Professional Documents
Culture Documents
Reactive Power Regulators 5LGA RPC and RPC 8LGA
Reactive Power Regulators 5LGA RPC and RPC 8LGA
Technical characteristics
• Microprocessor control
• Auxiliary supply voltage: 100 to 440 VAC
• -YLX\LUJ`!/a/a
• Voltage measuring input : 100 to 600V
• Current measuring input : 5A (1A programmable)
• *\YYLU[YLHKPUNYHUNL!MYVTT([V(MYVTT([V(
• Automatic current way sensing: yes
• Operation in systems with cogeneration: yes
• 7V^LYJVUZ\TW[PVU! =(
• Output relay : 5A - 250Vac
• *VZіHKQ\Z[TLU[!MYVTPUK[VJHW
• Step Switching Time: 1s ÷ 1000s
• Alarm relay: yes
• +LNYLLVMWYV[LJ[PVU!07VUMYVU[HUK07H[[LYTPUHSZ
• Operating temperature: -20 ° C to + 60 ° C
• :[VYHNL[LTWLYH[\YL!*[V*
• Optical port Front: for communication USB or WIFI with dedicated accessories
• Compliance with the standards: IEC EN 61010-1; IEC / EN 61000-6-2; IEC / EN 61000-6-4; UL508; CSA C22-2 n ° 14
3*+KPZWSH`^P[OPJVUZHUK[L_[
Reactive power regulator RPC 8BGA
The RPC 8BGA reactive power regulator equips MULTImatic Measurement functions and help to
H\[VTH[PJWV^LYMHJ[VYJVYYLJ[PVUZ`Z[LTZ
It is a very innovative controller, with exclusive features: maintain
• /PNOLSLJ[YPJHSWLYMVYTHUJL 8BGA is a real evolved multimeter, thanks also to the
• Extended Capabilities graphic display of excellent readability and to the powerful
• Graphic display TPJYVWYVJLZZVY ;OL TLHZ\YLK WHYHTL[LYZ HYL [OL IHZPJ
• Advanced communication ones (cos phi, FP, V, I, P, Q, A, Ea, Er) with the addition of the
• Upgradability, even after installation KPZ[VY[PVUVM[OL]VS[HNLHUKJ\YYLU[;/+OPZ[VNYHTVM[OL
• Powerful supervision software ]HS\LVMLHJOOHYTVUPJ^H]LMVYTNYHWOPJ]PZ\HSPaH[PVU
More details below, referring to the following page tables If 8BGA is connected to three CT, the harmonic analysis is
HUKTHU\HSZMVYM\Y[OLYPUMVYTH[PVU detailed for each phase, in order to identify any anomalies
VMZPUNSLWOHZLSVHKZ).(TLHZ\YLHUKJV\U[]HS\LZ[OH[
High electrical performance: The 8BGA controller can help in ruling the PFC (temperature, number of switching
is equipped with powerful hardware, which allows a VMLHJOZ[LW).(HSZVZ\NNLZ[Z[OLTHPU[LUHUJL[VIL
considerable electrical performances: it can be connected JHYYPLKV\[I`TLHUZVMZPTWSLTLZZHNLZVU[OLKPZWSH`
to the CT secondary 5A or 1A, it can work on networks 2LLWLMMPJPLU[JHWHJP[VYILJVTLZT\JOLHZPLY
with voltages from 100 to 600Vac with a measuring range 8BGA stores the maximum values of current, voltage,
from 75VAC to 760VAC, it can be connected to a single temperature, each associated with the date and time of the
CT (typical configuration of the power factor correction) or L]LU[MVYHIL[[LYHUHS`ZPZVM^OH[OHWWLULK
three-CTs (for a more accurate measurement of the power
factor, and this fact makes the 8BGA controller to refocus
HUK[VILHT\S[PTL[LYHZ^LSS Alarms
The set of alarms (maximum and minimum voltage, maximum
Extended Capabilities: The 8BGA reactive power and minimum current, over and under-compensation,
regulator is controlled by a powerful microprocessor that overload of the capacitors, maximum temperature,
allows a set of new functions to solve problems even in microinterruption) associated with the readability of the
JVTWSL_WSHU[ messages on the display allows a better understanding of
8BGA can work master-slave functions, handles up to 10 ^OH[OHWWLULK
languages simultaneously, can be used in MV systems Even alarm programming (enable / disable, delay, relapse
managing the transformation ratio of the VT, it can support L[JPZLHZPLYHUKMHZ[LY
multiple inputs and outputs via optional modules, it can
OHUKSL[HYNL[JVZWOPMYVTPUK\J[P]L[VJHWHJP[P]L
8BGA can build a network of 4 wired units (one master
[OYLLZSH]LZ[VILHISL[VOHUKSL\W[VZ[LWZVMWV^LY
MHJ[VYJVYYLJ[PVUPUHJVUZPZ[LU[HUK\UPMVYT^H`
8BGA Power Factor Correction Controller:
Technical parameters
Technical characteristics
• Auxiliary supply voltage: 100÷440Vac
• -YLX\LUJ`!/a/a
• Voltage Measuring range: 100÷600Vac (-15% / +10%)
• Current Measuring range: 5A (1A selectable)
• Current incoming range: from 25mA to 6A (from 10mA to 1,2A)
• Automatic phase sequence reading: yes
• Compensation in cogeneration: yes
• Burden: 9,5 VA
• Output relay current: 5A – 250Vac
• Cos ˋYange: from 0,5 ind to 0,5 cap
• Step switching time: 1s÷1000s
• Alarm relay: yes
• +LNYLLVMWYV[LJ[PVU!07
• Working temperature range: from -20°C to 60°C
• :[VYHNL[LTWLYH[\YLYHUNL!MYVT*[V*
• USB optic communication port (with COMUSB)
• ;LTWLYH[\YL*VU[YVS!MYVT*[V*
• Standards compliance: IEC EN 61010-1; IEC/EN 61000-6-2;
0,*,5"<3"*:(*U
• Step output relays: 5 (expandible till 7)
• +PTLUZPVUZ! _ TT
• >LPNO[!2N
• Part number: A25060046411000
3,+^H[JOKVNHUKHSHYT
RPC 8BGA Power Factor Correction Controller: additional modules
;OL97*).(JVU[YVSSLYHJJVTTVKH[LZ\W[VHKKP[PVUHSTVK\SLZ WS\N
WSH`
6UJL`V\OH]LHKKLKHUHKKP[PVUHSTVK\SL[OLJVU[YVSSLYYLJVNUPaLZHUKHJ[P]H[LZ[OLTLU\MVYP[ZWYVNYHTTPUN
(KKP[PVUHSTVK\SLZJHUHSZVILPUZ[HSSLKPU[OLYLHY
Communication functions
97*).(YLN\SH[VYPZ]LY`WV^LYM\SPU[LYTZVMJVTT\UPJH[PVU
The modules dedicated to these functions allow multiple solutions to remotely control the power factor system and all other variables
TLHZ\YLKJHSJ\SH[LKVYVI[HPULKMYVT[OLPUZ[Y\TLU[
• *64PZVSH[LK9:PU[LYMHJL
• COM485 RS485 opto-isolated
• >,),;/,[OLYUL[PU[LYMHJL^P[O^LIZLY]LYM\UJ[PVU
• *64796PZVSH[LK7YVÄI\Z+7PU[LYMHJL
• COMGSM GPRS / GSM modem
• CX01 cable connection from the RPC 8BGA
optical port to the USB port of the computer for
programming, downloading / uploading data,
KPHNUVZ[PJZL[J
• CX02 device to connect the optical port in the PRC
8BGA via WIFI: for programming, downloading /
\WSVHKPUNKH[HKPHNUVZ[PJZL[J
• *?HU[LUUHX\HKIHUK.:4
App 1
(WWH]HPSHISLMVY>0-0PU[LYMHJPUN^P[O[OL97*).(JVU[YVSSLY]PH[HISL[VYZTHY[WOVUL-VYP6:HUK(UKYVPK
You have the following functions:
• Set of up regulator
• Sending commands
• Reading information
• +V^USVHKPUMVYTH[PVUHUKKH[HYLZPKPUNVUIVHYK
1. For availability contact us