Professional Documents
Culture Documents
TWM TW-BH95M4PH
TWM TW-BH95M4PH
TW-BH105M4PH
CONTENTS
SAFETY INSTRUCTIONS
Safety Instructions .................................................. 2
INSTALLATION
Product Description ................................................ 9
Installation ........................................................... 10
OPERATION
Quick Start ............................................................. 14
Before Each Washing .............................................. 15
Detergent Dispenser ............................................... 16
Control Panel ......................................................... 17
Option.................................................................... 18
Other Functions ...................................................... 20
Programs................................................................. 22
Washing Program Table ............................................ 23
MAINTENANCE
Cleaning And Care ................................................. 24
Troubleshooting .................................................... 27
Technical Specifications ......................................... 28
1
SAFETY INSTRUCTIONS
Safety Instructions
• This appliance is not intended for use by
persons(includingchildren) with reduced
physical,sensory or mental capabilities or lack of
experience and knowledge,unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid hazards.
• The new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household
and similar applications such as:
− staff kitchen areas in shops, offices and other
working environments;
− farm houses;
− by clients in hotels, motels and other residential type
environments;
− bed and breakfast type environments;
− areas for communal use in blocks of apartments or in
laundromats.
• The maximum permissible inlet water pressure, 1 MPa,
for appliances is intended to be connected to the water mains.
The minimum permissible inlet water pressure is 0.05 MPa, if
this is sufficient for the proper operation of the appliance.
The maximum washing capacity is 8.5/9.5 kg.
2
SAFETY INSTRUCTIONS
Safety Instructions
For your safety,the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:
! Warning!
This combination of symbol and descriptive words
indicates a potentially dangerous situation which may
result in death or serious injuries unless it’s avoided.
Caution!
This combination of symbol and descriptive words
indicates a potentially dangerous situation which may
result in slight or minor injuries or damage to property
and the environment.
Note!
This combination of symbol and descriptive words
indicates a potentially dangerous situation which may
result in slight or minor injuries.
! Warning!
Electric shock!
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons,in order to avoid hazards.
3
SAFETY INSTRUCTIONS
• The new hose-sets supplied with the appliance must
be used and the old hose-sets must not be used.
• Before maintenance, unplug the appliance.
• Always unplug the machine and turn off the water
supply after use. The standard inlet water pressure:
0.05MPa~1MPa.
• This appliance must be grounded. In the event of
malfunction or breakdown , grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current.
• This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that
is properly installed and grounded in accordance with all
local codes and ordinances.
4
SAFETY INSTRUCTIONS
Risk to children !
• The appliance can be used by children aged 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be done by children without supervision.
• Children of less than 3years should be supervised to
ensure that they do not play with appliance.
• Animals and children can climb onto the machine. Check
the machine before every operation.
• Children should be supervised that they do not play with
the appliance.
5
SAFETY INSTRUCTIONS
• The glass door may be very hot during the operation. Keep
children and pets far away from the machine during the
operation .
• Remove all packaging materials and transport bolts before
using the appliance. Otherwise, serious damage may result.
• The plug must be accessible after installation.
Risk of explosion!
• Do not wash or dry articles that have been cleaned in, washed
in, soaked in, or spotted with combustible or explosive
substances( such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) This may result in
fire or explosion.
• Rinse the articles thoroughly by hand before putting them
in the appliance.
Caution!
6
SAFETY INSTRUCTIONS
7
SAFETY INSTRUCTIONS
• Make sure that all pockets are emptied. Sharp and rigid
items such as coins,brooches,nails,screws or stones etc.
may cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained,before opening its door.Please do not open
the door if there is any water visible.
• Be careful of being scalded when the product drains hot
washing water.
• Never refill the water by hand during washing.
• After the program is completed, please wait for two
minutes before opening the door.
8
INSTALLATION
Product Description
Top cover
Drum
Door
Drain pump filter
Drain hose
Note!
• This illustration is for reference only, please refer to the actual product as
standard.
Accessories
Transport Supply hose Drain hose Owner’s manual Anti-rat cover Spanner assembly Screw(optional)
hole plug cold water support (optional) (optional)
( optional)
9
INSTALLATION
Installation
Installation area
! Warning!
• Stability is important to prevent the product from
moving!
• Make sure that the product does not stand on w
w
the power cord.
W > 20mm
• Put the stick at the middle of the control panel, and hang the rope in front of the
machine.
• Maintain a distance of 10cm from the rope end to the control panel edge( c ). Adjust
the legs until ‘d’ is 3.5-4.5cm (‘d’ is the distance from rope to bottom of front cover).
Control Panel
d Front Cover
9
11
INSTALLATION
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
1 2 slide bushing 3 4
clamp nut
Loosen clamp nut and Press the tap end Press slide bushing, Connection finished
four bolts against the rubber ring insert inlet hose into
inside the clamp then connecting base
tighten the 4 screws.
2.Connection between screw tap and inlet hose.
slide bushing
Tap with threads and inlet hose Special tap for washing machine
9
12
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the back of the product
and fasten the pipe tightly clockwise.
water Inlet valve water supply hose
Drain Hose
! Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result due to water leakage.
Min.60cm
Water trough
Note!
• If the machine has drain hose support, please install it as shown below .
Trough
Hose Retainer
Max.100cm
Min.60cm
d
B in
Max.100cm
Min.60cm
! Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
10
13
OPERATION
Quick Start
Caution!
• Before washing, please make sure that the unit is installed properly.
• Before washing for the first time, the product should be operated without clothes,
using DRUM CLEAN as the suggested program.
1. Before Washing
1 2 3 4 5
Note!
• Detergent needs to be added in "case I" only when pre-washing option is
selected.
2. Washing
1 2 3 4
3. After Washing
The buzz will sound or “End” will be displayed.
10
14
OPERATION
Check the label Take items out of the Tie tassels into knots;fasten
pockets zippers and buttons
Put small clothes into a Turn the following clothes Segregate clothes with
laundry net inside out: those that easily varying textures or materials
form fiber balls on its surface
and those with long strands
of fiber
! Warning!
• Washing a single piece of clothing may cause severe unbalance and consequently
sound an alarm. In this case, it is suggested to add one or two more pieces of
clothing to the wash load that will also make draining smoother. Do not wash
clothes stained with kerosene,gasoline,alcohol,and other flammable materials.
10
15
OPERATION
Detergent Dispenser
I Pre wash detergent
II Main wash detergent
Softener
Caution!
• Detergent needs to be added in "case I" only when pre-washing option is
selected.
Program Program
COTTON ANTI-ALLERGY
COTTON ECO MIX
WASH 45’ WOOL
BEDLINEN COLOR CARE
SPIN ONLY QUICK 12’
DRUM CLEAN
Means required ○ Means optional
Note!
• As for powder detergents that have formed into cluster or masses, it is suggested
to dilute the detergent in some water, before pouring into the detergent box. This
will prevent the inlet of the detergent box from clogging and water from
overfowing during the filling process.
• Choose the suitable type of detergent for the various washing temperatures, to
get the best washing effect with less water and energy consumption.
10
16
OPERATION
Control Panel
SOIL LEVEL
ANTI-ALLERGY
3
4 5 12 11
Note!
• This illustration is for reference only, Please refer to the actual product as standard.
11 On/Off 12 Start/Pause
Product is switched on or off. Press the button to start or pause the
washing cycle.
3 Option 4 Programs
This allows you to select additional Available according to the laundry type.
functions and the buttons will light up
when selected.
5 Display
The display shows the settings, estimated remaining time, options, and status messages
for your washer. The display will remain on throughout the cycle.
A Prewash
A B C D E
B Wash
C Rinse
D Spin
G
E Reload
10
17
OPERATION
Option
PREWASH
The PREWASH function provides an extra wash before the main wash is executed.
It’s suitable for cleaning soiled clothes and needs detergent in case 1.
RINSE
This setting provides an extra rinse, when selected.
FAST WASH
This function decrease the washing time.
SOIL LEVEL
The default level is set at “light” and the washing time increase from “light”,” normal”
and “heavy”
DELAY END
To set the Delay function:
1. Select a program
2.Press the DELAY END button to choose the start time delay(the delay time is 0-24 hours.)
3.Press [ START/PAUSE] to commence the delay operation
DELAY
END
10
18
OPERATION
Model:TW-BH95M4PH;TW-BH105M4PH
Program Option
DELAY END PREWASH SOIL LEVEL FAST WASH RINSE
COTTON ECO ○ ○
COTTON ○ ○ ○ ○ ○
WASH 45' ○ ○ ○
BEDLINEN ○ ○ ○ ○ ○
ONLY ○
DRUM CLEAN ○
ANTI-ALLERGY ○ ○ ○
MIX ○ ○ ○ ○ ○
WOOL ○ ○ ○
COLOR CARE ○ ○
QUICK 12' ○
○ Means optional
10
19
OPERATION
Other Functions
RELOAD
With this operation, the user can add pieces of laundry into the machine, even after
washing has begun. At this point, however, the drum is rotating and there is a large
amount of hot water in it. This is an unsafe condition and the door cannot be opened
forcibly. To reload, press [START/PAUSE] for 3 seconds and follow the steps below.
1.Wait until the drum stops rotating.
2.The door will be automatically unlocked.
3.Open the door , add clothes to the drum, and close the door. Press the
[START/PAUSE] button.
Caution!
• Don't use the Reload function when the water level is over the edge of the
inner tub or when the temperature is high.Please add clothes when the drum
stops rotating.
MEMORY
Stores the frequently used program.
Select program and options and Press [TEMP.] and [SPIN] at the same time for 3
seconds to memorize the selected settings.
The default memory setting is COTTON ECO.
CHILD LOCK
To avoid mis operation by children.
SOIL
RINSE
LEVEL
10
20
OPERATION
SPIN
SPIN
Press this button to change the spin speed.
Model:TW-BH95M4PH;TW-BH105M4PH
Caution!
• When the pilot lights of spin speed (600,800,1000,1200,1400) are off,
it means the spin process will not be executed.
TEMP.
TEMP.
Press this button to regulate the water temperature(20°C,30°C,40°C,60°C,90°C)
When all the pilot lights are off, it means the water temperature is cold
(the water is not heated).
To mute the buzzer
Press the [DELAY END] and [FAST WASH] button at the same time for 3sec.,
the buzzer will be muted.To activate the buzzer function, press again the 2
buttons at the same time for 3 seconds. This setting will be retained, unless
deactivation is done again.
Caution!
• After muting the buzzer function, all the other control panel sounds will be
deactivated .
10
21
OPERATION
10
22
OPERATION
Note!
• The parameters in this table are only for user's reference. The actual parameters
may be different with those in above mentioned table.
The wool wash cycle of this machine has been approved by The Woolmark
Company for the washing of machine-washable wool products,provided that the
products are washed according to the instructions on the garment label and those
issued by the manufacturer of this washing machine.
M1661: TW-BH95M4PH
M1709: TW-BH105M4PH
10
23
MAINTENANCE
Note!
• Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products,etc.
10
24
MAINTENANCE
Cleaning The Inlet Filter
Note!
• Inlet filter must be cleaned if the pressure of water flow into the unit decreases.
1 2 3 4
Pull out the dispenser Clean the dispenser Clean the inside recesses Insert the dispenser
drawer while pressing A drawer under water with an old toothbrush drawer
Note!
• Do not use alcohol,solvents or chemical products to clean the machine.
10
25
MAINTENANCE
Cleaning The Drain Pump Filter
! Warning!
• Be careful of hot water!
• Allow the water to cool down,before opening the service filter.
• Unplug the machine to avoid electrical shock,before maintenance.
• Drain pump filter can collect lint and small foreign matter from the
wash load.
• Clean the filter periodically to ensure the normal operation of the washing
machine.
1 2 3
Emergency
drain hose
Open the lower cover cap Pull out the emergency drain After water runs out,reset
hose,and take off the hose cap. the drain hose
4 5 6
Filter cap
Open the filter cap by turning Remove lint and foreign matter Close the filter cap and the
counter clockwise lower cover cap.
Caution!
• Make sure that filter cap and emergency drain hose are reinstalled properly;filter
cap should be inserted aligning with hole plates;otherwise water may leak.
• When the appliance is in use and depending on the program selected,there can
be hot water in the pump. Never remove the pump cover during a wash cycle;always
wait until the appliance has finished the cycle and is empty. When replacing the
filter cap, ensure it is securely re-tightened.
10
26
MAINTENANCE
Troubleshooting
The appliance does not start or it stops during operation. Initially, try to find a solution
to the problem, based on the table below. If there is none, contact the service center.
.Description Reason Solution
Washing machine Restart after the door is closed.
Door is not closed properly
cannot start up Check if the clothes are stuck
Door can’t be Washer's safety Disconnect the power, restart
opened protection design is working the product
The connection between inlet Check and fasten water pipes
Water leakage
pipe or outlet hose is not tight Check outlet hose
Detergent residues Detergent is damp Clean and wipe the detergent
in the box or lumpy box
Indicator or display Electrical power cord may Make sure plug fits tightly in
does not light not be plugged in or wall outlet.Check if the power
connection may be loose. plug is connected correctly.
Check if the transport bolts have
Abnormal noise been removed
Check if it’s installed on a solid
and level floor
Note!
• After checking,activate the appliance. If the problem still occurs or the display
shows other alarm codes again,call for service.
10
27
MAINTENANCE
Technical Specifications
Power Supply 220-240V~,60Hz
MAX.Current 10A
H
Standard Water Pressure 0.05MPa~1MPa
W D
10
28
24