Professional Documents
Culture Documents
Car Care Program
Car Care Program
Car Care Program
320-
320-808-
808-5972
CBDESIGNSLLC.COM
C LINT.BACHMANN@GMAIL.COM
LEGAL DISCLAIMER
These drawings have been prepared to meet
generally accepted professional standards and
practices and have been developed without
knowledge or reference to a specific site or
geographical area. Therefore, supplemental to these
documents, it is the owner and his/her builder’s
responsibility to follow the material and equipment
manufactures instructions, and to use accepted
standards for each building trade. Topographic and
subsurface conditions should be verified and
foundation plans adapted accordingly. Before
starting construction, the builder should check and
be responsible for all dimensions and other details,
and should review the plans for compliance with
governing code requirements for the geographic
area in which the house is to be built. All structural,
mechanical and electrical requirements should also
be reviewed before construction begins. Codes
govern over drawings and dimensions govern over
scale. The owner should check with the local building
department to see if a professional stamp is
required on the drawings for permit purposes. It is
suggested that a local architect be retained to
review and make any changes necessary to ensure
that the plans meet the above requirements. Any use
of this information without adaptation to changes
and codes, standards, site conditions and other
factors is at the owner’s sole risk. The designer
assumes no responsibility for changes made to
these plans by others and makes no warranties,
either expressed or implied, regarding these plans.
The owner agrees to defend and indemnify the
designer for all claims, costs, losses or damages
resulting from the use of this information.
Authorization of the use of this plan is on the
express condition that you comply with all local
LEFT
1/8" = 1'-
1'-0"
C COPYRIGHT 2019
These drawings are the property of the
designer and are protected by federal
copyright law. Any unauthorized use or
reproduction of these plans is prohibited by
law.
ROOF
24' - 11 1/2"
CAR CARE
10' - 5 1/2"
CAR CARE T.O. MAIN FLOOR
3' - 0 5/8"
PROGRAM LOGO 14' - 6"
SECOND FLOOR
11' - 5 3/8"
14' - 0"
OPTIONAL
10' - 11 3/8"
SPONSORSHIPS
SIGN
MAIN FLOOR
0' - 6" Designer: CLINT
0' - 6"
FRONT E L E V A T IO N S
1/8" = 1'-
1'-0"
A1
CLINT BACHMANN
320-
320-808-
808-5972
CBDESIGNSLLC.COM
C LINT.BACHMANN@GMAIL.COM
LEGAL DISCLAIMER
These drawings have been prepared to meet
generally accepted professional standards and
practices and have been developed without
knowledge or reference to a specific site or
geographical area. Therefore, supplemental to these
documents, it is the owner and his/her builder’s
responsibility to follow the material and equipment
manufactures instructions, and to use accepted
standards for each building trade. Topographic and
subsurface conditions should be verified and
foundation plans adapted accordingly. Before
starting construction, the builder should check and
be responsible for all dimensions and other details,
and should review the plans for compliance with
governing code requirements for the geographic
area in which the house is to be built. All structural,
mechanical and electrical requirements should also
be reviewed before construction begins. Codes
govern over drawings and dimensions govern over
scale. The owner should check with the local building
department to see if a professional stamp is
required on the drawings for permit purposes. It is
suggested that a local architect be retained to
review and make any changes necessary to ensure
that the plans meet the above requirements. Any use
of this information without adaptation to changes
and codes, standards, site conditions and other
factors is at the owner’s sole risk. The designer
assumes no responsibility for changes made to
these plans by others and makes no warranties,
either expressed or implied, regarding these plans.
The owner agrees to defend and indemnify the
designer for all claims, costs, losses or damages
resulting from the use of this information.
Authorization of the use of this plan is on the
express condition that you comply with all local
C COPYRIGHT 2019
RIGHT These drawings are the property of the
1/8" = 1'-
1'-0" designer and are protected by federal
copyright law. Any unauthorized use or
reproduction of these plans is prohibited by
law.
CAR CARE
Designer: CLINT
7/22/2021 9:00:46 PM
E L E V A T IO N S
REAR
1/8" = 1'-
1'-0"
A 1.2
CLINT BACHMANN
320-
320-808-
808-5972
CBDESIGNSLLC.COM
C LINT.BACHMANN@GMAIL.COM
LEGAL DISCLAIMER
These drawings have been prepared to meet
generally accepted professional standards and
practices and have been developed without
knowledge or reference to a specific site or
geographical area. Therefore, supplemental to these
documents, it is the owner and his/her builder’s
responsibility to follow the material and equipment
manufactures instructions, and to use accepted
standards for each building trade. Topographic and
subsurface conditions should be verified and
foundation plans adapted accordingly. Before
starting construction, the builder should check and
be responsible for all dimensions and other details,
and should review the plans for compliance with
governing code requirements for the geographic
area in which the house is to be built. All structural,
mechanical and electrical requirements should also
be reviewed before construction begins. Codes
govern over drawings and dimensions govern over
scale. The owner should check with the local building
department to see if a professional stamp is
CAR required on the drawings for permit purposes. It is
LIFT suggested that a local architect be retained to
review and make any changes necessary to ensure
that the plans meet the above requirements. Any use
of this information without adaptation to changes
and codes, standards, site conditions and other
factors is at the owner’s sole risk. The designer
CAR assumes no responsibility for changes made to
LIFT these plans by others and makes no warranties,
either expressed or implied, regarding these plans.
The owner agrees to defend and indemnify the
42' - 6 1/2"
designer for all claims, costs, losses or damages
resulting from the use of this information.
+/-
Authorization of the use of this plan is on the
express condition that you comply with all local
C COPYRIGHT 2019
EXISTING CAR These drawings are the property of the
designer and are protected by federal
LIFT
EXISTING copyright law. Any unauthorized use or
reproduction of these plans is prohibited by
law.
CAR
LIFT
5' - 0" X 3' - 6" INT. GLASS 5' - 0" X 3' - 6" INT. GLASS
3' - 0"
UP
10' - 1 1/8"
CAR CARE
CEILING HIEGHT
MEETING ROOM
ONLY
T.V.
12' - 1" 25' - 0"
+/-
16' - 0"
3' - 0" POST LOCATION
MEETING
3' - 0"
3' - 0" OPNG
9' - 6"
3' - 0" CEILING
OFFICE HEIGHT
OFFICE
TC2-2848
3' - 0"
7' - 0"
3' - 0"
3' - 0"
3' - 0"
RECEPTION
COFFEE
WAITING OFFICE
9' - 11"
AREA Designer: CLINT
7/22/2021 9:00:47 PM
TC2-3248 TC2-2848
5' - 3 7/8" X 4' - 0 1/4" 4' - 7 7/8" X 4' - 0 1/4" M A I N L E VE L
A3
CLINT BACHMANN
320-
320-808-
808-5972
CBDESIGNSLLC.COM
C LINT.BACHMANN@GMAIL.COM
LEGAL DISCLAIMER
These drawings have been prepared to meet
generally accepted professional standards and
practices and have been developed without
knowledge or reference to a specific site or
geographical area. Therefore, supplemental to these
documents, it is the owner and his/her builder’s
responsibility to follow the material and equipment
manufactures instructions, and to use accepted
standards for each building trade. Topographic and
subsurface conditions should be verified and
foundation plans adapted accordingly. Before
starting construction, the builder should check and
be responsible for all dimensions and other details,
and should review the plans for compliance with
governing code requirements for the geographic
area in which the house is to be built. All structural,
mechanical and electrical requirements should also
be reviewed before construction begins. Codes
govern over drawings and dimensions govern over
scale. The owner should check with the local building
department to see if a professional stamp is
required on the drawings for permit purposes. It is
suggested that a local architect be retained to
review and make any changes necessary to ensure
that the plans meet the above requirements. Any use
of this information without adaptation to changes
and codes, standards, site conditions and other
factors is at the owner’s sole risk. The designer
assumes no responsibility for changes made to
these plans by others and makes no warranties,
either expressed or implied, regarding these plans.
The owner agrees to defend and indemnify the
designer for all claims, costs, losses or damages
resulting from the use of this information.
Authorization of the use of this plan is on the
express condition that you comply with all local
C COPYRIGHT 2019
These drawings are the property of the
designer and are protected by federal
copyright law. Any unauthorized use or
reproduction of these plans is prohibited by
law.
STORAGE
+/-
3' CEILING HEIGHT 16' - 0"
VERIFY W/ EXISTING VAULT
DN
25' - 0"
CUT DOWN
CAR CARE
DOOR
UP
OPEN SPACE
19' - 8 1/2"
+/-
5' CEILING HEIGHT
VERIFY W/ EXISTING VAULT
41' - 0"
Designer: CLINT
SECOND LEVEL 7/22/2021 9:00:48 PM
3/32" = 1'-
1'-0"
S E C O N D L E V EL
A4