Professional Documents
Culture Documents
DOWSIL™ 3-1965 Conformal Coating: Features & Benefits
DOWSIL™ 3-1965 Conformal Coating: Features & Benefits
DOWSIL™ 3-1965 Conformal Coating: Features & Benefits
FEATURES & BENEFITS One-part, transparent, solventless low viscosity conformal coating,
• Low viscosity UL, IPC, and Mil Spec Qualified
• Cures to soft, Low stress elastomer
• UL V-0, Mil-I-46058C, APPLICATIONS
Amendment 7, and IPC-CC-830, DOWSIL™ 3-1965 Conformal Coating is suitable for use with:
Amendment 1 Qualified • Rigid and Flexible circuit boards
• Room temp cure with optional heat • Printed wiring boards (PWB)
acceleration • Sensitive components and fine pitch designs
• UV indicator for inspection
• No added solvents
TYPICAL PROPERTIES
• Room temperature cure, no ovens Specification Writers: These values are not intended for use in preparing
required specifications.
• Mild heat acceleration can speed
in-line processing Property Unit Result
• Low viscosity enhances flow and One or Two part One
fill in narrow gaps and spaces Color Translucent
• Good adhesion allows use with Viscosity cP 115
many low-solids (no clean) and no- Pa-sec 0.1
lead solders Specific Gravity (Cured) 0.99
• Soft coating can improve reliability Tack-Free Time at 25°C minutes 6
Durometer Shore A 33
against stress
Dielectric Strength Volts/mil 425
• Can be considered for uses with kV/mm 17
UL, IPC or Mil Spec requirements Volume Resistivity ohm-cm 8.7 E14
Dissipation Factor at 100 Hz 0.001
COMPOSITION Dissipation Factor at 100 kHz < 0.0002
UL Flammability Classification NA 94 V-0
• One-part Polydimethylsiloxane Mil Specification NA Mil I-46058C Amend 7
conformal coating Agency Listing IPC-CC-830, Amendment 1
®
Trademark of The Dow Chemical Company Form No. 11-3208-01 A