Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ADVISORY COMMITTEE

Shri G.Nageswara Rao, Chairman, AERB


Dr. Dinesh Srivastava, Chairman & CE NFC
Shri C.S. Varghese, Executive Director, AERB
Shri D. S. Choudhary, Director (O), NPCIL
Workshop
Dr. L. R. Bishnoi, Director NSARG, AERB (Convener)
Shri Atul Bhandarkar, ED(Eng), NPCIL
Shri S. K. Sinha, Head RED, BARC on
Dr. R. N. Singh, Head MMD, BARC
Dr. P.P. Nanekar, Head PIED, BARC
Shri Avinash Gaikwad, Head NSAD, AERB
Shri A. P. Garg, Head OPSD, AERB
Life Cycle of PHWR
Dr. D. K. Mohapatra, Head SRI, AERB
Coolant Channels
CO-ORDINATORS
Shri Jagannath Mishra Shri V. P. Gholap
Dr. Ritu J. Singh Shri Aniket Gupta
Shri Ramesh Kumar Shri Balbir K. Singh
Shri Prashant Sharma Shri Surya T. A.
Shri Anuj K. Deo

CONTACT:
Ritu J. Singh
SAMSS, SRI, NSARG, AERB
email: ritusingh@aerb.gov.in
Tel: +91-22-25990468
Mobile No. 09167793495

AUGUST 2nd - 5th, 2021


Virtual (TRUECONF)

Organized By
SAFETY RESEARCH INSTITUTE
NUCLEAR SAFETY ANALYSIS AND
RESEARCH GROUP
AERB
TOPICS COVERED
The lectures will be delivered by invited experts
About the Workshop from BARC, NPCIL, NFC and AERB who have made
In PHWR, safety of the pressure tube is of significant contributions through active
paramount importance during operation of the involvement in the design, manufacturing,
reactor. These tubes operate under extreme commissioning, operation and regulation of the
conditions of pressure, temperature, radiation and pressure tubes. Various aspects of the life cycle of
aqueous environment. Safety of the pressure tubes is pressure tubes along with latest developments and
ensured by devising and implementing strategies operational experience will be shared. The major
right from manufacturing stage to the operation topics covered are:
stage. Life management is a very important
component for the safe operation of pressure tubes. Overview of Coolant Channel Design
It involves assessments for ageing degradation like Material and Manufacturing Aspects
diametral expansion, differential longitudinal creep,
Installation and Commissioning of PTs
Objective of the Workshop
sag, evaluation of hydrogen ingress, corrosion etc.
Another important aspect of pressure tubes is the Regulatory Requirements of Coolant Channels The workshop aims to enhance knowledge and
channel replacement activities that give life extension competencies on various aspects of coolant channels.
to the reactor for further operation. Life Management Activities of Coolant Further, the objective of the program is to
Channels. disseminate latest information and developments
Pressure tube manufacturing and design have regarding life management of coolant channels
Operating Experience and Overview of Recent
evolved over a period of time. Newer and advanced including tools and techniques used. The operating
methods are being developed to obtain pressure PT Related Incidents and Observations
experience gained over past 30-40 years of successful
tubes with desirable properties and with stringent En masse Coolant Channel Replacement PHWR operation will also be shared. The program is
control over specifications. Life management of the Activities and Disposal of the Coolant Channels expected to be useful to the utility, R&D units within
pressure tubes has also seen an evolution in terms of DAE and the regulator.
methods and techniques used in inspections and
fitness assessment. Further, several analytical and
experimental programs are undertaken to enhance
our understanding of the degradation mechanisms Who Should Attend
and fitness assessment of pressure tubes based on
the findings from ISI. These developments may be The program is intended for engineers from utilities,
based on regulatory requirements or operational R&D organizations and regulators. It is also suitable
experience. Over past years, experience has also been for experienced technical community seeking latest
enriched in the area En masse coolant channel information on coolant channels as well as young
replacement activity which is an important part of the engineers who wish to gain knowledge directly from
life cycle of pressure tube. the industry and R&D experts.

You might also like