Professional Documents
Culture Documents
Promat Energy - Solar Brochure - English
Promat Energy - Solar Brochure - English
From analysis & 3D modeling to production & assembly Parabolic trough plants • Puertollano Ibersol (ES) 50 MW: Moulded Pipe Section ball joints
Adapted to your specific plant and market • Ain-Ben-Mathar (MA) 20 MW: Flexible ball joint jackets • Shams 1 (UAE) 100 MW: Flexible ball joint jackets and Fire protection
• Ait-Baha (MA) 3 MW: Pipe and TES insulation • Shenzen Jinfan (CN) 50 MW: Flexible hose jackets
Promat’s environment-friendly insulation and fireproofing solutions are designed to meet the most rigorous service requirements. • Andasol 3 (ES) 50 MW: Pipe support insulation • Solaben 1 (ES) 50 MW: BJA flexible hoses + Pipe support insulation
• Ashalim Plot A (IL) 110 MW: TES structural insulation • Solaben 2 (ES) 50 MW: Moulded Pipe Section ball joints
They contain no hazardous materials, are bio-soluble and have no negative impact on the surroundings, equipment and compo- • Arenales (ES) 50 MW: Moulded Pipe Section ball joints • Solaben 3 (ES) 50 MW: Moulded Pipe Section ball joints
nents. • ASE Demo Plant Perugia (IT) 300 kW: Flexible hose jackets • Solaben 6 (ES) 50 MW: BJA flexible hoses and pipe support insulation
• Aste 1A (ES) 50 MW: Moulded Pipe Section ball joints • Solana (USA) 280 MW: Pipe support insulation
Promat’s engineered solutions are developed specifically for each project, using our extensive range of high quality insulation • Aste 1B (ES) 50 MW: Moulded Pipe Section ball joints • Solarcor 1 (ES) 50 MW: Flexible jackets and pipe support insulation
• Astexol 2 (ES) 50MW: Moulded Pipe Section ball joints • Solarcor 2 (ES) 50 MW: Flexible jackets and pipe support insulation
materials covering temperatures from 100°C to 1800°C. • Borges Thermosolar (ES) 22.5MW: • Solnova 1 (ES) 50 MW: Flexible ball joint jackets
Moulded Pipe Section ball joints and pipe support insulation • Solnova 3 (ES) 50 MW: Flexible ball joint jackets
Our global presence allows us to address CSP projects, taking the idiosyncrasies of each country into account. Based on a • Casablanca (ES) 50 MW: Moulded Pipe Section ball joints • Valle 1 (ES) 50 MW: Moulded Pipe Section ball joints
• City of Medicine Hat CS Thermal (CA) 1 MW: • Valle 2 (ES) 50 MW: Moulded Pipe Section ball joints
thorough analysis of the problem, we develop the engineering and design adapted to your specific plant and market.
Flexible ball joint jackets • Xina (ZA) 100 MW: TES structural insulation
• Enea Demo Plant Braccione Lake (IT) 100 kW:
Flexible hose jackets and pipe support insulation Power tower plants
Products & technology • Enerstar Villema (ES) 50MW: Moulded Pipe Section ball joints
and pipe support insulation
• Aora (IL) 100 kW: Target heat shield
• Ashalim Plot B (IL) 121 MW: Outside heat shield
For more than 50 years Promat’s comprehensive product portfolio has been synonymous with quality and reliability, offering a • Extresol 1 (ES) 50 MW: Flexible ball joint jackets • Atacama 1 (CL) 110 MW: TES structural insulation
complete range of insulation and fireproofing solutions. Promat is committed to ongoing R&D, ensuring we remain at the cutting • Extresol 2 (ES) 50 MW: Flexible ball joint jackets • CERSOL (ES) Demo: Outside heat shield and insulation
• Extresol 3 (ES) 50 MW: Moulded Pipe Section ball joints • CRS Sales (ES) Demo: Outside heat shield
edge of technology. • Genesis Solar 1 (US) 125 MW: Pipe support insulation • CTAER (ES) Demo: Target for the geometrical variable tower
• Genesis Solar 2 (US) 125 MW: Pipe support insulation • Gemasolar (ES) 20 MW: Piping, oven boxes and outside heat shield
For our solutions we can choose from a wide range of products: microporous and calcium silicate materials, cementitious sprays, • Guzman (ES) 50 MW: Moulded Pipe Section ball joints • Jülich tower (DE) 1.5 MW: Hot air lines and hot storage vessel,
intumescent products, fibre matrix products (E glass, RCF, AES, Silica and Alumina), refractory products (monolithics and light- • Hassi R’Mel (AL) 25 MW: Flexible ball joint jackets outside heat shield
• Helio Energy 1 (ES) 50 MW: Moulded Pipe Section ball joints • KHI Solar One (ZA) 50 MW: Outside heat shield
weight insulation bricks). • Helio Energy 2 (ES) 50 MW: Moulded Pipe Section ball joints • Lake Cargelligo (AU) 3 MW: Insulation
• Helios 1 (ES) 50 MW: Flexible ball joint jackets • Masdar City Abu Dhabi (UAE) 100 kW: TES structural insulation
• Helios 2 (ES) 50 MW: Flexible ball joint jackets • Noor III (MA) 150 MW: TES Structural insulation
A selection of our brands in CSP • Kaxu Solar One (ZA) 100 MW: Flexible ball joint jackets
• La Africana (ES) 50 MW: Moulded Pipe Section ball joints
• PS 10 (ES) 10 MW: Outside & inside heat shield
• PS 20 (ES) 20 MW: Outside & inside heat shield (partial)
SCUTTHERM® compound material panels, INORSITHERM® high temperature paint, PROMABOARD®-11 for TES structural insula- • La Dehesa (ES) 50 MW: Flexible ball joint jackets • SEDC MSCR Plant (IL) 4 MW: Outside heat shield
• La Florida (ES) 50 MW: Flexible ball joint jackets • Soltrec (ES) Demo: Insulation volumetric receiver
tion, MICROTHERM® jackets and moulded pipe sections, MONOLUX® and PROMASIL® pipe supports, PROMAGLAF® bio-soluble • Lebrija (ES) 50 MW: Moulded Pipe Section ball joints • SOLUGAS (ES) Demo: Outside heat shield
blankets, Cafco FENDOLITE®/PROMASPRAY cementitious sprays. • Manchasol 1 (ES) 50 MW: Moulded Pipe Section ball joints • Sundrop Farms Port Augusta (AU) 36 MW: Outside heat shield
• Manchasol 2 (ES) 50 MW: Moulded Pipe Section ball joints • Tonopah (USA) 100 MW: Outside heat shield (partial)
• Mojave Solar (US) 280 MW: Pipe support insulation
Image: Gemasolar solar thermal plant, owned by Torresol Energy and developed by SENER ©SENER
• Noor I (MA) 160 MW: Pipe support insulation Dish
• Noor II (MA) 200 MW: TES structural insulation • HF Orion (CN) 1 MW: Insulation
• Olivenza (ES) 50 MW: Moulded Pipe Section ball joints
EN 2017-03
All data contained in this publication are provided in good faith and are correct at the time of printing. Data are representative of production and are subject to normal production fluctuations,
they should not be deemed to constitute or imply any warranty of performance, the user is held responsible for determining the suitability of the products for the given application.
Errors and omissions excepted. All drawings and representations remain our exclusive property and cannot be used, totally or in part, without our prior written approval. Excerpts,
reproductions, copies etc. of our publications require our prior approval. This publication renders all previous ones invalid. Our terms of delivery and payment apply in the event of any claim. Promat – Industrial solutions
Promat and Microtherm are registered trademarks. © Copyright Promat International NV, Tisselt, Belgium. All rights reserved.
Making your CSP plant BALL JOINT & ROTARY JOINT ASSEMBLIES
Flexible hoses and swivels
TRANSFORMERS
Heavy-duty blast and fire protection walls
run like clockwork • In parabolic trough collector plants, Promat solutions for ball joints
and rotary joints reduce heat loss to an absolute minimum and
guarantee full design flexibility.
• To protect transformers against high impact and blast pressures, Promat
has developed special heavy duty fire and blast barriers that provide
up to 4 hours of fire protection and maintain structural integrity.
• Our custom-made flexible swivels (with insulation jackets) and rigid • Our modular blast barriers are water, weather and corrosion proof,
swivels (with bright aluminium cladding) are designed to protect the fully demountable and reusable, and have 40 years of proven
Whatever technology is used – parabolic trough joint assemblies and are easy to install or demount for maintenance. service life.
CABLE TRAYS
VALVES
Cable ducts
Thin and lightweight jackets
• Purpose-designed fire protection barriers from Promat
• A custom-made Promat solution for valves in any type of protect cables against fires spreading rapidly through the
solar plant reduces heat loss to an absolute minimum cable tray and ensure the critical valves of the cable tray
without wasting any unnecessary space. remain fully operational during fire.
• Our customised jackets are based on your original CAD • Promat customised fire barriers are slim and lightweight,
designs, can be easily shaped on-site and are easy to install offer high mechanical strength and allow a quick and easy
or demount for maintenance. installation in any kind of environment.
Image: Gemasolar solar thermal plant, owned by Torresol Energy and developed by SENER ©SENER Image: Valle 1 & Valle 2 solar thermal plants, owned by Torresol Energy and developed by SENER ©SENER