DIMYATI MAKIN CURRICULUM VITAE 2021

Name : Dimyati Makin

Designation : Mechanical Static & Piping Supervisor, Project QA/QC Coordinator,
Inspection Engineer, Plant Inspector
Place/Date of Birth : Serang, February 04th 1977
Nationality : Indonesian
Address : Taman Cilegon Indah (TCI) Block F6/19 Cilegon - Banten - Indonesia
Mobile Phone : +6281293250648/+6281908897466
E-mail Address : dimyati2006@gmail.com
Passport No : C7586926 Date of Expire May 17th 2026
Marital Status : Married
Education : Bachelor Degree (Industrial Engineering)

EMPLOYMENT EXPERIENCE

January 2020 to Present : Mechanical & Piping Construction Supervisor Test pack at PT. Technip FMC for
Cakra Donya Expansion project located at PT. BP Petrochemical Indonesia.
Duties and Responsibilities:

 Prepare daily reports of work progress and man power utilization.

 Prepare weekly reports of the total spool erection, isometric weight installed, welded dia inches
of pipe and joints and the remaining work front with the materials available.
 Co-ordinate with the contractors to achieve the targets and schedule set by the planning.
Issue the work permits ensuring SHE requirements.
 Conduct safety walk through in the site in co-ordination with the safety department on weekly
basis.
 Supervision of all Static equipment and piping works to ensure safety and quality standards of
the client.
 Controlling the work permit prepared by contractor and sub-contractor, ensure the work permit in
accordance with the required of work.
 Monitor work progress installation and modification work accorded with Project Master
Schedule.
 Supervise Equipment and Piping installation also modification work.
 DIMYATI MAKIN CURRICULUM VITAE 2021
 Controlling installation the new equipment and modification of equipment accordance
construction QC procedure, Engineering Specification and Work Method Statement.
 Direct and participate the smoothness of the work installation new equipment and modification
work.
 Conduct Join site inspection to control the installation and modification work accordance with
Construction QC Approved Procedures and Engineering Specifications.
 Conduct coordination with safety and area authority to manage work activity accordance with
safety procedure.
 Responsible and analyzing safety hazards at work area.
 Create daily work progress reports and report to superior related with finding item during
installation.

September 2017 to December 2019: Mechanical/Piping Supervisor/Inspector at PT. Candra Asri

Petrochemical Cilegon Banten for Butadiene expansion and New Polyethylene Project:
Duties and Responsibilities:

 Prepare daily reports of work progress and man power utilization.

 Prepare weekly reports of the total spool erection, isometric weight installed, welded dia inches
of pipe and joints and the remaining work front with the materials available.
 Co-ordinate with the contractors to achieve the targets and schedule set by the planning.
 Issue the work permits ensuring SHE requirements.
 Conduct safety walk through in the site in co-ordination with the safety department on weekly
basis.
 Supervision of all Static equipment and piping works to ensure safety and quality standards of
the client.
 Inspection and approval of all the QA/QC submit table of the contractor.
 Verify the inspection of Material and Test certificates prior to Fabrication,
 Controlling the work permit prepared by contractor and sub-contractor, ensure the work permit in
accordance with the required of work.
 Monitor work progress installation and modification work accorded with Project Master
Schedule.
 Supervise Equipment and Piping installation also modification work.
 Controlling installation the new equipment and modification of equipment accordance
construction QC procedure, Engineering Specification and Work Method Statement.
 Direct and participate the smoothness of the work installation new equipment and modification
work.
 Conduct Join site inspection to control the installation and modification work accordance with
Construction QC Approved Procedures and Engineering Specifications.
 Conduct coordination with safety and area authority to manage work activity accordance with
safety procedure.
 Responsible and analyzing safety hazards at work area.
 Create daily work progress reports and report to superior related with finding item during
installation.
 DIMYATI MAKIN CURRICULUM VITAE 2021
PT. Incoray Nitrama from February 2016 to September 2017: Project and QA/QC Coordinator for New
Sludge Catcher and Train-3 Projects at PT BP LNG Tangguh West Papua Site.
Duties and Responsibilities:
 Control and monitoring of Mechanical Static and piping works of new Sludge Catcher at
Onshore Receiving Facilities
 Prepare daily reports of work progress and manpower utilization report to Project Manager.
 Administer construction activities, ensuring all Static and piping scope of works are achieved in
accordance with the contract requirements and timeframe, and in compliance with approved
specifications and established standards. Identify any potential or actual slippages and discuss
with the Project Manager.
 Supervises scope of works engaged in the Mechanical and piping works to ensure that quality
output is completed on schedule and to the acceptable standards and required specifications.
 Review and Issue the work permits ensuring SHE requirements.
 Conduct safety walk through & site installation in the site, in co-ordination with the safety
department & Construction on weekly basis.
 Liaises with Supervisors, Foreman, Project Engineer related to Test Plans (ITPs) and project
schedule to plan for needed shop inspections on respective, assigned projects. Provides
feedback on types and amounts of inspections based on previous experience, conditions,
selected supplier, etc.

January 2016 to January 2017: Freelance QA/QC Inspector at PT. RINA Indonesia assigned for PT. ENI
Jangkrik Project
Duties and Responsibilities:
 Review WPS and PQR prior to issue
 Conducting PQR and Welder Qualification tests.
 Witness for Visual & Fit up inspection
 Ensure that correct WPS are followed during welding as per specifications
 Liaison with concerned for carrying out site quality audits as per audit schedule and implements
corrective actions as required.
 Maintain approved welders register.
 Ensure implementation of consumable control procedures at workshop.
 Prepare daily inspection reports.
 Check As built mark ups for correctness.
 Monitoring and recording of welding parameters.
 Reports Head of Inspection and QA/QC Manager.
 Verify the Calibration Certificates of welding Equipment and Pressure Gauges,
 Obtain, read and understand the specifications.
 Witness and inspection of surface profile and surface cleanliness.
 Monitoring and inspection of painting storage material.
 Conducting And Witness of WQT & PQR As per Implemented Code and specification.
 Review of Daily Welding Reports,
 Daily monitoring Electrode storage & holding Temperature,
 Carry out Visual Welding Inspection after the welding.
 Review And Witness for UT, MPI, PT, PMI & HARDNESS TESTING,
 Reviewing of Radiography Films, other NDT methods
 Witnessing Pneumatic test, Vacuum box test, Hydro static test
 Reviews of PWHT Charts & Reports,
 Interpretation of radiography.
 DIMYATI MAKIN CURRICULUM VITAE 2021
 Verifying summary and documentation control and ensure all the inspection to be according to
ITP. To assist NDT personal and NDT requirements.
 Random Checking Welding parameters as per WPS Requirement,
 Monitoring Daily Welding Activities as per Approved WPS.
 Expedition the implementation of corrective and preventative actions
 Verify the Calibration Certificates of welding Equipment and Pressure Gauges

August 2015 to November 2015: Static Mechanical and Piping Supervisor/ Inspector assigned at PT.
Candra Asri Petrochemical Cilegon Banten for ECCX Project:
Duties and Responsibilities:

 Prepare daily reports of work progress and man power utilization.

 Prepare weekly reports of the total spool erection, isometric weight installed, welded dia inches
of pipe and joints and the remaining work front with the materials available.
 Co-ordinate with the contractors to achieve the targets and schedule set by the planning.
 Issue the work permits ensuring SHE requirements.
 Conduct safety walk through in the site in co-ordination with the safety department on weekly
basis.
 Supervision of all Static equipment and piping works to ensure safety and quality standards of
the client.
 Inspection and approval of all the QA/QC submit table of the contractor.
 Verify the inspection of Material and Test certificates prior to Fabrication,
 Controlling the work permit prepared by contractor and sub-contractor, ensure the work permit in
accordance with the required of work.
 Monitor work progress installation and modification work accorded with Project Master
Schedule.
 Supervise Equipment and Piping installation also modification work.
 Controlling installation the new equipment and modification of equipment accordance
construction QC procedure, Engineering Specification and Work Method Statement.
 Direct and participate the smoothness of the work installation new equipment and modification
work.
 Conduct Join site inspection to control the installation and modification work accordance with
Construction QC Approved Procedures and Engineering Specifications.
 Conduct coordination with safety and area authority to manage work activity accordance with
safety procedure.
 Responsible and analyzing safety hazards at work area.
 Create daily work progress reports and report to superior related with finding item during
installation.

Oct 2006 to August 2015: Senior Static Plant/Welding/ NDT Inspector at QATAR PETROLEUM (Halul
Island Offshore)

Duties and Responsibilities:

 DIMYATI MAKIN CURRICULUM VITAE 2021
 Supervises the inspection and certification of all plant and equipment in the Halul Crude Oil
Export Facilities Plant, Power Plant and Fuel Gas Plant facilities and ensures that written reports
are compiled as necessary.
 Plans, establishes and supervise Plant Inspection scheduling, reporting and recording systems to
conform with the requirements of Qatar Petroleum accepted code of practice for inspection
and testing. Including liaising with Senior Maintenance Superintendent and Mechanical
Supervisor for scheduling of equipment due for inspection and maintaining on-stream
programme of all crude Export Terminal, Power Plant and Gas facilities.
 Ensures that proper, Site Inspection Report (SIRs), Repair and Recommendations reports are
issued after assessing integrity of plant equipment, including proper identification of damages,
affected areas, and specifications. Also, liaise with Maintenance and MRO (Marine Offshore) for
timely Execution of SIRs.
 Liaises with the Workshops Supervisor to provide inspection services for all works undertaken
by the Workshop. Includes defining specifications and requirements and controlling the
radiographic Facilities.
 Under direction of Head of Inspection, compiles Company codes and standards within his area
of Responsibility and in accordance with Company policies.
 Sets up and maintains comprehensive records of all Plant and equipment and compiles
technical reports and memoranda for Management review as reported through Head of
Corrosion & Inspection for Fitness-for-Service of equipment as needed to ensure their integrity
and safe operation. Coordinate and/or participate in Risk Based Maintenance Inspection (RBMI)
assessment and continuously Improve inspection planning to control risk
 Advices Head of Inspection in preparation/compiling 5-Year Plan and equipment replacement
plans, Including major inspection projects as required in the plants.
 Coordinate Turnaround Inspection works and participates in routine definition meetings. j)
Supervises Outsourced Inspection Contractor and ensures that all shutdown works are properly
inspected. Also, Ensures proper reporting and re-endorsing of equipment for service.
 Provides technical advice to Head of Inspection, to ensure compliance with accepted Company
Standards. Maintains Plant and Equipment ‘overdue for inspection’ schedules and takes
appropriate control action.
 Provides opportunities for training and development of employees under his direction (with
emphasis On Qatar Nationals) and assesses their progress, this includes on-the-job training,
counseling and Proper work delegation.
 A member of QA and QC Project Team which is having duties and responsibilities as the
following:

May 1996 Oct 2006: STATIC PLANT INSPECTOR at PT. AMOCO MITSUI INDONESIA

Duties and Responsibilities:

 Supervises the inspection and certification of all plant and equipment Petrochemical
Plant facilities and ensures that written reports are compiled as necessary.
 Ensures that proper, Inspection Report (IRs), Repair and Recommendations reports are issued
After assessing integrity of plant equipment, including proper identification of damages,
Affected areas, and specifications. Also, liaise with Maintenance Mechanical Supervisor timely
Execution of IRs.
 Liaises with the Workshops Supervisor to provide inspection services for all Works undertaken
by the Workshop. Includes defining specifications and requirements
 DIMYATI MAKIN CURRICULUM VITAE 2021
 Sets up and maintains comprehensive records of all Plant and equipment and compiles
Technical reports for Fitness-for-Service of equipment as needed to ensure their integrity And
safe operation.
 Advices Inspection Supervisor in preparation/compiling 5-Year Plan and equipment replacement
Plans, including major inspection projects as required in the plants.
 Coordinate Turnaround Inspection works and participates in routine definition meetings.
 Supervises Outsourced Inspection Contractor and ensures that all shutdown works are Properly
inspected. Also, ensures proper reporting and re-endorsing of equipment for Service.
 Assesses and advises Head of Inspection the need for the services of specialist contractors and
the Capability of potential contractors to satisfy such needs.
 Provides technical advice to Head of Inspection, to ensure compliance with accepted Company
Standards.
 Maintains Plant and Equipment ‘overdue for inspection’ schedules and takes Appropriate
control action.
 Ensures that safe operating and maintenance procedures related to inspection Activities are
followed, and counsels employees about compliance with safe working Procedures as
necessary.
 Assist and supports engineering Project Department for various Revamp and modification
Projects

Overseas Duty : Year 2001 and 2004: Assisted Inspection activities during off stream on
BP. Chemical Malaysia

September 1995 to May 1996: As Jr. Inspector and Dimensional Inspector at PT. UNITED ENGINEER
INDONESIA

Summary of Duties:
 Verify the inspection of Material and Test certificates prior to Fabrication,
 Witness for Visual & Fit up inspection
 Ensure that correct WPS are followed during welding as per specifications
 Prepare daily inspection reports.
 Check As built mark ups for correctness.
 Monitoring and recording of welding parameters.
 Reports Head of Inspection and QA/QC Manager.
 Verify the Calibration Certificates of welding Equipment and Pressure Gauges,
 Obtain, read and understand the specifications.
 Witness and inspection of surface profile and surface cleanliness.
 Monitoring and inspection of painting storage material.
 Conducting And Witness of WQT & PQR As per Implemented Code and Speciation
 Review of Daily Welding Reports,
 Daily monitoring Electrode storage & holding Temperature,
 Carry out Visual Welding Inspection after the welding.
 Review and Witness for UT, MPI, PT, PMI & HARDNESS TESTING,
 Reviewing of Radiography Films, other NDT methods
 Witnessing Pneumatic test, Vacuum box test, Hydro static test
 Reviews of PWHT Charts & Reports,
 Interpretation of radiographs. Verifying summary and documentation control and ensure all
 Inspection to be according to ITP. To assist NDT personals and NDT requirements.
 DIMYATI MAKIN CURRICULUM VITAE 2021
 Random Checking Welding parameters as per WPS Requirement,
 Monitoring Daily Welding Activities as per Approved WPS.
 Expediting the implementation of corrective and preventative actions
 Verify the Calibration Certificates of welding Equipment and Pressure Gauges.

Specialist Courses:
1). CSWIP 3.2.1 Senior Welding Inspector Certified.
2). Welding Inspector level III C (Senior Welding Inspector) according to IIW (International
Institute Of Welding) and EWF (European Welding Federation). Held by IWES (Indonesian
Welding Engineer Society) and Surakarta Welding Institute and PT. Banda Tiba.
3). Ultrasonic, DPT and Radiography Interpreter Level II PCN
4). API 570 Piping Inspector.
5). API 510 Pressure Vessel Inspector.
6). Ultrasonic Level II ASNT (UT, PT). Expired
7). NDT Level I ASNT (UT, PT, and MT). Expired
8). Radiography Interpreter Level I ASNT. Expired
9). Coating Inspector Level I (NACE). Expired
10). Advance Inspection Training held by PT. Radiant Utama
11). Job Specification Training held by PT IRRIDIA
12). Cathodic Protection Training. Held by PT. Trans Idea Nusantara
13). Video Borescope held by PT. Sucofindo

Safety Courses:
1). T-BOSIET OPITO held by Qatar International Safety Center W.L.L (Aexpired)
2). Contractor Safety Workshop held by PT. AMI (Amoco Mitsui PTA Indonesia)
3). Safety Management and Job Safety Analysis held by PT. Afandi Chandra Putra and PT. AMI
(Amoco Mitsui PTA Indonesia)

General Courses:
1). Basic Training Mechanical Maintenance held by Box Hill Institute Australia
2). Mechanical Training held by PT Siemens Indonesia
3). Rotary Valve training held by Neu Tranf’ Air
4). Computer advanced training (Word, Excel and power Point)

I hereby that all statement in this data are true and correct, to the best of my knowledge and belief

Yours Sincerely,

Dimyati Makin