium text (option 2) is taken over. The changed box should be placed
on position 5 on the screenshot ‘Layout after changes’.
The attributes of the Box element should look like:
Set field J_1BATL4V-TAXLAW as ‘input required’:
Layout after changes
Do the same steps for the screen elements listed below and maintain tooltip texts as follow:
J_1BATL4V-LINE1:
J_1BATL4V-LINE2:
J_1BATL4V-LINE3:
J_1BATL4V-LINE4:
---------------------------------------------------------------------------------------------------------------------------
ONLY FOR RELEASE 4.6C:
Call transaction SE80 for function group J_1BCUSTNEW. Mark the node PBO modules and with right
mouse click create a new module READ_COFINS_TAXSITOUT_TEXT in the include
LJ_1BCUSTNEWO01.
Insert source code of the PBO-module READ_COFINS_TAXSITOUT_TEXT as below:
*&---------------------------------------------------------------------*
*& Module READ_COFINS_TAXSITOUT_TEXT OUTPUT
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
MODULE read_cofins_taxsitout_text OUTPUT.
IF NOT j_1batl4v-taxsitout IS INITIAL.
SELECT SINGLE txt FROM j_1btaxsitcoft INTO j_1batl4v-txt1
WHERE langu = sy-langu AND
taxsit = j_1batl4v-taxsitout.
IF sy-subrc NE 0.
CLEAR j_1batl4v-txt1.
ENDIF.
ELSE.
CLEAR j_1batl4v-txt1.
ENDIF.
ENDMODULE. " READ_COFINS_TAXSITOUT_TEXT OUTPUT
-------------------------------------------------------------------------------------------------------------------------------------
Select Dictionary/Program fields (F6) and insert J_1BATL4V as table. Select the field
J_1BATL4VTAXSITOUT and chose option text short. Put this field between J_1BATL4V-TAXSIT and
J_1BATL4VDESCRIP. See attributes below: