Professional Documents
Culture Documents
dl421 Specification Sheet English
dl421 Specification Sheet English
LONGHOLE DRILL
TECHNICAL SPECIFICATION
Length with shank adapter 1 505 mm Rotation pressure controlled feed With One-hole / Fan automation
Diagnostics system Interactive
DRILLING MODULE MySandvik / OptiMine® With configuration readiness
Type of drilling module LFRC1600 (TS2-342)
Rod length 1 220 - 1 830 mm (4’ - 6’) ELECTRIC SYSTEM
Storing capacity 29 + 1 rods (all threads) Standard voltages 380 - 690 V (50 or 60 Hz)
Retaining centralizer Pito 16 Total installed power 119 kW
Cuttings diverter CC1016 Main switch gear MSE 10
Set-off from stope face 2 056 mm IP-classification Specification TS2-132
Feed force 31 kN Allowed voltage fluctuation ± 10%
Feed and return speed 0.3 m/s (fast feed) Starting method Star-Delta (380 - 690 V)
Soft starter (575 V)
DRILLING MODULE DIMENSIONS Automatic cable reel TCR4E
LFRC1606 LFRC1605 LFRC1604 Cable reel remote control At operator station and cable reel
Type
(standard) (option) (option) Front and rear lights
10 x 50 W (24 V) LED
Rod/tube length 6’ (1 830 mm) 5’ (1 525 mm) 4’ (1 220 mm) (combined working and driving)
Total feed length* 3 970 mm 3 665 mm 3 360 mm Carrier positioning lights 2 x Laser type
*) Add 60 mm for bit changer Rear parking / brake lights 2 x Red LED (24V)
Stair and service lights LED (24V)
LONGHOLE BOOM Sealed AGM batteries 2 x 12 V (145 Ah)
Telescopic boom ZR30 (TS2-288)
Boom swing Left 44° / Right 44° AIR AND WATER SYSTEM
Boom (fan) tilt Back 22° / Forward 53° Flushing of holes By water
Drilling module roll-over 360º Water booster pump type WBP3
Boom extension 565 mm Water pump capacity 215 l/min
650
WP
2 000
Front stinger
2 290
2 070 3 000
TS2-273:05/ENG/METRIC © Sandvik Mining and Rock Solutions 2021 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
H
2 050
HR LF1604 LF1605 LF1606 1 030
Length (LF) mm 3 360 3 665 3 970
Height (HF) mm 3 250 3 450 3 700
22° 53°
SANDVIK
3 420 LF
940 360°
2 680
1 765
195 2 100
16° 11°
3 950
C 195 1 425 420
R1 R2 C 3 280 3 530
LF1604 mm 6 800 3 350 4 100 11 250
LF1605 mm 6 900 3 150 4 300
LF1606 mm 7 000 3 050 4 500
All dimensions in mm
Sandvik Mining and Rock Solutions reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
ROCKTECHNOLOGY.SANDVIK