Professional Documents
Culture Documents
Q.no 1. - Is Used For Critical Loads Where Temporary Power Failure Can Cause A Great Deal of Inconvenience
Q.no 1. - Is Used For Critical Loads Where Temporary Power Failure Can Cause A Great Deal of Inconvenience
testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Seat No -
Total number of questions : 59
PWD10265_POWER ELECTRONICS
Time : 1hr
Max Marks : 50
N.B
1) All questions are Multiple Choice Questions having single correct option.
7) Use only black/blue ball point pen to darken the appropriate circle.
Q.no 1. _________ is used for critical loads where temporary power failure can cause a great deal
of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A:L
B:C
C:R
D:RLC
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 1/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : Anode
B : Gate
C : Base
D : Cathode
A:R
B:L
C:E
D : RLE
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A:π
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 2/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B:0
C : π/2
D : π/4
A : diodes only
B : thyristors only
D : Six SCRs
C : storage of dc power
Q.no 11. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
Q.no 13. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 3/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : DC equivalent of an AC transformer
C : Diode rectifier
Q.no 15. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : rectifier
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 4/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : battery
C : inverter
D : chopper
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
Q.no 21. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A : SCR
B : MOSFET
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 5/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Traic
D : IGBT
Q.no 24. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 26. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 27. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 6/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 30°
B : 60°
C : 90°
Q.no 30. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 31. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 33. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 7/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 30 V
D : 50 V
A : 360
B : 2.5
C : 0.4
D:4
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 37. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 8/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 39. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
C : PWM chopper
D : triangular wave
Q.no 41. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 43. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 9/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Alternator
D : Battery bank
Q.no 44. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
A : AC
B : inverter
Q.no 46. For a full wave bridge inverter, the output voltage (Vo)
Q.no 47. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 48. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 10/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 30
D : 10
Q.no 49. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 50. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 51. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 52. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 53. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 11/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 54. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 55. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 56. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
B : Tj - Ta
C:0
D : Tj
Q.no 58. Safe commutation can be achieved in case of the ____________ operating mode.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 12/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 59. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 2. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
C : storage of dc power
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 13/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 4. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : Anode
B : Gate
C : Base
D : Cathode
A : SCR
B : MOSFET
C : Traic
D : IGBT
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 14/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A:L
B:C
C:R
D:RLC
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
B : DC equivalent of an AC transformer
C : Diode rectifier
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A:R
B:L
C:E
D : RLE
Q.no 15. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
Q.no 18. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 16/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 21. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
Q.no 23. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 24. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 17/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
Q.no 25. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
A : AC
B : inverter
A : 360
B : 2.5
C : 0.4
D:4
A : A,B
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 18/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : D,E
C : A,D
D : B,E
Q.no 30. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 31. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 32. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 33. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 19/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 30°
B : 60°
C : 90°
Q.no 36. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
A : over current
B : over voltage
C : over impedance
D : over admittance
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 20/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 41. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
C : PWM chopper
D : triangular wave
Q.no 43. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 44. Inductor in series with device provides protection against __________ .
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 21/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : over impedance
B : over voltage
C : over current
D : over admittance
Q.no 45. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 46. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 47. For a full wave bridge inverter, the output voltage (Vo)
Q.no 48. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 22/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 49. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
B : Tj - Ta
C:0
D : Tj
Q.no 51. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 52. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 53. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 23/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 54. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 55. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 56. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 57. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 58. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 24/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 360°
D : 150°
Q.no 59. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
A:R
B:L
C:E
D : RLE
Q.no 2. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 4. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 25/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A:L
B:C
C:R
D:RLC
C : storage of dc power
Q.no 9. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 26/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 11. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : 0<α<1
B : 0>α>-1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 27/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 0<=α<=1
D : 1<α<100
B : DC equivalent of an AC transformer
C : Diode rectifier
Q.no 16. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : Anode
B : Gate
C : Base
D : Cathode
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 19. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 28/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C:6
D:8
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
Q.no 22. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : SCR
B : MOSFET
C : Traic
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 29/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : IGBT
Q.no 25. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 27. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 28. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
Q.no 29. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 30/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 360
B : 2.5
C : 0.4
D:4
Q.no 31. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 32. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 33. For a full wave bridge inverter, the output voltage (Vo)
C : PWM chopper
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 31/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : triangular wave
A : AC
B : inverter
Q.no 37. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
A : over current
B : over voltage
C : over impedance
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 32/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : over admittance
Q.no 40. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 42. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 43. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 33/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : IL, V0
Q.no 45. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
A : 30°
B : 60°
C : 90°
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 48. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 49. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 34/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : Vo > Vs
Q.no 50. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 51. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 52. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 53. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 54. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 35/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 55. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 56. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
B : Tj - Ta
C:0
D : Tj
Q.no 58. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 59. Safe commutation can be achieved in case of the ____________ operating mode.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 36/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 180°
B : 120°
C : 360°
D : 150°
C : storage of dc power
A:L
B:C
C:R
D:RLC
A : diodes only
B : thyristors only
D : Six SCRs
A : Ton/Toff
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 37/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : Ton/T
C : T/Ton
D : Toff x Ton
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
Q.no 7. _________ is used for critical loads where temporary power failure can cause a great deal
of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A:3
B:4
C:6
D:8
Q.no 9. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : basic locked DC
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 38/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 11. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : SCR
B : MOSFET
C : Traic
D : IGBT
Q.no 13. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 14. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A : Anode
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 39/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : Gate
C : Base
D : Cathode
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A:R
B:L
C:E
D : RLE
Q.no 18. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
A : 0<α<1
B : 0>α>-1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 40/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 0<=α<=1
D : 1<α<100
B : DC equivalent of an AC transformer
C : Diode rectifier
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 25. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 41/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : over admittance
C : PWM chopper
D : triangular wave
Q.no 27. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 28. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : AC
B : inverter
Q.no 30. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 42/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Vs/(1-α)
D : Vs/√2
Q.no 32. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 34. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 35. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 43/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 36. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
A : 30°
B : 60°
C : 90°
A : 360
B : 2.5
C : 0.4
D:4
Q.no 39. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 40. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 44/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 46. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 47. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 48. For a full wave bridge inverter, the output voltage (Vo)
Q.no 49. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 50. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 46/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 3131.32 A
D : 2131.32 A
Q.no 51. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 52. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 53. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
B : Tj - Ta
C:0
D : Tj
Q.no 55. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 47/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 0.96 A
D : 2.3 A
Q.no 56. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 57. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 58. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 59. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 48/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : DC equivalent of an AC transformer
C : Diode rectifier
A:3
B:4
C:6
D:8
Q.no 3. _________ is used for critical loads where temporary power failure can cause a great deal
of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : SCR
B : MOSFET
C : Traic
D : IGBT
Q.no 5. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 49/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 6. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 7. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 50/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 11. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A:L
B:C
C:R
D:RLC
Q.no 14. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
C : storage of dc power
A : diodes only
B : thyristors only
D : Six SCRs
A : Anode
B : Gate
C : Base
D : Cathode
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : rectifier
B : battery
C : inverter
D : chopper
A:R
B:L
C:E
D : RLE
Q.no 26. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 53/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : over current
D : over admittance
A : A,B
B : D,E
C : A,D
D : B,E
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
C : PWM chopper
D : triangular wave
Q.no 30. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 31. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 54/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Alternator
D : Battery bank
Q.no 32. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 33. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : 360
B : 2.5
C : 0.4
D:4
A : 30°
B : 60°
C : 90°
A : over current
B : over voltage
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 55/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : over impedance
D : over admittance
Q.no 37. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 39. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 40. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 56/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 42. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 44. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 45. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 46. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 57/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 47. For a full wave bridge inverter, the output voltage (Vo)
A : AC
B : inverter
Q.no 49. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
B : Tj - Ta
C:0
D : Tj
Q.no 51. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 58/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 52. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 53. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 54. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 55. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 59/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 240°, 360°
Q.no 56. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 57. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 58. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 59. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 60/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : rectifier
B : battery
C : inverter
D : chopper
A:R
B:L
C:E
D : RLE
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : Anode
B : Gate
C : Base
D : Cathode
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 61/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A:L
B:C
C:R
D:RLC
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A:π
B:0
C : π/2
D : π/4
Q.no 10. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : diodes only
B : thyristors only
D : Six SCRs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 62/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 12. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
Q.no 13. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 63/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 17. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 18. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : SCR
B : MOSFET
C : Traic
D : IGBT
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 64/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 22. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
C : storage of dc power
B : DC equivalent of an AC transformer
C : Diode rectifier
Q.no 25. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 26. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 65/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 27. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
A : AC
B : inverter
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 30. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
A : 360
B : 2.5
C : 0.4
D:4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 66/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 33. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 67/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 37. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 40. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
A : 30°
B : 60°
C : 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 68/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 42. For a full wave bridge inverter, the output voltage (Vo)
C : PWM chopper
D : triangular wave
Q.no 44. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 45. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 46. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 69/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 47. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 48. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 49. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 50. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 51. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 70/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 150°
Q.no 52. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 53. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 54. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 55. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 56. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 71/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 57. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
B : Tj - Ta
C:0
D : Tj
Q.no 59. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
A:R
B:L
C:E
D : RLE
A : basic locked DC
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 72/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : brushless DC
C : brushless AC
D : basic locked AC
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
Q.no 4. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A:L
B:C
C:R
D:RLC
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
Q.no 7. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 73/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : SCR
B : MOSFET
C : Traic
D : IGBT
C : storage of dc power
Q.no 11. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : Ton/Toff
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 74/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : Ton/T
C : T/Ton
D : Toff x Ton
Q.no 13. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : rectifier
B : battery
C : inverter
D : chopper
B : DC equivalent of an AC transformer
C : Diode rectifier
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 75/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 18. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
Q.no 19. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
A : Anode
B : Gate
C : Base
D : Cathode
Q.no 22. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 76/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : negative, positive
D : negative, negative
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : diodes only
B : thyristors only
D : Six SCRs
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 26. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 77/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : IL, V0
Q.no 28. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
A : 360
B : 2.5
C : 0.4
D:4
Q.no 30. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 31. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 32. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 78/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : over current
D : over admittance
Q.no 34. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 35. For a full wave bridge inverter, the output voltage (Vo)
Q.no 37. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 79/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Alternator
D : Battery bank
Q.no 38. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
A : AC
B : inverter
Q.no 40. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 42. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 80/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 30°
B : 60°
C : 90°
C : PWM chopper
D : triangular wave
Q.no 45. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 46. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 81/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 49. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 50. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 51. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 52. If a step up chopper’s switch is always kept off then (ideally)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 82/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 53. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 54. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 55. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 56. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 83/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 57. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 58. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
B : Tj - Ta
C:0
D : Tj
A : diodes only
B : thyristors only
D : Six SCRs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 84/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A:R
B:L
C:E
D : RLE
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
Q.no 6. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 7. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 85/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 8. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A : SCR
B : MOSFET
C : Traic
D : IGBT
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 14. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
A:L
B:C
C:R
D:RLC
Q.no 17. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
B : DC equivalent of an AC transformer
C : Diode rectifier
C : storage of dc power
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 21. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : Anode
B : Gate
C : Base
D : Cathode
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 88/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
Q.no 24. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
Q.no 25. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 26. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 27. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 89/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 28. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 29. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 31. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 90/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 33. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 34. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
A : AC
B : inverter
A : 360
B : 2.5
C : 0.4
D:4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 91/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : over current
B : over voltage
C : over impedance
D : over admittance
C : PWM chopper
D : triangular wave
Q.no 40. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
A : 30°
B : 60°
C : 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 92/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 43. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 44. For a full wave bridge inverter, the output voltage (Vo)
Q.no 46. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 47. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 93/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 49. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
B : Tj - Ta
C:0
D : Tj
Q.no 51. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 52. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 94/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 53. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 54. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 55. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 56. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 57. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 95/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 58. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 59. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 2. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 96/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 5. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A:π
B:0
C : π/2
D : π/4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 97/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 9. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 10. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A:R
B:L
C:E
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 98/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : RLE
Q.no 14. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
Q.no 16. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
A:L
B:C
C:R
D:RLC
A : Anode
B : Gate
C : Base
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 99/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : Cathode
A : SCR
B : MOSFET
C : Traic
D : IGBT
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : diodes only
B : thyristors only
D : Six SCRs
B : DC equivalent of an AC transformer
C : Diode rectifier
C : storage of dc power
Q.no 25. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 27. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
A : 30°
B : 60°
C : 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 101/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 29. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 33. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 102/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 35. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 37. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 38. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 103/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : AC
B : inverter
Q.no 40. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 42. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 43. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 104/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 360
B : 2.5
C : 0.4
D:4
C : PWM chopper
D : triangular wave
Q.no 46. For a full wave bridge inverter, the output voltage (Vo)
Q.no 47. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 48. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 105/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 49. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 50. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 51. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 52. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 53. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 106/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 26
D : 12
Q.no 54. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 55. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 56. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 57. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 58. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 107/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
B : Tj - Ta
C:0
D : Tj
A : Anode
B : Gate
C : Base
D : Cathode
Q.no 5. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
Q.no 6. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A:L
B:C
C:R
D:RLC
Q.no 9. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 109/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : negative, positive
D : negative, negative
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 12. A three-phase bridge inverter requires minimum of _____________ switching devices.
A:3
B:4
C:6
D:8
B : DC equivalent of an AC transformer
C : Diode rectifier
Q.no 14. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 110/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : π/4
A:R
B:L
C:E
D : RLE
A : SCR
B : MOSFET
C : Traic
D : IGBT
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 19. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 111/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : storage of dc power
Q.no 22. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 112/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 1<α<100
Q.no 25. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
A : 30°
B : 60°
C : 90°
Q.no 27. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 29. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 113/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 30 V
D : 50 V
Q.no 31. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 33. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 34. For a full wave bridge inverter, the output voltage (Vo)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 114/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 360
B : 2.5
C : 0.4
D:4
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
A : AC
B : inverter
Q.no 39. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 115/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 560 V
D : 120 V
Q.no 41. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 42. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 43. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 44. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 116/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 46. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 47. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
C : PWM chopper
D : triangular wave
Q.no 49. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 117/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 212.3 w
D : 229.17 w
Q.no 50. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 51. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
B : Tj - Ta
C:0
D : Tj
Q.no 53. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 54. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 118/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 55. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 56. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 57. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 58. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 59. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 119/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A : Anode
B : Gate
C : Base
D : Cathode
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
Q.no 6. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A:3
B:4
C:6
D:8
Q.no 8. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
Q.no 10. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 121/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : π/2
D : π/4
A:R
B:L
C:E
D : RLE
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
Q.no 13. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
B : DC equivalent of an AC transformer
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 122/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Diode rectifier
A : rectifier
B : battery
C : inverter
D : chopper
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 19. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A:L
B:C
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 123/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C:R
D:RLC
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 22. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
A : SCR
B : MOSFET
C : Traic
D : IGBT
C : storage of dc power
A : over current
B : over voltage
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 124/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : over impedance
D : over admittance
Q.no 26. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 27. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
A : AC
B : inverter
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 30. For a full wave bridge inverter, the output voltage (Vo)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 125/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 360
B : 2.5
C : 0.4
D:4
Q.no 33. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
Q.no 34. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 126/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : PWM chopper
D : triangular wave
Q.no 36. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 37. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 38. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 127/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 41. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 42. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 43. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
A : 30°
B : 60°
C : 90°
Q.no 45. Inductor in series with device provides protection against __________ .
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 128/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : over impedance
B : over voltage
C : over current
D : over admittance
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 48. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 49. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 129/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 50. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 51. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 52. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 53. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 54. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 130/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 2131.32 A
Q.no 55. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 56. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
B : Tj - Ta
C:0
D : Tj
Q.no 58. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 59. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 131/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 229.17 w
A:3
B:4
C:6
D:8
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
C : storage of dc power
A : SCR
B : MOSFET
C : Traic
D : IGBT
A:R
B:L
C:E
D : RLE
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 132/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : rectifier
B : battery
C : inverter
D : chopper
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A : Anode
B : Gate
C : Base
D : Cathode
B : DC equivalent of an AC transformer
C : Diode rectifier
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 13. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
A:L
B:C
C:R
D:RLC
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
A : dc power to dc power
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 134/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
Q.no 18. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
Q.no 19. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 135/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 22. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 23. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
Q.no 24. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 25. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 26. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 136/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 27. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 29. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 31. __________ is used in the rotating type UPS system to supply the mains.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 137/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : DC motor
C : Alternator
D : Battery bank
A : over current
B : over voltage
C : over impedance
D : over admittance
C : PWM chopper
D : triangular wave
A : AC
B : inverter
Q.no 35. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 138/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 38. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 39. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
Q.no 40. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 139/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 41. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
Q.no 42. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
A : 30°
B : 60°
C : 90°
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
A : 360
B : 2.5
C : 0.4
D:4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 140/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 46. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
A : A,B
B : D,E
C : A,D
D : B,E
Q.no 48. For a full wave bridge inverter, the output voltage (Vo)
Q.no 49. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 50. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 141/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 2131.32 A
Q.no 51. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
B : Tj - Ta
C:0
D : Tj
Q.no 53. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 54. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 55. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 142/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : Vo > Vs
Q.no 56. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 57. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 58. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 59. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
A:R
B:L
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 143/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C:E
D : RLE
A:3
B:4
C:6
D:8
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : SCR
B : MOSFET
C : Traic
D : IGBT
A:π
B:0
C : π/2
D : π/4
A:L
B:C
C:R
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 144/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D:RLC
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
Q.no 8. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : Anode
B : Gate
C : Base
D : Cathode
Q.no 11. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 145/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : RCCB
A : diodes only
B : thyristors only
D : Six SCRs
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 14. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 146/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : rectifier
B : battery
C : inverter
D : chopper
Q.no 19. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
C : storage of dc power
Q.no 21. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 147/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : DC equivalent of an AC transformer
C : Diode rectifier
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
Q.no 26. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 148/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 27. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 28. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
Q.no 29. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 30. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
A : 360
B : 2.5
C : 0.4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 149/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D:4
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 33. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
Q.no 35. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 36. For a full wave bridge inverter, the output voltage (Vo)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 150/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : A,B
B : D,E
C : A,D
D : B,E
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 39. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
Q.no 40. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
C : PWM chopper
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 151/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : triangular wave
Q.no 42. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : 30°
B : 60°
C : 90°
Q.no 44. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 45. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 152/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : AC
B : inverter
Q.no 49. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
Q.no 50. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 51. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 153/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 2.4 A
Q.no 52. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 53. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 54. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 55. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 56. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 154/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 3131.32 A
D : 2131.32 A
B : Tj - Ta
C:0
D : Tj
Q.no 58. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 59. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : Anode
B : Gate
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 155/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Base
D : Cathode
Q.no 3. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
A:3
B:4
C:6
D:8
Q.no 5. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
Q.no 6. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 7. _________ is used for critical loads where temporary power failure can cause a great deal
of inconvenience.
A : SMPS
B : UPS
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 156/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : MPS
D : RCCB
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
Q.no 11. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
A : SCR
B : MOSFET
C : Traic
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 157/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : IGBT
Q.no 13. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : diodes only
B : thyristors only
D : Six SCRs
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 158/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 1<α<100
A : rectifier
B : battery
C : inverter
D : chopper
B : DC equivalent of an AC transformer
C : Diode rectifier
A : dc motor drive
B : UPS
C : electric vehicle
D : inverter
A:R
B:L
C:E
D : RLE
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 159/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A:L
B:C
C:R
D:RLC
C : storage of dc power
Q.no 26. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
Q.no 27. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 160/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : PWM chopper
D : triangular wave
Q.no 29. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 30. For a full wave bridge inverter, the output voltage (Vo)
A : A,B
B : D,E
C : A,D
D : B,E
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 161/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 34. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 35. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
A : 360
B : 2.5
C : 0.4
D:4
Q.no 37. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 162/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 120 V
A : 30°
B : 60°
C : 90°
Q.no 39. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
Q.no 40. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 41. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 163/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 44. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : AC
B : inverter
A : over current
B : over voltage
C : over impedance
D : over admittance
Q.no 47. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 164/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
D : 10
Q.no 48. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
Q.no 49. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
B : Tj - Ta
C:0
D : Tj
Q.no 51. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 52. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 165/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : 212.3 w
D : 229.17 w
Q.no 53. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 54. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 55. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
Q.no 56. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
Q.no 57. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 166/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 58. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 59. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
A : 0<α<1
B : 0>α>-1
C : 0<=α<=1
D : 1<α<100
A:3
B:4
C:6
D:8
A : dc motor drive
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 167/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : UPS
C : electric vehicle
D : inverter
A : Ton/Toff
B : Ton/T
C : T/Ton
D : Toff x Ton
A : basic locked DC
B : brushless DC
C : brushless AC
D : basic locked AC
C : storage of dc power
A:L
B:C
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 168/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C:R
D:RLC
Q.no 10. The minimum value of anode current below which it must fall to completely turn-off the
device is called as the
Q.no 11. The average output voltage is maximum when SCR is triggered at ωt =
A:π
B:0
C : π/2
D : π/4
A : dc power to dc power
B : dc power to ac power
C : ac power to ac power
D : ac power to dc power
B : DC equivalent of an AC transformer
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 169/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Diode rectifier
A : diodes only
B : thyristors only
D : Six SCRs
Q.no 15. The output voltage from a single phase full wave bridge inverter varies from
A : Vs to –Vs
B : Vs to zero
C : Vs/2 to zero
D : –Vs/2 to Vs/2
Q.no 16. _________ is used for critical loads where temporary power failure can cause a great
deal of inconvenience.
A : SMPS
B : UPS
C : MPS
D : RCCB
A : Anode
B : Gate
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 170/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Base
D : Cathode
Q.no 19. single quadrant operation in DC chopper provides _____ Vo and _____ Io.
A : positive , positive
B : positive, negative
C : negative, positive
D : negative, negative
Q.no 21. A three-phase three pulse type controlled converter is constructed using 3 SCR devices.
The circuit is supplying an R load with α < 30°. As such, each SCR device would conduct for
A : rectifier
B : battery
C : inverter
D : chopper
A : SCR
B : MOSFET
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 171/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : Traic
D : IGBT
A:R
B:L
C:E
D : RLE
C : PWM chopper
D : triangular wave
Q.no 27. circuit breaker provides protection against surge currents lower than ________surge
current rating of device.
A : half-cycle
B : one-cycle
C : two-cycle
D : sub-cycle
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 172/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 29. For a full wave bridge inverter, the output voltage (Vo)
A : 360
B : 2.5
C : 0.4
D:4
Q.no 31. __________ is used in the rotating type UPS system to supply the mains.
A : DC motor
C : Alternator
D : Battery bank
Q.no 32. Find the expression for output voltage for a step-up chopper, assume linear variation of
load current and α as the duty cycle.
A : Vs
B : Vs/α
C : Vs/(1-α)
D : Vs/√2
A : over current
B : over voltage
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 173/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
C : over impedance
D : over admittance
Q.no 35. Find the output voltage for a step-up chopper when it is operated at a duty cycle of 50
% and Vs = 240 V.
A : 240 V
B : 480 V
C : 560 V
D : 120 V
Q.no 36. Find the output voltage expression for a step down chopper with Vs as the input voltage
and α as the duty cycle.
A : Vo = Vs/α
B : Vo = Vs x α
C : Vo = Vs2/α
D : Vo = 2Vs/απ
A : A,B
B : D,E
C : A,D
D : B,E
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 174/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 39. If the cathode of an SCR is made positive with respect to the anode & no gate current is
applied then
A : AC
B : inverter
Q.no 41. determine the efficiency of the ups if input power is 330 W and output power is 300 W.
A : 90.9
B : 111
C : 30
D : 10
Q.no 42. A single-phase full controlled converted with RLE load will act like a line-commutated
inverter when the firing angle α
A : α > 180°
B : α > 90°
C : α < 90°
D : α = 90°
Q.no 43. A single-phase two pulse converter feeds RL load with a sufficient smoothing such that
the load current does not fall to zero. If the resistance of the load circuit is increased then the
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 175/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 44. Inductor in series with device provides protection against __________ .
A : over impedance
B : over voltage
C : over current
D : over admittance
A : Vo , Vin
B : Vin, Vo
C : Vo, IL
D : IL, V0
Q.no 46. find minimum input voltage required to 10 LED lamp circuit produces Io= 5 mA, Po=
250 mW
A : 10 V
B : 20 V
C : 30 V
D : 50 V
Q.no 47. A motor load is connected to a single-phase full converter B-2 type controlled rectifier.
The net energy is transferred from ac source to the motor (dc load) when
A : π+α > 90
B : π-α > α
C : π+α > α
D : π-α > 90
A : 30°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 176/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
B : 60°
C : 90°
Q.no 49. The major drawback of the first generation IGBTs was that, they had
A : The major drawback of the first generation IGBTs was that, they had
C : sluggish operation
Q.no 50. find average power dissipation for given Tj = 125°C , Ts = 70°C , Фjc = 0.16 °C /w, Фcs
= 0.08 /w
A : 70.71 w
B : 125. 12 w
C : 212.3 w
D : 229.17 w
B : Tj - Ta
C:0
D : Tj
Q.no 52. A single-phase half wave circuit has Vs = 230 V with a R load of 100 Ω. Find the average
load current at α = 30°.
A : 1.45 A
B : 0.57 A
C : 0.96 A
D : 2.3 A
Q.no 53. An SCR has half cycle surge current rating of 3000 A at 50 Hz. Calculate its one-cycle
surge current rating
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 177/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
A : 3121.32 A
B : 2121.32 A
C : 3131.32 A
D : 2131.32 A
Q.no 54. determine the AH rating of the battery if current is 30 A and battery back up time is 4
hrs.
A : 7.5
B : 120
C : 26
D : 12
Q.no 55. Safe commutation can be achieved in case of the ____________ operating mode.
A : 180°
B : 120°
C : 360°
D : 150°
Q.no 56. A step down chopper is operated at 240V at duty cycle of 75%. Find the value of RMS
switch (IGBT/MOSFET) current. Take R = 10 Ω.
A : 2.07 A
B : 200 mA
C : 1.58 A
D : 2.4 A
Q.no 57. If T1 is gated at 0 °, T3 and T5 will start conducting at _______ and _________
respectively
A : 180°, 270°
B : 120°, 240°
C : 180°, 300°
D : 240°, 360°
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 178/179
12/25/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15
Q.no 58. A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR.
At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the
SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo
A : falls to zero
C : rises to Vm sin α
D : rises to Vm sin ωt
Q.no 59. If a step up chopper’s switch is always kept off then (ideally)
A : Vo = 0
B : Vo = ∞
C : Vo = Vs
D : Vo > Vs
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=5841&code=1052000&showTest=319&actForm=edit&set=15 179/179