Professional Documents
Culture Documents
NTDC 2016 (NTS)
NTDC 2016 (NTS)
NTDC 2016 (NTS)
Paper composition:
General knowledge = 17 questions
Post related (technical) = 83 questions
Post Related(Technical)
Electromagnetic waves
Electromagnetic waves differ from mechanical waves in that they do not require a
medium to propagate. This means that electromagnetic waves can travel not only
through air and solid materials, but also through the vacuum of space.
Q93: form same peak value, of which signal the RMS value is smaller
Sinusoidal
Trianglar
Square
Full-wave rectified
Q94: . Filter used for extracting original signal from sampled signal isband pass
band stop
high pass
low pass
Q95: A matrix has “m” rows and “n” columns then order of matrix is?
m*n
Q96: If a and b vectors are anti-parallel, then their resultant is
a-b
Q97: Which one is closed loop system?
Autopilot
Q98: Which is not true about VHDL?
a)Strong language b)case sensitive language c) … d)
Q99: In critically damped system, damping factor of system is - Damping ratio: The ratio of the actual damping
coefficient (c) to the critical damping coefficient (cc) is known as damping factor or damping ratio. Critical Damping: ζ = 1: The displacement will be
approaching to zero in the shortest possible time. The system does not undergo a vibratory motion.
Q100: Electric dipole moment per unit volume of dielectric is called - The electric dipole moment induced per unit
volume of the dielectric material is called the electric polarization of the dielectric. ... The SI unit of measure is coulombs per square meter, and
polarization density is represented by a vector P.