This document describes a project to create a 7-segment LED display using a 74HC595 shift register and an SPI interface to control the display. The shift register is used to multiplex the LED segments and reduce the number of I/O pins needed from the microcontroller. The SPI interface allows easy communication from the microcontroller to the shift register for displaying values on the 7-segment LEDs.
This document describes a project to create a 7-segment LED display using a 74HC595 shift register and an SPI interface to control the display. The shift register is used to multiplex the LED segments and reduce the number of I/O pins needed from the microcontroller. The SPI interface allows easy communication from the microcontroller to the shift register for displaying values on the 7-segment LEDs.
This document describes a project to create a 7-segment LED display using a 74HC595 shift register and an SPI interface to control the display. The shift register is used to multiplex the LED segments and reduce the number of I/O pins needed from the microcontroller. The SPI interface allows easy communication from the microcontroller to the shift register for displaying values on the 7-segment LEDs.
This document describes a project to create a 7-segment LED display using a 74HC595 shift register and an SPI interface to control the display. The shift register is used to multiplex the LED segments and reduce the number of I/O pins needed from the microcontroller. The SPI interface allows easy communication from the microcontroller to the shift register for displaying values on the 7-segment LEDs.
7 Segment LED Based SPI Display using 74HC595 - Electronics-Lab.com https://www.electronics-lab.com/project/7-segment-led-based-spi-display...
1 από 3 05/12/2020, 16:18 μ.μ.
7 Segment LED Based SPI Display using 74HC595 - Electronics-Lab.com https://www.electronics-lab.com/project/7-segment-led-based-spi-display...
2 από 3 05/12/2020, 16:18 μ.μ.
7 Segment LED Based SPI Display using 74HC595 - Electronics-Lab.com https://www.electronics-lab.com/project/7-segment-led-based-spi-display...
3 από 3 05/12/2020, 16:18 μ.μ.
This document was created with the Win2PDF “print to PDF” printer available at http://www.win2pdf.com This version of Win2PDF 10 is for evaluation and non-commercial use only. This page will not be added after purchasing Win2PDF. http://www.win2pdf.com/purchase/