Professional Documents
Culture Documents
Antenna Specifications: ASI4518R4v06
Antenna Specifications: ASI4518R4v06
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/1710-2690-
65/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 4 x (1710 - 2690)
Frequency range (MHz) 880 - 960
690 - 803 790 - 862 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45°, -45°
Electrical downtilt (°) 0 - 10, continuously adjustable , each band separately
at mid Tilt 16.2 16.5 16.9
over all Tilts 16.0 ±0.5 16.3 ±0.5 16.8 ±0.6
at mid Tilt 17.3 17.4 17.6 18.1
Gain (dBi) Bottom
over all Tilts 17.2 ±0.5 17.4 ±0.5 17.5 ±0.6 18.0 ±0.6
at mid Tilt 16.9 17.2 17.4 17.5
Top
over all Tilts 16.8 ±0.5 17.1 ±0.3 17.2 ±0.5 17.5 ±0.5
Side lobe suppression for first side
> 20 > 18 > 17 > 20 > 20 > 19 > 19
lobe above main beam (dB)
Horizontal 3dB beam width (°) 66 ±2.7 65 ±2.9 63 ±4.1 66 ±4.7 63 ±3.3 61 ±5.2 60 ±4.4
Vertical 3dB beam width (°) 8.6 ±1.1 7.4 ±0.9 6.5 ±0.6 7.6 ±0.6 6.8 ±0.5 6.1 ±0.5 5.6 ±0.2
VSWR < 1.5
2LnH Band
6-16 Ports
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
≥ 30 (690 - 862 // 1710 - 2690 MHz)
Interband isolation (dB)
≥ 30 (880 - 960 // 1710 - 2690 MHz)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) > 25 > 27 > 26 > 30 > 30 > 27 > 27
Cross polar ratio (dB) 0° > 18 > 22 > 22 > 19 > 19 > 21 > 20
Max. power per input (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Total power (W) 1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Accessories
Item Model Description Weight Units per antenna
Mechanical downtilt:
Downtilt kit ASMDT0F01 3.1 kg 1 (Separate packing)
0-8°
189
ASI4518R4v06
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/1710-2690-
65/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port Antenna with 6 Integrated RCUs - 2.6m
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx…..yyLB
yLT yyyRT
HWMxxx…….yLT
HWMxxx……….r
HWMxxx…yyyRT
yyLB yyyyRB
HWMxxx..yyyyRB
r rr
HWMxxx………rr
r - Red y - Yellow
L - Left array R - Right array
T - Top array B -Bottom array
690 - 862 MHz 880 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz
(Top) (Bottom)
190