The document contains calculations for pile reinforcement of Pile A1 according to SP-16 standards. It calculates the required diameter and spacing of the main and transverse reinforcement based on the pile dimensions and material properties. It then analyzes four cases of axial load and bending moment to determine the required reinforcement ratio. It finds that providing 20 number of T32 diameter bars in 1 layer provides a reinforcement ratio of 1.42%, which satisfies the requirements.
The document contains calculations for pile reinforcement of Pile A1 according to SP-16 standards. It calculates the required diameter and spacing of the main and transverse reinforcement based on the pile dimensions and material properties. It then analyzes four cases of axial load and bending moment to determine the required reinforcement ratio. It finds that providing 20 number of T32 diameter bars in 1 layer provides a reinforcement ratio of 1.42%, which satisfies the requirements.
The document contains calculations for pile reinforcement of Pile A1 according to SP-16 standards. It calculates the required diameter and spacing of the main and transverse reinforcement based on the pile dimensions and material properties. It then analyzes four cases of axial load and bending moment to determine the required reinforcement ratio. It finds that providing 20 number of T32 diameter bars in 1 layer provides a reinforcement ratio of 1.42%, which satisfies the requirements.
Calculation of Pile Reinforcement of Pile A1 as per SP-16
In ULS Codition : Maximum diameter of Main Reinforcement = 32 mm Dia of Transverse Reinforcement = 12 mm Clear Cover = 75 mm Grade of Concrete = M40 Grade of Reinforcement = Fe500 75 mm D Hence d' = 103 mm Overall Depth D= 1200 mm Hence d'/D = 0.086 say = 0.1 12 mm d' 32 mm
Reinforcement: From chart 60 of SP 16
Pu Mux Pu/fckD2 Mxu/fckD3 p/fck = p=
Case I: 155.00 213.00 0.0269 0.031 0.02 0.80 Case II: 12.96 213.00 0.0023 0.031 0.025 1.00 Case III: 173.00 196.00 0.0300 0.028 0.02 0.80 Case IV: 96.27 196.00 0.0167 0.028 0.02 0.80