Professional Documents
Culture Documents
PC500LC-10R Local English Reduction
PC500LC-10R Local English Reduction
SE Spec
HYDRAULIC EXCAVATOR
2
PC500LC-10R
SE Spec
Fuel consumption
Reduced up to 11%
vs PC400LC-8R Komatsu SAA6D125E-5 engine
EU Stage 2 emission equivalent.
Based on typical work pattern collected via KOMTRAX. (CG image)
This fuel consumption data is the result that compared
actual measured value by using the prototype machine.
4
PC500LC-10R
SE Spec
w
ability. Just by select- o
lo
s t
t
u
ing the working mode, E2
m
ou
nt
A dj
a
it provides the best ng e
performance in E 3 worki id
e W Boom floats upward, reducing lifting of machine front.
demanding applica- rg
La This facilitates gathering blasted rock and scraping
down operations.
tions.
Smooth mode Power mode
Fuel Consumption
P (Power mode):
Boom pushing force is increased, ditch digging and
Maximum production box digging operation on hard ground are improved.
Return hoses
In addition to the above modes there are also the following modes. Please select
the appropriate mode according to the application.
Working Mode Application Advantages
• Suitable attachment speed
L Lifting mode • Lifting capacity is increased 7% by raising hydraulic
pressure.
B Breaker mode • Optimum engine rpm, hydraulic flow
Attachment • Optimum engine rpm, hydraulic flow, 2way
ATT/P
Power mode • Power mode
Attachment • Optimum engine rpm, hydraulic flow, 2way
ATT/E
Economy mode • Economy mode
5
HIGHER PRODUCTIVITY
Me Bucket
Ground Bucket
surface movement line
6
PC500LC-10R
SE Spec
7
DURABILITY & RELIABILITY
8
PC500LC-10R
SE Spec
Removes water
Waterproof seal
and contaminants
from fuel to
enhance the fuel
Waterproof seal
system reliability.
Water Cooled Turbo
9
EASY MAINTENANCE
10
PC500LC-10R
SE Spec
Easy cleaning cooling unit Easy maintenance time Clogging sensor for breaker
Cleanability of the cooling unit has management line (Optional)
been improved. It is effective in the The monitor informs replacement
Battery disconnect switch
field of dusty site. time of oil and filters on the LCD
• Improvement core cleanability by when the replacement interval is A battery disconnect switch allows a
enabling openable engine hood reached. technician to disconnect the power
side cover supply and lock out before servicing
• Making oil cooler a single piece or maintenance the machine. Also,
from 3 pieces, no more space minimize discharge of the battery
accumulating dust during long-term non operation.
System operating lamp tells the tim-
ing of disconnect the switch to pre-
vent controller failures.
Blow-by gas
pressure sensor
Other Features
Clogging hydraulic oil filter caution
Easy to check level of
Auto tension for Auto tension for
cooling fan belt compressor fan belt hydraulic oil
11
SAFETY & COMFORT
Rubber
Spring
Silicon
Oil
12
PC500LC-10R
SE Spec
Lock lever auto lock function Seat belt caution indicator Rear view monitor system
If the work equipment lever is not in The operator can
the neutral position when the view the rear of
hydraulic lock lever is released, the the machine with
equipment is automatically stopped. a color monitor
The auto stop state is shown on the screen.
monitor screen.
13
ICT & KOMTRAX
Large Multi-lingual
1 2 3 High Resolution LCD Monitor
A large user-friendly high resolution LCD
7
color monitor enables safe, accurate
and smooth work. Simple and easy to
4 5
operate switches. Function keys
6 facilitate multi-function operations.
Displays data in 15 languages to globally
support operators around the world
8
include bahasa Indonesia.
10 9
Indicators
1 Auto-decelerator 6 Fuel gauge
2 Working mode 7 ECO gauge
1 2 3
3 Travel speed 8 Fuel consumption
Function gauge
switches 4 Engine water
Basic temperature gauge 9 Function switches menu
4 5 6
operation
switches
5 Hydraulic oil 10 Language select
temperature gauge
14
PC500LC-10R
SE Spec
Location
Working status
Periodic maintenance
This report image is an example of The report contents and data depend on the machine model.
hydraulic excavator
15
UT GUARANTEED PRODUCT SUPPORT
products.unitedtractors.com
16
PC500LC-10R
SE Spec
SPECIFICATIONS
SWING SYSTEM
17
DIMENSIONS & WORKING RANGE
31000 kgf
Rating
244 kN
Arm crowd force at power max.
24900 kgf
339 kN
Bucket digging force at power max.
ISO 6015
34600 kgf
Rating
251 kN
Arm crowd force at power max.
25600 kgf
* Including grouser height
Z
(m)
12
11
10
I 9
8
7
6
S 5
4
T
3
2
A 1
Q R 0 G.L
-1
-2
-3
V
U W -4
E C P F -5
-6
G -7
H
-8
N J O
L -9
K (m)13 12 11 10 9 8 7 6 5 4 3 2 1 0
M 2.44
D B Y
X
18
PC500LC-10R
SE Spec
A
PC500LC-10R SE Spec.
A: Reach from swing center Conditions:
B: Arm top pin height • 6670 mm one-piece boom
C: Lifting capacity • 2900 mm arm
Cf: Rating over front • Without bucket
B Cs: Rating over side
G.L. : Rating at maximum reach
C
PC500LC-10R SE Spec. Arm: 2900 mm Without bucket Shoe: 800 mm triple grouser
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *13210 kg 8880 kg *13810 kg 10840 kg *15530 kg 15490 kg
4.5 m 12370 kg 7870 kg *14650 kg 10460 kg *17410 kg 14680 kg *22870 kg 22760 kg
3.0 m 11640 kg 7350 kg 12080 kg 7620 kg *15610 kg 10020 kg *19380 kg 13820 kg
1.5 m 11470 kg 7190 kg 11870 kg 7430 kg 15610 kg 9630 kg *20690 kg 13150 kg
0m 11840 kg 7380 kg 15330 kg 9390 kg *20900 kg 12790 kg *24620 kg 19540 kg
-1.5 m 12920 kg 8010 kg 15250 kg 9320 kg *19910 kg 12700 kg *25680 kg 19590 kg
-3.0 m *13050 kg 9410 kg *13210 kg 9480 kg *17480 kg 12850 kg *22140 kg 19870 kg *26930 kg *26930 kg
-4.5 m *11780 kg *11780 kg *12460 kg *12460 kg *16350 kg *16350 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No.10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
19
STANDARD EQUIPMENT
ENGINE
• Air pre-cleaner • Boom holding valve OPERATOR ENVIRONMENT
• Automatic engine warm-up system • Clogging sensor for hydraulic oil return • A/C with defroster
• Compliant bio diesel fuel filter • AUX equipped with radio
• Coolant filter • Inline filter • Large multi-lingual and high resolution
• Dry type air cleaner, double element • Oil sampling port (Engine & hydraulic) LCD monitor
• Electric priming pump • Pilot filter • Lock lever
• Engine, Komatsu SAA6D125E-5 • Power maximizing system • Operator protective top guard (OPG),
(EU stage 2 emission equivalent) • Pressure Proportional Control (PPC) level 1 (ISO 10262)
• Engine overheat prevention system hydraulic control system • Rear view monitor system
• Fan clutch • Two-mode setting for boom • Rear view mirrors (RH, LH, sidewise,
• Fuel pre-filter (With water separator) • Working mode selection system rear)
• Radiator and oil cooler dust proof net • Seat belt, retractable
GUARDS AND COVERS • Sun roller blind
ELECTRICAL SYSTEM • Fan guard structure • Suspension seat
• Alternator, 24 V/60 A brushless • Heavy duty revolving frame undercover
• Auto-decelerator • Revolving frame deck guard OTHER EQUIPMENT
• Batteries, 2 X 12 V/140 Ah • Track roller guards 3 pcs (Each side) • Blow-by sensor
• Battery disconnect switch with • Counterweight, 10740 kg
operation lamp UNDERCARRIAGE • KOMTRAX
• Electric horn • Hydraulic track adjusters (Each side) • Rear reflector
• Starting motor, 24 V/11 kW • Track frame undercover • Slip-resistant plates
• Working light, 4 (Boom, RH and 2 on • Track roller • Travel alarm
cab) —8 each side
• Track shoe WORK EQUIPMENT
HYDRAULIC SYSTEM —800 mm triple grouser • Arm 2.9 m
• Arm holding valve • Boom 6.67 m
• Bucket 3.8 m3 Me
OPTIONAL EQUIPMENT