Professional Documents
Culture Documents
SOLIDWORKS 2016 Weldment Assessment Score Details
SOLIDWORKS 2016 Weldment Assessment Score Details
70 % 11 mins
Topics Questions Percentage
Course Overview 1 0.00 %
Introduction to
1 100.00 %
Weldments
Introduction to
3 100.00 %
Weldments
Wedments
2 50.00 %
Fundamentals
Weldments
1 0.00 %
Introduction
Weldments 1 100.00 %
Introduction
Recommended Courses
SolidWorks 2012 Weldments
2.Which one of the following is the file extension for drawing templates?
*.drwtemp
*.drwdot
*.drwtmp
*.sldtemp
3.Which of the following weldment features is simplified, lightweight, and displays only as a
graphical representation in models?
Fillet Beads
End Treatment
Gussets
End Caps
Weld Beads
4.In addition to standard drawing views, it is possible to create drawing views of individual
weldment bodies.
True.
False.
5.If none of the default weldment profiles match a given design intent, a custom profile can be
used instead.
True.
False.
6.A structural member feature can be applied to both linear or curved sketch entities. True or
False?
True.
False.
7.You can save an existing cut list as a _____________ to use with other weldment drawings.
Cut List Template
Table Template
Defined Cut List
Reusable Cut list
Cut List Table
8.Where can you find the option 'Attach to anchor point' in the drawing document?
Does not exist
Model View Properties
A Drawing Table's PropertyManager
Sheet Properties
9.Using the Trim/Extend tool is the only way to trim intersecting weldment members.
True.
False.
10.If you need to reposition a weldment profile along its path, what option would be used to
accomplish this?
Locate Profile
11.The ___________ tool is used to close the open ends of a structural member.
Cap Member
End Treatment
Extrude-Boss
Close Member
End Cap
12.Which configurations are automatically created in Weldments? Check all that apply.
As Machined
As Stock
As Welded
As Mfg
13.When creating a structural member group, the collection of related segments must remain
continuous end-to-end in order for proper creation of the structural member.
True
False
14.The software also creates two default configurations in the ConfigurationManager: a parent
configuration _________ and a derived configuration __________.
Default[As Machined]
Default[As Welded]
Default Weldment
Default Machined
Parent Welded
Parent Machined
15.Control-dragging an existing plane, with the 3D Sketch tool active, creates a 3D Sketch plane
rather than a reference plane.
True.
False.
True
False
17.When inserting parts into an existing weldment, what option must be checked to place the part
using mates?
Locate Part with Move/Copy Feature
Link
Place Part with Move/Copy Feature
Launch Mates
Define Location
19.Unfortunately, the Move/Copy Body tool cannot be used with weldment parts.
True.
False.