Professional Documents
Culture Documents
Supply Cable: Checking The Oil Temperature Sensor
Supply Cable: Checking The Oil Temperature Sensor
Supply Cable: Checking The Oil Temperature Sensor
Supply cable
1
NOTE! Turn the starter key to the stop position
2
Remove the connector from the sensor. Connect
adapter cable 999 853 4 to cable harness connector to
engine control unit.
3
Use multimeter 9812519 for voltage measurement.
4
Turn the starter key to drive position.
1
NOTE! Turn the starter key to the stop position.
2
Remove the connector from the sensor. Connect
adapter cable 999 8534 to sensor.*
* NOTE! Do not connect the other end of the adapter cable to the
engine cable harness, since this can cause a measurement error.
3
Use multimeter 9812519 to measure the resistance of
the sensor.
Measurement
points Nominal value
Resistance, kΩ
78