Professional Documents
Culture Documents
Metrology 5
Metrology 5
Metrology 5
For calibrating depth error of all types of caliper depth rods, outside accuracy inspection
and zero setting of depth micrometers, depth calipers, dial depth gauges.
Made of heat treated hardened tool steel, hardness: HRC58-62.
Checker body and base are chromed polished, wear resistant, and rust resistant to ensure
measuring accuracy and durability.
Checker face dimension tolerance:±0.003mm parallelism and flatness max error: 0.002mm
The measuring gauge does not need to be twisted at all, and only a simple stacking
combination can ensure the accuracy requirements of the measurement specifications
The surface of measuring gauge must be kept clean and free of defects, when stacking gauge,
use two or more pins to insert in the positioning holes to fix it.
Inspection reading: 0.1um
50mm
Measuring
gauge
CDC-400D
75mm
Measuring
gauge
CALIBRATOR K4
Cylinder Depth Checker Depth of caliper
calibration
Can be calibrated the depth error with 5mm
as a step specification, the maximum depth Depth caliper
or height measuring range is 400mm. calibration
Depth micrometer
Dial Depth gauge calibration & zero setting
calibration & zero setting
K5 CALIBRATOR