Professional Documents
Culture Documents
7ML55010JC71 Z
7ML55010JC71 Z
7ML55010JC71 Z
Datasheet for
Pointek CLS100 RF Capacitance point level switch, stainless steel process connection. Detects level and interface in liquids, solids,
slurries and foam. Compact, with 100 mm (4 inch) insertion, adaptable sensitivity, with the ability to tune out build-upon probe.
General
Manufacturer Siemens
Supplier Siemens
Product designation Point level measurement - Capacitance switch
Brand name Pointek CLS100
Type designation Pointek CLS100 RF Capacitance point level switch, stainless steel process
connection. Detects level and interface in liquids, solids, slurries and foam.
Compact, with 100 mm (4 inch) insertion, adaptable sensitivity, with the
ability to tune out build-upon probe.
Net weight 0.6 kg
Slogan Compact, accurate, economical - Inverse frequency shift capacitance level
switch
Input
Measurand Level
Unit of the measurand pF
Output
Current output
Signal range 0 ... 5 V
Digital output
...Relay output
Number of outputs 1
Switching capacity voltage, AC (maximum) 30 V
Switching capacity voltage, DC (maximum) 30 V
Switching capacity current, AC (maximum) 82 mA
Switching capacity current, DC (maximum) 82 mA
Accuracy
Precission accuracy 2 mm
Operating conditions
Process temperature -30 °C...+100 °C
Vibration resistance during operation (maximum) 40 m/s2
Degree of pollution Pollution degree 4
Overvoltage class Installation category I
Process medium
Dielectric constant (minimum) 1.5
Pressure
Operating pressure, relative -1 bar...10 bar
Environmental conditions
Ambient temperature during operation -30 °C...+85 °C
Degree of protection
This IP rating
is only IP68
an extract from the technical data. For more details, see the FI 01 catalog or the Industry Mall.
Creation date: 07/23/2021 Page 1 of 3
s
Datasheet for
Pointek CLS100 RF Capacitance point level switch, stainless steel process connection. Detects level and interface in liquids, solids,
slurries and foam. Compact, with 100 mm (4 inch) insertion, adaptable sensitivity, with the ability to tune out build-upon probe.
Design
Mechanical design
Design of the housing compact version, transmitter integrated
...Process connection
Design male thread
Standard ISO 228, JIS B 0202
Nominal size G 1"
...Material
....Process connection
Material stainless steel
Material number according to AISI 316L
Gasket perfluoro-elastomere (FFKM/FFPM/Kalrez)
....Housing
Material Polybutylene terephthalate (PBT)
Material brand name Valox
Material of the lid polycarbonate (PC)
....Sensor
Material of the wetted parts polyphenylensulfide (PPS)
...Mounting
Mounting position any
Electrical connections
Connection technology 2-wire technology
Number of cable entries 1
Design of the cable entry M20 x 1.5
Power supply
Electrical
Voltage type DC
Supply voltage, DC 10 V...30 V
This is only an extract from the technical data. For more details, see the FI 01 catalog or the Industry Mall.
Creation date: 07/23/2021 Page 2 of 3
s
Datasheet for
Pointek CLS100 RF Capacitance point level switch, stainless steel process connection. Detects level and interface in liquids, solids,
slurries and foam. Compact, with 100 mm (4 inch) insertion, adaptable sensitivity, with the ability to tune out build-upon probe.
Reliability (MTBF)
MTBF 163 a
Standard for MTBF SN 29500
Determination procedure calculation with component load
Reference temperature 40 °C
Applicability Measuring device
The information provided in this data sheet contains descriptions or characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of further development of the products. An obligation to provide the
respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject
to change without notice.
This is only an extract from the technical data. For more details, see the FI 01 catalog or the Industry Mall.
Creation date: 07/23/2021 Page 3 of 3