Professional Documents
Culture Documents
Gel-Free Flat Drop Cable + FT-0074-01 + FOSPC-XXX-X-FDLTD30-XX003-US - 1-12 Fibers
Gel-Free Flat Drop Cable + FT-0074-01 + FOSPC-XXX-X-FDLTD30-XX003-US - 1-12 Fibers
OUTDOOR CABLE
Ge l -Fr e e Fl a t Dr o p Ca b l e
FOSPC-XXX-X-FDLTD30-XX003-US / 1-12 Fibers
Description
WO Manufacturing Gel-Free Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Ideal for drop applications, offering
ease of access as well as easy installation. Gel-free water blocking technology allows a cleaner and quicker installation.
Quality
WOManufacturing is a ISO-9001: 2015 certified company.
Applications: Protections:
| FT-0074-01
| Aug 9, 2021
TECHNICAL DATA SHEET
OUTDOOR CABLE
Dimensions and Properties FOSPC-XXX-X-FDLTD30-XX003-US / 1-12 fibers
Design
Fiber count 1 - 12
Fiber color code
Loose tube material / diameter (+ 5%) PBT / 3.0 mm (0.12 in)
Dielectric strength member EAA coated FRP
Outer jacket material Polyethylene
Drum length 4 km, 5,000 ft, 10,000 ft, 15,000 ft, 20,000 ft & 40,000 ft (± 5%)
Temperature range
Operation -40°C to 70°C (-40°F to 158°F)
Installation -30°C to 70°C (-22°F to 158°F)
Storage / transport -40°C to 70°C (-40°F to 158°F)
Mechanical properties
Crush resistance (short-term / long-term) 2,200 N/100mm / 1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Note 1: WO Manufacturing recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation
temperature range specifications for best installation results.
Note 2: for information about the optical fibers transmission performance for the corresponding cable subfamily, consult the document DSDP-DOCU-02.
1 - 12 36 (24) 400 / 1,350 (90 / 303) 8.1 x 4.5 (0.32 x 0.18) 1.5 (0.06)
Note: Please refer to the document "Sag and Tension Guide for Flat Drop Cables" for information about the NESC installation conditions.
| FT-0074-01
| Aug 9, 2021
TECHNICAL DATA SHEET
OUTDOOR CABLE
Mechanical and environmental tests FOSPC-XXX-X-FDLTD30-XX003-US / 1-12 fibers
Test Test method Requirement
Tensile strength (short-term): 1,350 N
Tensile strength (long-term): 400 N
Axial fiber strain under short-term tensile strength:
? 60%of fiber proof strain level
FOTP-33
Cable tensile loading and fiber strain test Axial fiber strain under long-term tensile strength:
FOTP-38 ? 20%of fiber proof test, for fiber proof tested to ? 1%
strain
Increase in attenuation at long-term tensile strength:
? 0.40 dB at 1550 nm for single mode fibers
Short-term load: 2,200 N/100mm
Long-term load: 1,100 N/100mm
Cable compressive test FOTP-41 Increase in attenuation: ? 0.40 dB at 1550 nm for single
mode fibers
Impact energy: 2.9 N*m
No visible cracks, splits, tears or other opening on the
Cable impact test FOTP-25 surface of the outer jacket
Increase in attenuation: ? 0.40 dB at 1550 nm for single
mode fibers
No visible cracks, splits, tears, or other openings on either
the outer or inner surface of the jacket
Cyclic flexing test FOTP-104 Increase in attenuation:
? 0.40 dB at 1550 nm for single mode fibers
No visible cracks, splits, tears, or other openings on the
outer surface of the jacket
Cable twist test FOTP-85 Increase in attenuation:
? 0.40 dB at 1550 nm for single mode fibers
No evidence of fluid leaking from the exposed end of the
Water penetration test FOTP-82 cable sample under test
Print statement and length markings remain discernable
Jacket print test IEC 60794-1-21, Method E2B, Method 2 after testing
Temperature extremes: -40°C and + 70°C
Cable temperature cycling test FOTP-3 Increase in attenuation:
? 0.40 dB at 1550 nm for single mode fibers
Consult W.O. Manufacturing's R&D Department for additional information on cable tests.
| FT-0074-01
| Aug 9, 2021
TECHNICAL DATA SHEET
OUTDOOR CABLE
Drum Dimensions and Pallet Packaging Information FOSPC-XXX-X-FDLTD30-XX003-US / 1-12 fibers
4 km EM-C017
5,000 ft EM-C019
10,000 ft EM-C017
1-12
15,000 ft EM-C011
20,000 ft EM-C011
40,000 ft EM-C007
All drums include*: 3.- Product description (weight, dimensions, lot and part number).
1.- Drum handling instructions. 4.- End cable marking.
2.- Test report certificate. 5.- Both ends include end caps to protect against humidity.
Note 1: please contact your sales agent for higher fiber counts or different drum lengths available.
*Note 2: all documentation included in each drum of cable can be in english or spanish language.
Note 3: for more information about the packaging, consult the document "Packaging Information - Wooden Drum Specifications".
Note 4: for a visual guide of the packaging for U.S.A. and Canada, consult the document DSDP-DOCU-166.
Note 5: for a visual guide of the packaging for Mexico, consult the document DSDP-DOCU-167.
Note 6: for a visual guide of the packaging for OEM products, consult with the R&D Department of W.O. Manufacturing.
| FT-0074-01
| Aug 9, 2021