Professional Documents
Culture Documents
7 090 L03 00001 C 2, Piping Material Specification - 170531
7 090 L03 00001 C 2, Piping Material Specification - 170531
C-2 31 May, 17 For Approval DS, LEE JK, CHOI DH, SONG
C-1 17 May, 17 For Approval DS, LEE JK, CHOI DH, SONG
C 18 Mar, 17 For Approval DS, LEE JK, CHOI DH, SONG
B 04 Nov, 16 For Approval DS, LEE JK, CHOI DH, SONG
A 18 Apr, 16 For Approval HS, LEE JK, CHOI DH, SONG
REV DATE DESCRIPTION DSGN CHKD APPD
PROJECT TITLE :
OWNER :
CONTRACTOR :
TABLE OF CONTENTS
1.0 SCOPE
1.1 This specification covers the basic requirements for the design, material and installation of the
piping system in Sarulla Geothermal Power Project.
1.2 This specification shall be applied only to piping materials indicated on P&I diagrams. Piping
systems, however, which are furnished as a regular part of proprietary or standard equipment (or
package facility) will be in accordance with the equipment supplier's standard. Accordingly those
will not be included in this spec.
1.3 When the piping is connected to equipment, this specification shall be applied to the extent
indicated below;
2) Companion flanges, gaskets, bolts and nuts at the matching point between the piping
furnished as a part of equipment by its supplier and that provided by purchaser.
3) First block valve with companion flange, gaskets, bolts and nuts in the instrument
connecting line.
Note) "First block valve" in instrument connecting line as used herein shall mean the
nearest valve to a line to which the instrument is connected.
1.4 This piping material classification may not be applied to specially designed companion flanges,
gaskets, bolts and nuts at the equipment nozzles.
2.1 Design, fabrication, testing and inspection of piping materials shall be accomplished in
accordance with the following listed Codes and Standards including revision and addenda in
effect at the time of execution of the contract.
The contractor can select any code and standard, at his discretion, from the list of the standards.
BS : British Standards
CODAP : Code Francais de Construction des Appareils a pression
CSA : Canadian Standards Association
DIN : Deutsche Industries Normen
EN : Euronorms
ISO : International Organization for Standardization
JIS : Japan Industrial Standard
NFPA : National Fire Protection Association
NZS : New Zealand Standards
OSHA : Occupational Safety and Health Administration Standard
SSPC : The Society for Protective Coatings
2.2 Unless otherwise indicated, all piping design is in accordance with the requirements of ASME
B31.3 Process Piping for binary and oil system and ASME B31.1 Power Piping for other metal
piping.
2.3 All valves and pipe fittings shall be as indicated in ASTM code or approved equivalent.
3.1 Unit
Unless otherwise specified, SI units shall be applied as the measurement system for the drawings
and documents to be submitted.
3.3 Pipes
3) The thicknesses of the pipes shall be calculated following the ASME requirements;
Corrosion allowance for piping used for two phase fluid, steam and brine shall be 3.0
mm.
With exception of small bore piping with corrosion allowance may be reduced as
Feasible in the market.
*According to NFPA 13, HDEC shall be applied in dry galvanized pipe to prevent corbon steel pipe
corrosion for fire fighting system.
(NFPA13.8.4.7.2.1 : Where steel pipe is used in preaction and dry pipe systems, piping materials shall be
limited to internally galvanized steel.)
Galvanized Material (Pipe , fitting and flange) shall be used for above ground (A/G) dry pipe.
(e.g. discharge part of deluge valve for fire water spray system )
Within the Carbon Steel(AG), other than the dry galvanized pipe is the wet pipe(black carbon steel).
5) The following nominal pipe size shall not be used except where required to connect to
equipment.
3/8"
1-1/4" (except where connecting to equip. which has these size connections.)
3-1/2"
5"
6) Where relevant, formed bends and offsets shall be used and be cold formed in a
standard pipe bending machine. They shall have an inside radius of not less than five (5)
times the outside diameter of the pipe. Unless otherwise specified.
7) All buried metallic pipes shall be provide with cathodic protection except stainless steel
pipe.
3.4 Fittings
1) All pipe work shall be joined by means of an approved type of welded joints, threaded
connections may be used for special valves and the connections of the Fire water, Raw
water system.
2) All threaded connections shall have taper threads in accordance with ASME B1.20.1
Pipe Threads, General Purpose.
3) Long radius elbows shall be generally used for all piping, unless otherwise noted.
ASME B16.28 : Wrought Steel Buttwelding Short Radius Elbows and Returns.
ASTM D3350 : Standard Specification for Polyethylene Plastic Pipe and Fittings
Materials.
AWWA C606 : Standard for Grooved and Shouldered Joints.
5) All non-ferrous fittings shall be fully rated for the same internal pressure as the
matching pipe.
1) Fittings shall be cast of ductile iron conforming to ASTM A-536, forged steel conforming
to ASTM A-234, or fabricated from Std. Wt. Carbon Steel pipe conforming to ASTM A-
53, Grade B. Fittings provided with an alkyd enamel finish.
2) Couplings with gasket to fit the grooves shall be used to join grooved pipe or grooved
fitting.
3.6 Flanges
1) Flange ratings, facing, face finish and manufacture shall be as per ASME B16.5 unless
otherwise specified.
Flanges 26” & above size shall be manufactured as per ASME B16.47 Series A.
2) The bore of welding neck flanges shall correspond to the inside diameter of the
connecting pipe or fitting.
3) Unless otherwise specified, all flanges shall be of Raised Face (RF), designed according
to ASME B16.5.
4) All class ASME 150 to 600 flanges shall have raised face with serrated spiral finished
unless otherwise specified. The resultant surface finish shall have 125 AARH.
ASME B16.1 : ASME Gray Iron Classes 25, 125, and 250
ASME B16.5 : ASME Class 150 to 2500(24” and smaller)
ASME B16.47 : ASME Class 150 to 900(26” and larger)
ASTM D3350 : Standard Specification for Polyethylene Plastic Pipe and Fittings
Materials
3.7 Gaskets
1) Limitation dimensions of gaskets other than Ring Joint suitable for ASME flanges shall
be in accordance with ASME B16.5, Nonmandatory Appendices B.
2) Gasket dimensions for flanges larger than 24” shall be in accordance with the flange
standard specified in the individual specification class.
2) Unless otherwise indicated in the piping material classes, bolts and nuts shall be hot dip
galvanized as per ASTM A153 or Equivalent applicable standards Except stainless steel
bolts and nuts.
3) The bolts shall have full-length thread and the tips shall be flat finished.
4) Bolts and nuts with flat and spring washers shall be free burrs, seams, laps, loose scale,
irregular surface and any defects affecting their service ability.
5) Dimensional requirements of bolts and nuts for flange connection shall be in accordance
with ASME B16.5 Table 1C as follows ;
ASME B18.2.1 : Square and Hex Bolts and Screws (Inch Series)
ASME B18.2.2 : Square and Hex Nuts (Inch Series)
3.9 Valves
2) Valve assemblies shall be designed for the pressure and temperature ratings of the class
specified in this specification and Valve List.
3) Valve stem, packing, trim and bonnet gasket material shall be applied with the
requirement of applicable code unless otherwise specified.
4) The manually operated valves in the sizes and rating shown below shall be provided
with a gear operator.
6) Unless otherwise specified, socket weld & screw bores shall conform to ASME B16.11.
7) All valves shall be fitted with outside screw spindles unless otherwise specified or
approved.
9) The internal diameter of all valves at the end adjacent to the pipe work shall be the same
as the internal diameter of the connection pipe.
10) All valves shall be fitted with indicators to identify open or shut position of the valves.
In the case of valves being fitted with extended spindles, indicators shall be fitted to
both the extended spindles and to the valve spindles.
11) Valves shall have butt weld or flanged ends in accordance with the piping system
requirements. All valves and pipe fittings material shall be as indicated in ASTM code
or approved equivalent.
12) Valves flanges or couplings shall be as specified and match those specified for the
piping installation.
13) Valve shall be of a standard and quality which ensures satisfactory operation consistent
with geothermal industry practice.
14) Extension spindles shall be supplied wherever necessary to achieve the specified
operating requirements.
15) As a general rule, the hand wheels shall be arranged to turn in a clockwise direction to
close the valve. The direction of rotation for opening and closing shall be indicated on
the hand wheels.
16) The material of any valve or fitting installed in the pipeline shall be of the grade equal to
or better than the pipeline material.
17) Large bore gate valves, unless otherwise specified shall be of the rising spindle type.
18) All non-return valves shall be of the type that will minimize shock.
19) Weatherproof protection covers shall be provided for all spindles of manual operated
valve locate in outdoor.
1) End preparation for buttweld shall be in accordance with ASME B16.25, as applicable.
2) The plain end type shall be in accordance with ASTM A523 or applicable standards.
4.0 ABBREVIATIONS
R L.P Condensate CO 0.0 S.S 316L 2.4 130.0 3.5 145.0 150
12.0 187.2 19.0 215.0
S H.P Steam ST 3.0 C.S 300
11.3 185.3 13.0 240.0
Diluted H2SO4 C.S
T SFA 1.5 20.0 80.0 25.5 105.0 300
dosing (PTFE Lined)
W3 Waste Water (U/G) WW 0.0 HDPE 3.1 23.0 4.0 30.0 150
X2 Sewage Water (U/G) SE 0.0 HDPE 6.0 40.0 7.0 54.0 150
Steam Scrubbing Pump 31.6 80.0 40.0 105 Reflect the condition of
~ Injection Nozzle Scrubbing Pump
Discharge
H.P Bypass system ~ 1.6 137.7 3.0 185 Reflect the condition of
Spray Nozzle H.P Steam Bypass
Steam
Each piping material class indicates the maximum design pressures and temperatures for which
the piping material classes may be used. For each piping system, or portion thereof, a piping
material class shall be selected which provides material appropriate for the service conditions and
which has a maximum allowable design pressure and temperature which equals or exceeds the
design pressure and temperature of the line for which it is to be used.
Please refer to attached piping material classification sheets paged from 16 thru 76.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 12" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 300# RF, Socket Weld ASTM A105, ASME B16.5.
2 1/2" - 12" Forged Steel, 300# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
Note
1.Underground piping shall be used Coal tar epoxy coated pipe or Polyken tape.
SERVICE
Motive Fluid (MF)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 12" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF, Socket Weld ASTM A105, ASME B16.5
2 1/2" - 12" Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
Note
1.Underground piping shall be used PE coated pipe or Polyken tape.
SERVICE
Motive Fluid (MF)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
26" - 34" Pipe EFW SCH.XS ASTM A672 GR B70 CL12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
26" - 36" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 300# RF Socket Weld, ASTM A105 ASME B16.5.
2 1/2" - 24" Forged Steel, 300# WN RF, ASTM A105, Bore to Match.
Pipe ASME B16.5.
26" - 36" Forged Steel, 300# WN RF, ASTM A105, Bore to Match.
Pipe ASME B16.47 Flange series A.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv. SERVICE
Geothermal Fluid (GF)
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.. RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 36"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
24" S S S S S W W W W R R R R R R T
36" S S S S S W W W W W W W R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Lift VCS-EF1-L
1/2" - 2"
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 12" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket weld, ASTM A105, ASME B16.5
2 1/2" - 12" Forged Steel, 150# WN RF, ASTM A105, Bore to Match
Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
L.P Brine (BR)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Gate VTS-EF5
1/2" - 2"
Gate VTF-HC8
2 1/2” - 4”
Check
VCS-EF5-L
1/2" - 2" Lift
VCF-HC8-S
2 1/2" - 6" Swing
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F304, ASME B16.11.
1/2" - 2" Welded Butt Weld, ASTM A403-WP304, ASME B16.9 Thickness to match pipe.
2 1/2" - 6" Welded Butt Weld, ASTM A403-WP304, ASME B16.9 Thickness to match pipe.
Flanges
1/2" - 2" Forged Steel, 150# Socket Weld, ASTM A182-F304, ASME B16.5
2 1/2" - 6" Forged Steel, 150# WN RF, ASTM A182-F304, Bore to Match Pipe ASME B16.5
ACCESSORIES
Bolting
Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
Note
1.Underground piping shall be used Coal tar epoxy coated pipe or Polyken tape.
SERVICE
Instrument Air (IA)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 12" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2"
Forged Steel, 150# RF, Socket Weld ASTM A105, ASME B16.5
2 1/2" - 12"
Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring..
SERVICE
Wet Compressed Air
(From Discharge of Air Compressor To Inlet
of Wet Air Receiver)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F316L, ASME B16.11.
ACCESSORIES
Bolting
" Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
SERVICE
Lube Oil (LO)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Lift VCS-EF1-L
1/2" - 2"
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 4" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket weld, ASTM A105, ASME B16.5
2 1/2" - 4" Forged Steel, 150# WN RF, ASTM A105, Bore to Match
Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
Lube Oil (LO)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Note 2
1/2" - 2" Pipe SMLS SCH. 80 ASTM A53 GR B, PE.
Note 2
2 1/2" - 12" Pipe ERW SCH. 40 ASTM A53 GR B, BE.
Fittings
Note 2
1/2" - 2" Forged Steel 3000# SCRD type end ASTM A105, ASME 16.11.
Note 2
2 1/2" - 12" A234, GR WPB, Grooved Ells, Tees, Reducers and Split Ring Metallic Coupling
Joint sets (with elastomeric gasket, ASTM A-536, AWWA C606, securing bolt and
nuts etc.), ASME B16.9.
Flanges
Note 2
1/2" - 2" Forged Steel, 150# FF, SCRD, ASTM A105, ASME B16.5.
2 Note 2
2 1/2" - 12" Forged Steel Grooved Type end, 150#, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
SERVICE
Note: Fire Fighting (FW) (A/G) with Fire Gas
1. Material of securing bolt and nut shall be same material bolt & nuts.
RUN
BRANCH
SIZE SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" M M M M R T
3" M M M M M M T
4" O O M M M M R T
6" O O M M M M M M T
8" O O O O O O M R R T
10" O O O O O O M R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. M = Mechanical -T
4. O = Threadolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
N/A
Pipe
1/2" - 3" High Density Polyethylene DR 11 (PN16) HDPE ASTM PE 4710. Note 1, 3
4" - 12" High Density Polyethylene DR 11 (PN16) HDPE ASTM PE 4710. Note 1, 3
Fittings
1/2" - 2" High Density Polyethylene ASTM PE 4710, Butt Fusion Type. Note 2, 3
2 1/2" - 12" High Density Polyethylene ASTM PE 4710, Butt Fusion Type. Note 2, 3
Flanges
1/2" - 3" ASME 150# DR 11 HDPE ASTM PE 4710 with Ductile Iron Metal Ring,
Lap Joint FF.
4" - 12" ASME 150# DR 11 HDPE ASTM PE 4710 with Ductile Iron Metal Ring,
Lap Joint FF.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
Note :
1. The wall thickness based on the pressure – temperature rating for HDPE pipes.
HDPE pipe thickness shall be follow as per vendor’s standard.
2. Thickness shall be equal or greater than pipe.
3. The method of joint shall be welded as per vendor’s standard & welding procedure.
SERVICE
Fire Fighting (FW) (U/G)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" R R R R R T
4" R R R R R R T
6" R R R R R R R T
8" R R R R R R R R T
10" R R R R R R R R R T
12" R R R R R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
2 1/2" - 12" Pipe ERW SCH. 40 ASTM A53 GR B, BE. Note 2,3
Note 2,3
Fittings
1/2" - 2" Forged Steel 3000# SCRD type end ASTM A105, ASME 16.11.
Note 2,3
2 1/2" - 12" Carbon Steel ERW Buttweld Type ASTM A234 GR WPBW, ASME B16.9 Thickness to
Match Pipe
Note 2,3
Flanges
1/2" - 2" Forged Steel, 150# FF, SCRD, ASTM A105, ASME B16.5.
2 Note 2,3
2 1/2" - 12" Forged Steel 150# WN FF, ASTM A105, Bore to Match Pipe ASME B16.5.
Bolting
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
Note:
1. Material of securing bolt and nut shall be same material bolt & nuts.
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" S S R R R T
3" S S S R R R T
4" S S S R R R R T
6" S S S S S R R R T
8" S S S S S W W R R T
10" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket weld, ASTM A105, ASME B16.5
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
Nitrigen Gas (NI)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Butterfly VBF-GC2
2 1/2" - 20"
Check
VCS-EF1-L
1/2" - 2" Lift
VCF-GC2-S
2 1/2" - 18" Swing
Pipe
26" - 38" Pipe EFW SCH. XS ASTM A672 GR B70 CL12, BE.
40" - 48" Pipe EFW 15.88mm ASTM A672 GR B70 CL12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
26" - 48" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 300# RF Socket weld, ASTM A105, ASME B16.5
2 1/2" - 24" Forged Steel, 300# WN RF, ASTM A105, Bore to Match
Pipe ASME B16.5.
26" - 48" Forged Steel, 300# WN RF, ASTM A105, Bore to Match
Pipe ASME B16.47 Flange series A.
ACCESSORIES
SERVICE
Bolting H.P Brine (BC,BR)
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler, RATING
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
CONSTRUCTION CORROSION ALLOWANCE SPEC. Carbon St. Class 300# RF
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
24" S S S S S W W W W R R R R R R T
26" S S S S S W W W W W R R R R R R T
30" S S S S S W W W W W W R R R R R R T
36" S S S S S W W W W W W W R R R R R R T
48” S S S S S W W W W W W W W R R R R R R
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 10" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF, Socket Weld ASTM A105, ASME B16.5.
2 1/2" - 10" Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
SERVICE
Raw Water (RW) (A/G)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" S S S S S T
3" S S S S S R T
4" S S S S S R R T
6" S S S S S R R R T
8" S S S S S W W R R T
10" S S S S S W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
N/A
Pipe
Fittings
Note 2, 3
1/2" - 2" High Density Polyethylene ASTM PE 4710, Butt Fusion Type
Flanges
1/2" - 3" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
4" - 12" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
Note :
1. The wall thickness based on the pressure – temperature rating for HDPE pipes.
HDPE pipe thickness shall be follow as per vendor’s standard.
2. Thickness shall be equal or greater than pipe.
3. The method of joint shall be welded as per vendor’s standard & welding procedure.
SERVICE
Raw Water (RW) (U/G)
RATING
HDPE 150# FF
CONSTRUCTION CORROSION ALLOWANCE SPEC.
Design Temp. 54˚C
1/2" - 2" Socket Fusion Welding 0.0 mm I2
Design Pressure 7.0 Bar Absolute
2 1/2" - 12" Butt Fusion Welding
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" R R R R R T
4" R R R R R R T
6" R R R R R R R T
8" R R R R R R R R T
10" R R R R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 3" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 600# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 3" Forged Steel, 600# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
3 1/8 Forged Steel, 3000# (3000 psi) WN RF, ASTM A105, Bore to Match Pipe API 6A
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 600#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring..
SERVICE
M.P Brine (BC)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
26” - 30” Pipe EFW SCH. STD ASTM A672 GR B70 CL12, BE.
32" - 36" Pipe EFW SCH.XS ASTM A672 GR B70 CL12, BE.
40” - 42" Pipe EFW 11.91mm ASTM A672 GR B70 CL12, BE.
44” - 48" Pipe EFW 14.27mm ASTM A672 GR B70 CL12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9
Thickness to Match Pipe.
26" - 48" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 300# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 24" Forged Steel, 300# WN RF, ASTM A105, Bore to Match
Pipe ASME B16.5.
26" - 48" Forged Steel, 300# WN RF, ASTM A105, Bore to Match SERVICE
Pipe ASME B16.47 Flange series A. M.P Brine (BC,BR)
ACCESSORIES
RATING
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Carbon St. Class 300# RF
Gaskets
Design Temp. 220˚C
Raised Face 300#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring. Design Pressure 21.0 Bar Absolute
CONSTRUCTION CORROSION ALLOWANCE SPEC.
1/2" - 2" Socketweld 3.0 mm K
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 36" 42" 48"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
24" S S S S S W W W W R R R R R R T
26" S S S S S W W W W W R R R R R R T
28" S S S S S W W W W W R R R R R R R T
30" S S S S S W W W W W W R R R R R R R T
36" S S S S S W W W W W W W R R R R R R R T
42" S S S S S W W W W W W W W W R R R R R R T
48" S S S S S W W W W W W W W W W R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
VTS-EF1
1/2" - 2" Gate
VTF-HC2
2 1/2" - 16" Gate
VGS-EF1
1/2" - 2" Globe
VGF-HC2
2 1/2" - 4" Globe
VBW-HC2
2 1/2" - 10" Butterfly
VBL-HC2
12" - 16" Butterfly
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 16" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket Weld, ASTM A105, ANSI B16.5.
2 1/2" - 16" Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 150#, Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
SERVICE
Cooling Water (CW)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Globe VGS-EF1
1/2" - 2"
Check
Pipe
26" - 40" Pipe EFW SCH. 19.05mm ASTM A672 GR B70 CL 12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9.
Thickness to Match Pipe.
26" - 40" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 600# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 24" Forged Steel, 600# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
10” - 12” Forged Steel, 600# WN RJT, ASTM A105, Bore to Match Pipe ASME B16.5.
(Well Head Only)
26" - 40" Forged Steel, 600# WN RF, ASTM A105, Bore to Match Pipe ASME B16.47
Flange series A.
ACCESSORIES
Bolting
SERVICE
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Geothermal Fluid (GF)
Gaskets
Raised Face 600#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring. RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 36" 40"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
24" S S S S S W W W W R R R R R R T
26" S S S S S W W W W W R R R R R R T
28" S S S S S W W W W W R R R R R R R T
30" S S S S S W W W W W W R R R R R R R T
36" S S S S S W W W W W W W R R R R R R R T
40" S S S S S W W W W W W W W R R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 3" Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 900# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 3" Forged Steel, 900# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
3 1/8 Forged Steel, 3000# (3000 psi) WN RF, ASTM A105, Bore to Match Pipe API 6A
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 900#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
Geothermal Fluid (GF)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Pipe
20" Pipe SMLS SCH. 40 ASTM A53 GR B, PE. (From Production Well To MOV inlet only)
Fittings
12” - 20”. Wrought Welded Steel Butt Weld Type ASTM A234, GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
Forged Steel, 600# WN RJT, ASTM A105, Bore to Match Pipe ASME B16.5.
12” (Well Head Only)
14” - 20” Forged Steel, 600# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 600#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
Geothermal Fluid (GF)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F316L, ASME B16.11.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket Weld, ASTM A182-F316L, ASME B16.5.
2 1/2" - 12" Forged Steel, 150# WN RF, ASTM A182-F316L, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
316SS Inner & Outer Ring.
SERVICE
L.P Steam (ST)
(From Gland Steam Exhausters discharge
To O/S Ventilation)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" S S S S S T
3" S S S S S R T
4" S S S S S R R T
6" S S S S S R R R T
8" S S S S S W W R R T
10" S S S S S W W R R R T
12" S S S S S W W W R R R T
14" S S S S S W W W R R R R T
16" S S S S S W W W R R R R R T
18" S S S S S W W W W R R R R R T
20" S S S S S W W W W R R R R R R T
24" S S S S S W W W W W R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Gate VTS-EF8
1/2" - 2"
Globe VGS-EF8
1/2" - 2"
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F316L, ASME B16.11
Flanges
1/2" - 2" Forged Steel, 150# RF Socket Weld, ASTM A182-F316L, ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
SERVICE
Sampling (SP)
RATING
RUN
BRANCH SIZE
SIZE
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F316L, ASME B16.11.
Flanges
1/2" - 2" Forged Steel, 300# RF Socket Weld, ASTM A182-F316L, ASME B16.5.
2 1/2" - 12" Forged Steel, 300# WN RF, ASTM A182-F316L, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8.
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler, SERVICE
H.P Condensate (CO)
316SS Inner & Outer Ring.
Note
1.Underground piping shall be used PE coated pipe or Polyken tape. RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" S S S S S T
3" S S S S S R T
4" S S S S S R R T
6" S S S S S R R R T
8" S S S S S W W R R T
10" S S S S S W W R R R T
12" S S S S S W W W R R R T
14" S S S S S W W W R R R R T
16" S S S S S W W W R R R R R T
18" S S S S S W W W W R R R R R T
20" S S S S S W W W W R R R R R R T
24" S S S S S W W W W W R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
VTS-EF1
2 1/2" - 24" Gate
VTF-HC2
1/2" - 2" Globe
VGS-EF1
2 1/2" - 30" Butterfly
VBF-HC2
Check
26" - 48" Pipe EFW SCH.STD ASTM A672 GR B70 CL12, BE.
52" - 60" Pipe EFW 9.53mm ASTM A672 GR B70 CL12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld, ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
26" - 66" Wrought Welded Steel Butt Weld, ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 24" Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
26" - 60" Forged Steel, 150# WN RF, ASTM A105, Bore to Match Pipe ASME B16.47
Flange series A.
66” Forged Steel, 175# WN RF, ASTM A105, Bore to Match Pipe Taylor Flange.
ACCESSORIES SERVICE
Bolting L.P Steam (ST)
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
RATING
Raised Face 150#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring. Carbon St. Class 150# RF
CONSTRUCTION CORROSION ALLOWANCE SPEC.
Design Temp.185˚C
1/2" - 2" Socketweld 3.0 mm Q
Design Pressure 3.6 Bar Absolute
2 1/2" - 60" Buttweld
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 36" 40" 42" 48" 52" 56" 60"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
24" S S S S S W W W W R R R R R R T
26" S S S S S W W W W W R R R R R R T
28" S S S S S W W W W W R R R R R R R T
30" S S S S S W W W W W W R R R R R R R T
36" S S S S S W W W W W W W R R R R R R R T
40" S S S S S W W W W W W W W R R R R R R R T
42" S S S S S W W W W W W W W W R R R R R R R T
48" S S S S S W W W W W W W W W W R R R R R R R T
52" S S S S S W W W W W W W W W W W R R R R R R R T
56" S S S S S W W W W W W W W W W W W R R R R R R R T
60" S S S S S W W W W W W W W W W W W W W R R R R R R T
RUN RUN
SIZE BRANCH SIZE SIZE BRANCH SIZE
48 66 30 36 42
66 R T 72 R R R
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
5. For NPS 66” and larger, fitting will be welded type with 100% RT.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A182-F316L, ASME B16.11.
Flanges
1/2" - 2" Forged Steel, 150# RF Socket Weld, ASTM A182-F316L, ASME B16.5.
2 1/2" - 12" Forged Steel, 150# WN RF, ASTM A182-F316L, Bore to Match Pipe ASME B16.5.
ACCESSORIES
Bolting
Stud Bolt Austenitic ASTM A193, GR B8 w/nuts A194, GR 8.
Gaskets
Raised Face 150#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
SERVICE
L.P Condensate (CO)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 2 1/2" 3" 4" 6" 8" 10" 12"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
2 1/2" S S S S S T
3" S S S S S R T
4" S S S S S R R T
6" S S S S S R R R T
8" S S S S S W W R R T
10" S S S S S W W R R R T
12" S S S S S W W W R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
26" - 34" Pipe EFW SCH. STD ASTM A672 GR B70 CL12, BE.
36" - 40" Pipe EFW 10.31mm ASTM A672 GR B70 CL12, BE.
42" - 44" Pipe EFW 11.13mm ASTM A672 GR B70 CL12, BE.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11.
2 1/2" - 24" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
26" - 72" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9.
Thickness to Match Pipe.
Flanges
1/2" - 2" Forged Steel, 300# RF Socket Weld, ASTM A105, ASME B16.5.
2 1/2" - 24" Forged Steel, 300# WN RF, ASTM A105, Bore to Match Pipe ASME B16.5.
26" - 48" Forged Steel, 300# WN RF, ASTM A105, Bore to Match Pipe ASME B16.47
Flange series A.
72” Forged Steel, 350# WN RF, ASTM A105, Bore to Match Pipe Taylor Flange.
ACCESSORIES
Bolting SERVICE
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv. H.P Steam (ST)
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 304SS with Graphite Filler,
RATING
304SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 46" 60"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
16" S S S S S W W R R R R R T
18" S S S S S W W W R R R R R T
20" S S S S S W W W R R R R R R T
22" S S S S S W W W W R R R R R R T
24" S S S S S W W W W R R R R R R R T
26" S S S S S W W W W W R R R R R R R T
28" S S S S S W W W W W R R R R R R R R T
30" S S S S S W W W W W W R R R R R R R R T
34" S S S S S W W W W W W W R R R R R R R R T
36" S S S S S W W W W W W W R R R R R R R R R T
40" S S S S S W W W W W W W W R R R R R R R R R T
46" S S S S S W W W W W W W W W W R R R R R R R R T
60" S S S S S W W W W W W W W W W W W W W W W W R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
Check
Pipe
1/2" - 2" Pipe SMLS SCH. 80 ASTM A53 GR B, PE, with with FEP Coating.
2 1/2" - 14" Pipe ERW SCH. STD ASTM A53 GR B, BE, with with FEP Coating.
Fittings
1/2" - 2" Forged Steel 3000# Socket Weld, ASTM A105, ASME B16.11, with FEP Coating.
2 1/2" - 14" Wrought Welded Steel Butt Weld Type ASTM A234 GR WPB, ASME B16.9,
Flanges
1/2" - 2" Forged Steel, 300# RF Socket Weld, ASTM A105, ASME B16.5, with FEP Coating.
2 1/2" - 14" Forged Steel, 300# WN RF, ASTM A105, ASME B16.5, with FEP Coating.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
Raised Face 300#, 4.5mm THK. Spiral Wound 316SS with Graphite Filler,
316SS Inner Ring & Carbon Steel (with Galvanize) Outer Ring.
SERVICE
Diluted H2SO4 dosing (SFA)
RATING
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" S S S S S T
4" S S S S S R T
6" S S S S S R R T
8" S S S S S W R R T
10" S S S S S W R R R T
12" S S S S S W W R R R T
14" S S S S S W W R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
3. S = Sockolet / Half coupling / Threadolet.
4. W = Weldolet.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
N/A
Pipe
Fittings
Note 2, 3
1/2" - 2" High Density Polyethylene ASTM PE 4710, Socket Fusion Type.
Flanges
1/2" - 3" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
4" - 12" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
Note :
1. The wall thickness based on the pressure – temperature rating for HDPE pipes.
HDPE pipe thickness shall be follow as per vendor’s standard.
2. Thickness shall be equal or greater than pipe.
3. The method of joint shall be welded as per vendor’s standard & welding procedure.
SERVICE
Waste Water (WW) (U/G)
RATING
HDPE 150# FF
CONSTRUCTION CORROSION ALLOWANCE SPEC.
Design Temp. 30˚C
1/2" - 2" Socket Fusion Welding 0.0 mm W3
Design Pressure 4.0 Bar Absolute
2 1/2" - 12" Butt Fusion Welding
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" R R R R R T
4" R R R R R R T
6" R R R R R R R T
8" R R R R R R R R T
10" R R R R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
SIZE RANGE
DESCRIPTION REFERENCE NOTES
FROM TO
VALVES
N/A
Pipe
Fittings
Note 2, 3
1/2" - 2" High Density Polyethylene ASTM PE 4710, Butt Fusion Type.
Flanges
1/2" - 3" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
4" - 12" ASME 150# DR 11 HDPE ASTM PE 4710with Ductile Iron Metal Ring,
Lap Joint FF.
ACCESSORIES
Bolting
Stud Bolt ASTM A193, GR B7 w/nuts A194, GR 2 Hot Dip Galv.
Gaskets
150# Non-asbestos Compressed Fiber Ring per ASME B16.21 3.2mm TH’K.
Note :
1. The wall thickness based on the pressure – temperature rating for HDPE pipes.
HDPE pipe thickness shall be follow as per vendor’s standard.
2. Thickness shall be equal or greater than pipe.
3. The method of joint shall be welded as per vendor’s standard & welding procedure.
SERVICE
Sewage Water (SE) (U/G)
RATING
HDPE 150# FF
CONSTRUCTION CORROSION ALLOWANCE SPEC.
Design Temp. 54˚C
1/2" - 2" Socket Fusion Welding 0.0 mm X2
Design Pressure 7.0 Bar Absolute
2 1/2" - 12" Butt Fusion Welding
RUN
BRANCH SIZE
SIZE
1/2" 3/4" l" 1 1/2" 2" 3" 4" 6" 8" 10"
1/2" T
3/4" R T
l" R R T
1 1/2" R R R T
2" R R R R T
3" R R R R R T
4" R R R R R R T
6" R R R R R R R T
8" R R R R R R R R T
10" R R R R R R R R R T
REMARKS:
1. T = Tee.
2. R = Reducing Tee.
2) Double isolation valves shall be provided on vents and drains of system and pressure
instrument root valve having pressure rating 600# and higher.
3) The design drawings will indicate where valve sizes larger than the specified minimum
are required.
4) Hydrostatic test piping shall be provided as a minimum with 3/4” high point vents and 1”
low point drains.
2) Threaded connection may be used only where permitted by piping class sheet.
3) Calculations showing adequate reinforcement are required when half coupling whose
nominal size exceeds 1/4 the nominal size of the run for ASME B31.1 piping.
4) Pressure class of fitting (i.e. 3000#, 6000# or 9000#) in accordance with applicable
class sheet.
Main Pipe Line Class Pressure Instrument Connection Temperature Instrument Connection
Note)
1. Para. 9.1 : “Thermowell installation detail for nominal pipe wall thickness
greater than 19.05mm”
2. Para. 9.2 : “Thermowell installation detail for nominal pipe wall thickness
19.05mm & less”
3. Para. 9.3 : “Half coupling fabrication detail”
4. Para. 9.4 : “Half coupling installation detail”
5. Para. 9.5 & 9.6 : “Thermowell installation in 3” and smaller piping”
6. Para. 9.7 : “Thermowell material selection chart”
2) Weld all around and stress relieve according to the applicable codes & standards.
3) Thermowell material to the same “P” number of ASME section ix as pipe material.
1) For use on : Nominal pipe wall thickness with 19.05 maximum wall.
bore Dia=23.01mm
1) Socket type half coupling are purchased as blanks (i.e. no fitting bore “D”)
3) Pilot bore diameter (P) equals fitting bore diameter (D) minus 3.2mm
4) See installation detail para. 9.4 for drilling sequence of “P” and “D” dimensions.
TYPE-1
TYPE-2
Type-2, using socket welding fittings and construction may be used in lieu of Type-1
installation in 2” and smaller socket welded lines.
Stainless Steel