Professional Documents
Culture Documents
Bablieh Elevated Water Tank-300M3 Bill of Quantity
Bablieh Elevated Water Tank-300M3 Bill of Quantity
Bablieh Elevated Water Tank-300M3 Bill of Quantity
BILL OF QUANTITY
1 EARTH WORKS
GENERAL
1. Excavation & Backfilling has been measured net in
cubic meters.
2. No allowance shall be made for increase or extra
working space required and the contractor shall allow for
these and any other incidental expenses in his unit rates
3. Selected excavated material approved by the Engineer
will be used in backfilling around foundations and ground
beams
4. The rates of excavations shall include for excavations in
all types including rock and removing surplus from site to
municipal damps
5. The rates of backfilling shall include for watering, and
compacting in layers max 20cm or as specified- Additional
material necessary to make up levels
6. Temporary retaining boards
1.1 Excavation of any kind of soil for tank foundation m3 235 0.00
1.3
Backfilling with approved materials and carryout filling
operations in the areas indicated and as instructed by the
engineer. The filling shall be placed and compacted in
uniform layers of 20cm thick. m3 195 0.00
Collection 0.00
EARTH WORKS
Carried to summary 0.00
Item Description Unit Qty Unit Price Amount
No $ $
2 CONCRETE WORKS
1. Prices for all concrete items shall include shuttering,
testing for steel reinforcement and concrete, supply and
placing of concrete, vibrating, curing, polyethylene sheet
(for any concrete contact with the soil), painting for
bitumen, underground concrete for external surfaces,
workmanship, all ducts, sleeves, opening areas and the
concrete surface( footing & Roofs) shall be finished with
mechanical steel trowel and the price shall include steel
troweling with smooth face (fair face) and anywhere else,
needed, all according to drawings, specifications,
conditions and directed instructions by the Engineer.
2.1 Supply and cast Plain concrete 17Mpa, 10cm thick below
foundation (base slab) or likes with all required works
m3 12 0
2.2 Supply and cast concrete 35 Mpa for all tank elements with
all required works m3 270 0
2.4 Supply and install non load bearing. Precast Hollow Brick
mansory walling: 12 cm thick with bedding mortar
including pointing and cleaning, reinforced concerte and all
necessary accessories; as per the drawings and Engineer's
instructions.
m2 140 0
2.5 Hourdis blocks 120 mm m2 110 0.00
Collection 0.00
CONCRETE WORKS
Carried to summary 0.00
Item Description Unit Qty Unit Price Amount
No $ $
3 METAL WORKS
Collection 0.00
METAL WORKS
Carried to summary 0.00
Item Description Unit Qty Unit Price Amount
No $ $
4 INSULATION WORKS
GENERAL:
1. Cleaning of internal or external surfaces before
applying the insulation materials.
2. Leakage test should be performed before applying
the insulation paint. The leakage test duration is at least
72 hours.
3. The price includes insulation and leakage tests and
treatment.
4. The contractor shall submit the catalogue of the
insulation material or internal painting indicating the
suitability for drinking water.
5. All the following items shall be completed according
to drawings, specifications, conditions and instructions
by the Engineer or his representative.
6. The contractor should provide the required maintenance
to prevent leakage, honeycomb …etc and surface flatness.
4.1 Supply and install fix approved water stopper solid rubber
strip size 10x250mm cross section at construction joints.
The price shall include workmanship with all required
works.
Lm 40 0.00
4.2 Isolation work for reservoir using cementiceous materiel
(cristoflex or equivalent). Work includes removing the
6mm steel bars with grinder and making small hole then
filling the hole with cementiceous material . Filling the
reservoir with water shoulf be done before islotation work.
m2 330 0.00
m2 95 0.00
Collection 0.00
CONCRETE WORKS
Carried to summary 0.00
Item Description Unit Qty Unit Price Amount
No $ $
5 FINISHES
Collection 0
FINISHES WORKS
Carried to summary 0.00
6 MECHANICAL WORKS
6.1 Supply and instal 5" galvanized steel pipes for inlet, outlet
and overflow, insulation where indicated, anti-corrosion
protection, fitting, bands, hangers, junctions, tees, supports,
sleeves, flexibles wherever there is expansion joint as
indicated on drawings and all necessary accessories, labor,
tools, transport, testing, etc... .
Lm 70 0
6.2 Rain Water Draining System LS 1 0
6.3 Supply and Installation of 5" gate valves, and 1 pressure
relief valve, and all the necessary valves and accessories
LS 5 0
Collection 0
MECHANICAL WORKS
Carried to summary 0.00
HDPE PIPES
Supply and Install High Density Polyethylene HDPE 100
pipes conforming to EN12201 and DIN 8074 complete with
accessories, fittings, supports, expansion joints, brackets,
connections to the main source and to existing pipe
conncted to the water tank, valves and necessary
accessories material and labour to complete the job as
described in the specifcations and drawings .
VALVES
Supply and install valves complete including but not limited
to the following: valves, fittings (Dresser, Flange
Coupling...etc), connectors, fixed, jack and concrete
supports, complete all as described in the Specifications and
as shown on the Drawings and as directed by the Engineer.
COLLECTION
COLLECTION
US$
5 Finishes 0.00