Professional Documents
Culture Documents
High Pressure Hydraulic Pressure Reducing Regulators: Series
High Pressure Hydraulic Pressure Reducing Regulators: Series
va lv To
s, rc
or
he
at
s
ul
H YDRAU LI C
6000
reg
USTRIES
P RE MIE R IND H I G H P RES SURE
USA
P r e s sur e R e d uc i ng Regul ato r s
Mi
ne
ta
SERIES
n
ap o
oli es
s Minn
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
DESCR IP TION FE AT U R ES
The hydraulic, high pressure Premier 6000 Series • Piston Sensed
pressure reducing regulators are piston sensed, • Main valve cartridge
variable pressure & delivery regulators, designed • Captured venting
for inlet and outlet pressures up to 10000 PSIG • Black anodized aluminum knob
(689.48 bar). 6000 Series regulators feature a wide • Machined bar stock body, bonnet and piston
range of inlet and outlet configurations, Cv: 0.06, eliminates porosity found in castings
0.12, or 0.2, adjustable captured venting, and • Very competitive pricing
compatibility with a broad range of non-corrosive • Numerous optional features available
and corrosive media (based on materials of • NACE MR0175 compatible materials are available
construction).
The Premier 6000 Series pressure reducing regulator’s design is remarkably flexible.
Contact Premier Industries for a custom 6000 Series regulator to meet your exact needs. D/C: 181210
es, and
va lv To
s, rc
or
he
at
s
ul
H YD RAULI C
6000
reg
H I G H P RESSURE INDUS TRIES
P RE MIE R
USA
P r e ss ur e Red uci ng Regul ato r s
Mi
ne
SERIES a
n
ap ot
oli es
s Minn
Ø2.120
• 100-10000 PSIG (6.9-689.5 Bar)
6.9
PREMIER INDUSTRIES
• FLOW CAPACITY P/N 30-10203-XXXXX-XX
• Main Valve Cv: 0.06, 0.12, or 0.20 XX000 PSIG MAX INLET
XX00 PSIG OUT
• Vent Valve Cv: 0.06
• DESIGN PROOF PRESSURE: 150% maximum rated
PROUDLY
MADE
IN
USA
• OPERATING TEMPERATURE:**
3.77
• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (Viton®)
2.03
MAX IN
XX000 PSIG
1.19
• -65°F/-54°C to 165°F/74°C (EPDM)
• 0°F/-17°C to 165°F/74°C (KALREZ®)
• 15°F/-9°C to 165°F/74°C (ALFAS)
.59
• -50°F/-45°C to 165°F/74°C (Nitrile, Lo-temp)
(Part Number: 30-10203 shown above)
MATERIALS OF CONSTRUCTION
• BODY: 316 Stainless Steel (standard)
• BONNET: 17-4 Stainless Steel .81 ØA PORT TYPE ØA FLATS
• PISTON: 316 Stainless Steel IN
• VENT/MAIN VALVE STEM: 17-4 Stainless Steel, hardened NPT, NPTF Ø2.48
• VALVE SEAT: 17-4 Stainless Steel, hardened
• VENT VALVE SEAT: 316 Stainless Steel 1/4” OTHER Ø2.48 2.36
FLATS
OP TIONAL ITEMS
• Air loaded design (P/N: 30-10219)
• Panel mounting bracket: P/N: 30-10059 (Ø2.15 panel hole)
(Ø2.120)
(Ø2.80)
(Ø3.5)
he
at
H YDRAU LI C
s
ul
6000
reg
USA
Mi
SERIES
ne a
n
ap ot
oli es
s Minn
PART # 1 2 - 3 4 5 6 7 - 8 9 MODS
30-10203 - -
Mounting bracket G
MEDIUM
0-200 PSIG 4
0 S PRESSURE
(0-13.8 Bar) OUT IN
6 50-6000 PSIG
(3.4-413.7 Bar) 05 EPDM
9 9/16”**
100-10000 PSIG KALREZ®
7 (6.9-689.5 Bar) 11 (Contact factory for pricing)
(stainless steel only) **1/2” ports not available
in medium pressure 12 NITRILE,
MAIN VALVE Cv **9/16” ports only available LO-TEMP
4 in medium pressure
1 Cv 0.12
2 Cv 0.20
Vent Valve Cv: 0.06
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company. Kel-F® is a registered trademark of 3M Company
AFLAS® is a registered trademark of Asahi Glass Co., Ltd
D/C: 201607
Contact factory for material certifications. Fees may apply.