Professional Documents
Culture Documents
Ece2002 - Analog-Electronic-Circuits Complete Syllabus
Ece2002 - Analog-Electronic-Circuits Complete Syllabus
2 0 2 4 4
Prerequisite: ECE1002 - Semiconductor Devices and Circuits Syllabus Version
2.0
Course Objectives:
1. To design BJT and FET amplifiers with parasitic, coupling and bypass capacitors and understand
the effect of capacitances in its frequency response.
2. To understand the operation and design of various classes of power amplifier circuits
3. To introduce MOSFET active biasing and to design a MOSFET differential amplifier circuit
with active biasing and analyze its frequency response.
4. To discuss the effects of negative feedback on amplifier circuits and to study different types of
oscillator circuits.
Course Outcomes:
1. Design simple electronic circuits based on diodes.
2. Design a BJT and MOSFET amplifier for the specifications given and analyze transient and
frequency response.
3. Distinguish different classes of power amplifiers and employ it.
4. Classify the different current mirrors based on the biasing.
5. Illustrate MOSFET based differential amplifiers with active biasing and its frequency response.
6. Construction of feedback amplifier and oscillator circuit for the given specifications.
7. Understand the contemporary issues related to analog electronic circuits.
8. Design, simulation, modeling and hardware implementation of analog circuits with discrete
components.
Reference Books:
1. P. Malvino, D. J. Bates,Electronic Principles, 7/e, Tata McGraw-Hill, 2017.
2. R. L. Boylestadad L. Nashelsky Electronic Devices and Circuit Theory 11/e, Pearson Education,
2015.
Mode of evaluation: Internal Assessment(CAT, Quizzes, Digital Assignments) & Final Assessment
Test (FAT)
List of Challenging Experiments (Indicative)
# Simulation Tool used in Experiments : Multisim
# Hardware components used in experiments : discrete R,L,C components, BJT, MOSFET, bread
board, Signal Generator, Oscilloscope etc
# Concepts studied in all the modules should have been used
1 Introduction to hardware workbench and multisim software simulation tool. 3 hours
2 Design of the Amplifiers for the given frequency Specifications and conduct 3 hours
frequency response analysis using BJT Single Stage Amplifier
3 Design of the Amplifiers for the given frequency Specifications and conduct 3 hours
frequency response analysis using MOS Single Stage Amplifier
4 Design of Power Amplifiers for the given Specifications using BJT Class B 3 hours
Power Amplifiers.
5 Design of Power Amplifiers for the given Specifications using BJT Class AB 3 hours
Power Amplifiers.
6 Design of the Amplifiers for the given frequency Specifications and conduct 3 hours
frequency response analysis using MOS Differential Amplifiers.
7 Design of Feedback Amplifiers for the given Specifications- Shunt Series 3 hours
Feedback Amplifier.
8 Design of Feedback Amplifiers for the given Specifications- Series Shunt 3 hours
Feedback Amplifier.
9 Design of Oscillators for the given Specifications - RC Phase shift 3 hours
Oscillators.
10 Design of Oscillators for the given Specifications - Colpitt’s and Hartley 3 hours
Oscillator
Total laboratory hours 30 hours
Mode of assessment: Continuous Assessment & Final Assessment Test (FAT)
Typical Projects
• Laser Based Transmitter And Receiver
• FM Spy Audi Transmitter
• DTMF Based Automation System
• Cellphone Controlled Home Appliances Without Microcontroller
• Bluetooth Controlled Car
• DTMF Controlled Landrover
• MOSFET Audio Equalizer Circuit
• Mini UPS System
• BJT Subwoofer Power Amplifier
• Design of Low Power Emergency Light Circuit
Mode of evaluation: Review I, II and III.
Recommended by Board of Studies 13-12-2015
Approved by Academic Council No. 39 Date 17/12/2015