Professional Documents
Culture Documents
PWD SR 2018 19
PWD SR 2018 19
KSRB 0.5-7.2 : Providing white cement mortar with marble dust of mix 1:3 (1
white cement : 3 marble dust) including cost of all materials, labour charges,
1.27 HOM of machinery complete as per specifications. Specification No. KBS cum
KSRB 0.5-7.3 : Providing white cement mortar with marble dust of mix 1:4 (1
white cement : 4 marble dust) including cost of all materials, labour charges,
1.28 HOM of machinery complete as per specifications. Specification No. KBS cum
KSRB 0.5-7.4 : Providing white cement mortar with marble dust of mix 1:5 (1
white cement : 5 marble dust) including cost of all materials, labour charges,
1.29 HOM of machinery complete as per specifications. Specification No. KBS cum
KSRB 0.5-8.1 : Providing fly ash sand mortar of mix 1:1.5:3 (1 cement : 1.5
1.30 fly ash : 3 sand) including cost of all materials, labour charges, HOM of cum
machinery complete as per specifications. Specification No. KBS 0.5-2.4
KSRB 0.5-8.2 : Providing fly ash sand mortar of mix 1:2:4 (1 cement : 2 fly
1.31 ash : 4 sand) including cost of all materials, labour charges, HOM of cum
machinery complete as per specifications. Specification No. KBS 0.5-2.4
KSRB 0.5-8.3 : Providing fly ash sand mortar of mix 1:2.5:5 (1 cement : 2.5
1.32 fly ash : 5 sand) including cost of all materials, labour charges, HOM of cum
machinery complete as per specifications. Specification No. KBS 0.5-2.4
KSRB 0.5-8.4 : Providing fly ash sand mortar of mix 1:3:6.5 (1 cement : 3 fly
1.33 ash : 6.5 sand) including cost of all materials, labour charges, HOM of cum
machinery complete as per specifications. Specification No. KBS 0.5-2.4
1.34 Mud Mortar cum
Earthwork for
Buildings
Buildings
Item Code Item Description Unit
KSRB 2-1.2 : Earthwork in surface excavation in Hard soil for levelling and
lowering the ground manually ( other than foundation of buildings, culverts,
road drains and trenches of pipe lines and cables ) and removing the excavated
stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface
levelled and neatly dressed, disposed earth to be levelled after breaking of
2.2 clods and neatly dressed as per specifications. specification. No. KBS 2.1(a) / cum
2.3.1 Note :Adopt item 2.24 for excavation in all types of soils for lowering &
levelling the ground for building works by mechanical means
KSRB 2-2.5 : Excavation 1.5m and above in width in hard rock by blasting
for foundation of buildings, water supply, sanitary lines and electrical conduits
either in pits or in trenches not exceeding 1.5 m. in depth, stacking the
2.7 excavated stuff from edges of excavation with lead upto 50m including cost of cum
explosives, labour and HOM of equipment complete as per specifications.
specification. No. KBS 2.1.d / 2.3.4 / 2.18 / 2.19
KSRB 2.2.6 : Excavation 1.5m and above in width in hard rock by chiselling
and / or wedging, where blasting is prohibited for foundation of buildings,
water supply, sanitary lines and electrical conduits either in pits or in trenches
2.8 1.5 m. in depth stacking the excavated stuff clear from the edge of excavation cum
with lead upto 50m including cost of labour complete as per specifications.
Specification. No. KBS
KSRB 2.2.7: Benching hard rock 5 to 7.5 cm depth. for seating of foundation,
2.9 including cost of all labour complete as per specifications. specification. No. Sqm
KBS 2.1(a) / 2.3.1
KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of
foundations upto plinth in layers not exceeding 20 cms. in depth, compacting
2.10 each deposited layer by ramming after watering with lead upto 50 m. and lift cum
upto 1.5 m. including cost of all labour complete as per specifications.
specification. No. KBS 2.9
KSRB 2-4 : Refilling available earth around pipe lines, cables in layers not
exceeding 20cms in depth, compacting each deposited layer by ramming after
2.11 watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour cum
complete as per specifications.
KSRB 2.5 : Earthwork excavation in all soil deposits and filling sides of
foundation upto plinth in layers not exceeding 20cms. in depth, compacting
2.12 each deposited layer by ramming after watering with all lead and lift including cum
cost of all labour complete as per specifications. specification. No. KBS
2.9.9 / 2.9.10.1 / 2.1.1
KSRB 2.6 : Providing and filling sand in foundation upto plinth to required
2.13 depth for sub soil treatment including watering ramming with all lead and lift cum
complete as per specifications.specification. No. KBS 2.10.2
KSRB 2.7 : Providing and removing shoring and strutting for protecting the
sides of foundation trenches, wherever required, including cost of all materials
2.14 and labour complete as per specifications. specification. No. KBS 2.5 / 2.13 Sqm
KSRB 2.8 : Providing and Filling in foundation with granite / trap broken
metal 100mm. and down size, with approved sand including hand packing,
2.15 ramming, watering, including cost of all materials and labour with all lead and cum
lift. complete as per specifications. specification. No. KBS
KSRB 2.9 : Spreading and forming the excavated earth to required level, slope
for an average thickness of 75mm. in all classes of soils including breaking
2.16 clods and tamping manually alround the building and low laying areas Sqm
complete as per specifications.specification. No. KBS :
KSRB 2.10 : Providing sand cement bed with 5% cement with all leads for all
materials and lift of 1.5 m. machine mixed, laid in layers of 15cms. thick and
2.17 well compacted for foundation, including curing cost of materials labour and cum
HOM complete as per specifications. specification. No. KBS 2.10.2
KSRB 2.11 : Providing sand cement bed with 10% cement with all leads for
all materials and lift of 1.5 m. machine mixed, laid in layers of 15cms. thick
2.18 and well compacted for foundation, including curing cost of materials labour cum
and HOM complete as per specifications. specification. No. KBS 2.10.2
KSRB 2.12 : Providing sand piles with all leads and lift of 1.5 m. for
stabilising foundation after duly making 5 cms. dia holes to a depth of 1.2 to
2.19 1.5 m. at 0.5 m c to c and filling with sand and tamping wherever required Sqm
including cost of materials, labour complete as per specifications.
KSRB 2.13 : Providing sand piles with all leads and lift of 1.5 m. for
stabilising foundation after duly making 5 cms. dia holes to a depth of 1.2 to
2.20 1.5 m. at 0.5 m c to c and filling with sand and tamping wherever required Sqm
including cost of materials, labour complete as per specifications. with sand
and 10% cement
KSRB 2.14-1: Extra for additional lift of 1.5m. or part thereof for excavation
2.21 In loose / soft or hard soil including cost of materials, labour complete as per cum
specifications.
KSRB 2.14-2: Extra for additional lift of 1.5m. or part thereof for excavation
2.22 In soft or hard rock including cost of materials, labour complete as per cum
specifications. in soft or hard rock
Earth work excavation for foundation of structures by mechanical means as
per drawing and technical specification, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
2.23.1 of sides and bottom, backfilling the excavation earth to the extent required and cum
utilising / transporting the remaining earth locally upto 1.00km lead. (Depth
upto 3.00 Mts) -In all types of soil
Earth work for lowering and levelling the ground other than foundation works
by mechanical means upto 3.00 depth, including providing shoring and
strutting, removal of stumps and other deleterious matter, dressing of sides
and bottom, filling back the excavation earth to the extent required including
2.24 the cost of labour & HOM of machineries, as per drawing and technical cum
specification. Note: Adopt item 2.24 for excavation in all typpppes of soils for
lowering & Levelling the ground for building works by mechanical means
Anti Termite
Treatment
Treatment
Cement Concrete
Item Code Item Description Unit
KSRB 4-1.1: Providing and laying in position plain cement concrete of mix
1:2:4 with OPC cement @ 240kgs, with 40mm and down size graded granite
metal coarse aggregates @0.878cum and fine aggregates @ 0.459cum
machine mixed, concrete laid in layers not exceeding 15 cms. thick, well
4.1 cum
compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.2 : Providing and laying in position plain cement concrete of mix
1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite
metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum
machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms.
4.2 cum
thick, well compacted, in foundation including cost of all materials, labour,
HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1, 4.2
KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix
1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite
metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine
mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick,
4.3 cum
well compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.4 : Providing and laying in position plain cement concrete of mix
1:5:10 with OPC cement @ 160kgs, with 40mm and down size graded granite
metal coarse aggregates @0.86cum and fine aggregtes @ 0.58cum machine
mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick,
4.4 cum
well compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.5 : Providing and laying in position plain cement concrete of mix
M20 with OPC cement @ 300kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine
4.5 mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in cum
foundation, plinth and cills, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix
1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal
coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine
mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in
4.6 cum
foundation, plinth and cills, ncluding cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.7 : Providing and laying in position plain cement concrete of mix
1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregtes @ 0.56cum, machine
mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in
4.7 cum
foundation, plinth and cills, ncluding cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
KSRB 4-1.8 : Extra for laying cement concrete under water including cost of
4.8 pumping or dewatering and clearing slush as per specifications. Specification cum
No. KBS 4.2, 4.8
KSRB 4-1.9 : Extra for laying cement concrete under foul conditions.
4.9 cum
Specification No. KBS
KSRB 4.2.1 : Providing and laying in position reinforced cement concrete of
Design mix M25 with OPC cement @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.70 cum and fine aggregtes @
0.47cum, with super plasticisers @ 3 liters confirming to is 9103-1999
reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation for footings, pedastals,
4.10 retaining walls, return walls, walls (any thickness) including attached pilasters, cum
columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths
etc., including cost of all materials, labour, HOM of machinery, curing,
complete but excluding cost of reinforcement as per specifications.
Specification No. KBS 4.1, 4.6
KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja
4.21 with plastering ( labour charges only ) as per specifications. Specification No. M
KBS
KSRB 4-3.1 : Extra if vibrator is used for Item No.4-1 to 4-8 as per
4.22 cum
specifications. Specification No. KBS 4.2.6
KSRB 4-3.2 : Deduct where machine mixing is not done Specification No.
4.23 cum
KBS 4.2.2.5 / 4.3.2.2
KSRB 4-4.1 : Extra for use of water proofing compound in Cement concrete
4.24 of mix 1:1:2,at one kg of compound per bag of cement. Specification No. KBS cum
KSRB 4-4.2 : Extra for use of water proofing compound in Cement concrete
4.25 of mix 1:1.5:3,at one kg of compound per bag of cement. Specification No. cum
KBS
KSRB 4-4.3 : Extra for use of water proofing compound in Cement concrete
4.26 of mix 1:2:4,at one kg of compound per bag of cement. Specification No. KBS cum
KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with
6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically
4.27 fixing chicken mesh for drop chajja, facia, backing to cup boards including Sqm
cost of all materials, labour, providing and removing form work HOM of
machineries, curing, complete as per specifications. Specification No. KBS
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-
15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground), the distance between two rows being
1.25m and spacing of posts being 2m in both rows with 2 horizontal posts
4.43.1 with 0.5 mm overlap on either side and braces at 2 m c to c including M
longitudinal and transveres middle braces to step up and providing platform
with casurina poles, forms tied up using coir rope complete as per
specifications.
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-
15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground), the distance between two rows being
1.25m and spacing of posts being 2m in both rows with 2 horizontal posts
4.43.2 with 0.5 mm overlap on either side and braces at 2 m c to c including cum
longitudinal and transveres middle braces to step up and providing platform
with casurina poles, forms tied up using coir rope complete as per
specifications. - Scaffolding for stone masonry work converted to cum.
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-
15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground), the distance between two rows being
1.25m and spacing of posts being 2m in both rows with 2 horizontal posts
4.43.3 with 0.5 mm overlap on either side and braces at 2 m c to c including Sqm
longitudinal and transveres middle braces to step up and providing platform
with casurina poles, forms tied up using coir rope complete as per
specifications. - Scaffolding for stone masonry work converted to sqm.
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using
10-15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
4.44.1 and transveres middle braces to step up and providing platform with casurina cum
poles, forms tied up using coir rope complete as per specifications - for non
modular brick work (Non modular standard bricks : 4x0.23x3=2.76 cum)
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using
10-15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
4.44.2 and transveres middle braces to step up and providing platform with casurina cum
poles, forms tied up using coir rope complete as per specifications - for
modular brick work (modular standard bricks : 4x0.20x3=2.40 cum)
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using
10-15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
4.44.3 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal Sqm
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for non
modular brick work
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using
10-15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
4.44.4 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal Sqm
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for
modular brick work
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
4.46.2 Tonne
and wastage shall not be measured and paid) cost of materials, labour, HOM
of machinery complete as per specifications. Specification No. KBS 4.6.3 -
TMT bars Fe 500
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
4.46.3 Tonne
and wastage shall not be measured and paid) cost of materials, labour, HOM
of machinery complete as per specifications. Specification No. KBS 4.6.3 -
TMT bars Fe 550
Lift charges for steel of all diameters for additional floors over ground floor
4.47 per floor height of 3.5 m. or part thereof cost of labour, complete as per Tonne
specifications.
Providing and laying cement concrete using 20 mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete (RMC) M 20
for R.C.C works laid in 15 cms thick layers and well compacted vibrating,
4.48 curing, for raft foundation column footing , main and secondary beams with cum
all lead and lifts etc., complete (exclusive of cost of steel and fabrication
charges.)
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.1 charges) - Ready mixed Cement concrete for Beams, Staircase and Roof with cum
M-20 Note: The RMC should be obtained only from the plants certified by the
quality council of india as per letter no CE, C&B, AE-2, 2015-16 Dt.
02.09.2015
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.2 charges) - Ready mixed Cement concrete for Beams, Staircase and Roof with cum
M-25 Note: The RMC should be obtained only from the plants certified by the
quality council of india as per letter no CE, C&B, AE-2, 2015-16 Dt.
02.09.2015
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.3 charges) - Ready mixed Cement concrete for Beams, Staircase and Roof with cum
M-30 Note: The RMC should be obtained only from the plants certified by the
quality council of india as per letter no CE, C&B, AE-2, 2015-16 Dt.
02.09.2015
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.4 charges) - Ready mixed Cement concrete for Beams, Staircase and Roof with cum
M-35 Note: The RMC should be obtained only from the plants certified by the
quality council of india as per letter no CE, C&B, AE-2, 2015-16 Dt.
02.09.2015
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.5 charges) - Ready mixed Cement concrete for Beams, Staircase and Roof with cum
M-40. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.6 charges) - Ready mixed Cement concrete with OPC 50%+ GGBS 50% M-20. cum
Note: The RMC should be obtained only from the plants certified by the
quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.7 charges) - Ready mixed Cement concrete with OPC 50%+ GGBS 50% M-25. cum
Note: The RMC should be obtained only from the plants certified by the
quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.8 charges) - Ready mixed Cement concrete with OPC 50%+ GGBS 50% M-30. cum
Note: The RMC should be obtained only from the plants certified by the
quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.9 charges) - Ready mixed Cement concrete with OPC 80% + GGBS 20% M-35. cum
Note: The RMC should be obtained only from the plants certified by the
quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC works
laid in 15 cm thick layers and well compacted including vibrating curing etc.,
with all lead and lift etc., complete. (exculsive of cost of steel and fabrication
4.49.10 charges) -Ready mixed Cement concrete with OPC 85% + GGBS 15% M-40. cum
Note: The RMC should be obtained only from the plants certified by the
quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
Providing and casting reinforced cement concrete racks with design mix M20,
granite or trap jelly 12mm and down size 5 cms thick and below with
reinforcements of 6mm dia MS bars at 15 cms. Centre to centre for main
reinforcement and at 30cms centre to centre for distribution including supports
4.53 Sqm
wherever necessary with burnt brick in CM 1:4 including centring, form work,
curing etc., complete (inclusive of cost of steel and fabrication charges).
Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20
using clean granite or trap jelly of 20mm and down size with necessary
4.54 reinforcements at 20cms centre to centre as per design including form work, Sqm
centring, curing, etc., complete (exclusive of cost of steel and fabrication
charges).
Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and
down size jelly cement concrete design mix M20 including CM 1:3 plaster
4.55 finishing, curing etc., complete (excluding the cost of steel and fabrication Sqm
charges
Providing RCC design mix M20 using granite metal 20mm and down size for
7.5 cms thick solid parapet or perforated as per design, specification and
4.56.1 directions.(exclusive of cost of steel and fabrication charges) including Sqm
necessary centring, form work and finishing smooth with CM (1:3) etc.,
complete. - 7.5 cms thick
Providing RCC design mix M20 using granite metal 20mm and down size for
7.5 cms thick solid parapet or perforated as per design, specification and
4.56.2 directions.(exclusive of cost of steel and fabrication charges) including Sqm
necessary centring, form work and finishing smooth with CM (1:3) etc.,
complete. - 10cms thick
Providing and mixing Alkali resistant glass fibres HD12 to arrest plastic
shrinkage cracks and to provide as a secondary reinforcement in concrete at
600 gms/cum of concrete and containing minimum 127 millions of fibres of
length 12 mm , diameter 14 microns specific gravity 2.68, modulus of
4.57 cum
elasticity 72 Gpa and having the aspect ratio (length / dia) of 857, including
cost of labour, materials and HOM of machineries etc complete (Note: Rate of
cum of concrete)
Providing and laying pervious concrete of mix M20 with OPC 320 kgs with
20mm size metal coarse aggregate at 0.69 cum and 12mm size aggregates at
0.43 cum with chemical admixture at 1.44 kg/cum machine mixed, laid in
4.58 layer not exceeding 15 em thick well compacted for foot path, drain bed, all cum
round building premises, parking area etc., including cost of all materials,
labour, HOM curing complete as per specifications.
Stone Work
Item Code Item Description Unit
KSRB 5-1.1 : Providing and constructing granite / trap / basalt rubble stone
masonry in foundation with mud mortar (uncoursed), bond stones at two m.
5.1 apart in each course including cost of materials, labour, curing complete as per cum
specifications. KBS 5.1.12
KSRB 5.1-2 : Providing and constructing granite / trap / basalt rubble stone
masonry in foundation with cement mortar 1:8 (uncoursed), bond stones at
5.2 two m. apart in each course including cost of materials, labour, curing cum
complete as per specifications.KBS 5.1.12
KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubble stone
masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at
5.3 two m. apart in each course including cost of materials, labour, curing cum
complete as per specifications.KBS 5.1.12
KSRB 5.2-1 : Providing and constructing granite / trap / basalt size stone
masonry in foundation with mud mortar, stone hammerd dressed in courses
5.4 not less than 20 cms high, bond stones at two m. apart in each course cum
including cost of materials, labour, curing complete as per specifications. KBS
5.1.12
KSRB 5.2-2 : Providing and constructing granite / trap / basalt size stone
masonry in foundation with cement mortar 1:8, stone hammerd dressed in
5.5 courses not less than 20 cms high, bond stones at two m. apart in each course cum
including cost of materials, labour, curing complete as per specifications. KBS
5.1.13
KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone
masonry in foundation with cement mortar 1:6, stone hammerd dressed in
5.6 courses not less than 20 cms high, bond stones at two m. apart in each course cum
including cost of materials, labour, curing complete as per specifications. KBS
5.1.13
KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone
masonry in basement with cement mortar 1:6, edges of stones chistle dressed
5.9 in courses not less than 15 cms high, bond stones at two m. apart in each cum
course including cost of materials, labour, curing complete as per
specifications. KBS 5.1.13
KSRB 5.4-3 : Providing and constructing granite / trap / basalt size stone
masonry in superstructure with cement mortar 1:6 , edges of stones chistle
5.12 dressed in courses not less than 15 cms high, bond stones at two m. apart in cum
each course including cost of materials, labour, scaffolding, curing complete
as per specifications. KBS 5.1.13
KSRB 5.4-4 : Providing and constructing granite / trap / basalt size stone
masonry in superstructure with cement mortar 1:4 , edges of stones chistle
5.13 dressed in courses not less than 15 cms high, bond stones at two m. apart in cum
each course including cost of materials, labour, scaffolding, curing complete
as per specifications. KBS 5.1.13
KSRB 5-5 : Extra lift charges for size stone masonry above ground floor for
5.14 cum
every additional floor. KBS 5.1.13
KSRB 5-6 : Extra for constructing stone masonry in square or rectangular
5.15 cum
pillars complete as per specifications. KBS 5.1.13
KSRB 5-7 : Extra for constructing masonry in circular pillars including cost of
5.16 cum
extra materials and labour complete as per specifications. KBS 5.1.13
KSRB 5-8.1 : Providing one line dressing to granite stone slab / granite stone
5.17 Sqm
masonry as per specifications .KBS 5.1.13
KSRB 5-8.2 : Providing two line dressing to granite stone slab / granite stone
5.18 Sqm
masonry as per specifications. KBS 5.1.13
KSRB 5-8.3 : Proiding three line dressing to granite stone slab / granite stone
5.19 Sqm
masonry as per specifications. KBS 5.1.13
KSRB 5-8.4 : Providing pulmane finish only on three line dressed surface as
5.20 Sqm
per specifications. KBS 5.1.13
KSRB 5-8.5 : Providing quoin dressing to stone masonry and stone slabs, two
5.21 line 5 cms wide on each face as per specifications.(measurement including M
mortar joints). KBS 5.1.13
KSRB 5-9 : Providing chamfering edges to stone slab 2.5 cms. wide as per
5.22 M
specifications. (only chamfered length shall be recorded) KBS 5.1.13
KSRB 5-10 : Providing hammer dressing to size stones as per specifications.
5.23 No
KBS 5.1.13.3
KSRB 5-11: Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum face shell
thickness of 30mm and web thickness of 25mm with block density between
1100kglm3 and 1500kglm3 having a minimum average compressive strength
of 5.00 Nlmm2 confirming to IS 2185 (Part 1) : 2005 and constructed with
5.24.1 CM 1:4, as per IS 2572:2005 including cost of all materials, labour charges, Sqm
scaffolding, curing, hire charges of machineries etc., complete as per
specifications.KBS No.5.4 with cement concrete cavity blocks (Hollow
blocks) of size 400x200x200 mm
KSRB 5-11: Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum face shell
thickness of 30mm and web thickness of 25mm with block density between
1100kglm3 and 1500kglm3 having a minimum average compressive strength
of 5.00 Nlmm2 confirming to IS 2185 (Part 1) : 2005 and constructed with
5.24.2 CM 1:4, as per IS 2572:2005 including cost of all materials, labour charges, Sqm
scaffolding, curing, hire charges of machineries etc., complete as per
specifications.KBS No.5.4 with cement concrete cavity blocks (Hollow
blocks) of size 400x150x200 mm
KSRB 5-12: Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum face shell
thickness of 30mm and web thickness of 25mm with block density between
1100kglm3 and 1500kglm3 having a minimum average compressive strength
not less than 3.5 Nlmm2 confirming to IS 2185 (Part 1):2005 and constructed
5.25.1 with CM 1:4, as per IS 2572:2005 including cost of all materials, labour Sqm
charges, scaffolding, curing, hire charges of machineries etc., complete as per
specifications. KBS No.5.4 with cement concrete cavity blocks (Hollow
blocks) of size 400x200x200mm
KSRB 5-12: Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum face shell
thickness of 30mm and web thickness of 25mm with block density between
1100kglm3 and 1500kglm3 having a minimum average compressive strength
not less than 3.5 Nlmm2 confirming to IS 2185 (Part 1):2005 and constructed
5.25.2 with CM 1:4, as per IS 2572:2005 including cost of all materials, labour Sqm
charges, scaffolding, curing, hire charges of machineries etc., complete as per
specifications. KBS No.5.4 with cement concrete cavity blocks (Hollow
blocks) of size 400x150x200mm
KSRB 5-14: Providing and constructing load bearing wall with solid concrete
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part
1)2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
5.26.1 Sqm
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x200x200mm
KSRB 5-14: Providing and constructing load bearing wall with solid concrete
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part
1)2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
5.26.2 Sqm
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x150x200mm
KSRB 5-14.1 : Providing and constructing load bearing wall with solid
concrete blocks having block density not less than 1800kg/m3 having a
minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185
(Part 1) 2005 and constructed with CM 1 A, as per IS 25722005 including cost
5.27.1 Sqm
of all materials labour charges, scaffolding, curing, hire charges of
machineries etc., complete as per specifications. KBS No.5.4 with solid
concrete blocks of size 400x200x200mm
KSRB 5-14.1 : Providing and constructing load bearing wall with solid
concrete blocks having block density not less than 1800kg/m3 having a
minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185
(Part 1) 2005 and constructed with CM 1 A, as per IS 25722005 including cost
5.27.2 Sqm
of all materials labour charges, scaffolding, curing, hire charges of
machineries etc., complete as per specifications. KBS No.5.4 with solid
concrete blocks of size 400x150x200mm
KSRB 5-15: Providing and constructing non load bearing wall with solid
concrete blocks of size 400x100x200mm having a block density not less than
1800kg/m3 having a minimum average compressive strength of 4.00 N/mm2
confirming to IS 2185 (Part 1)2005 and constructed with CM 1:4, as per IS
5.28 Sqm
2572:2005 including cost of all materials, labour charges, scaffolding, curing,
hire charges of machineries etc., complete as per specifications. KBS No.5.4
Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4
5.29.1 and finished with CM 1:3 plastering and finishing cutting etc., complete. - of No
size 450 x 200 x 400 mm
Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4
5.29.2 and finished with CM 1:3 plastering and finishing cutting etc., complete. - of No
size 450 x 150 x 500 mm
Providing and fixing pre cast solid cement concrete kerb stones made out of
C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm
high and 450mm in length finished with CM 1:3 plastering and finishing
5.30 cutting, including form work, curing, including cost of all materials, labour, No
hire charges of machinery, loading, unloading, lead and lift, transportation
etc., complete.
Brick Work
Item Code Item Description Unit
KSRB 6-1.1 :Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 3.5
6.1 Newton per sqmm with mud mortar for basement and superstructure including cum
cost of materials, labour charges, scaffolding, curing complete as per
specifications Specification No. KBS 6.2.
KSRB 6-1.2 : Providing and constructing burnt brick masonry for basement
and superstructure with approved quality of non-modular bricks of standard
6.2 size of class designation 3.5Newton per sqmm with cement mortar1:8 cum
including cost of materials, labour charges, scaffolding, curing complete as
per specifications. Specification No. KBS 6.2
KSRB 6-1.3 : Providing and constructing burnt brick masonry for basement
and superstructure with approved quality of non-modular bricks of standard
6.3 size of class designation 3.5Newton per sqmm with cement mortar1:6 cum
including cost of materials, labour charges, scaffolding, curing complete as
per specifications. Specification No. KBS 6.2
KSRB 6-2.2 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 5.0Newton
6.5 per sqmm (table moulded) with cement mortar 1:8 for basement and cum
superstructu/re including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-2.3 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 5.0Newton
6.6 per sqmm (table moulded) with cement mortar 1:6 for basement and cum
superstructu/re including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-2.4 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 5.0
6.7 Newton per sqmm with cement mortar 1:4 for basement and superstructure cum
including cost of materials, labour charges, scaffolding, curing complete as
per specifications. Specification No. KBS 6.2
KSRB 6-3.1 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:8 for basement and superstructure (Machine
6.8 moulded Wirecut bricks) with cost of materials, labour charges, scaffolding, cum
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-3.2 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:6 for basement and superstructure (Machine
6.9 moulded Wirecut bricks) with cost of materials, labour charges, scaffolding, cum
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-3.3 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:4 for basement and superstructure (Machine
6.10 moulded Wirecut bricks) with cost of materials, labour charges, scaffolding, cum
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-3.4 : Providing and constructing burnt brick masonry with approved
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:3 for basement and superstructure (Machine
6.11 moulded Wirecut bricks) with cost of materials, labour charges, scaffolding, cum
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-4.2 : Providing and constructing burnt brick masonry with approved
quality of modular bricks ground moulded of standard size of class
6.13 designation 3.5Newton per sqmm with cement mortar 1:8 for basement and cum
superstructure with cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-4.3 : Providing and constructing burnt brick masonry with approved
quality of modular bricks ground moulded of standard size of class
6.14 designation 3.5Newton per sqmm with cement mortar 1:6 for basement and cum
superstructure with cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-5.2 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 5.0Newton per
6.16 sqmm (table moulded) with cement mortar 1:8 for basement and cum
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-5.3 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 5.0Newton per
6.17 sqmm (table moulded) with cement mortar 1:6 for basement and cum
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-5.4 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 5.0Newton per
6.18 sqmm (table moulded) with cement mortar 1:4 for basement and cum
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
KSRB 6-6.1 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:8 for
6.19 basement and superstructure including cost of materials, labour charges, cum
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-6.2 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:6 for
6.20 basement and superstructure including cost of materials, labour charges, cum
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-6.3 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:4 for
6.21 basement and superstructure including cost of materials, labour charges, cum
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-6.4 : Providing and constructing burnt brick masonry with approved
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:3 for
6.22 basement and superstructure including cost of materials, labour charges, cum
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-7.1 : Construction of partition wall 11.2 cms thick with non modular
ground moulded burnt bricks of class designation 3.5 Newton per sqmm with
cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured
out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm.
6.23 Sqm
wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour
charges, scaffolding, curing complete as per specifications. Specification No.
KBS 6.2
KSRB 6-7.2 : Construction of partition wall 11.2 cms thick with non modular
ground moulded burnt bricks of class designation 5.0 Newton per sqmm with
cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured
out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm.
6.24 Sqm
wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour
charges, scaffolding, curing complete as per specifications. Specification No.
KBS 6.2
KSRB 6-7.3 : Construction of partition wall 11.2 cms thick with non-modular
ground moulded burnt bricks of class designation 3.5 Newton per sqmm with
6.25 cement mortar 1:4 including cost of materials, labour charges, scaffolding, Sqm
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-7.4 : Construction of partition wall 11.2 cms thick with non-modular
ground moulded burnt bricks of class designation 5.0 Newton per sqmm with
6.26 cement mortar 1:4 including cost of materials, labour charges, scaffolding, Sqm
curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-8.1 :Construction of partition wall 10 cms thick with ground
moulded modular burnt bricks of class designation 3.5 Newton per sqmm with
cement mortar 1:4 including providing and fixing plaster mesh manufactured
out of hot dipped gelvanised iron of nominal thickness 0.35 mm. 100 mm.
6.27 Sqm
wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour
charges, scaffolding, curing complete as per specifications. Specification No.
KBS 6.2
KSRB 6-8.2 : Construction of partition wall 10 cms thick with table moulded
modular burnt bricks of class designation 5.0Newton per sqmm with cement
mortar 1:4 including providing and fixing plaster mesh manufactured out of
hot dipped gelvanised iron of nominal thickness 0.35 mm. 100 mm. wide as
6.28 Sqm
per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges,
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
KSRB 6-8.4 : Construction of partition wall 10 cms thick with table moulded
modular burnt bricks of class designation 5.0 Newton per sqmm with cement
6.30 mortar 1:4 including cost of materials, labour charges, scaffolding, curing Sqm
complete as per specifications. Specification No. KBS 6.2
Provinding and constructing non load bearing wall with Light Weight
Concrete (Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3)
1984 and IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin
6.32.2 layer of polymer based jointing solvent for super structure with neccesary Sqm
scaffolding, curing including cost of all materials, labour, lead& lift etc,
complete as per specifications. - with 600x200x150mm size Blocks
Provinding and constructing non load bearing wall with Light Weight
Concrete (Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3)
1984 and IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin
6.32.3 layer of polymer based jointing solvent for super structure with neccesary Sqm
scaffolding, curing including cost of all materials, labour, lead& lift etc,
complete as per specifications. - with 600x200x200mm size Blocks
Provinding and constructing non load bearing wall with Light Weight
Concrete (Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3)
1984 and IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin
6.32.4 layer of polymer based jointing solvent for super structure with neccesary Sqm
scaffolding, curing including cost of all materials, labour, lead& lift etc,
complete as per specifications. - with 600x200x230mm size Blocks
Steel and
Alluminium Work
KSRB 7.1 : Providing and fixing in position collapsible steel shutters with
single or double leaf with vertical channel 20mmx10mmx2mm braced with
flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron
sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and
7.1 nuts, locking arrangements, stoppers, handles on both sides with 7.5cms Sqm
openings at 10 cms. c to c applying a priming coat of red lead paint. cost of
materials, labour, HOM of machinery complete as per specifications. size of
gate 2.4mx1.4m. Specification No. KBS 7.7 / 7.12
KSRB 7.2 : Providing and fixing 1mm thick M.S. sheet sliding shutters with
frame and diagonal braces of 40x40x6 mm angle Iron 3.15mm thick M.S.
Gusset plates at junctions and corners, 25mm dia pulley, 40x40x6 mm angles
and T iron guide rail top and bottom respectively with handles, stoppers and
7.2 locking arrangements etc., including applying a priming coat of red lead paint Sqm
cost of materials, labour, HOM of machinery complete as per specifications. 1
double leaf door of size 2.4x2.4m. Specification No. KBS 7.8 / 7.12
KSRB 7.3 : Providing and fixing 1mm thick M.S. sheet garage door with
frame and diagonal braces of size 40x40x6 mm angle Iron, 3.15mm thick M.S.
Gusset plates at the junctions and corners, with handles, stoppers and locking
7.3 arrangements etc., including applying a priming coat of red lead paint cost of Sqm
materials, labour, HOM of machinery complete as per specifications. Double
leaf door of size 2.4x2.4m. Specification No. KBS 7.9 / 7.12
KSRB 7.4 : Providing and fixing 1mm thick M.S. sheet garage door with
frame and diagonal braces of size 40x40x6 mm angle Iron, using M.S. flats
30x6 mm for diagonal braces and central cross pieces 3.15mm thick M.S.
Gusset plates at the junctions and corners, with handles, stoppers and locking
7.4 Sqm
arrangements etc., including applying a priming coat of red lead paint cost of
materials, labour, HOM of machinery complete as per specifications. 1 double
leaf door of size 2.4x2.4m. Specification No. KBS 7.9 / 7.12
KSRB 7.5 : Providing and fixing pull and push type rolling shutters of
approved make out of 18 guage, 75mm wide cold rolled steel laths of convex
corrugation, with side guides and bottom rail, with interlocking arrangements
for steel laths by means of alternate clips, suspension shaft with High tension
coil type springs two numbers, mounted on specially designed pipe shaft, with
bracket plates, guide channels, ball bearing arrangements, for inside & outside
7.5 locking with push & pull operations complete including pulling hooks, 4Nos. Sqm
handles with all fittings and accessories, painted with a coat of red lead paint
(without top cover) cost of materials, labour, HOM of machinery complete as
per specifications. Shutter size 3mx2.8 m. Specification No. KBS 7.10 / 7.12
KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet
over pull and push rolling shutters bent to shape including cost of red lead
7.6 primer coat of painting , materials, labour, HOM of machinery complete as M
per specifications. Specification No. KBS 7.10.6 / 7.12
KSRB 7.7 : Providing and fixing in position in cement concrete 1:3:6 steel
glazed windows and ventilators side hung/top hung fully openable as per
approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both
for outer and inner frames and central mullion section of size 25x46x3mm.
weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839
kg/m for glazing of windows not more than 34 cms. c to c including providing
and fixing 4mm. thick reeded glass with teakwood beading of required size,
all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of
7.7 approved size, section should be cut to length welded and electrically grinded Sqm
subdividing frames of unit shall be tenonned and revetted into the frames
electrically. All the steel surface shall be throughly cleaned free of rust and
painted with one coat of anti-corosive paint and finishing with two coats of
ready mix paint of approved colour and make including cost of materials,
fixtures, labour and HOM of machinerycomplete as per specifications.
Specification No. KBS 7.12.1 / 7.12.2 / 7.12.3 / 7.12
KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel
glazed windows and ventilators side hung/top hung 2/3 openable 1/3 fixed as
per approved drawings using Z angles of 25x33x3mm, weighing 1.419 kg/m
both for outer and inner frames and central mullion section of size
25x46x3mm, weighing 2.28kg/m all duly providing T section 19x19x3mm
weighing 0.839 kg/m for glazing of windows, not more than 34 cms. c to c
including providing and fixing 4mm. thick reeded glass with teakwood
beading of required size, all steel sections should confirm to I.S 7452:1990,
7.8 4nos. of holdfasts of approved size, section should be cut to length welded and Sqm
grinded electrically subdividing frames of unit shall be tenonned and revetted
into the frames electrically. All the steel surface shall be throughly cleaned
free of rust and painted with one coat of anti-corrosive paint and finishing two
coats of ready mix paint of approved colour and make including cost of
materials, fixtures, labour charges and HOM of machinery complete as per
specifications.
KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators
weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of
M.S. flats and square rods as per approved design, drawing including cutting
7.9 steel sections and welding the same to required pattern with a coat of red lead kgs
primer, cost of materials, fixtures, labour and HOM of machinery complete as
per specifications. Specification No. KBS 7.12
KSRB 7.10 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using double track
window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom
section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659
kg/m; and shutter comprising top and bottom section of size 40mmx18mm,
1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick
weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick,
weight 0.469 kg/m. the shutters mounted on nylon rollers with approved
7.10.1 quality of fixtures such as aluminium handles tower bolts etc.; and providing Sqm
and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading
aluminium sections including cutting to required length, joints mitred
subdividing the frame tenonned and rivetted in the assembled frame stiffened
with end clips at corners angles etc., and fixed to the walls, lintels, floor
beams/cills as the case may be with necessary steel screws, raul plugs, or teak
wood gatties including cutting masonry or concrete and making good the
original surface using cement mortar, aluminium sections pretreated for
removal of any Specification No. KBS using aluminium section anodized to
12 - 15 microns.
KSRB 7.10 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using double track
window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom
section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659
kg/m; and shutter comprising top and bottom section of size 40mmx18mm,
1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick
weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick,
weight 0.469 kg/m. the shutters mounted on nylon rollers with approved
7.10.2 quality of fixtures such as aluminium handles tower bolts etc.; and providing Sqm
and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading
aluminium sections including cutting to required length, joints mitred
subdividing the frame tenonned and rivetted in the assembled frame stiffened
with end clips at corners angles etc., and fixed to the walls, lintels, floor
beams/cills as the case may be with necessary steel screws, raul plugs, or teak
wood gatties including cutting masonry or concrete and making good the
original surface using cement mortar, aluminium sections pretreated for
removal of any Specification No. KBS using aluminium section powdered
coated to a minimum of 60-70 microns with exterior durable pure polyester
KSRB 7.11 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using three track
window frame of size 92x31.75mm bottom section 1.3mm thick, weight
1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter
frame section comprising top and bottom section of size 40mmx18mm, wall
thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall
thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters
7.11.1 mounted on nylon rollers with approved quality of fixtures such as aluminium Sqm
handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for
shutters fitted with rubber beading all aluminium sections including cutting to
required length, joints mitred subdividing the frame tenonned and rivetted, in
the assembled frame, stiffened with end clips for corners, angles etc., and
fixed to the walls, lintels, floor beams/cills as the case may be, with necessary
steel screws, raul plugs or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar. using
aluminium section anodized to 12 - 15 microns.
KSRB 7.11 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using three track
window frame of size 92x31.75mm bottom section 1.3mm thick, weight
1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter
frame section comprising top and bottom section of size 40mmx18mm, wall
thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall
thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters
7.11.2 mounted on nylon rollers with approved quality of fixtures such as aluminium Sqm
handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for
shutters fitted with rubber beading all aluminium sections including cutting to
required length, joints mitred subdividing the frame tenonned and rivetted, in
the assembled frame, stiffened with end clips for corners, angles etc., and
fixed to the walls, lintels, floor beams/cills as the case may be, with necessary
steel screws, raul plugs or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar. using
aluminium section powdered coated to a minimum of 60-70 microns with
exterior durable pure polyester grade powder of approved quality.
KSRB 7.12 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using four track
window frame of size 122.2x31.75mm. for bottom section 1.1mm thick,
weight 1.205 kg/m; sides and top sections 1.2 mm. thick weight 1.093 kg/m;
shutter section comprising top and bottom section of size 40mmx18mm wall
thickness 1.25mm. weight 0.417 kg./m, shutter sideouter 40mmx18mm. wall
thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. weight 0.469 kg/m; shutters mounted
7.12.1 on nylon rollers with approved quality of fixtures such as aluminium handles, Sqm
tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters
fitted with rubber beading including cutting to required length, joints mitred
subdividing the frame, tenonned and rivetted in the assembled frame to be
stiffened with end clips at corners, angles etc.; fixed to the walls, lintels, floor
beams;cills, as the case may be with necessary steel screws, raul plugs, or teak
wood gatties including cutting masonry or concrete and making good the
original surface using cement mortar; aluminium sections pretreated for
removal of any rust and coated with greasy materials for non adhesion of
mortar and other sticky materials; ( this coating should be cleaned after
KSRB 7.12 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using four track
window frame of size 122.2x31.75mm. for bottom section 1.1mm thick,
weight 1.205 kg/m; sides and top sections 1.2 mm. thick weight 1.093 kg/m;
shutter section comprising top and bottom section of size 40mmx18mm wall
thickness 1.25mm. weight 0.417 kg./m, shutter sideouter 40mmx18mm. wall
thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. weight 0.469 kg/m; shutters mounted
7.12.2 on nylon rollers with approved quality of fixtures such as aluminium handles, Sqm
tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters
fitted with rubber beading including cutting to required length, joints mitred
subdividing the frame, tenonned and rivetted in the assembled frame to be
stiffened with end clips at corners, angles etc.; fixed to the walls, lintels, floor
beams;cills, as the case may be with necessary steel screws, raul plugs, or teak
wood gatties including cutting masonry or concrete and making good the
original surface using cement mortar; aluminium sections pretreated for
removal of any rust and coated with greasy materials for non adhesion of
mortar and other sticky materials; ( this coating should be cleaned after
KSRB 7.13 : Providing and fixing aluminium casement windows,
combination of fixed glazing at top fully openable windows using Z sections
of 33mm, web thickness 4mm, weight 0.663 kg/m; central mullion section
59x33mm with web thickness 3mm section weight 1.123kg/m; the shutters on
aluminium hinges with approved quality of fixtures such as aluminium tower
bolts, handles, stays etc., providing and fixing 5.5mm plain glass for shutters
fitted with glazed clips 19mmx17.3mmx11mm. 0.9mm thick and rubber
beading, aluminium sections cutting to required length, joints metered,
7.13.1 subdividing the frame tennoned and rivetted, assembled frame to be stiffened Sqm
with end clips at corner, angles and fixed to wall, lintel beam, floor;cill, as the
case may be with necessary screws, rawl plugs, cutting masonry or concrete
and making good the orginal surface; aluminium surface pretreated for
removal of any rust and coated with greasy materials for nonadherence of
mortar or any other sticky materials; (coating removed after instalation) and
throughly cleaned free from dirt, rust etc., including cost of materials, fixtures,
labour and HOM of machinery complete as per specifications. using
aluminium section anodized to 12 - 15 microns.
KSRB 7.13 : Providing and fixing aluminium casement windows,
combination of fixed glazing at top fully openable windows using Z sections
of 33mm, web thickness 4mm, weight 0.663 kg/m; central mullion section
59x33mm with web thickness 3mm section weight 1.123kg/m; the shutters on
aluminium hinges with approved quality of fixtures such as aluminium tower
bolts, handles, stays etc., providing and fixing 5.5mm plain glass for shutters
fitted with glazed clips 19mmx17.3mmx11mm. 0.9mm thick and rubber
beading, aluminium sections cutting to required length, joints metered,
7.13.2 subdividing the frame tennoned and rivetted, assembled frame to be stiffened Sqm
with end clips at corner, angles and fixed to wall, lintel beam, floor;cill, as the
case may be with necessary screws, rawl plugs, cutting masonry or concrete
and making good the orginal surface; aluminium surface pretreated for
removal of any rust and coated with greasy materials for nonadherence of
mortar or any other sticky materials; (coating removed after instalation) and
throughly cleaned free from dirt, rust etc., including cost of materials, fixtures,
labour and HOM of machinery complete as per specifications. using
aluminium section powdered coated to a minimum of 60-70 microns with
exterior durable pure polyester grade powder of approved quality.
KSRB 7.14 : Providing, fabricating, assembling and fixing in position
aluminium partitions using sections in combination of plain, single grove and
double grove as per requirements for the frames of overall size 101.6mm x
44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single
grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46
kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section
weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated
sheet both side of approved colour lamination exterior grade; aluminium
sections of mat finish or glossy finish using section, spacing of vertical
7.14.1 member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, Sqm
joints mitered and corners grinded subdividing frames tennoned and rivetted
to the frames, the assembled frame should be stiffened with corner angles
stripped and fixed with screws, rawl plugs and teak wood gutties to
R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor
at bottom, including cutting chistling and making good with cement mortar to
match the surface, providing and fixing bottom panel filled with the materials
to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle
portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and
panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm.
KSRB 7.14 : Providing, fabricating, assembling and fixing in position
aluminium partitions using sections in combination of plain, single grove and
double grove as per requirements for the frames of overall size 101.6mm x
44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single
grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46
kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section
weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated
sheet both side of approved colour lamination exterior grade; aluminium
sections of mat finish or glossy finish using section, spacing of vertical
7.14.2 member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, Sqm
joints mitered and corners grinded subdividing frames tennoned and rivetted
to the frames, the assembled frame should be stiffened with corner angles
stripped and fixed with screws, rawl plugs and teak wood gutties to
R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor
at bottom, including cutting chistling and making good with cement mortar to
match the surface, providing and fixing bottom panel filled with the materials
to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle
portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and
panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm.
KSRB 7.15 : Providing, fabricating, assembling and fixing in position
aluminium partitions using aluminium sections of mat finish or glassy finish
in combination of plain grove, single grove and double grove as per
requirements for the frames of overall size 63.5mm x 38.1mm. with thickness
of 2mm. having section weight, plain sections 1.054kg/m, single grove
thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm
section weight 1.094kg/m and bottom member 114.3 mm. x 44.45mm.
thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size
36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions
7.15.1 provided with 12mm. thick prelaminated sheet both sides of approved colour Sqm
lamination exterior grade upto 0.9m height, spacing of vertical member not
exceeding 0.6 m. c to c; sections are cut to the required lengths, joints mitered
and corners grinded subdividing frames tennoned and rivetted to the frames;
the assembled frame stiffened with corner angles, stripped and fixed with
screws, rawl plugs and teak wood gutties to R.C.C.columns on sides, R.C.C.
lintels or beams at top and floor at bottom, including cutting chistelling and
making good with cement mortar to match the surface; providing and fixing
5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top
panel with louvres sections; the glass and panels fitted withglazing clips of
KSRB 7.15 : Providing, fabricating, assembling and fixing in position
aluminium partitions using aluminium sections of mat finish or glassy finish
in combination of plain grove, single grove and double grove as per
requirements for the frames of overall size 63.5mm x 38.1mm. with thickness
of 2mm. having section weight, plain sections 1.054kg/m, single grove
thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm
section weight 1.094kg/m and bottom member 114.3 mm. x 44.45mm.
thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size
36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions
7.15.2 provided with 12mm. thick prelaminated sheet both sides of approved colour Sqm
lamination exterior grade upto 0.9m height, spacing of vertical member not
exceeding 0.6 m. c to c; sections are cut to the required lengths, joints mitered
and corners grinded subdividing frames tennoned and rivetted to the frames;
the assembled frame stiffened with corner angles, stripped and fixed with
screws, rawl plugs and teak wood gutties to R.C.C.columns on sides, R.C.C.
lintels or beams at top and floor at bottom, including cutting chistelling and
making good with cement mortar to match the surface; providing and fixing
5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top
panel with louvres sections; the glass and panels fitted withglazing clips of
KSRB 7.16 : Providing, fabricating, assembling and fixing in position
aluminium shutters to the existing door frame in the partition using
47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical
frame; 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section,
49.91mmx44.45mm with wall thickness 3mm, weight 1.495kg/ m for central
rail; and 114.3mmx44.45mm thickness 3.18mm, weight 2.646kg/m for bottom
rail; aluminium sections and cut to length joint metred and corners grinded,
the bottom rail and top rail hinged or pivoted, opening arrangements including
providing and fixing standard approved accessories, such as aluminium
7.16.1 handles, tower bolts, lock, pivots: hinges P.V.C. or rubber gasket, 12mm Sqm
prelaminated sheets ( Novopan) exterior grade of approved colour both sides
same colour for bottom panel of maximum height 0.90m and 5.5mm thick
plain glass for top panel ( Novopan ) and glass fixed with glazed clips
19mmx17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections
treated for removal of any rust and prevention of further rust formation, and
coated with greasy materials for non-adherance of mortars or any other sticky
materials, including cost of materials, fixtures, labour and HOM of machinery
complete as per specifications. using aluminium section anodized to 12 - 15
microns.
KSRB 7.16 : Providing, fabricating, assembling and fixing in position
aluminium shutters to the existing door frame in the partition using
47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical
frame; 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section,
49.91mmx44.45mm with wall thickness 3mm, weight 1.495kg/ m for central
rail; and 114.3mmx44.45mm thickness 3.18mm, weight 2.646kg/m for bottom
rail; aluminium sections and cut to length joint metred and corners grinded,
the bottom rail and top rail hinged or pivoted, opening arrangements including
providing and fixing standard approved accessories, such as aluminium
7.16.2 handles, tower bolts, lock, pivots: hinges P.V.C. or rubber gasket, 12mm Sqm
prelaminated sheets ( Novopan) exterior grade of approved colour both sides
same colour for bottom panel of maximum height 0.90m and 5.5mm thick
plain glass for top panel ( Novopan ) and glass fixed with glazed clips
19mmx17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections
treated for removal of any rust and prevention of further rust formation, and
coated with greasy materials for non-adherance of mortars or any other sticky
materials, including cost of materials, fixtures, labour and HOM of machinery
complete as per specifications. using aluminium section powdered coated to a
minimum of 60-70 microns with exterior durable pure polyester grade powder
KSRB 7.17 : Providing, fabricating, assembling and fixing in position
aluminium doors using following aluminium mat finish or glossy finish, outer
frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404
kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm,
section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm,
section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm,
section weight 2.646kg/m, door central section 49.91x44.45mm thickness
3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness
0.9mm section weight 0.124kg/m; aluminium sections cut to length joint
7.17.1 metred cornersgrinded, the shutters pivoted opening arrangement with heavy Sqm
duty aluminium alloy automatic door closures floor mounted, providing and
fixing standard approved accessories, such as aluminium handle for full width
or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick
plain glass for top and bottom panel; aluminium sections treated for removal
of any rust and prevention of further rust formation, and coated with greasy
materials for non-adherance of mortars or any other sticky materials; the
assembled frame fitted with the corner angles, strips and fitted with screws,
rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams
and flooring in bottom. including cutting, chistling and making good with
KSRB 7.17 : Providing, fabricating, assembling and fixing in position
aluminium doors using following aluminium mat finish or glossy finish, outer
frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404
kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm,
section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm,
section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm,
section weight 2.646kg/m, door central section 49.91x44.45mm thickness
3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness
0.9mm section weight 0.124kg/m; aluminium sections cut to length joint
7.17.2 metred cornersgrinded, the shutters pivoted opening arrangement with heavy Sqm
duty aluminium alloy automatic door closures floor mounted, providing and
fixing standard approved accessories, such as aluminium handle for full width
or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick
plain glass for top and bottom panel; aluminium sections treated for removal
of any rust and prevention of further rust formation, and coated with greasy
materials for non-adherance of mortars or any other sticky materials; the
assembled frame fitted with the corner angles, strips and fitted with screws,
rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams
and flooring in bottom. including cutting, chistling and making good with
Providing and fixing of Aluminium composite panel of approved make and
colour for wall cladding for straight Brick!Rcc/8tone walls & columns/ beams
with necessary aluminium frame works at required level made out of
50x25x4mm C section or equivalent. The panel should consist of 3mm thick
non-halogonated FR grade mineral based polymer core (2 hrs fire resistance as
per A8TM E119-12 & clause B, 81, do as per 88476 EN 13501) sandwiched
between 0.50mm skin thick aluminium sheet making a total panel thickness of
7.18 4mm. The surfaces will be finished with PVDF based coating on topsides and Sqm
service coating on reverse sides would be in polyester paint. The system shall
be fixed using Gl brackets, aluminium L cleats and stainless steel bolts and
nuts complete with spring washer and cap nuts and all other necessary
accessories, sealing shall be done using weather sealant of Dow Corning 789
with necessary rods etc , complete.
"Providing fusion bonded epoxy coating not less than 175 microns thickness
and upto 300 microns to reinforcement of all diameters as per IS: 13620-1993
including testing of coating at plant. The rate is inclusive of cost on account of
careful handling, PVC coated binding wire instead of GI Binding wire, touch
7.21.1 up material supplied by coating agency, repair work, loading, unloading and Tonne
straightening of bent rods etc., complete as per specification and as directed by
the Engineer in charge. (Inclusive of all taxes but excluding transportation
charges) For 10mm to 16mm dia bars
"Providing fusion bonded epoxy coating not less than 175 microns thickness
and upto 300 microns to reinforcement of all diameters as per IS: 13620-1993
including testing of coating at plant. The rate is inclusive of cost on account of
careful handling, PVC coated binding wire instead of GI Binding wire, touch
7.21.2 up material supplied by coating agency, repair work, loading, unloading and Tonne
straightening of bent rods etc., complete as per specification and as directed by
the Engineer in charge. (Inclusive of all taxes but excluding transportation
charges) For 20mm to 32mm dia bars
Providing and fixing door frame with or without ventilator made out of cold
rolled steel section of thickness 1.25mm formed into section of 60mm x
105mm welded to form a rectangular door conforming to IS 513-1973 and
phosphated and painted and with one coat of red oxideprimer, two coat of
approved enamel paints the frame work with 4nos. of hold fast of size 200 x
7.23 25 x 4mm fixed in cement concrete 1:3 :6 of 20mm down size jelly and 4nos. Sqm
of ISI marked hinges 125mm long welded to the frame and fixed with shutter
made out of Honne wood styles and rails of 30mm thick with panels of 12mm
thick
"Providing and fixing cold rolled prepainted steel windows of IS standards,
made out of 0.6mm thick deep drawing quality galvanised on both sides
120gms/sq.mtr. Primer coat upto 5 microns with thermosetting epoxy resin
and finish painted with a polyester based paint 20 microns thick. The size of
profiles is approximately 46 x 52mm for external frames, 46x46mm section
for shutters, 46x70mm section for centre mullion/transom and 18x31mm
section is for fixing glasses. The section should be cut to length joint mitred
and assembling by means of corner brackets made out of cold rolled cold
7.24.1.a annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated Sqm
self taping screws.The shutters are provided with approved quality of fixtures
like handles made out of zamac alloy die cast and powder coated, receiver
made out of glass filled nylone and hinges made out of CRCA powder coated.
4mm thick glass should be fixed with EPDM gaskets. Guard bars fabricated
out of 10mm square bright bars shall be fixed horizontally at 125mm C/C by
rivetting to the external frame. The above frames are fixed to the concrete /
masonry walls by means of self expanding screws.
"Supplying and fixing pressed steel window frame of size 100 x 50mm
manufactured from 1.25 mm thick carbon steel or imported steel strips with
neat mitred joints at 900degree for window openings and shall be suitable to
fix M.S. grills as per design and drawings using 12mm dia rods at 100mm
Centre to Centre horizontally and two members of M.S flats of 6mmx40mm
size at 150mm apart, welded into a frame of 6mmx40mm size M.S. flats with
16mm size lugs, and 8 Nos. of 100mm size hinges, 4 Nos of Butt Stay pins
and 4 Nos. Tower bolts and shutters half panelled and hallf glazed with
shutters made out of seasoned honne wood, styles of 30mm thick and 100mm
7.27 width and rails of 30mm thick and 100mm width and using 4mm thick pin Sqm
headed glass and panel, filling with 12mm thick particle board of exterior
grade bonded with phenol formal dehide resin and the shutter shall be rot
proof vermin proof, heat resistant guaranteed against shrinkage, warp age and
such other defects for a period of 3 years.This shall be as per approved
drawing, specification and direction including cost of conveyance,
manufacturing painting with 2 coats enamel paint over one coat of primer, cost
of labour for all items of work, machinery, equipment and all other incidental
charges with all lead, lift loading and unloading etc., complete. The Hollow
portion of the frame to be filled with cement concrete 1:2:4.
Providing electric welding using carbon electrodes including cost of welding
7.28 machine, power charges, welding rods, and labour charges for welding etc., cm
complete as per specification.
Fabricating, supplying and erecting M.S. TubularTruss of span upto 10m. The
bottom and top member is provided with 50x50x6mm double equal angles,
welded back to back and in between top and bottom line, in areas of mid
section is provided with 50x50x6mm equal single angle for vertical and
inclined members and at supporting ends 40x40x5mm single angle is
provided. All the members are welded together with 6mm gusset plate as per
Drawing. The entire truss is anchored in RCC column by using 4 Nos. of M.S.
anchor bolts at each support, with 10mm thick base plate and shoe plate.The
7.29 work includes cutting, straightening, placing in position of M.S angle and kgs
wleding wherever necessary, and applying one coat of red oxide primer coat
to all themembers including cost of all materials, labour charges, and hire
charges of machineries for cutting, welding, grinding and erection equipments,
with all lead and lift, transportation, etc., complete as per specification.
Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The
bottom & top member is provided with 50x50x6mm double equal angles,
welded back to back and in between top & bottom line, in areas of mid section
is provided with 50x50x6mm equal single angle for vertical and inclined
members and at supporting ends 40x40x5mm single angle is provided. All the
members are welded together with 6mm gusset plate as per Drawing No.CBS/
SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by
using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate
7.30 and shoe plate.The work includes cutting, straightening, placing in position of kgs
M.S angle and wleding wherever necessary, and applying one coat of red
oxide primer coat to all the members including cost of all materials, labour
charges, & hire charges of machineries for cutting, welding, grinding &
erection equipments, etc., complete as per specification
Providing and fixing M.S.Grill over existing compound wall as per Chief
Architect drawing No. 12686, using 16mm x 16mm M.S.Square rod at
150mm c/c spacing and 6mm x 40mm M.S. flats at horizontal and 6mm
x12mm M.S. flat for ornamental design and providing shop edge design at the
vertex of every vertical rods, including welding, grinding wherever necessary.
7.36 All the steel surface should be thoroughly cleaned free of rust and painted Sqm
with anti corrosive paint (shop paint) etc., complete. The work includes cost of
all materials, labour charges for all items of work, hire charges for welding,
cutting and grinding equipment, and electricity charges, etc., complete as per
specification.
Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm
x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as
shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for
verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S.
flats for horizontal member and at the top cast iron spikes are provided at
alternate vertical members asshown in the drawing etc., complete. All the steel
7.37 surface should be thoroughly cleaned free of rust and painted with anti Sqm
corrosive paint (shop paint) etc., complete. The work includes cost of all
materials, labour charges for all items of work, hire charges for welding,
cutting and grinding equipment, and electricity charges, with lead and lift,
loading and unloading charges, etc., complete as per specifiocation.
Providing and fixing Stainless steel staircase raling as per Chief Architect
Drawing No. 11520/ HRSC with hand rail 50mm dia 16 guage hollow pipe
welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical
pipe spaced at 1.20m regular intervals, and 5 Nos of 25mm dia. Stainless steel
7.38 hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The Sqm
entire assembly is fixed to staircase concrete by using expansion bolts by
drilling concrete etc., complete including cost of materials, labour, HOM of
machineries and electrical charges, etc., complete as per specifications.
Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes
for Ramps or Staircase are made out of stainless steel hallow pipes, using
50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by
drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of
Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally
for 2-rows top, one pipes are fixed with vertical pipes another one are fixed
with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top
measure @ equal intervals including cutting, welding, bending wherever
7.39 necessary with suitable caps @ tops, bottoms & corners finishing with mat / Sqm
shining etc., complete including cost and conveyance of all materials, labour
for all items of work, HOM of equipment with all lead and lift, loading and
unloading, transportation charges and all other incidental charges etc.,
complete as per specification and directions of the Engineer-in-charge of the
work. Ramps or Staircase for physically challenged.
Roofing
Item Code Item Description Unit
KSRB 8.1 : Providing and fixing in position stone slab roofing 10 to 12 cms
thick laid to line and level over wooden rafters or R.C.C. battens, pointing
8.1 exposed joints with cement mortar 1:4 including cost of materials, labour, Sqm
curing complete as per specifications. ( wooden rafters and R.C.C. battens to
be paid seperately ) Specification No. KBS
KSRB 8.2 : Providing and fixing in position black cuddapah slab / Shahabad
slab / Thandur blue slab 4 cms thick for roofing laid to line and level over
8.2 wooden rafters or R.C.C. battens pointing exposed joints with cement mortar Sqm
1:4 including cost of materials, labour, curing complete as per specifications.
(wooden rafters and R.C.C. battens to be paid seperately )
KSRB 8.3-1 : Providing and laying to required line and slope roofing with
corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L
8.3 hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the Sqm
existing purlins, rafters and trusses including cost of materials, labour,
complete as per specifications. Specification No. KBS 8.5
KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 ( 1 cement :
15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to
8.4 slope compacting, including cost of materials, labour, curing complete as per cum
specifications.
KSRB 8.6-1 : Providing and fixing on wall surface cast iron rain down water
pipes 75mm dia including filling the joints with spun yarn soaked in neat
8.5 cement slurry 1:2 with necessary specials like shoes, bends and offsets fixed M
with iron clamps, wall plugs, screws, including cost of materials, labour,
complete as per specifications.
KSRB 8.3-2 : Providing and laying to required line and slope roofing with
semi-corrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with
8.6 galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen Sqm
washers, over the existing purlins, rafters and trusses including cost of
materials, labour, complete as per specifications.
KSRB 8.3-3 Extra for A.C. sheet corrugated / semi-corrugated sheet roofing
8.7 Sqm
with vertical sheeting to a pitch exceeding 60 degrees
KSRB 8.3-4 : Providing and fixing ridges, hips with asbestos cement sheet
roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen
8.8 washers, serrated or plain wings, adjustable ridges, including cost of materials, M
labour, complete as per specifications.
KSRB 8.3-5 : Providing and fixing northlight adjustable ridges, hips with
asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia
8.9 G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, M
including cost of materials, labour, complete as per specifications.
KSRB 8.4-1 : Providing and fixing Mangalore tile roofing using first class
tiles with necessary special tiles for ridges and hips, teak wood reepers of size
8.10 50x25mm and pointed with cement mortar 1:4 over the existing rafters Sqm
including cost of materials, labour, curing complete as per specifications.
Specification No. KBS 8.17
KSRB 8.4-2 :Providing and fixing Mangalore tile roofing using first class tiles
with necessary special tiles for ridges and hips,nandi wood reepers of size
8.11 50x25mm and pointed with cement mortar 1:4 over the existing rafters Sqm
including cost of materials, labour, curing complete as per specifications.
Specification No. KBS 8.17
KSRB 8.4-3 : Providing and fixing Mangalore tile roofing using first class
tiles with necessary special tiles for ridges and hips,jungle wood reepers of
8.12 size 50x25mm and pointed with cement mortar 1:4 over the existing rafters Sqm
including cost of materials, labour, curing complete as per specifications.
Specification No. KBS 8.17
KSRB 8.6-3 : Providing and fixing on wall surface asbestos cement rain down
water pipes 75mm dia including filling the joints with spun yarn soaked in
neat cement slurry 1:2 with necessary specials like shoes, bends and offsets
8.14 fixed with iron clamps, wall plugs, screws, including cost of materials, labour, M
curing complete as per specifications. Specification No. KBS 8.27, 8.28
KSRB 8.6-4 : Providing and fixing on wall surface asbestos cement rain down
water pipes 100 mm dia including filling the joints with spun yarn soaked in
neat cement slurry 1:2 with necessary specials like shoes, bends and offsets
8.15 fixed with iron clamps, wall plugs, screws, including cost of materials, labour, M
curing complete as per specifications. Specification No. KBS 8.27, 8.28
KSRB 8.6-5 : Providing and fixing on wall surface 2.5 kg / sq.cm H.D.P.E.
rain down water pipes 90 mm outer dia approved make and brand with
8.16 necessary specials like shoes, bends and offsets fixed with iron clamps, wall M
plugs, screws, including cost of materials, labour, curing complete as per
specifications.
KSRB 8.6-6 : Providing and fixing on wall surface 2.5kg / sq.cm H.D.P.E.
rain down water pipes 110mm outer dia approved make and brand with
8.17 necessary specials like shoes, bends and offsets fixed with iron clamps, wall M
plugs, screws, including cost of materials, labour, curing complete as per
specifications.
KSRB 8.6-7 : Providing and fixing on wall surface 4.0 kg / sq.cm H.D.P.E.
rain down water pipes 90 mm outer dia. approved make and brand with
8.18 necessary specials like shoes, bends and offsets fixed with iron clamps, wall M
plugs, screws, including cost of materials, labour, complete as per
specifications.
KSRB 8.7-1 :Providing and fixing in position 10mm thick plaster of paris
( Gypsum anhydrous ) for ceiling flat surface upto a height of 5 m above floor
8.20 level over aluminium 25mm / 6mm with 10mm gap in between and reinforced Sqm
with rabbit wire mesh fixed to metal frames including cost of materials,
labour, curing complete as per specifications.
KSRB 8.7-2 : Providing and fixing in position 10mm thick plaster of paris
( Gypsum anhydrous ) for ceiling curved surface upto a height of 5 m above
8.21 floor level overaluminium strips 25mm / 6mm with 10mm gap in between and Sqm
reinforced with rabbit wire mesh fixed to meatal frames including cost of
materials, labour, curing complete as per specifications.
KSRB 8.7-3 : Extra over item No. 8.7-1 and 8.7-2 for any sunk or raised
8.22 Sqm
moulded design plaster of paris ( Gypsum anhydrous ) ceiling
KSRB 8.7-4 : Extra over item No. 8.7-1 and 8.7-2 for providing plaster of
8.23 Sqm/M
paris (Gypsum anhydrous ) ceiling above 5 m height from floor level
KSRB 8.7-5 : Providing and fixing in position 12mm thick plaster of paris
( Gypsum anhydrous ) for ceiling flat surface with ceiling tiles upto a height of
8.24 5 m above floor level over wooden frames and rendered smooth with plaster Sqm
of paris ( frame work to be measured and paid for seperately ) including cost
of materials, labour, curing complete as per specifications.
KSRB 8.7-6 : Extra over item No. 8.7-5 for providing plaster of paris
8.25 Sqm
(Gypsum anhydrous ) ceiling tiles above 5 m height from floor level
Providing top layer with 12mm thick silica latex plaster with smooth finishing
8.26 Sqm
on top surface.
Providing and fixing 6mm clear I opal white I solar I bronze I blue I green
tinted multi wall poly carbonate sheet for tubular structure. The work
including cost of all materials, labour charges and hire charges of machineries
for cutting, welding, grinding and erection equipments, with all lead and lifts,
8.27 Sqm
transportation, loading and unloading and all other incidental charges etc.
complete as per specification and directions of the engineer in charge of the
work.
Providing and Fixing 15 mm thick densified tegular edged eco friendly light
weight calcium silicate false ceiling tiles of approved texture of size 595 x 595
mm in true horizontal level, suspended on inter locking metal grid of hot
dipped galvanized steel sections (galvanizing @ 120 grams per sqm including
both side) consisting of main 'T' runner suitably spaced at joints to get
required length and of size 24 x 38 mm made from 0.33 mm thick (minimum)
sheet, spaced 1200 mm centre to centre, and cross 'T' of size 24 x 28 mm
made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main
8.28 'T' at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary Sqm
cross 'T' of length 600 mm and size 24 x 28 mm made of 0.33 mm thick
(minimum) sheet to be inter locked at middle of the 1200 x 600 mm panel to
from grid of size 600 x 600 mm, resting on periphery walls I partitions on a
Perimeter wall angle pre-coated steel of size (24 x 24 x 3000 mm made of 040
mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to
centre with 25 mm long dry wall screwes at 230 mm intervals and laying 15
mm thick densifed edges calcium silicate ceiling tiles of approved texture in
the grid, including cutting I making opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc., wherever required. Main 'T'
Providing and fixing of pre pigmented extruded orange cement roof tiles of
size 420mm x 330mm with necessary specials such as Ridges, Barges and
Nails etc. including cast of providing PVC (6.00kgs/sq em) gutters of min 6"
8.29 radius and down water pipes of 4" dia as per the roof design on EXISTING Sqm
MSNVOODEN ROOF or TRUSS. Including cost of materials, scaffoldings,
labour etc., compelte as per specifications.
Providing and fixing of pre pigmented extruded orange cement roof tiles of
size 420mm x 330mm with necessary specials such as Ridges, Barges and
Nails etc, including cost of providing PVC (6.00kgs/ sqcm) gutters of min 6"
8.30 radius and down water pipes of 4" dia as per roof design on EXISTING Sqm
CONCRETE SLOPING ROOF SLAB. Including cost of mortar band, all
materials labour as per specifications.
Wood Work
Item Code Item Description Unit
KSRB 9-1 :Labour for providing Teak wood wrought and putup for purlins,
9.1 common rafters and similar work including cost of labour, HOM of cum
machineries complete as per specifications. Specification No. KBS 9.4
KSRB 9-2.1 :Providing Honne wood wrought and putup for purlins, common
9.2 rafters and similar work including cost of materials, labour, HOM of cum
machineries complete as per specifications. Specification No. KBS 9.27
KSRB 9-2.2 :Providing Mathi / Nandi wood wrought and putup for purlins,
9.3 common rafters and similar work including cost of materials, labour, HOM of cum
machineries complete as per specifications. Specification No. KBS 9.27
KSRB 9-2.3 :Providing Sal wood wrought and putup for purlins, common
9.4 rafters and similar work including cost of materials, labour, HOM of cum
machineries complete as per specifications. Specification No. KBS 9.27
KSRB 9-2.4 :Providing Jungle wood such as Nerale, Neem wrought and
putup for purlins, common rafters and similar work including cost of
9.5 materials, labour, HOM of machineries complete as per specifications. cum
Specification No. KBS 9.27
KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory
windows, ventilators and other frames, wrought, framed or assembled
9.10 including making plaster groves ( excluding cost of cement concrete and side cum
clamps ), but including cost of materials, labour, HOM of machineries
complete as per specifications. Specification No. KBS 9.33
KSRB 9.4-5 : Providing RED Sal wood frames of doors, windows, clerestory
windows, ventilators and other frames, wrought, framed or assembled
9.13.1 including making plaster groves ( excluding cost of cement concrete and side cum
clamps ), but including cost of materials, labour, HOM of machineries
complete as per specifications. Specification No. KBS 9.33
KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood
shutters for doors, styles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.14 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. ( excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood
shutters for doors, styles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.15 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. ( excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-6.1 : Providing and fixing in position fully panelled Teak wood
shutters for doors, styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.17 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. ( excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-6.2 : Providing and fixing in position fully panelled Honne wood
shutters for doors, styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.18 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. ( excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-6.3 : Providing and fixing in position fully panelled Mathi/ Nandi
wood shutters for doors, styles and rails of 35mm. thick with bottom and lock
rails 180mm wide top rail and styles 100mm wide as per drawing and panels
9.19 of 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. ( excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-7.1 : Providing and fixing in position fully panelled Teak wood
shutters for doors, styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.20 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-7.2 : Providing and fixing in position fully panelled Honne wood
shutters for doors, styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.21 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-7.3 :Providing and fixing in position fully panelled Mathi/ Nandi
wood shutters for doors, styles and rails of 30mm. thick with bottom and lock
rails 180mm wide top rail and styles 100mm wide as per drawing and panels
9.22 of 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-8.1 : Providing and fixing in position fully panelled Teak wood
shutters for doors, styles and rails of 25mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.23 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-8.2 : Providing and fixing in position fully panelled Honne wood
shutters for doors, styles and rails of 25mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.24 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-8.3 : Providing and fixing in position fully panelled Mathi/ Nandi
wood shutters for doors, styles and rails of 25mm. thick with bottom and lock
rails 180mm wide top rail and styles 100mm wide as per drawing and panels
9.25 of 25mm thick including cost of materials, labour, HOM of machineries Sqm
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34
KSRB 9-9.1: Providing and fixing in position Teak wood half panelled and
half glazed shutters for doors, styles and rails of 40mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.26 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-9.2: Providing and fixing in position Honne wood half panelled and
half glazed shutters for doors, styles and rails of 40mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.27 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-10.1 : Providing and fixing in position Teak wood half panelled and
half glazed shutters for doors, styles and rails of 35mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.28 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures )
KSRB 9-10.2 :Providing and fixing in position Honne wood half panelled and
half glazed shutters for doors, styles and rails of 35mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.29 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-11.1 : Providing and fixing in position Teak wood half panelled and
half glazed shutters for doors, styles and rails of 30mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.30 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-11.2 : Providing and fixing in position Honne wood half panelled and
half glazed shutters for doors, styles and rails of 30mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 25mm thick, 4mm thick plain glass, fixed with beading 15mm wide
9.31 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-12.1 : Providing and fixing in position Teak wood half panelled and
half glazed shutters for doors, styles and rails of 30mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 20mm thick, 4mm. thick plain glass, fixed with beading 15mm wide
9.32 Sqm
and thickness to finish with the shutters surface including cost of materials,
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-12.2 : Providing and fixing in position Honne wood half panelled and
half glazed shutters for doors, styles and rails of 30mm. thick with bottom and
lock rails 180mm wide top rail and styles 100mm wide as per drawing and
panels of 20mm thick, 4mm. thick plain glass, fixed with beading 15mm wide
9.33 and thickness to finish with the shutters surface including cost of materials, Sqm
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-13-1: Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.34 Sqm
board of approved colour on both sides including cost of materials, labour,
HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.4
KSRB 9-13-2 : roviding and fixing in position shutters for doors made out of
Honne wood styles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.35 Sqm
board of approved colour on both sides including cost of materials, labour,
HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.4 on one side
KSRB 9-13-3 : Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.36 18mm thick of exterior grade plain particle board including cost of materials, Sqm
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.26.3
KSRB 9-14-1: Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.37 Sqm
board of approved colour on both sides including cost of materials, labour,
HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.4
KSRB 9-14-2 : Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.38 Sqm
board of approved colour on one side including cost of materials, labour,
HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.4 one side
KSRB 9-14-3 : Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.39 18mm thick of exterior grade plain particle board including cost of materials, Sqm
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.26.3
KSRB 9-15-1: Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.40 Sqm
board of approved colour on both sides including cost of materials, labour,
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3
KSRB 9-15-2 : Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
18mm thick of exterior grade Melamine impregnated prelamination particle
9.41 Sqm
board of approved colour on one side including cost of materials, labour,
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3 one side
KSRB 9-15-3 : Providing and fixing in position shutters for doors made out of
Honne wood styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of
9.42 18mm thick of exterior grade Plain particle board including cost of materials, Sqm
labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.26.3
KSRB 9-16.1 : Providing and fixing in position Teak wood fully panelled
shutters for windows with styles and rails of 35mm. thick, 75mm wide in two
9.43 halves with panels of 25mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-16.2 : Providing and fixing in position Honne wood fully panelled
shutters for windows with styles and rails of 35mm. thick, 75mm wide in two
9.44 halves with panels of 25mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-16.3 : Providing and fixing in position Mathi/ Nandi wood fully
panelled shutters for windows with styles and rails of 35mm. thick, 75mm
9.45 wide in two halves with panels of 25mm thick including cost of materials, Sqm
labour charges, HOM of machineries complete as per specifications.
(excluding cost of fixtures ) Specification No. KBS 9.34
KSRB 9-16.4 : Providing and fixing in position fully panelled shutters for
windows with Honne wood styles and rails of 35mm. thick, 75mm wide in
two halves with panels provided with NUWUD ( MDF ) of 25mm thick
9.46 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34,
9.26.3
KSRB 9-17.1 : Providing and fixing in position Teak wood fully panelled
shutters for windows with styles and rails of 30mm. thick, 75mm wide in two
9.47 halves with panels of 20mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-17.2 : Providing and fixing in position Honne wood fully panelled
shutters for windows with styles and rails of 30mm. thick, 75mm wide in two
9.48 halves with panels of 20mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-17.4 : Providing and fixing in position fully panelled shutters for
windows with Honne wood styles and rails of 30mm. thick, 75mm wide in
two halves with panels provided with NUWUD ( MDF ) of 18mm thick
9.50 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34,
9.26.3
KSRB 9-18.1 : Providing and fixing in position Teak wood fully panelled
shutters for windows with styles and rails of 25mm. thick, 75mm wide in two
9.51 halves with panels of 20mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-18.2 : Providing and fixing in position Honne wood fully panelled
shutters for windows with styles and rails of 25mm. thick, 75mm wide in two
9.52 halves with panels of 20mm thick including cost of materials, labour charges, Sqm
HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34
KSRB 9-18.3 : Providing and fixing in position Mathi/ Nandi wood fully
panelled shutters for windows with styles and rails of 25mm. thick, 75mm
9.53 wide in two halves with panels of 20mm thick including cost of materials, Sqm
labour charges, HOM of machineries complete as per specifications.
(excluding cost of fixtures ) Specification No. KBS 9.34
KSRB 9-18.4 : Providing and fixing in position fully panelled shutters for
windows with Honne wood styles and rails of 25mm. thick, 75mm wide in
two halves with panels provided with NUWUD ( MDF ) of 18mm thick
9.54 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34,
9.26.3
KSRB 9-18.5 : Providing and fixing in position fully panelled shutters for
windows with Honne wood styles and rails of 25mm. thick, 75mm wide in
two halves with panels provided with NUWUD ( MDF ) of 12mm thick
9.55 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34,
9.26.3
KSRB 9-19.1 : Providing and fixing in position Teak wood half panelled
shutters at bottom and half glazed at top for window shutters with styles and
rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including
cost of materials, labour charges, HOM of machineries complete as per
specifications. ( excluding cost of fixtures) Specification No. Providing and
fixing in position Teak wood half panelled shutters at bottom and half glazed
9.56 Sqm
at top for window shutters with styles and rails of 35mm. thick, 75mm wide in
two halves with panels of 25mm thick, 3mm thick reeded glass for top panels
fixed with wooden beading including cost of materials, labour charges, HOM
of machineries complete as per specifications. ( excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
KSRB 9-19.2 :Providing and fixing in position Honne wood half panelled
shutters at bottom and half glazed at top for window shutters with styles and
rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including
cost of materials, labour charges, HOM of machineries complete as per
specifications. ( excluding cost of fixtures) Specification No. Providing and
fixing in position Teak wood half panelled shutters at bottom and half glazed
9.57 Sqm
at top for window shutters with styles and rails of 35mm. thick, 75mm wide in
two halves with panels of 25mm thick, 3mm thick reeded glass for top panels
fixed with wooden beading including cost of materials, labour charges, HOM
of machineries complete as per specifications. ( excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
KSRB 9-19.3 :Providing and fixing in position Mathi/ Nandi wood half
panelled shutters at bottom and half glazed at top for window shutters with
styles and rails of 35mm. thick, 75mm wide in two halves with panels of
25mm thick, 3mm thick reeded glass for top panels fixed with wooden
beading including cost of materials, labour charges, HOM of machineries
complete as per specifications. ( excluding cost of fixtures) Specification No.
Providing and fixing in position Teak wood half panelled shutters at bottom
9.58 and half glazed at top for window shutters with styles and rails of 35mm. Sqm
thick, 75mm wide in two halves with panels of 25mm thick, 3mm thick reeded
glass for top panels fixed with wooden beading including cost of materials,
labour charges, HOM of machineries complete as per specifications.
( excluding cost of fixtures) Specification No. KBS 9.34, 9.42
KSRB 9-19.4 :Providing and fixing in position windows half paneled shutters
at bottom and half glazed at top for window shutters with Honne wood styles
and rails of 35mm. thick, 75mm wide in two halves with panels filled with
NUWUD ( MDF ) of 18mm thick, 3mm thick reeded glass for top panels
9.59 Sqm
fixed with wooden beading including cost of materials, labour charges, HOM
of machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42, 9.26.3
KSRB 9-20.1 : Providing and fixing in position Teak wood half panelled
shutters at bottom and half glazed at top for window shutters with styles and
rails of 30mm. thick, 75mm wide in two halves with panels of 20mm thick,
9.60 3mm thick reeded glass for top panels fixed with wooden beading including Sqm
cost of materials, labour charges, HOM of machineries complete as per
specifications. (excluding cost of fixtures) Specification No. KBS 9.34, 9.42
KSRB 9-20.2 : Providing and fixing in position Honne wood half panelled
shutters at bottom and half glazed at top for window shutters with styles and
rails of 30mm. thick, 75mm wide in two halves with panels of 20mm thick,
9.61 3mm thick reeded glass for top panels fixed with wooden beading including Sqm
cost of materials, labour charges, HOM of machineries complete as per
specifications. (excluding cost of fixtures) Specification No. KBS 9.34, 9.42
KSRB 9-20.3 : Providing and fixing in position Mathi/ Nandi wood half
panelled shutters at bottom and half glazed at top for window shutters with
styles and rails of 30mm. thick, 75mm wide in two halves with panels of
20mm thick, 3mm thick reeded glass for top panels fixed with wooden
9.62 Sqm
beading including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures) Specification No.
KBS 9.34, 9.42
KSRB 9-20.4 : Providing and fixing in position windows half paneled shutters
at bottom and half glazed at top for window shutters with Honne wood styles
and rails of 30mm. thick, 75mm wide in two halves with panels filled with
NUWUD (MDF ) of 18mm thick, 3mm thick reeded glass for top panels fixed
9.63 Sqm
with woodenbeading including cost of materials, labour charges, HOM of
machineries completeas per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34,9.42, 9.26.3
KSRB 9-21.4 : Providing and fixing in position windows half paneled shutters
at bottom and half glazed at top for window shutters with Honne wood styles
and rails of 25mm. thick, 75mm wide in two halves with panels filled with
NUWUD ( MDF ) of 18mm thick, 3mm thick reeded glass for top panels
9.67 Sqm
fixed with wooden beading including cost of materials, labour charges, HOM
of machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42, 9.26.3
KSRB 9-22.1 : Providing and fixing in position fully glazed for windows
shutters with Teak wood styles and rails of 35mm. thick 75mm wide in single
shutters with 4mm thick plain glass fixed with wooden beading including cost
9.68 of materials, labour charges, HOM of machineries complete as per Sqm
specifications. (excluding cost of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-22.2 : Providing and fixing in position fully glazed for windows
shutters with Honne wood styles and rails of 35mm. thick 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
9.69 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34,
9.42
KSRB 9-23.1 : Providing and fixing in position fully glazed for windows
shutters with Teak wood styles and rails of 30mm. thick, 75mm wide in single
shutters with 4mm thick plain glass fixed with wooden beading including cost
9.70 of materials, labour charges, HOM of machineries complete as per Sqm
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-23.2 :Providing and fixing in position fully glazed for windows
shutters with Honne wood styles and rails of 30mm. thick, 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
9.71 including cost of materials, labour charges, HOM of machineries complete as Sqm
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34,
9.42
KSRB 9-24.1 : Providing and fixing in position fully glazed for windows
shutters with Teak wood styles and rails of 25mm. thick, 75mm wide in single
shutters with 4mm thick plain glass fixed with wooden beading including cost
9.72 of materials,labour charges, HOM of machineries complete as per Sqm
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42
KSRB 9-24.2 : Providing and fixing in position fully glazed for windows
shutters with Honne wood styles and rails of 25mm. thick, 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
9.73 including cost of materials,labour charges, HOM of machineries complete as Sqm
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34,
9.42
KSRB 9-25.1 :Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Teak wood styles and rails of
30mm. thick, 50mm wide and central divider of 30mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 10mm wide flushed to the
9.74 Sqm
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
KSRB 9-25.2 :Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Honne wood styles and rails of
30mm. thick, 50mm wide and central divider of 30mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 10mm wide flushed to the
9.75 Sqm
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
KSRB 9-25.3 : Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Mathi/ Nandi wood styles and
rails of 30mm. thick, 50mm wide and central divider of 30mm. wide, 3mm
thick reeded glass fixed with wooden beading of size 10mm wide flushed to
9.76 Sqm
the thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
KSRB 9-26.1 : Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Teak wood styles and rails of
25mm. thick, 50mm wide and central divider of 25mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 10mm wide flushed to the
9.77 Sqm
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
KSRB 9-26.2 : Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Honne wood styles and rails of
25mm. thick, 50mm wide and central divider of 25mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 10mm wide flushed to the
9.78 Sqm
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
KSRB 9-26.3 : Providing and fixing in position fully glazed shutters for
ventilators side hung or central pivoted with Mathi/ Nandi wood styles and
rails of 25mm. thick, 50mm wide and central divider of 25mm. wide, 3mm
thick reeded glass fixed with wooden beading of size 10mm wide flushed to
9.79 Sqm
the thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
SOLID PVC DOOR FRAME Providing & fixing factory made PVC Door
frame of size 50x47mm with a wall thickness of 5mm, made out of extruded
5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm
long brackets of 15x15mm M.S Square tube, the entire door frame to be
9.84 Sqm
reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be
fixed to the wall using M.S. Screws of 65/80mm size complete as per
manufacturers specification & direction of Engineer-in-charge.
SOLID PANEL PRELAM PVC DOOR SHUTTER Providing & fixing 30mm
thick factory made rigid foam Prelam Panelled Door Shutters made from M.S.
tube of 19x19mm, 19 gauge for styles and 15x15mm for top & bottom rails,
covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet
& 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated
PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick,
20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling
9.85.1 of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sqm
Sealed to the styles & rails with PVC Designer beading on either side &
joined together with solvent cement adhesive etc., Complete as per
manufacturers specification & direction of Engineer-in-charge fixed to frames
with 3 nos of 75mm. Aluminium hinges. with both side prelam
SOLID PANEL PRELAM PVC DOOR SHUTTER Providing & fixing 30mm
thick factory made rigid foam Prelam Panelled Door Shutters made from M.S.
tube of 19x19mm, 19 gauge for styles and 15x15mm for top & bottom rails,
covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet
& 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated
PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick,
20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling
9.85.2 of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sqm
Sealed to the styles & rails with PVC Designer beading on either side &
joined together with solvent cement adhesive etc., Complete as per
manufacturers specification & direction of Engineer-in-charge fixed to frames
with 3 nos of 75mm. Aluminium hinges. with one side prelam
Supply and fixing of door shutters made of rigid PVC extruded hollow section
(Nandi or equivalent) of 20mmx200mm with the wall thickness of 1.0mm+/-
0.1mm equally divided into 4nos with tongue an groove locking arrangements.
The shutter frame is made of 30mm x 79mm with the wall thickness of
1.5mm+/-0.15mm section metric cut and joined at 4 corners with
9.87 125mmx225mm plastic brackets. The shutter shall be horizontally reinforced Sqm
with 2nos of 8mm PVC rods. Teak wood battons shall be reinforced inside the
door shutter during the fabrication of the door shutter at those points wherever
the hardware is fixed on to the door shutter.
Supply and fixing of door frame made of hollow extruded PVC Section
(Nandi or Equivalent) having dimension of 40x57mm with the wall thickness
9.88 of 2mm+/-0.2mm duly reinforced with seasoned wood plank at the hinges M
side. The door frame top 2corners shall be metric cut/ welded.
Supply and fixing of door frame made of hollow extruded PVC Section
(Nandi or Equivalent) having dimension of 40x46mm with the wall thickness
9.89 of 2mm+/-0.2mm duly reinforced with seasoned wood plank at the hinges M
side. The door frame top 2 corners shall be metric cut/ weilded .
Providing and fixing factory made splendoor of solid core single leaf rigid
composite polymer laminated sal wood, door shutter of required thickness,
manufactured out of solid core door conforming to IS 2202 (Part-1) 1991,
laminated with 0.8 mm thick polymer, termite, water resistant and fire
retardant with superior gluing based on vacuum lamination technology and
with various pre moulded design on both faces conforming to IS 6307-1985,
using adhesive conforming to IS 4835-1979 and door shuters tested in
9.90.1 Sqm
conformation to IS 4020-1994. The finish of shutters will be
TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs
WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and
inclusive of supply of shutters to respective work spot. with door shutter
30mm thick
Providing and fixing factory made splendoor of solid core single leaf rigid
composite polymer laminated sal wood, door shutter of required thickness,
manufactured out of solid core door conforming to IS 2202 (Part-1) 1991,
laminated with 0.8 mm thick polymer, termite, water resistant and fire
retardant with superior gluing based on vacuum lamination technology and
with various pre moulded design on both faces conforming to IS 6307-1985,
using adhesive conforming to IS 4835-1979 and door shuters tested in
9.90.2 Sqm
conformation to IS 4020-1994. The finish of shutters will be
TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs
WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and
inclusive of supply of shutters to respective work spot. with door shutter
35mm thick
Providing and fixind of factory made 30mm P.V.C rigid foam PANEL
DOORS made from MS tube of 19 guage, size of 19mm x 19mm and covered
with heat moulded PVC C Channel of 5 mm thick and width of 50mm to form
styles and rails. The inner panel should be inserted in between the frame with
9.91 5mm thick PVC rigid foam sheet, welded/sealed to the styles and rails along Sqm
with 5mm PVC, beeding on all and either sides. The vertical tubes may be
filled with suitable wood material to further enhance the screw holding
capacity
Providing and fixing PVC Hollow Door Frame of the size 50x47mm with a
wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet,
mitre cut at two corners and joined with 2 Nos. of 15Dmm long brackets of
15x15mm M.S. Square tube. The two vertical door profiles are to be
reinforced with 19x19 mm M.S. Square tube of 19 gauge, EPDM rubber
9.92 gasket weather seal to be provided through out the frame. The door screws M
through the frame by using PVC fasteners. A minimum of 4 Nos of screws to
be provided for each vertical member & minimum 2 Nos. for horizontal
member
Providing and fixing factory made single leaf! rigid GRP Sandwich composite
door shutter of 32mm thick, laminated with two GRP skins with wood grain
finish, fabricated using U.V-stabilized lsopthalic Gelcoat and on layer of 45
gsm E-Giass Chopped strand Mat (CSM), impregnated with orthopthalic
polyster resin. The thickness of the skins shall not be less than 1.5mm.
Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a
density of 20 Kg/m3 shall be used as core material. Wooden reinforcements
made of Seasoned Salwood block of cross section not less than 28mmx32mm
and also necessary salwood reinforcements for fixing the metal fittings such as
9.93 tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive Sqm
compatible with EPS foam shall be used for bonding the core material, the
Salwood reinforcement and the skins. The material and process for
manufacturing the door shutters shall confirm to Standards and specifications
and the door shutters tested in confiramation to IS 4020-1994. The finish of
shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour
using high quality pigments. Exclusing cost of fixtures and inclusive of supply
of shutters to respective work spot
Providing and fixing factory made single leaf rigid GRP Sandwich composite
door shutter of 40 mm thick, laminated with two GRP skins with wood grain
finish, fabricated using UV-stabilized lsopthalic Gelcoat and one layer of 450
gns E-Giass Chopped Strand Mat (CSM), impregnated with orthopthalic
polyester resin. The thickness of the skins shall not be less than 1.5mm.
Expanded Polystyrene (EPS) structural foam panel of 37mm thickness and a
density of 20 Kg/m3 shall be used as core material. Wooden reinforcements
made of Seasoned Salwood block of cross section not lessthan
36mmx32mmand also necessary salwood reinforcements for fixing the metal
9.94 fittings such as tower bolts, aldrops, handles, etc. shall be provided. A Sqm
structural adhesive compatible with EPS foam shall be used for bonding the
core material, the salwood reinforement and the skins. The material and
process for manufacturing the door shutters shall confirm to Standards and
specifications and the door shutters tested in confiramation to IS 4020-1994.
The finish of shutter will be plain coulur White/IVORY/Beige/Light Grey or
any other colour using high quality pigments. Excluding cost of fixtures and
inclusive of supply of shutters to respective work spot
Providing and fixing mosquito mesh to mesh to windows with 7.5 mm to 1.25
9.99 Sqm
mm thick Honne wood petties including labour charges etc., complete.
Providing and fixing require line and slope roofing with semi-corrugated PVC
roofing sheets of industrial profile 250/40 in 2.00 mm thick white colour, fire
9.100 and heat resistant having width of 1.054 mtrs. fixed with self tapping screws Sqm
with washers, over the existing purlins, rafters and trusses including cost of
materials, labour, complete as per specification.
Providng and fixng Teak Wood Hand railing to stair case using bulusters of
sections 40mm x 25mm as per design drawing No: 11863 / railings issued by
the Principal Chief Architect and fixing it to the steps using anchor bolts and
necessary adhesive materiasl and fixing T.W.handrail of section 75 x 75 mm
to bulusters and finishing the same by using colourless polish etc., complete.
9.101 The work includes cost of all materials, labour charges for all items of work, RMt
hire charges for welding, cutting and grinding equipment, and electricity
charges, with lead and lift, loading and unloading charges, etc., complete as
per drawing and specification
Providing & Fixing Mosquito mesh shutters made out of Stainless Steel
mosquito proof mesh with 95% & above visibility which is fixed to the
powder coated aluminium frame 32mm thick of approved shade. The work
9.103 including fixing the shutters with necessary accessories, to complete as per Sqm
specification including the labour charges for fixing the shutter to the existing
frames.
Providing & Fixing Mosquito mesh shutters made out of Stainless Steel
mosquito proof mesh with 95% & above visibility which is fixed to the
powder coated aluminium frame 20mm thick of approved shade. The work
9.104 including fixing the shutters with necessary accessories, to complete as per Sqm
specification including the labour charges for fixing the shutter to the existing
frames.
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.1 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 30mm thick both side teak
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.2 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 30mm thick one side teak and one side commercial
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.3 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 30mm thick both side commercial
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.4 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 35mm thick both side teak
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.5 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 35mm thick one side teak and one side commercial
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.6 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 35mm thick both side commercial
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.7 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 40mm thick both side teak
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.8 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 40mm thick one side teak and one side commercial
Providing and fixing flush door shutter made out of solid core black board
type, well seasoned chemically treated hard wood battens and internal frame
with minimum 45 mm wide wooden frame all-round door shutters covered
with cross bonded wooden sheets (core veneer) hot pressed and fastened on
9.106.9 Sqm
both sides of the door using liquid phenol formaldehyde resin as per IS
specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per
specification. - 40mm thick both side commercial
Providing and fixing to the existing door frames, factory made single leaf
9.107 Sqm
HDF
Providing and fixing to the existing door frames, factory made single leaf
HDF skin sandwich composite door shutter of 40 mm thickness made out of
honeycomb of 34 mm thick and surrounded by good quality properly seasoned
wooden reinforcements of size 33 mm X 65 mm for fixing fixtures such as
tower bolts, aldrops, handles etc., and laminated on either sides with 3 mm
thick wood grain finish good quality HDF skins, using structural bonding
material compatible with honeycomb core, wood and HDF skin and the whole
assembly is bonded together at high temperature and pressure using 650
tonnage heated compression moulding press. The HDF Composite door
9.108 surface is coated with 2 coats of high quality primer.The front and back Sqm
surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for
manufacturing the door shall confirm to RV-TIFAC composites design centre
standards and specification and the door shutters tested in confirmation to
IS4020-1994, including cost of all materials, labour charges, HOM and
machineries etc. complete but excluding the cost of fixtures.
Providing and fixing to the existing door frames, factory made single leaf
9.109 Sqm
HDF
Providing and fixing to the existing door frames, factory made single leaf
HDF skin sandwich composite door shutter of 32 mm thickness made out of
honeycomb of 26 mm thick and surrounded by good quality properly seasoned
wooden reinforcements of size 25 mm X 65 mm for fixing fixtures such as
tower bolts, aldrops, handles etc., and laminated on either sides with 3 mm
thick wood grain finish good quality HDF skins, using structural bonding
material compatible with honeycomb core, wood and HDF skin and the whole
assembly is bonded together at high temperature and pressure using 650
tonnage heated compression moulding press. The HDF Composite door
9.110 surface is coated with 2 coats of high quality primer.The front and back Sqm
surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for
manufacturing the door shall confirm to RV-TIFAC composites design centre
standards and specification and the door shutters tested in confirmation to
IS4020-1994, including cost of all materials, labour charges, HOM and
machineries etc. complete but excluding the cost of fixtures.
Providing and fixing to the existing door frames, factory made single leaf
HDF skin sandwich composite door shutter of 32 mm thickness made out of
honeycomb of 26 mm thick and surrounded by good quality properly seasoned
wooden reinforcements of size 25 mm x 65 mm for fixing fixtures such as
tower bolts, aldrops, handles etc., and laminated on either sides with 3 mm
thick wood grain finish good quality HDF skins, using structural bonding
material compatible with honeycomb core, wood and HDF skin and the whole
assembly is bonded together at high temperature and pressure using 650
tonnage heated compression moulding press. The HDF Composite door
9.111 surface is coated with 2 coats of high quality primer.The front and back Sqm
surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for
manufacturing the door shall confirm to RV-TIFAC composites design centre
standards and specification and the door shutters tested in confirmation to
IS4020-1994, including cost of all materials, labour charges, HOM and
machineries etc. complete but excluding the cost of fixtures.
Water Proofing
Item Code Item Description Unit
KSRB 10-2 : Providing and laying in position yelahanka tiles of size 250 x
250mm of approved quality and make, over a bed of cement mortar 1:3 an
10.1 average thickness 25mm over weather proof course and pointed with cement Sqm
mortar 1:3 mix with red oxide including curing cost of materials, labour
complete as per specifications. Specification No. KBS
KSRB 10-3 : Providing and laying integral cement based waterproofing
treatment including preparation of surface as required for treatment of roofs,
balconies, terraces etc., consisting of following application. (a) Applying and
grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed
with proprietary water proofing compound conforming to IS:2645 over the
RCC slab after cleaning the surface before treatment. (b) Laying cement
concrete using broken brick bats 25mm to 100mm size with 50% of cement
mortar 1:5 admixed with proprietary water proofing compound conforming
IS:2645 over 20mm thick layer of cement mortar 1:5 admixed with
10.2 proprietary water proofing compound to required slope and treating similarly Sqm
the adjoining walls upto 300mm height including rounding off junctions of
walls and slabs. (c) After two days of proper curing, applying a second coat of
cement lurry admixed with proprietary water proofing compound (d)
Finishing the surface with 20mm thick jointless cement mortar of mix 1:4
admixed with proprietary water proofing compound and finally finishing the
surface with trowel and neat cement slurry and making of 300x300mm square.
(e) The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test including cost of materials,
labour complete as per specifications.
KSRB 10-4 : Providing and laying four courses water proofing treatment with
bitumen felt over roof consisting of first and third courses of blown and / or
residual bitumen applied hot at 1.45 kg / sqm of area for each course second
course of roofing felt Type - 3 grade-I ( hessian based self finish bitumen felt )
and forth and final course of stone grit 6mm and down size or pea sized gravel
10.3 spread at 0.06 cum. / sqm including preparation of surface but excluding Sqm
grading complete with bitumen felt ( hessian based ) Type - 3 grade-I blown
or / and residual bitumen applied hot 1.4 kg / sqm including cost of materials,
labour complete as per specifications. KBS 10.4.3
KSRB 10-5 : Providing and laying six courses water proofing treatment with
bitumen felt over roof consisting of first, third and fifth courses of blown and /
or residual bitumen applied hot at 1.45 kg, 1.2kg and 1.7kg / sqm of area
respectively, second and fourth courses of roofing felt Type -2 grade-I ( fibre
10.4 based self finish bitumen felt ) and sixth and final course of stone grit 6mm Sqm
and down size or pea sized gravel spread at 0.06 cum. / sqm including
preparation of surface, excluding grading but including cost of materials,
labour complete as per specifications. KBS 10.4.3
Waterproofing of RCC Terrace / podium slab / toilet / utilities / water
retaining structure by preparing the surface by chipping and cleaning and
Grouting of Honey comb, voids,cracks / construction joints with cement slurry
(1kg cement added in 10 ltr of water) added with 100gm of inorganic
accelerator, followed by spraying of liquid biological modified alkaline earth
silicates @ 0.40 ltr per sqm on whole surface to reduce the micro porosity and
allowing it to dry, curing the surface for the silicates to penetrate deeper into
10.5.1 Sqm
the concrete and spraying waterproofing impregnate liquid containing silane
and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymer
slurry made out of cross linked acrylic / styrene / butadiene & cement in the
ratio of 1:0.1, @0.50kg/sqm on the whole surface, including all labour charges
tools and equipments, all complete as per the specification
Bore Packing : filling the bore wherever necessary with polymer modified
concrete and brushing one coat of acrylic copolymer cross linked formulation
10.5.2 on the bore. including all labour charges tools and equipments, all complete as Sqm
per the manufacturer
Extra for water proofing the inside surface of tanks (OHT & UGT) - applying
of modified polymers soft acrylic esters coat @0.40 kg/sqm in 2 coats
10.5.3 including all labour charges tools and equipments, all complete as per the Sqm
specification.
Providing and fixing food grade epoxy painting to over head tank and sump
10.6 tank after cleaning and drying including pumping and bailing out of water, Sqm
including cost of all materials labour lead and lifts etc., complete
Cleaning RCCsump tanks and RCC overhead tanks with mechanical
dewatering including removal of sludge, mud, dirt, algea etc and cleanuing the
wall surface of tanks using high pressure jet, vacuum cleaning and spraying
anti bacterial treatment to the wall and ceiling surfaces and UV treatment,
10.7 including removing of sludge etc., using suitable coconut broomstick, L
squeesers / wipers / rubber brushes, coir brushes, plastic buckets, mugs,
dewatering using motor with portal arrangement, hose pipe etc., complete
including all safety measures.
Providing and applying Polymer based instant running water leak arrester in
civil works using mixture capable of withstanding a temperature of 200 Deg C
comprising of Portland cement, Lime stone, Silica sand, Alumina cement,
Sodium aluminate, Calcium oxide in the form of powder composition of
10.10 1.00kg mixed with 250ml water, applied on a cleaned surface free of loose Kg
materials, dust etc., for cavities and also for damaged areas in all masonry and
concrete structures, for rapid hardening and leak arresting including cost of all
materials, labour charges, HOM and machineries etc., complete.
Providing and applying water proofing in two coats of 300 microns thickness
on all surfaces like concrete, Metal, Plastic , Asbestos, Wood, Cloth canopy
using Heat refractive compound made out of Vinyl Acetate copolymer latex,
Water, Titanium Dioxide, Barium metaborate, Ceramic Microsphere powder,
10.11 Mica, Propylene Glycol in suitable proportions and the surface to be treated Sqm
should be cleared of loose particles/dust/fungus etc and kept dry before the
application of heat refractive compound, including cost of all materials, labour
charges, HOM and machineries etc., complete.
Drainage Work
Item Code Item Description Unit
KSRB 12-1.1 : Providing and laying in position to required level or slope
100mm internal diameter salt glazed stoneware pipes grade A and jointing
11.1 with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and M
joints,including cost of materials, labour charges complete as per
specifications. Specification No. KBS 12.2.5 / 12.7
KSRB 12-2.2 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 150mm internal
11.11 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2
KSRB 12-2.3 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
11.12 layers not exceeding 15 cms thick, well compacted, for 200mm internal M
diameter stoneware pipes including cost of materials, labour charges, HOM of
machinery, curing
KSRB 12-2.4 :Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
11.13 layers not exceeding 15 cms thick, well compacted, for 230mm internal M
diameter stoneware pipes including cost of materials, labour charges, HOM of
machinery, curing
KSRB 12-2.5 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 250mm internal
11.14 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2
KSRB 12-2.6 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 300mm internal
11.15 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2 300mm
KSRB 12-2.7 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 350mm internal
11.16 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2
KSRB 12-2.8 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 400mm internal
11.17 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2
KSRB 12-2.9 : Providing and laying in position plain cement concrete M7.5
40mm and down size graded granite metal, machine mixed concrete laid in
layers not exceeding 15 cms thick, well compacted, for 450mm internal
11.18 diameter stoneware pipes including cost of materials, labour charges, HOM of M
machinery, curing complete as per specifications Specification No. KBS 4.1 /
4.2
KSRB 12-3.1 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
100mm internal diameter stoneware pipes, concrete machine mixed laid in
11.19 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.2 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
150mm internal diameter stoneware pipes, concrete machine mixed laid in
11.20 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.3 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
200mm internal diameter stoneware pipes, concrete machine mixed laid in
11.21 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.4 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
230mm internal diameter stoneware pipes, concrete machine mixed laid in
11.22 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.5 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
250mm internal diameter stoneware pipes, concrete machine mixed laid in
11.23 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.6 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
300mm internal diameter stoneware pipes, concrete machine mixed laid in
11.24 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.7 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
350mm internal diameter stoneware pipes, concrete machine mixed laid in
11.25 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.8 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
400mm internal diameter stoneware pipes, concrete machine mixed laid in
11.26 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-3.9 : Providing and laying in position plain cement concrete of mix
M 7.5 using 40mm and down size graded granite / trap metal for haunching of
450mm internal diameter stoneware pipes, concrete machine mixed laid in
11.27 layers not exceeding 15 cms thick, well compacted, including cost of M
materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
KSRB 12-6.1 : Providing 20mm square M.S footrest and fixing in manhole
with M 10 cement concrete block of 20x20x10cms, using 20mm and down
11.44 size metal of size including cost of materials, labour charges, curing complete Nos
as per specifications. Specification No. KBS 12.4.6
KSRB 12-6.2 : Providing 20mm round M.S footrest and fixing in manhole
with M 10 cement concrete block of 20x20x10cms, using 20mm and down
11.45 size metal of size including cost of materials, labour charges, curing complete Nos
as per specifications. Specification No. KBS 12.4.6
KSRB 12-6.3 : Providing cast iron footrest and fixing in manhole with M 10
cement concrete block of 20x20x10cms, using 20mm and down size metal of
11.46 size including cost of materials, labour charges, curing complete as per Nos
specifications. Specification No. KBS 12.4.6
KSRB 12-7.1 : Making connection of drain or sewer line of size 100 to
230mm external dia with existing manhole including breaking into and
making good the walls, floors with cement concrete M 15 with 20mm and
downsize granite metal, cement plastered on both sides of mix 1:3, finished
11.47 Nos
with a floating coat of neat cement, and making necessary channels for the
drain, including cost of materials, labour charges, curing complete as per
specifications. Specification No. KBS
KSRB 12-8.1.1 : Extra for item no. KSRB 12-8.1 depth beyond 450mm and
brick masonry chamber with table moulded non modular bricks of class
11.51 designation 50 in cement mortar 1:5 for every 150mm depth or part thereof Each
including cost of materials, labour charges, curing complete as per
specifications. Specification No. KBS
KSRB 12-8.2.1 : Extra for item no. KSRB 12-8.2 depth beyond 450mm and
brick masonry chamber with table moulded non-modular bricks of class
11.53 designation 50 in cement mortar 1:5 for every 150mm depth or part thereof Each
including cost of materials, labour charges, curing complete as per
specifications. Specification No. KBS
KSRB 12-8.3 : Constructing brick masonry inspection chamber 600x850mm,
and 450mm depth, ( clear inside dimension ) for pipeline with three or more
inlets, using table moulded non-modular bricks of class designation 50 in
cement mortar 1:5, C.I cover with frame (light duty) 455x610mm internal
dimensions, total weight of cover with frame to be not less than 38 kg ( weight
of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with cement
concrete M 15 with 20mm and downsize granite metal , foundation concrete
11.54 Each
M 5 with 40mm and downsize granite metal inside plastering 12mm thick
with cement mortar 1:3, finished smooth with a floating coat of cement on
walls and bed concrete complete as per standard design including cost of
materials, labour charges, curing complete as per specifications. Specification
No. KBS
KSRB 12-8.3.1 : Extra for item no. KSRB12-8.3 depth beyond 450mm and
brick masonry chamber with table moulded non-modular bricks of class
11.55 designation 50 in cement mortar 1:5 for every 150mm depth or part thereof Each
including cost of materials, labour charges, curing complete as per
specifications. Specification No. KBS
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.1 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials, with 90mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.2 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 110mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.3 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 140mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.4 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 160mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.5 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 200mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.6 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 225mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.7 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 250mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.8 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 280mm outer dia
Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00
kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe
11.56.9 fittings, wall clips, making good the wall, ceiling and floor, including cost of M
all materials,with 315mm outer dia
Sanitary Work
Item Code Item Description Unit
KSRB 11-1 : Providing and fixing white vitreous china clay, water closet
Indian type ( Squatting pan ) of size 580mm with footrests, 100mm S or P
trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with
fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps,
12.1 overflow arrangements with specials and 25mm mosquito proof coupling of pan
approved design, painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11
KSRB 11-2 : Providing and fixing white vitreous china clay, water closet
Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P
trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with
fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps,
12.2 overflow arrangements with special and 25mm mosquito proof coupling of pan
approved design, painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11
KSRB 11-3 : Providing and fixing white vitreous china clay, water closet
Indian type ( Squatting pan ) of size 580mm with footrests, 100mm S or P
12.3 trap, (approved make) cutting and making good the wall and floor wherever pan
required, including cost of materials, labour complete as per specifications.
KSRB 11-4 : Providing and fixing white vitreous china clay, water closet
Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P
12.4 trap, (approved make ) cutting and making good the wall and floor wherever pan
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-5 : Providing and fixing white vitreous china clay, water closet
European type ( Pedestal type, P-trap ) with black solid plastic seat and lid,
C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all
are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush
bend with fittings and clamps, overflow arrangements with special and 25mm
12.5 mosquito proof coupling of approved design, painting of fittings and brackets, Each
cutting and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications. Specification No. KBS 11
KSRB 11-6 : Providing and fixing white vitreous china clay, water closet
European type ( Pedestal type, S-trap ) with black solid plastic seat and lid,
C.P brass hinges, rubber buffers. 10 litre white glazed / vitreous china clay
low level, flushing cistern ( all are approved make ) with fittings, C.I / M.S
brackets, 40mm diameter flush bend with fittings and clamps, overflow
12.6 arrangements with specials and 25mm mosquito proof coupling of approved Each
design, painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11
KSRB 11-7.1 : Providing and fixing white vitreous china clay, flat back,
lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps complete painting of fittings and
12.7 Unit
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-7.2 : Providing and fixing white vitreous china clay, flat back,
lipped front urinal basin of 430x260x350mm in the range of two 7.5 litre
P.V.C with automatic flushing cistern, C.I / M.S brackets, standard flush pipe
and C.P. brass spreaders with brass unions and G.I. clamps painting of fittings
12.8 Unit
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-7.3 : Providing and fixing white vitreous china clay, flat back,
lipped front urinal basin of 430x260x350mm in the range of three with 7.5
litres PVC automatic flushing cistern, C.I / M.S brackets, standard flush pipe
and C.P. brass spreaders with brass unions and G.I. clamps painting of fittings
12.9 Unit
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-7.4 : Providing and fixing white vitreous china clay, flat back,
lipped front urinal basin of 430x260x350mm in the range of four with 10 litres
PVC automatic flushing cistern, C.I / M.S brackets, standard flush pipe and
C.P. brass spreaders with brass unions and G.I. clamps complete painting of
12.10 Unit
fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-8.1 : Providing and fixing white vitreous china clay, wall corner
type, lipped front urinal basin of size 340x410x265mm with 5 litres P.V.C
automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P.
brass spreaders with brass unions and G.I. clamps complete painting of fittings
12.11 Unit
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-8.2 : Providing and fixing white vitreous china clay, wall corner
type, lipped front urinal basin of size 340x410x265mm in the range of two
with 7.5 litre P.V.C automatic flushing cistern, C.I / M.S brackets, standard
flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting
12.12 Unit
of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-8.3 : Providing and fixing white vitreous china clay, wall corner
type, lipped front urinal basin of size 340x410x265mm in the range of three
with 7.5 litre P.V.C automatic flushing cistern, C.I / M.S brackets, standard
flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting
12.13 Unit
of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-8.4 : Providing and fixing white vitreous china clay, wall corner
type, lipped front urinal basin of size 340x410x265mm in the range of four
with 10 litre P.V.C automatic flushing cistern, C.I / M.S brackets, standard
flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting
12.14 Unit
of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-9.1 : Providing and fixing white vitreous china clay, flat back or
half stall urinal basin of size 580x380x350mm with 5 litres P.V.C automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps C.I dtrap with outlet grating and
12.15 Unit
other couplings in C.P brass, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
KSRB 11-9.2 : Providing and fixing white vitreous china clay, flat back or
half stall urinal basin of size 580x380x350mm in the range of two with 7.5
litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe
and C.P. brass spreaders with brass unions and G.I. clamps, C.I. trap with
12.16 outlet grating and other couplings in C.P brass painting of fittings and Unit
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-9.3 : Providing and fixing white vitreous china clay, flat back or
half stall urinal basin of size 580x380x350mm in the range of three with 10
litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe
and C.P. brass spreaders with brass unions and G.I. clamps, C.I. trap with
12.17 outlet grating and other couplings in C.P brass painting of fittings and Unit
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-9.4 : Providing and fixing white vitreous china clay, flat back or
half stall urinal basin of size 580x380x350mm in the range of four with 10
litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe
and C.P. brass spreaders with brass unions and G.I. clamps, C.I. trap with
12.18 outlet grating and other couplings in C.P brass painting of fittings and Unit
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-10.1 : Providing and fixing white vitreous china clay, squatting
plate with 5 litre P.V.C automatic flushing cistern including brass coupling C.I
/ M.S brackets, G.I flush pipe of standard size and C.P. brass spreaders
12.19 painting of fittings and brackets, cutting and making good the wall and floor Unit
wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11
KSRB 11-10.2 : Providing and fixing white vitreous china clay, squatting
plate in the range of two single squatting plate with 7.5 litre P.V.C automatic
flushing cistern including brass coupling C.I / M.S brackets, G.I flush pipe of
standard size and C.P. brass spreaders painting of fittings and brackets, cutting
12.20 Unit
and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. Specification No. KBS 11
KSRB 11-10.3 : Providing and fixing white vitreous china clay, squatting
plate in the range of three single squatting plates with 10 litre P.V.C automatic
flushing cistern including brass coupling C.I / M.S brackets, G.I flush pipe of
standard size and C.P. brass spreaders painting of fittings and brackets, cutting
12.21 Unit
and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. Specification No. KBS 11
KSRB 11-10.4 : Providing and fixing white vitreous china clay, squatting
plate in the range of four single squatting plates with one number 15 litre
P.V.C automatic flushing cistern including brass coupling C.I / M.S brackets,
G.I flush pipe of standard size and C.P. brass spreaders painting of fittings and
12.22 Unit
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back
wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.23 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.2 : Providing and fixing white vitreous china clay, flat back
wash basin size 630x450mm with a single 15mm C.P brass pillar tap with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.24 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.3 : Providing and fixing white vitreous china clay, flat back
wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.25 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.4 : Providing and fixing white vitreous china clay, flat back
wash basin size 550x400mm with a single 15mm C.P brass pillar tap with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.26 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back
wash basin size 450x300mm with a single 15mm C.P brass pillar tap with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.27 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.6 : Providing and fixing white vitreous china clay, angle back
wash basin size 600x480mm with a single 15mm C.P brass pillar tap with
12.28 C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of Unit
fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
KSRB 11-11.7 : Providing and fixing white vitreous china clay, angle back
wash basin size 400x400mm with a single 15mm C.P brass pillar tap with
C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of
12.29 fittings and brackets, cutting and making good the wall and floor wherever Unit
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
KSRB 11-11.8 : Providing and fixing white vitreous china clay, surgeon type
wash basin size 660x460mm with a pair of 15mm C.P brass pillar taps with
pair of elbow operated levers, C.I / M.S brackets, 32 mm C.P. brass waste of
12.30 standard pattern, painting of fittings and brackets, cutting and making good Unit
the wall and floor wherever required, including cost of materials, labour
complete as per specifications. KBS 11
KSRB 11-11.9 : Providing and fixing white vitreous china clay, surgeon type
wash basin size 660x460mm with single 15mm C.P brass pillar tap with single
elbow operated lever, C.I / M.S brackets, 32 mm C.P. brass waste of standard
12.31 pattern, painting of fittings and brackets, cutting and making good the wall Unit
and floor wherever required, including cost of materials, labour complete as
per specifications. KBS 11
KSRB 11-12.1 : Providing and fixing kitchen sink of white glazed fire clay of
size 600x450x250mm with M.S / C.I brackets, C.P brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
12.32 painting of fittings and brackets, cutting and making good the wall and floor Unit
wherever required, including cost of materials, labour complete as per
specifications. KBS 11
KSRB 11-12.2 : Providing and fixing kitchen sink of white glazed fire clay of
size 750x450x250mm with M.S / C.I brackets, C.P brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
12.33 painting of fittings and brackets, cutting and making good the wall and floor Unit
wherever required, including cost of materials, labour complete as per
specifications. KBS 11
KSRB 11-13.1 : Providing and fixing laboratory sink of white glazed fire clay
of size 600x450x200mm with M.S / C.I brackets, C.P brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
12.34 painting of fittings and brackets, cutting and making good the wall and floor Unit
wherever required, including cost of materials, labour complete as per
specifications. KBS 11
KSRB 11-13.2 : Providing and fixing laboratory sink of white glazed fire clay
of size 450x300x150mm with M.S / C.I brackets, C.P brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
12.35 painting of fittings and brackets, cutting and making good the wall and floor Unit
wherever required, including cost of materials, labour complete as per
specifications KBS 11
KSRB 11-14.1 : Providing and fixing stainless steel kitchen sink of size
510x1040mm bowl depth 178mm, with drain board, M.S / C.I brackets,
12.36 stainless steel plug 40 mm, painting of fittings and brackets, cutting and Unit
making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
KSRB 11-14.2 : Providing and fixing stainless steel kitchen sink of size
500x1000mm bowl depth 178mm, with drain board, M.S / C.I brackets,
12.37 stainless steel plug 40 mm, painting of fittings and brackets, cutting and Unit
making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
KSRB 11-14.3 : Providing and fixing stainless steel kitchen sink of size
400x915mm bowl depth 160mm, with drain board, M.S / C.I brackets,
12.38 stainless steel plug 40 mm, painting of fittings and brackets, cutting and Unit
making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
KSRB 11-18-7.2 : Providing and fixing sand cast iron soil waste single
unequal junction of required degree with access door 100x100x50mm,
12.66 insertion of rubber washers 3mm thick bolts and nuts, including cost of Each
materials, labour, testing complete as per specifications. Specification No.
KBS 11.1.10
KSRB 11-18-7.3 : Providing and fixing sand cast iron soil waste single
unequal junction of required degree with access door 75x75x50mm, insertion
12.67 of rubber washers 3mm thick bolts and nuts, including cost of materials, Each
labour, testing complete as per specifications Specification No. KBS 11.1.10
KSRB 11-18-8.1 : Providing and fixing sand cast iron soil waste double equal
junction of required degree 100x100x100x100mm, including cost of materials,
12.68 labour, testing complete as per specifications. Specification No. KBS 11.1.10 Each
KSRB 11-18-8.2 : Providing and fixing sand cast iron soil waste double equal
junction of required degree 75x75x75x75mm, including cost of materials,
12.69 labour, testing complete as per specifications. Specification No. KBS 11.1.10 Each
KSRB 11-18-8.3 : Providing and fixing sand cast iron soil waste double equal
junction of required degree 50x50x50x50mm, including cost of materials,
12.70 labour, testing complete as per specifications. Specification No. KBS 11.1.10 Each
KSRB 11-18-9.1 : Providing and fixing sand cast iron soil waste single equal
junction of required degree with access door 100x100x100mm, including cost
12.71 of materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-10.1 : Providing and fixing sand cast iron soil waste double
12.72 unequal junction of required degree100x100x75x75mm, including cost of Each
materials, labour, testing complete as per specifications. KBS 11-1.10
KSRB 11-18-11.1 : Providing and fixing sand cast iron soil waste single
12.73 unequal junction of required degree 100x100x75mm, including cost of Each
materials, labour, testing complete as per specifications. KBS 11-1.10
KSRB 11-18-11.2 : Providing and fixing sand cast iron soil waste single
12.74 unequal junction of required degree 100x100x50mm, including cost of Each
materials, labour, testing complete as per specifications. KBS 11-1.10
KSRB 11-18-11.3 : Providing and fixing sand cast iron soil waste single
12.75 unequal junction of required degree 75x75x50mm, including cost of materials, Each
labour, testing complete as per specifications. KBS 11-1.10
KSRB 11-18-12.1 : Providing and fixing sand cast iron soil waste double
equal invert plain branches of required degree 100x100x100x100mm,
12.76 including cost of materials, labour, testing complete as per specifications. Each
Specification No. KBS 11.1.10
KSRB 11-18-12.2 : Providing and fixing sand cast iron soil waste double
equal invert plain branches of required degree 75x75x75x75mm, including
12.77 cost of materials, labour, testing complete as per specifications. Specification Each
No. KBS 11.1.10
KSRB 11-18-12.3 : Providing and fixing sand cast iron soil waste double
equal invert plain branches of required degree 50x50x50x50mm, including
12.78 cost of materials, labour, testing complete as per specifications Specification Each
No. KBS 11.1.10
KSRB 11-18-13.1 : Providing and fixing sand cast iron soil waste single equal
invert plain branches of required degree 100x100x100x100mm, including cost
12.79 of materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-13.2 : Providing and fixing sand cast iron soil waste single equal
invert plain branches of required degree 75x75x75x75mm, including cost of
12.80 materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-13.3 : Providing and fixing sand cast iron soil waste single equal
invert plain branches of required degree 50x50x50x50mm, including cost of
12.81 materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-14.1 : Providing and fixing sand cast iron soil waste double
unequal invert plain branches of required degree 100x100x75x75mm,
12.82 including cost of materials, labour, testing complete as per specifications. Each
Specification No. KBS 11.1.10
KSRB 11-18-14.3 : Providing and fixing sand cast iron soil waste double
equal invert plain branches of required degree 75x75x50x50mm, including
12.83 cost of materials, labour, testing complete as per specifications. Specification Each
No. KBS 11.1.10
KSRB 11-18-15.1 : Providing and fixing sand cast iron soil waste single
unequal invert plain branches of required degree 100x100x75mm, including
12.84 cost of materials, labour, testing complete as per specifications. Specification Each
No. KBS 11.1.10
KSRB 11-18-15.2 : Providing and fixing sand cast iron soil waste single
unequal invert plain branches of required degree 75x75x50mm including cost
12.85 of materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-16.1 : Providing and fixing sand cast iron soil waste 152mm
12.86 offsets for 100mm pipes, including cost of materials, labour, testing complete Each
as per specifications. Specification No. KBS 11.1.10
KSRB 11-18-16.2 : Providing and fixing sand cast iron soil waste 114mm
12.87 offsets for 75mm pipes, including cost of materials, labour, testing complete Each
as per specifications. Specification No. KBS 11.1.10
KSRB 11-18-16.3 : Providing and fixing sand cast iron soil waste 230 mm
12.88 offsets for 75mm pipes, including cost of materials, labour, testing complete Each
as per specifications. Specification No. KBS 11.1.10
KSRB 11-18-17.1 : Providing and fixing sand cast iron trap of 100mm dia, of
self cleaning design with screwed down or hinged grating with or without vent
12.89 arm including cutting and making good the walls and floors, cost of materials, Each
labour, testing, complete as per specifications Specification No. KBS 11.1.10
KSRB 11-18-17.2 : Providing and fixing sand cast iron trap of 75mm dia, of
self cleaning design with screwed down or hinged grating with or without vent
12.90 arm including cutting and making good the walls and floors, cost of materials, Each
labour, testing, complete as per specifications. Specification No. KBS 11.1.10
KSRB 11-18-17.3 : Providing and fixing sand cast iron trap of 50mm dia, of
self cleaning design with screwed down or hinged grating with or without vent
12.91 arm including cutting and making good the walls and floors, cost of materials, Each
labour, testing, complete as per specifications. Specification No. KBS 11.1.10
KSRB 11-18-18.1 : Providing lead caulked joints to sand cast iron / cast iron (
spun ) pipes and fittings of 100mm dia, including cost of materials, labour,
12.92 testing, complete as per specifications. Specification No. KBS 13.2.7 Joint
KSRB 11-18-18.2 : Providing lead caulked joints to sand cast iron / cast iron (
12.93 spun) pipes and fittings of 75mm dia, including cost of materials, labour, Joint
testing, complete as per specifications specification No. KBS 13.2.7
KSRB 11-18-18.3 : Providing lead caulked joints to sand cast iron / cast iron (
12.94 spun) pipes and fittings of 50mm dia, including cost of materials, labour, Joint
testing, complete as per specifications Specification No. KBS 13.2.7
KSRB 11-18-9.2 : Providing and fixing sand cast iron soil waste single equal
junction of required degree with access door 75x75x75mm, including cost of
12.95 materials, labour, testing complete as per specifications Specification No. Each
KBS 11.1.10
KSRB 11-18-9.3 : Providing and fixing sand cast iron soil waste single equal
junction of required degree with access door 50x50x50mm, including cost of
12.96 materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-10.2 : Providing and fixing sand cast iron soil waste double
unequal junction of required degree100x100x50x50mm, including cost of
12.97 materials, labour, testing complete as per specifications. Specification No. Each
KBS 11.1.10
KSRB 11-18-10.3 : Providing and fixing sand cast iron soil waste double
12.98 unequal junction of required degree 75x75x50x50mm, including cost of Each
materials, labour, testing complete as per specifications.
KSRB 11-18-19.1 : Providing and fixing M.S stays and clamps for sand cast
12.99 iron pipes of 100mm dia including cost of materials, labour, complete as per No
specifications.
KSRB 11-18-19.2 : Providing and fixing M.S stays and clamps for sand cast
12.100 iron pipes of 75mm dia including cost of materials, labour, complete as per No
specifications.
KSRB 11-18-19.3 : Providing and fixing M.S stays and clamps for sand cast
12.101 iron pipes of 50mm dia including cost of materials, labour, complete as per No
specifications.
KSRB 11-18-14.2 : Providing and fixing sand cast iron soil waste double
unequal invert plain branches of required degree 100x100x75x75mm
12.102 including cost of materials, labour, testing complete as per specifications. Each
Specification No. KBS 11.1.10
Providing (China Clay) glazed foot rests of approved 1st quality and make
12.103 conforming to ISI specifications and fixing in CM (1:3) as directed (Rate Pair
includes cost of materials and conveyance to work spot).
Providing plastic seat with approved 1st quality and make conforming to ISI
specifications double flapped and fixing to English water closet with all
12.104.1 fittings (Rate includes cost of materials, fixtures and conveyance to work Pair
spot). - WHITE
Providing plastic seat with approved 1st quality and make conforming to ISI
specifications double flapped and fixing to English water closet with all
12.104.2 fittings (Rate includes cost of materials, fixtures and conveyance to work Pair
spot). - BLACK
Providing 3 cms dia GI telescopic flush tank lever of approved 1st quality and
make conforming to ISI specifications and fixing in position as directed by the
12.105 Engineer. Rate includes cost of materials and conveyance to work spot. Each
12.111 Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. Each
Providing stoneware gully trap of approved quality and make fixing in M-15
12.112.1 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all Each
materials, fixtures and lead).- 10cms x 10cms
Providing stoneware gully trap of approved quality and make fixing in M-15
12.112.2 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all Each
materials, fixtures and lead). - 15cms x 10cms
Providing and fixing CI Nahani trap of approved make conforming to ISI
specifications and construction of Cistern in M-15 as per directions (Rate is
12.113.1 inclusive of cost of materials and fixtures and conveyance of materials to work Each
spot). - 10cms x 7.5cms
Providing and fixing CI Nahani trap of approved make conforming to ISI
specifications and construction of Cistern in M-15 as per directions (Rate is
12.113.2 inclusive of cost of materials and fixtures and conveyance of materials to work Each
spot). - 12.5cms x 7.5cms
Cleaning the blockages of closets and soil pipes into working order with
12.114.1 M
scaffolding
Cleaning the blockages of closets and soil pipes into working order without
12.114.2 M
scaffolding
Cleaning the blockages of closets and soil pipes into working order
12.114.3 M
underground stone ware pipes
Providing and fixing white vitreous china clay, wall corner type, lipped front
watrless urinal basin of size 328x319x598mm C.I / M.S brackets, standard
12.115 flush pipe complete painting of fittings and brackets, cutting and making good Unit
the wall and floo
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good
12.116.1 the wall, ceiling and floor for sanitary pipelines including cost of all materials, M
labour charges, HOM of acquirements and testing complete as per
specifications. - 110mm dia
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good
12.116.2 the wall, ceiling and floor for sanitary pipelines including cost of all materials, M
labour charges, HOM of acquirements and testing complete as per
specifications. - 140mm dia
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good
12.116.3 the wall, ceiling and floor for sanitary pipelines including cost of all materials, M
labour charges, HOM of acquirements and testing complete as per
specifications. - 160mm dia
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good
12.116.4 the wall, ceiling and floor for sanitary pipelines including cost of all materials, M
labour charges, HOM of acquirements and testing complete as per
specifications. - 200mm dia
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good
12.116.5 the wall, ceiling and floor for sanitary pipelines including cost of all materials, M
labour charges, HOM of acquirements and testing complete as per
specifications. - 250mm dia
KSRB13-1.2 : Providing and fixing to wall, ceiling and floor galvanised / mild
steel tube 20mm dia nominal bore with fittings (medium grade weight 1.65
13.2 kg/mtr) B class including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
KSRB13-1.3 : Providing and fixing to wall, ceiling and floor galvanised / mild
steel tube 25mm dia nominal bore with fittings (medium grade weight
13.3 2.51kg/mtr) B class including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
KSRB13-1.4 : Providing and fixing to wall, ceiling and floor galvanised / mild
steel tube 32mm dia nominal bore with fittings (medium grade weight
13.4 3.23kg/mtr) B class including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
KSRB13-1.5 : Providing and fixing to wall, ceiling and floor galvanised / mild
steel tube 40mm dia nominal bore with fittings (medium grade weight 3.72
13.5 kg/mtr) B class including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
KSRB13-1.6 : Providing and fixing to wall, ceiling and floor galvanised / mild
steel tube 50mm dia nominal bore with fittings (medium grade weight
13.6 5.24kg/mtr) B class including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
KSRB13-5 : Providing and fixing water meter with stop cock, jam nut, socket
in G.I pipe line including cutting and threading the pipe and making long
13.22 screws including cost of all materials, labour, HOM of equipments and testing Set
complete as per specifications. Specification No.KBS 13.2.19 / 13.16
KSRB13-8.3 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.68 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.4 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 40mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.69 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.5 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.1 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.6 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 63mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.2 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.7 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.3 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.8 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.4 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.5 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.6 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density
polyethylene pipes 6.00 kgf/sq.cm working pressure 160mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.70.7 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
KSRB13-9.1 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.71 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.2 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 40mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.72 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.3 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.1 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.4 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 63mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.2 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.5 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.3 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.6 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.4 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.7 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.5 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
KSRB13-9.8 : Providing and fixing to wall, ceiling and floor high density
polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter
with special flange, compression type fittings, wall clips, making good the
13.73.6 wall, ceiling and floor, including cost of all materials, labour charges, HOM of M
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
Providing and fixing polished granite sink of size 60cms x 90cms of 23cm
thick, the sink portion shall be 15cm in depth of shapes oval / round / square
over brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and
13.88 Each
lift, loading and unloading, transportation charges and all other incidental
charges etc., complete as per specification and directions of the Engineer-in-
charge of the work.
Providing and fixing polished granite sink of size 60cms x 75cms of 23cm
thick, the sink portion shall be 15cm in depth of shapes oval / round / square
over brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and
13.89 Each
lift, loading and unloading, transportation charges and all other incidental
charges etc., complete as per specification and directions of the Engineer-in-
charge of the work.
Providing and fixing polished granite sink of size 60cms x 60cms of 23cm
thick, the sink portion shall be 15cm in depth of shapes oval / round / square
over brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and
13.90 Each
lift, loading and unloading, transportation charges and all other incidental
charges etc., complete as per specification and directions of the Engineer-in-
charge of the work.
Cutting granite slab upto 40mm thick and required width of grooves for fixing
13.92.1 No
Stainless steel sink upto 60cm x 45 cms and fixing using adhesives.
Cutting granite slab upto 40mm thick and required width of grooves for fixing
13.92.2 No
Stainless steel sink above 60cm x 45 cms and fixing using adhesives.
Providing and fixing concealed UVstabilised and antimicrobial fusion 3 layer
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings
13.93.1 incluiding brass threaded polypropelene random fittings including chasing the M
walls. Internal Plumbing - for concealed fitting - 20mm pipe outer dia (3
layer)
Flooring
Item Code Item Description Unit
KSRB 14.1 : Providing and laying flooring with burnt stone slabs 10 cms
thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed
14.1 with cement mortar 1:3, , including cost of materials, labour, curing complete Sqm
as per specifications. Specification No. KBS 14.26
KSRB 14.2 : Providing and laying flooring with burnt stone slabs 10 cms
thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and
14.2 pointed with cement mortar 1:3, , including cost of materials, labour, curing Sqm
complete as per specifications. Specification No. KBS 14.26
KSRB 14.3 : Providing and laying flooring and steps machine cut granite
slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with
14.3 cement mortar 1:3 over existing cement concrete bed , including cost of Sqm
materials, labour, curing complete as per specifications. Specification No.
KBS 14.26
KSRB 14.4 : Providing and laying flooring and steps fine dressed granite
stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed
14.4 with cement mortar 1:3 over existing cement concrete bed , including cost of Sqm
materials, labour, curing complete as per specifications. Specification No.
KBS 14.26
KSRB 14.5 : Providing and laying flooring and steps fine machine polished
granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and
14.5 joints finished with cement mortar 1:3 over existing cement concrete bed , Sqm
including cost of materials, labour, curing complete as per specifications.
Specification No. KBS 14.26
KSRB 14.6-1: Providing and laying heavy duty cobble stones 60mm thick
interlock pavers, using cement and course sand for manufacture of blocks of
approved size, shape and colour with a minimum compressive strength of 281
kg per sqm over 50mm thick sand bed (average thickness ) and compacting
with plate vibrator having 3 tons compaction force thereby forcing part of
14.6 sand underneath to come up in between joints, final compaction of paver Sqm
surface joints into its final level, including cost of materials, labour and HOM
of machineries complete as per specifications. Specification No. KBS
KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick
interlock pavers, using cement and course sand for manufacture of blocks of
approved size, shape and colour with a minimum compressive strength of 281
kg per sqm over 50mm thick sand bed (average thickness ) and compacting
with plate vibrator having 3 tons compaction force thereby forcing part of
14.7 sand underneath to come up in between joints, final compaction of paver Sqm
surface joints into its final level, including cost of materials, labour and HOM
of machineries complete as per specifications. Specification No. KBS
KSRB 14.7-1: Providing and laying flooring with M15 cement concrete 40
mm thick using broken granite 20mm and down size laid to line and level in
14.8 one layer and finish with a floating coat of neat cement , including cost of Sqm
materials, labour, curing, complete as per specifications. Specification No.
KBS 14.3
KSRB 14.7-2 : Providing and laying red oxide flooring 40 mm thick, with an
under layer of 30mm thick M-15 cement concrete, using broken granite metal
of 12.5mm nominal size and top layer of 10mm thick plaster with 1:3 cement
mortar mixed with red oxide ( using 3.5 kg of red oxide per 50 kg of cement )
14.9 Sqm
finished with floating coat of neat cement mixed with red oxide ( mix of same
proportion ) , including cost of materials, labour, curing, complete as per
specifications. Specification No. KBS 14.3
KSRB 14.10-2: Flooring with 25mm to 40mm thick polished shahabad slabs
using cement mortar 1:6, 25mm thick over existing cement concrete bed or top
of roof laid to line and level and jointed with cement slurry mixed with
14.16 pigment to match the shade of the slab, , including cost of materials, labour, Sqm
curing, polishing complete as per specifications. Specification No. KBS
KSRB 14.11-1: Providing mosaic flooring with cast-in-situ 40mm thick using
marble chips flooring rubbed and polished to granolithic finish with under
layer of 28mm thick cement concrete M-15 with stone aggregate 12mm and
down size, and top layer 12mm thick with dark shade pigment with ordinary
cement in top layer only using white, black, chacolate, yellow or baroda green
14.18 marble chips of size from 7 to 10 nominal size laid in cement marble powder Sqm
mix 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4
cement marble powder mix : 7 marble chips by volume ) curing polishing
oxalic acid wash, wax polish , including cost of materials, labour, complete as
per specifications. Specification No. KBS 14.8
KSRB 14.11-2 : Providing mosaic flooring with cast-in-situ 40mm thick using
marble chips flooring, rubbed and polished to granolithic finish with under
layer of 28mm thick cement cocrete M-15 with stone aggregate 12mm and
down size , and top layer 12mm thick with light shade pigment with white
cement in top layer only using white, black, chacolate, yellow or baroda green
14.19 marble chips of size from 7 to 10 nominal size laid in cement marble stone Sqm
mixed 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4
cement marble powder mix : 7 marble chips by volume ) curing polishing
oxalic acid wash, wax polish , including cost of materials, labour, complete as
per specifications. Specification No. KBS 14.8
KSRB 14.11-3 : Providing mosaic flooring with cast-in-situ 40mm thick using
marble chips flooring rubbed and polished to granolithic finish with under
layer of 28mm thick cement cocrete M-15 with stone aggregate 12mm and
down size, and top layer 12mm thick with medium shade pigment with
approximately 50% white cement and 50% ordinary cement in top layer only
using white, black, chacolate, yellow or baroda green marble chips of size
14.20 from 7 to 10 nominal size laid in cement marble stone mixed 3:1 ( 3 cement : Sqm
1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble powder
mix : 7 marble chips by volume ) curing polishing oxalic acid wash, wax
polishing, including cost of materials, labour, complete as per specifications.
Specification No. KBS 14.8
KSRB 14.11-4 : Providing mosaic flooring with cast-in-situ 40mm thick using
marble chips and polished to granolithic finish with under layer of 28mm thick
cement concrete M-15 with stone aggregate 12mm and down size , and top
layer 12mm thick with white cement without any pigment in top layer only
using white, black, chacolate, yellow or baroda green marble chips of size
14.21 from 7 to 10 nominal size laid in cement marble powder mix 3:1 ( 3 cement : 1 Sqm
marble powder by weight ) in proportion of 4:7 ( 4 cement marble powder mix
: 7 marble chips by volume ) curing, polishing oxalic acid wash, wax polish ,
including cost of materials, labour, complete as per specifications.
Specification No. KBS 14.8
KSRB 14.11-5 :Extra for providing and fixing aluminium strips 40 mm wide
and 1.5mm thick painted with a protective coat of bitumen for joints of mosaic
14.22 floors, including cost of materials, labour, curing, complete as per M
specifications. Specification No. KBS
KSRB 14.11-6 :Extra for providing and fixing glass strips 40 mm wide and
14.23 4mm thick for joints of mosaic floors , including cost of materials, labour, M
curing, complete as per specifications. Specification No. KBS
KSRB 14.12-1: Providing mosaic tiles flooring with precast grey colour
mosaic tiles 20mm thick using marble chips of approved colour 7 to 10
nominal size laid in floors and landings on a bed of 25mm thick cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match
14.24 Sqm
the shade of tiles curing, rubbing, polishing, oxalic acid wash, wax polish ,
including cost of materials, labour, HOM of machinary complete as per
specifications. Specification No. KBS 14.11
KSRB 14.12-2: Providing mosaic tiles flooring with precast light shade
pigment with white cement mosaic tiles 20mm thick using marble chips of
approved colour 7 to 10 nominal size laid in floors and landings on a bed of
25mm thick cement mortar 1:6, mix, jointed with neat cement slurry mix with
14.25 Sqm
pigment to match the shade of tiles, curing. rubbing, polishing, oxalic acid
wash, wax polish, including cost of materials, labour, HOM of machinary
complete as per specifications. Specification No. KBS 14.11
KSRB 14.12-3 : Providing mosaic tiles flooring with precast medium shade
pigment using 50% white cement and 50% ordinary cement mosaic tiles
20mm thick using marble chips of approved colour 7 to 10 nominal size laid
in floors and landings on a bed of 25mm thick average thickness of cement
14.26 mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match Sqm
the shade of tiles, curing, rubbing, polishing, oxalic acid wash, wax polish ,
including cost of materials, labour, HOM of machinary complete as per
specifications.
KSRB 14.12-4 : Providing mosaic tiles flooring with white precast cement
mosaic tiles 20mm thick using marble chips of 7 to 10 nominal size laid in
floors and landings on a bed of 25mm thick average thickness of cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match
14.27 Sqm
the shade of tiles, curing, rubbing, polishing, oxalic acid wash, wax polish ,
including cost of materials, labour, HOM of machinary complete as per
specifications.
KSRB 14.13-1: Providing precast chequered mosaic tiles dark shade using
ordinary grey cement for steps and flooring, with precast 20mm thick, using
marble chips of 7 to 10 nominal size laid in floors, steps and landings on a bed
of 12mm thick cement mortar 1:3 mix, and jointed with neat cement slurry
14.28 Sqm
mixed with pigment to match the shade of tiles, curing, rubbing, polishing,
oxalic acid wash, wax polish , including cost of materials, labour, complete as
per specifications.
KSRB 14.13-2: Providing precast chequered mosaic tiles light shade using
white cement for steps and flooring, 20mm thick, using marble chips of 7 to
10 nominal size laid in floors, steps and landings on a bed of 12mm thick
cement mortar 1:3 mix, and jointed with neat cement slurry mixed with
14.29 Sqm
pigment to match the shade of tiles curing, rubbing, polishing, oxalic acid
wash, wax polish , including cost of materials, labour, complete as per
specifications. Specification No. KBS 14.13, 14.14
KSRB 14.13-4: Providing precast chequered mosaic tiles white colour for
steps and flooring, 20mm thick, using marble chips of 7 to 10 nominal size
laid on a bed of 12mm thick cement mortar 1:3 mix, and jointed with neat
14.31 cement slurry mixed with pigment to match the shade of tiles rubbing, Sqm
polishing, oxalic acid wash, wax polish, including cost of materials, labour,
curing, complete as per specifications. Specification No. KBS 14.13, 14.14
KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
14.36.1 mortar 1:3 mix, flush pointing with white cement using colour pigment , Sqm
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles of size 15x15cms 6mm thick
KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
14.36.2 mortar 1:3 mix, flush pointing with white cement using colour pigment , Sqm
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles of size 30x30cms 6mm thick
KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
14.36.3 mortar 1:3 mix, flush pointing with white cement using colour pigment , Sqm
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles 400 x 400mm on a bed of 20mm thick
KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
14.36.4 mortar 1:3 mix, flush pointing with white cement using colour pigment , Sqm
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic tiles 30cm x 60cm 6mm thick on a bed of 20mm thick
KSRB 14.15-1: Providing marble slab flooring 20mm thick with edges of slab
machine cut, for flooring, treads of steps and landings laid on a bed of 25mm
thick cement mortar 1:6, mix, to line and level, jointed with cement slurry
curing, rubbing, polishing complete finishIing with flush pointing using white
cement, including cost of materials, HOM of machineries, labour, curing,
14.37 complete as per specifications. Note : While preparing analysis the quality of Sqm
marble slab should be clearly noted namely white marble, adanga marble,
makrana etc., and also size of slab should be noted clearly. Specification No.
KBS 14.18
KSRB 14-16.1 : Providing skirting upto 30 cms. height with cement mortar
1:3 finished with a floating coat of neat cement including rounding off
14.38 junctions floor, overall 15 mm thick including cost of materials, labour, Sqm
complete as per specifications. Specification No.KBS 14.5
KSRB 14-16.2 : Providing red oxide skirting upto 30 cms. height with cement
mortar 1:3 including rounding off junctions with floor, finished overall 15 mm
thick, top portion 5mm thick mixed with red oxide and a floating coat of neat
14.39 cement using 3.5kg of red oxide of iron per 50 kg of cement including cost of Sqm
materials, labour, complete as per specifications. Specification No.KBS 14.5
KSRB 14-17.1 : Providing skirting, dado, rises of steps with white glazed tiles
6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over rough plaster surface ( excluding cost of rough plastered surface
14.40 which should be measured and paid separately) using glazed tiles of approved Sqm
make and size including cost of materials, labour, complete as per
specifications. Specification No.KBS 14.16, 14.17
KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed
tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry
over rough plaster surface ( excluding cost of rough plastered surface which
should be measured and paid separately) using glazed tiles of approved make
14.41.1 Sqm
and size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 15x15 cms 6mm
thick
KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed
tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry
over rough plaster surface ( excluding cost of rough plastered surface which
should be measured and paid separately) using glazed tiles of approved make
14.41.2 Sqm
and size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x60 cms 6mm
thick with border of size 30 x 10 cms
KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed
tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry
over rough plaster surface ( excluding cost of rough plastered surface which
should be measured and paid separately) using glazed tiles of approved make
14.41.3 Sqm
and size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x45 cms 6mm
thick with border of size 30 x 10 cms.
KSRB 14-18.1 : Providing skirting, dado, rises of steps with marble slabs not
exceeding 30 cms. height on 10 cms. thick cement mortar 1:3 and jointed with
white cement slurry over rough plaster surface (excluding cost of rough
plastered which should be measured and paid separately ) using marble slab
14.42 Sqm
with machine cut edges upto 25cms. thick including cost of materials, labour,
complete as per specifications. Specification No.KBS 14.19
Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of
approved make, quality and colour of size 600x600x10mm thick fixed on
14.43 existing flooring with a special roffe adhesive for flooring and skirting etc., Sqm
complete including providing spears at required interval and removing stains
etc., complete.
Providing and fixing Vitrified glazed tiles of approved make, quality & colour
of size 600 x 600 x 1Omm thick fixed on existing flooring with special
adhesive for flooring, skirting and jointed with neat cement slurry mixed with
14.44 pigment to mach shade of tiles, including providing spacers at required Sqm
interval and removing stains, cost of materials, mortar, labour etc., complete
as per specification.
Providing and fixing Vitrified glazed tiles of approved make, quality & colour
of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for
flooring, skirting and jointed with neat cement slurry mixed with pigment to
14.45 mach shade of tiles, including providing spacers at required interval and Sqm
removing stains, including cost of all mateirals, mortar, labour, etc , Complete
as per specification.
Providing and fixing Vitrified glazed tiles of approved make, quality & colour
of size 900 x 900 x 12mm thick fixed on bed of 12mm thick cement mortar for
flooring, skirting and JOinted with neat cement slurry mixed with pigment to
14.45.1 mach shade of tiles, including providing spacers at required interval and Sqm
removing stains, including cost of all mateirals, mortar, labour, etc., Complete
as per specification.
Providing and laying pattern flooring for staircase treads and risers using the
combination of 20mm thick ruby red granite @ 66%,20 mm thick grey granite
@ 20%, 20mm thick, 20mm thick black granite 14%. The granite materials
14.46 are laid on existing bed of CM 1:3 20mm thick pointed with colour pigment, Sqm
including full rounding for nosing, flaming the ruby red granite for 50 mm
wide curing etc., complete as per specification.
Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying
POP on finished surface and cleaning the surface, including the cost of all
14.47.1 Sqm
materials and labours etc., complete as per specifications. - using silver grey
granite / Multy Red / Ruby Red / Black / HassanGreen Granite of width not
less than 1200mm
Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying
POP on finished surface and cleaning the surface, including the cost of all
14.47.2 Sqm
materials and labours etc., complete as per specifications. - using silver grey
granite / Multy Red / Ruby Red / Black / HassanGreen Granite of width not
less than 900mm
Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying
POP on finished surface and cleaning the surface, including the cost of all
14.47.3 Sqm
materials and labours etc., complete as per specifications. - using 10mm thick
silver grey granite / Multy Red / Ruby Red/ Black / Hassan Green Granite tiles
Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying
14.47.4 POP on finished surface and cleaning the surface, including the cost of all Sqm
materials and labours etc., complete as per specifications. - using 19mm thick
Raw Silk / Black Pearl granite of width not less than 1200 mm
Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying
14.47.5 POP on finished surface and cleaning the surface, including the cost of all Sqm
materials and labours etc., complete as per specifications. - using 19mm thick
Raw Silk / Black Pearl granite of width not less than 900 mm
Providing and fixing of wall cladding using 20mm thick gang saw water cut
Shiva gold granite, grey granite in CM 1:3 proportion cut to required shape,
pattern with paper joints, finished with cement mortal using white cement and
14.49 colour pigments to match the colour of slab making through jointing with Sqm
sealant, making holes 25mmx12mm grooves in joints including curing etc.,
complete.
"Providing and fixing skirting of 300mm high using prepolished water
cut/gang saw of 19mm thick grey granite 0.5mm wide chamfered width and
14.50 depth and fixing in CM 1:4 of 20mm thick after chipping the walls etc., M
complete.
Providing and laying Hassan Green granite flooring for staircase, treads and
rises using pre polished 20 mm thick water cut green Granite slab laid over
14.51 existing cement concrete bed in CM 1:3, average 20mm thick including full Sqm
rounding for nosing , cutting 3 line grooves not more than 2 mm wide for
antiskidding, curing etc.,complete.
Providing and laying plat form using prepolished, water cut / gang saw 40mm
thick telephonic Black Granite. laid on existing vertical -supports and fixing in
CM 1:3 proportion. Including cutting to required shape, pattern with paper
14.52 joints, including full rounding for nosing, finished with cement mortar, Sqm
pointed with colour pigments to match the colour of slab making through
jointing with sealant, making holes 25mm x 12mm grooves in joints including
curing.
Providing full nosing for 40mm thick granite slab using required machinery
14.53 including cost and conveyance of all materials, labour for all items of work, M
HOM of equipment etc., complete as per specification
Providing half nosing for 40mm thick granite slab using required machinery
14.54 including cost and conveyance of all materials, labour for all items of work, M
HOM of equipment etc., complete as per specification
Providing full nosing for 20mm thick granite slab using required machinery
14.55 including cost and conveyance of all materials, labour for all items of work, M
HOM of equipment etc., complete as per specification
Providing half nosing for 20mm thick granite slab using required machinery
14.56 including cost and conveyance of all materials, labour for all items of work, M
HOM of equipment etc., complete as per specification
Providing and fixing for flooring 40mm thick sadarhalli grey flammed granite
14.57 slab for bath areas in Bathrooms over a bed of 25mm thick CM 1:6 and fixing Sqm
granite slab with CM 1:3.
Providing and fixing granite flooring in combination of 19mm thick (Avg)
gang saw water cut LAKARED granite with 86% and with 14% of 19mm
thicl (avg) Black granite in CM 1:4 proportion with a coat of rough plastering
using CM 1:4, cut to required shape, pattern with paper joints, finished with
cement mortar using white cement and colour pigments to match the colour of
14.58 slab making through jointing with sealant, grooves in joints including cost of Sqm
curing etc., complete including cost and conveyance of all materials, labour
for all items of work, HOM of equipment etc., complete as per specification
Providing and fixing for flooring 20mm thick gang saw water cut telephonic
black granite in CM 1:4 proportion with a coat of rough plastering using CM
1:4, cut to required shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match the colour of slab
14.59 Sqm
making through jointing with sealant, grooves in joints including cost of
curing etc., complete including cost and conveyance of all materials, labour
for all items of work, HOM of equipment etc., complete as per specification
Providing and fixing 20mm thick gang saw water cut LAKARED granite in
CM 1:4 proportion with a coat of rough plastering using CM 1:4, cut to
required shape, pattern with paper joints, finished with cement mortar using
white cement and colour pigments to match the colour of slab making through
14.60 Sqm
jointing with sealant, grooves in joints including cost of curing etc., complete
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification .
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli
gray granite in CM 1:4 proportion, cut to required shape, pattern with paper
14.61.1 joints, finished with cement mortar using white cement and colour pigments to Sqm
match the colour of slab making through jointing with sealant, groves in joints
including cost of curing - minimum width of 1200mm
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli
gray granite in CM 1:4 proportion, cut to required shape, pattern with paper
14.61.2 joints, finished with cement mortar using white cement and colour pigments to Sqm
match the colour of slab making through jointing with sealant, groves in joints
including cost of curing - minimum width of 900mm.
Providing and fixing Ceramic tiles of size 400x400mm for flooring, threads,
steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush
pointing with white cement mixed with matching colour pigment including
14.63 curing, cleaning etc., complete. The work includes cost of all materials, labour Sqm
charges for all items of work, hire charges for equipment, , etc., complete as
per specification
Providing and fixing colour glazed tiles of size 300mmx600mm for walls with
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with white
cement with matching colour pigment with necessary curing, cleaning
including providing and removing scaffolding wherever necessary etc.,
14.64 Sqm
complete. The work includes cost of all materials, labour charges for all items
of work, hire charges for equipment, etc., complete as per specification.
Providing and fixing colour glazed tiles of size 300mmx450mm for walls with
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with white
cement with matching colour pigment with necessary curing, cleaning
including providing and removing scaffolding wherever necessary etc.,
14.65 Sqm
complete. The work includes cost of all materials, labour charges for all items
of work, hire charges for equipment, etc., complete as per specification.
Providing and fixing of wall cladding using 20 mm thick gang saw water cut
granite in CM 1:3 proportion cut to required shape patron with paper joint
14.67.1 finished with cement mortar using white cement and colour pigments to match Sqm
the colour of slab making through jointing with sealant, making holes 25mm
Providing and fixing of wall cladding using 20 mm thick gang saw water cut
granite in CM 1:3 proportion cut to required shape patron with paper joint
14.67.2 finished with cement mortar using white cement and colour pigments to match Sqm
the colour of slab making through jointing with sealant, making holes 25mm
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm
thick on 12mm thick cement mortar 1:3 & jointed with Adhesive / cement
14.68 slurry over rough plaster surface excluding cost of rough plasterd surface and Sqm
the surface is painted with red apex paint and black apex paint into the groves.
Supplying, fabricating and fixing of Stainless steel cladding for walls using
304 grade Stainless steel 16 guage sheet wall cladding of thickness over the
frame made out of 50x50mmx3mm thickness anodized aluminium frame work
at an equal distance of 2 ft vertifically fixed to the wall using 100mm screws,
14.69 Sqm
guttas, anchor bolts and fastners with all necessary bending and cutting as per
the desing and site condition. The frame work finally to be finished with
12mm BWP plywood to receive the SS sheet on it uniformly
Providing and laying of teak wooden polished flooring of 12mm thick, high
density timber of approved colour and design with end trims, transition,
14.70 profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm Sqm
thick foam underlay etc.,
Providing and laying of Modular wooden polished flooring of 12mm thick,
high density timber of approved colour and design with end trims, transition,
14.71 profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm Sqm
thick foam underlay etc.,
Providing Venyl flooring of approved quality and make, fixed on the top of
14.72 existing flooring fixed with suitable adhesive, including cutting to the requied Sqm
size and fixing etc. complete
Finishing Work
KSRB 15.1.5 Providing raised and cut pointing to coursed stone masonry with
cement mortar 1:3, 20mm, after raking joints to depth of 20mm nicely lining,
15.5 including cost of materials, labour, curing complete as per specifications. Sqm
KSRB 15.1.6 Providing raised and cut pointing to coursed stone masonry with
cement mortar 1:4, 20mm, after raking joints to depth of 20mm nicely lining,
15.6 including cost of materials, labour, curing complete as per specifications. Sqm
KSRB 15.2.1 Providing flush pointing to stone slab pavements, with cement
15.7 mortar 1:3, after raking joints, nicely lining, including cost of materials, Sqm
labour, curing complete as per specifications.
KSRB 15.2.2 Providing ruled pointing to stone slab pavements with cement
15.8 mortar 1:3, 20mm deep, after raking joints , including cost of materials, Sqm
labour, curing complete as per specifications.
KSRB 15.3.1 Providing 12mm thick cement plaster in single coat with cement
mortar 1:3, to brick masonry including rounding off corners wherever required
15.9 smooth rendering, : Providing and removing scaffolding, including cost of Sqm
materials, labour, curing complete as per specifications.
KSRB15-3.2 : Providing 12mm thick cement plaster in single coat with
cement mortar 1:4, to brick masonry including rounding off corners wherever
15.10 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.3 : Providing 12mm thick cement plaster in single coat with
cement mortar 1:6, to brick masonry including rounding off corners wherever
15.11 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.4 : Providing 15mm thick cement plaster in single coat with
cement mortar 1:3, to brick masonry including rounding off corners wherever
15.12 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with
cement mortar 1:4, to brick masonry including rounding off corners wherever
15.13 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with
cement mortar 1:6, to brick masonry including rounding off corners wherever
15.14 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.7 : Providing 18mm thick cement plaster in single coat with
cement mortar 1:3, to brick masonry including rounding off corners wherever
15.15 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with
cement mortar 1:4, to brick masonry including rounding off corners wherever
15.16 required smooth rendering, : Providing and removing scaffolding, including Sqm
cost of materials, labour, curing complete as per specifications.
KSRB15-3.9 :Providing 18mm thick cement plaster in single coat with cement
mortar 1:6, to brick masonry including rounding off corners wherever required
15.17 smooth rendering, : Providing and removing scaffolding, including cost of Sqm
materials, labour, curing complete as per specifications.
KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with
cement mortar 1:3, to stone masonry & concrete surface including rounding
15.18 off corners wherever required smooth rendering, : Providing and removing Sqm
scaffolding, including cost of materials, labour, curing complete as per
specifications.
KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured
out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc
coating of 120gms per sqm width, along route of walls chipped for services,
15.35 junction between RCC and brick walls including cost of materials, labour for M
fixing complete as per specifications. ( length of mesh only be measured for
payment )
KSRB 15.8.3 Providing and fixing plaster mesh 200mm wide manufactured
out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc
coating of 120gms per sqm width, along route of walls chipped for services,
15.36 junction between RCC and brick walls including cost of materials, labour for M
fixing complete as per specifications. ( length of mesh only be measured for
payment )
KSRB 15.9 Providing and fixing corner beads 45x45mm size manufactured
out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc
15.37 coating of 120gms per sqm width, along exposed corners of walls, coloumns, M
lintels including cost of materials, labour for fixing complete . (length of mesh
be measured for payment)
KSRB 15.10.1 Providing white washing to new wall surface in two coats with
15.38 lime of approved quality, to give an even shade including cost of materials, Sqm
labour, complete as per specifications.
KSRB 15.10.2 Providing white washing for every one additional coat with
15.39 lime of approved quality, to give an even shade including cost of materials, Sqm
labour, complete as per specifications.
KSRB 15.10.3 Providing white washing to ceiling and / or sloping roof
15.40 surface in two coats with lime of approved quality, to give an even shade Sqm
including cost of materials, labour, complete as per specifications.
KSRB 15.10.4 Providing white washing to ceiling and / or sloping roof
surface with additional one coat with lime of approved quality, to give an even
15.41 shade including cost of materials, labour, complete as per specifications. Sqm
KSRB 15.12.2 Providing Gopi colour washing to new wall surface in one coat
with lime and gopi colour of approved quality, to give an even shade after
15.45 thoroughly brooming the surface to remove all dirt, dust, mortar drops and Sqm
other foreign matter including cost of materials, labour, complete as per
specifications.
KSRB 15-13.4 : Extra over Item 15-13.3 for applying distemper primer over
15.47.2 Sqm
ceiling and / or sloping roof as per specifications.
KSRB 15-13.5 : Providing and applying one coat on old surface dry distemper
of approved brand, and shade on wall surface after thoroughly brooming the
15.48.1 surface clean of all gease, dirt, loose pieces of scales including preparing the Sqm
surface even and sand paper smooth, cost of material, labour, complete as per
specifications. -wall surface-
KSRB 15-13.6 : Extra over Item 15-13.5 for applying distemper over ceiling
15.48.2 Sqm
and /or sloping roof as per specifications.
KSRB 15-13.7 : Extra for providing and applying every subsequent cost of
dry distemper of approved brand , for item no. 15-13.3 and 15-13.5 of
15.48.3 approved shade on wall surface cost of materials, labour, complete as per Sqm
specifications.
KSRB 15-14.1 : Providing and applying two coats with oil bound washable
distemper of approved brand and shade on wall surface including priming coat
with distemper primer after throughly brooming the surface free from mortar
15.49.1 drops and other foreign matter including preparing the surface even and sand Sqm
paper smooth, cost of materials, labour, complete as per specifications.
KSRB 15-14.2 : Extra over Item 15-14.1 for applying oil bound washable
15.49.2 Sqm
distemper on ceiling and / or sloping roof as per specifications.
KSRB 15-14.3 : Providing and applying one coat with oil bound washable
distemper of approved brand and shade on wall surface to give an even shade
15.50.1 after throughly brooming the surface free from all grease, dirt, loose peases of Sqm
scales, including preparing the surface even and sand paper smooth, cost of
materials, labour, complete as per specifications.
KSRB 15-14.4 : Extra over Item 15-14.3 for applying one coat with oil bound
15.50.2 washable distemper on ceiling and / or sloping roof as per specifications. Sqm
KSRB 15-15.1 : Providing and applying painting in two coats with plastic
emulsion paint of approved brand on wall surface to give an even approved
15.51.1 shade after thoroughly brushing the surface, free from mortar drops and other Sqm
foreign matter including preparing the surface even and sand paper smooth,
cost of materials, labour, complete as per specifications.
KSRB 15-15.1 : Providing and applying painting in two coats with plastic
emulsion paint of approved brand on wall surface to give an even approved
shade after thoroughly brushing the surface, free from mortar drops and other
15.51.2 foreign matter including preparing the surface even and sand paper smooth, Sqm
cost of materials, labour, complete as per specifications. - with primer
KSRB 15-15.2 : Extra over Item 15-15.1 for painting two coats with plastic
15.51.3 emulsion paint of approved brand and shade on ceiling and / or sloping roof as Sqm
per specifications.
KSRB 15-15.3 : Providing and applying painting in one coat with plastic
emulsion paint of approved brand and manufacture on wall surface to give an
15.52.1 even approved shade after throughly brushing the surface, free from mortar Sqm
drops and other foreign matter including preparing the surface even and sand
paper smooth, cost of materials, labour, complete as per specifications.
KSRB 15.15.4 : Extra over Item 15-15.3 for painting with one coat plastic
15.52.2 emulsion paint of approved brand and shade on ceiling and / or sloping roof as Sqm
per specifications.
KSRB 15-15.5 : Extra for providing and applying every subsequent coat of
painting with plastic emulsion paint of approved brand and shade for Item
15.52.3 no.15-15.1 and 15-15.3 cost of materials, labour, complete as per Sqm
specifications.
KSRB 15-16.1 : Providing and finishing external walls in two coats with
waterproof cement paint of approved brand and shade to give an even shade
15.53.1 after throughly brooming the surface to remove all dirt and loose powdered Sqm
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
KSRB 15-16.1 : Providing and finishing external walls in two coats with
waterproof cement paint of approved brand and shade to give an even shade
15.53.2 after throughly brooming the surface to remove all dirt and loose powdered Sqm
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications. - with primer
KSRB 15-16.3 : Extra for providing and applying every subsequent coat of
15.53.3 waterproofing cement paint of approved brand and shade for Item no.15-16.1 Sqm
cost of materials, labour, complete as per specifications.
KSRB 15-16.2 : Providing and finishing external walls in one coat with
waterproof cement paint of approved brand and shade to give an even shade
15.54.1 after throughly brooming the surface to remove all dirt and loose powdered Sqm
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
KSRB 15-16.2 : Providing and finishing external walls in one coat with
waterproof cement paint of approved brand and shade to give an even shade
15.54.2 after throughly brooming the surface to remove all dirt and loose powdered Sqm
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications. - with primer
KSRB 15-16.3 : Extra for providing and applying every subsequent coat of
15.54.3 waterproofing cement paint of approved brand and shade for Item no.15-16.1 Sqm
and 15-16.2 cost of materials, labour, complete as per specifications.
KSRB 15-17.1 : Applying priming coat over new wood surface and / or wood
based surface with white lead paint priming including preparing the surface
15.55 after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering Sqm
and knotting ready mix paint including cost of materials, labour, complete as
per specifications.
KSRB 15-17.2 : Applying priming coat over new wood surface and / or wood
based surface after brushing with wood primer pink paint including preparing
15.56 the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand Sqm
papering and knotting ready mix paint including cost of materials, labour,
complete as per specifications.
KSRB 15-17.3 : Applying priming coat over new wood surface and / or wood
based surface after brushing with aluminium paint primer, water resistant
15.57 including preparing the surface after thoroughly cleaning oil, grease, dirt and Sqm
foreign matter, sand papering and knotting ready mix paint including cost of
materials, labour, complete as per specifications.
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood
based surface, after brushing with ready mix enamel priming paint including
15.58 preparing the surface after thoroughly cleaning oil, grease, dirt and foreign Sqm
matter, sand papering and knotting ready mix paint including cost of materials,
labour, complete as per specifications.
KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood
based surface after preparing the surface after throughly cleaning oil, grease,
15.59 dirt and foreign matter, sand papering and knotting liquid wood filler, for Sqm
varnish including cost of materials, labour, complete as per specifications.
KSRB 15-17.6 : Providing and applying painting two coats ( excluding
priming coat ) on new wood surface and / or wood based surface with enamel
15.60.1 paint to give an even shade, cleaning the surface of all dirt, dust and foreign Sqm
matter, sand papering including cost of materials, labour, complete as per
specifications.
KSRB 15-17.8 : Extra over Item No. 15-17.6 for applying every subsequent
coat of enamel paint to give an even shade after cleaning the surface of all dirt,
15.60.2 dust and foreign matter, sand papering including cost of materials, labour, Sqm
complete as per specifications.
KSRB 15-17.7 : Providing and applying painting one coat ( excluding priming
coat ) on new wood surface and / or wood based surface with enamel paint to
15.61.1 give an even shade after cleaning the surface of all dirt, dust and foreign Sqm
matter, sand papering including cost of materials, labour, complete as per
specifications.
KSRB 15-17.8 : Extra over Item No.15-17.7 for applying every subsequent
coat of enamel paint to give an even shade after cleaning the surface of all dirt,
15.61.2 dust and foreign matter, sand papering including cost of materials, labour, Sqm
complete as per specifications.
KSRB 15-17.9 : Applying varnish two coats ( excluding priming coat ) on
new wood surface and / or wood based surface undercoating with flatting
varnish and finishing coat with varnish to give an even shade after cleaning
15.62.1 the surface of all dirt, dust and foreign matter, sand papering so as to produce Sqm
smooth dry, mat surface including cost of materials, labour, complete as per
specifications.
KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.10 for applying
every subsequent coat of varnish to produce a smooth dry and mat surface
15.62.2 after cleaning the surface of all dirt, dust and foreign matter, including cost of Sqm
materials, labour, complete as per specifications.
KSRB 15-17.10 : Providing and applying varnishing one coat ( excluding
priming coat ) on previously varnished wood / or wood based surface to give
15.63.1 an even surface after cleaning the surface of all dirt, dust and foreign matter, Sqm
sand papering so as to produce a smooth dry and mat surface, including cost
of materials, labour, complete as per specifications.
KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.10 for applying
every subsequent coat of varnish to produce a smooth dry and mat surface
15.63.2 after cleaning the surface of all dirt, dust and foreign matter, including cost of Sqm
materials, labour, complete as per specifications.
KSRB 15-17.12 : Providing and applying polishing with french polish on new
wood surface and / or wood based surface to give an even surface after
15.64 cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, Sqm
including cost of wood filler and materials, labour, complete as per
specifications.
KSRB 15-17.13 : Providing and applying polishing with french polish over
previously polished wood or wood based surface to give an even surface after
15.65 cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, Sqm
including cost of wood filler and materials, labour, complete as per
specifications.
KSRB 15-17.14 : Providing and applying wax polish in two coats on new
wood surface and / or wood based surface, with bees wax polish in proportion
of 2:1.5:1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by
15.66 weight ) to give an even surface after cleaning the surface of all dirt, dust and Sqm
foreign matter, sand papered smooth, including cost of materials, labour,
complete as per specifications.
KSRB 15-17.15 : Providing and applying wax polish in single coat on new
wood surface and / or wood based surface, with bees wax polish in proportion
of 2:1.5:1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by
15.67 weight ) to give an even surface after cleaning the surface of all dirt, dust and Sqm
foreign matter, sand papered smooth, including cost of materials, labour,
complete as per specifications.
KSRB 15-18.1 : Applying red lead ready mix priming coat over new steel or
other metal surface including preparing the surface after throughly cleaning
15.73 oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine Sqm
steel wool, sand papers including cost of materials, labour, complete as per
specifications.
KSRB 15-18.2 : Providing and applying enamel metal paint two coats
( excluding priming coat ) over new steel or other metal surface brushing to
15.74 give an even shade after cleaning oil, grease, dirt and other foreign matter, Sqm
including cost of materials, labour, complete as per specifications.
KSRB 15-18.3 : Providing and applying enamel metal paint one coat
(excluding priming coat ) on previously painted steel or other metal surface
15.75 brushing to give an even shade after cleaning oil, grease, dirt and other foreign Sqm
matter, including cost of materials, labour, complete as per specifications.
KSRB 15-18.6 : Providing and applying black japan paint one coat (excluding
priming coat ) on previously painted steel or other metal surface brushing to
15.78 give an even shade after cleaning oil, grease, dirt and other foreign matter, Sqm
including cost of materials, labour, complete as per specifications.
KSRB 15-18.7 : Extra for applying every subsequent black japan paint on
previously painted steel or other metal surface brushing to give an even shade
15.79 after cleaning of oil, grease, dirt and other foreign matter, including cost of Sqm
materials, labour, complete as per specifications.
KSRB 15-19.1 : Providing and applying ready mix priming coat over concrete
/ masonry / asbestos cement sheet / plastered surfaces including preparing the
15.80 surface after thoroughly cleaning of oil, grease, dirt and other foreign matter, Sqm
and sand papering including cost of materials, labour, complete as per
specifications.
KSRB 15-20.2 : Providing and applying floor painting with ready mix paint in
one coat ( exluding priming coat ) on new concrete / asbestos cement sheet /
15.84 plastered surfaces brushing to give an even shade after preparing the surface Sqm
after throughly cleaning oil, dirt, dust other foreign matter and sand papering
including cost of materials, labour, complete as per specifications.
KSRB 15-21.1 : Providing and applying wax polish on new concrete floor and
vertical plastered surface using approved brand to give an even shade after
15.85 preparing the surface after thoroughly cleaning oil, dirt, dust other foreign Sqm
matter, including cost of materials, labour, complete as per specifications.
KSRB 15-21.2 : Providing and applying wax polish on new concrete floor and
vertical plastered surface using approved brand to give an even shade after
15.86 preparing the surface after thoroughly cleaning oil, dirt, dust other foreign Sqm
matter, including cost of materials, labour, complete as per specifications.
previously polished concrete floor
KSRB 15-22.1 : Providing marble chips skirting or dado ( upto 30cms height )
rubbed and polished to granolithic finish, top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size dark shade pigment with ordinary cement ( in top layer
only ) laid in cement marble powder 3:1 ( 3 cement : 1 marble powder by
15.87 weight ) in proportion of 4:7 (4 cement marble powder mix : 7 marble chips Sqm
by volume ) overall thickness 24mm (18mm thick under layer, 6mm thick top
layer ) in cement mortar of mix 1:3 including cost of materials, labour,
complete as per specifications.
KSRB 15-22.2 : Providing marble chips skirting or dado ( upto 30cms height )
rubbed and polished to granolithic finish, top layer 6mm thick, with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size, light shade pigment with white cement ( in top layer only )
laid in cement marble powder 3:1 ( 3 cement : 1 marble powder by weight ) in
15.88 proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume ) Sqm
overall thickness 24mm (18mm thick under layer, 6mm thick top layer ) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.
KSRB 15-22.3 : Providing marble chips skirting or dado ( upto 30cms height )
rubbed and polished to granolithic finish top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size, medium shade pigment with approximately 50% white
cement and 50% ordinary cement (in top layer only ) laid in cement marble
15.89 powder 3:1 ( 3 cement :1 marble powder by weight ) in proportion of 4:7 ( 4 Sqm
cement marble powder mix : 7marble chips by volume) overall thickness
24mm ( 18mm thick under layer, 6mm thick top layer ) in cement mortar of
mix 1:3 including cost of materials, labour, complete as per specifications.
KSRB 15-22.4 : Providing marble chips skirting or dado ( upto 30cms height )
rubbed and polished to granolithic finish top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size, white cement without any pigment ( in top layer only ) laid
in cement marble powder 3:1 ( 3 cement : 1 marble powder by weight ) in
15.90 proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume ) Sqm
overall thickness 24mm (18mm thick under layer, 6mm thick top layer ) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.
KSRB 15-22.5 : Extra labour for work in dado exceeding 30 cms in height
15.91 Sqm
including cost of labour, complete as per specifications.
KSRB 15-23.1 : Providing pre-cast grey colour mosaic tiles 20mm thick with
marble chips of white, black, chocolate, grey, yellow or baroda green from
smallest to 6mm nominal size, with ordinary cement ( in top layer only ) for
skirting and rises of steps ( not exceeding 30cms height) on 10cms thick
15.92 M
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.
KSRB 15-23.2 : Providing pre-cast mosaic tiles using light shade pigment
with white cement 20mm thick with marble chips of white, black, chocolate,
grey, yellow or baroda green from smallest to 6mm nominal size, with
ordinary cement ( in top layer only ) for skirting and rises of steps ( not
15.93 M
exceeding 30cms height ) on 10cms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost of
materials, labour, complete as per specifications.
KSRB 15-23.3 : Providing pre-cast mosaic tiles using medium shade pigment
using approximately 50% white cement and 50% ordinary cement 20mm thick
with marble chips of white, black, chocolate, grey, yellow or baroda green
from smallest to 6mm nominal size, with ordinary cement ( in top layer only )
15.94 for skirting and rises of steps ( not exceeding 30cms height ) on 10cms thick M
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.
KSRB 15-23.4 : Providing pre-cast mosaic tiles of white shade with white
cement without any pigment 20mm thick with marble chips of white, black,
chocolate, grey, yellow or baroda green from smallest to 6mm nominal size,
with ordinary cement ( in top layer only ) for skirting and rises of steps ( not
15.95 M
exceeding 30cms height ) on 10cms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost of
materials, labour, complete as per specifications.
Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
15.100.2 per bag of cement in both coats of the plaster. Harbourite 12mm long shall be Sqm
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:3 , 12mm thick
Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
15.100.3 per bag of cement in both coats of the plaster. Harbourite 12mm long shall be Sqm
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:4 , 20mm thick
Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
15.100.4 per bag of cement in both coats of the plaster. Harbourite 12mm long shall be Sqm
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:4 , 12mm thick
Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
15.100.5 per bag of cement in both coats of the plaster. Harbourite 12mm long shall be Sqm
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:6 , 20mm thick
Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
15.100.6 per bag of cement in both coats of the plaster. Harbourite 12mm long shall be Sqm
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:6, 12mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.1 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:3, 20mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.2 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:3, 12mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.3 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:4, 20mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.4 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:4, 12mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.5 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:6, 20mm thick
Providing and mixing fibermesh stealth micro blocker anti microbial multi
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient
built in to the polymer structure of the fiber itself during manufacturing
process.It should prevent the growth of micro organisms like bacteria, mold
15.101.6 fungus, mildew etc. on concrete surfaces. Application top of plaster to be Sqm
mixed in mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3,
175 gm for CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker
shall confirm to ASTM C-1116 type 111 4.1.3. - for CM 1:6, 12mm thick
Providing external walls with texture finish using approved brand paint,
applied uniformly in three coats over one coat of primer including cost of all
15.103 materials, machineries, labour, transportation, loading and unloading, all lead Sqm
and lift and all other incidental charges including scaffolding and removing
stains, complete as per specifications.
Providing and finishing external walls in two coats over one coat of primer
with antifungal paint of approved brand and shade to give an even shade after
15.104 thoroughly brooming the surface to remove all dirt and loose powdered Sqm
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
Providing textured paint of approved quality, colour and shade to wall surface
after cleaning and rubbing the wall surface with wire brush of medium size
emery stone to remove all the loosely adhering particles, the surface is then
cleaned with water and ensured that it is in line and level. The textured
material is then mixed with 40-50% of clean water until a homogeneous thick
slurry is formed, the slurry is left for 5-10 min, to react completely with
ingredients. The textured finish prepared as above is then applied to the wall
15.105 Sqm
surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired
finish. The finished surface shall be applied with two coats of exterior apex
paint of approved shade. The rate includes providing and removing
scaffolding, all lead and lift and all other incidental charges etc., complete as
per directions of the Engineer-in-charge of the work.
Providing applying two coats of wall putty to inside plastered walls and
ceiling using white cement putty. Scrapping and levelling the surface using
steel blade and preparing the surface even and smooth by using different grade
15.106 sand papers, including cost of all materials, cost of labour and scaffolding etc., Sqm
complete as per the specification. Area to be considered - (a) 100% for fresh
surface (b) Upto 10% for repainting
Repairs to Buildings
KSRB 24-1 : Removing white wash or colour wash by steel brushing and / or
scraping, sand papering and preparing wall surface smooth including repairs
16.1.1 to scraches, cost of labour, complete as per specifications. Specification Sqm
No.KBS
KSRB 24-2 : Extra for removing white wash or colour wash by steel brushing
and / or scraping, sand papering the ceiling and / or sloping roof surface
16.1.2 smooth including repairs to scraches, cost of labour, complete as per Sqm
specifications.
KSRB 24-3 : Extra for washing the wall surface spoiled by smoke, soot, with
16.1.3 clear water before sand papering the surface smooth including necessary Sqm
repairs to scraches, cost of labour, complete as per specifications.
KSRB 24-4 : Extra for Item No. 24-3 washing the ceiling and / or sloping roof
surface spoiled by smoke soot with clear water before sand papering the
16.1.4 surface smooth and including necessary repairs to scraches, cost of labour, Sqm
complete as per specifications.
KSRB 24-5 : Cleaning and washing of decorated wall surface with soap, soda
16.2.1 and water including cost of materials, labour, complete as per specifications. Sqm
Specification No.KBS
KSRB 24-6 : Extra for KSRB 24-5 cleaning and washing the old ceiling and /
16.2.2 or sloping roof with soap, soda and water including cost of materials, labour, Sqm
complete as per specifications.
KSRB 24-7 : Cleaning and washing the old plastered wall surface with soap,
16.3.1 soda, water including cost of materials, labour, complete as per specifications. Sqm
KSRB 24-8 : Extra for Item No. 24-7 cleaning and washing the old plastered
16.3.2 ceiling and / or sloping roof surface with soap, soda, water including cost of Sqm
materials, labour, complete as per specifications.
KSRB 24-9 : Cleaning and washing of stone masonry wall surface with nitric
16.4 acid including cost of materials, labour, complete as per specifications. Sqm
Specification No.KBS
KSRB 24-10 : Removing the old paint or polish from wood and / or wood
based surface with paint remover of approved brand / manufacturer and
16.5 making surface even including cost of materials, labour, complete as per Sqm
specifications. Specification No.KBS
KSRB 24-11 : Removing the old paint or polish from wood and / or wood
based surface with caustic soda solution and making surface even including
16.6 cost of materials, labour, complete as per specifications. Specification Sqm
No.KBS
KSRB 24-12 : Removing the old paint from wood and / or wood based surface
16.7 with blow lamp and making surface even including cost of materials, labour, Sqm
complete as per specifications. Specification No.KBS
KSRB 24-13 : Removing the old paint from steel and / or other metal surface
16.8 with hand scraping and making surface even including cost of labour, Sqm
complete as per specifications. Specification No.KBS
KSRB 24-14 : Removing the old paint from steel and / or other metal surface
16.9 with flame cleaning and making surface even including cost of material, Sqm
labour, complete as per specifications. Specification No.KBS
KSRB 24-15 : Removing the old paint from steel and / or other metal surface
with paint remover of approved brand / manufacturer cleaning and making
16.10 surface even including cost of material, labour, complete as per specifications. Sqm
Specification No.KBS
KSRB 24-16 : Fixing small pieces ( not exceeding 0.015 cum ) for making
good wherever hinges etc., have been removed from frames or joinery etc.,
16.11 with teak wood excluding cost of materials but including cost of labour, Piece
complete as per specifications. Specification No.KBS
KSRB 24-17 : Providing and fixing small pieces ( not exceeding 0.015 cum )
for making good wherever hinges etc., have been removed from frames or
16.12 joinery etc., with honne wood including cost of materials, labour, complete as Piece
per specifications. Specification No.KBS
KSRB 24-18 :Providing and fixing small pieces ( not exceeding 0.015 cum )
for making good wherever hinges etc., have been removed from frames or
16.13 joinery etc., with matti / nandi wood including cost of materials, labour, Piece
complete as per specifications. Specification No.KBS
KSRB 24-19 : Providing and fixing small pieces ( not exceeding 0.015 cum )
for making good wherever hinges etc., have been removed from frames or
16.14 joinery etc., with Sal wood pieces ( not exceeding 0.015 cum ) including cost Piece
of materials, labour, complete as per specifications. Specification No.KBS
KSRB 24-20 : Renewing bars, styles and rails, straight for joinery upto 50mm
thick including mitres, haunching, mortices etc., and removing the old
16.15 defective pieces and replacing with Teak wood including cost of materials, Piece
labour, complete as per specifications. Specification No.KBS
KSRB 24-21 :Renewing bars, styles and rails, straight for joinery upto 50mm
thick including mitres, haunching, mortices etc., and removing the old
16.16 defective pieces and replacing with Honne wood including cost of materials, Piece
labour, complete as per specifications. Specification No.KBS
KSRB 24-22 : Renewing bars, styles and rails, straight for joinery upto 50mm
thick including mitres, haunching, mortices etc., and removing the old
16.17 defective pieces and replacing with Matti / Nandi woodincluding cost of Piece
materials, labour, complete as per specifications. Specification No.KBS
KSRB 24-23 : Rewedging, cramping joinery of any description with new
wedges in glue or white lead and repinning including rehanging or refixing of
16.18 shutters, hinges or pivots, not exceeding one sqm per leaf, removing or Leaf
dismantling excluding cost of wood but including cost of labour, complete as
per specifications. Specification No.KBS
KSRB 24-24 :Rewedging, cramping joinery of any description with new
wedges in glue or white lead and repinning including rehanging or refixing of
shutters, hinges or pivots, not exceeding one sqm per leaf, removing or
16.19 dismantling excluding cost of wood but including cost of labour, complete as Leaf
per specifications. Specification No.KBS exceeding one sqm but not
exceeding two sqm per leaf
KSRB 24-33 : Supplying and fixing new teak wood beads wherever necessary
16.28 including cost of materials, labour, complete as per specifications. M
Specification No.KBS
KSRB 24-34 : Supplying and fixing new Honne wood beads wherever
16.29 necessary including cost of materials, labour, complete as per specifications. M
Specification No.KBS
KSRB 24-35 : Renewal of old putty of glass panes including cost of materials,
16.30 labour, complete as per specifications. Specification No.KBS 24.2.6 M
KSRB 24-36 : Removing the glazed tiles in patches in area exceeding 10 tiles
and not exceeding 5 sqm including removing old tiles preparing surfaces and
16.31 laying or setting new or old tiles complete including cost of materials, Sqm
( excluding cost of tiles ) labour, complete as per specifications. Specification
No.KBS
KSRB 24-37 : Removing the mosaic tiles in patches in area exceeding 10 tiles
and not exceeding 5 sqm including removing old tiles preparing surfaces and
16.32 laying or setting new or old tiles complete including cost of materials, Sqm
( excluding cost of tiles ) labour, complete as per specifications. Specification
No.KBS
KSRB 24-38 : Cutting out cracks of roof terrace to V - section cleaning out,
wetting, grouting with cement and sand slurry 1:3 (1 cement, 3 sand)
16.33 including cost of materials, labour, complete as per specifications. M
Specification No.KBS
KSRB 24-39 : Cutting out cracks of roof terrace to V - section cleaning out
and filling solidly with a hot mixure of bitumen and clean dry sand 1:1 by
16.34 weight including cost of materials, labour, complete as per specifications. Sqm
Specification No.KBS
KSRB 24-40 : Dubbing out on old irregular walls average 10mm thick and
making good the surface with cement mortar 1:3 including curing cost of
16.35.1 materials, labour, complete as per specifications. Specification No.KBS 24.2.1 Sqm
KSRB 24-43 : Add from Item no. 24-40 for every 5mm thick increase after
16.35.2 10mm with respective mortars including curing cost of materials, labour, Sqm
complete as per specifications.
KSRB 24-41 : Dubbing out on old irregular walls average 10mm thick and
making good the surface with cement mortar 1:4 including curing cost of
16.36.1 materials, labour, complete as per specifications. Specification No.KBS 24.2.1 Sqm
KSRB 24-43 : Add from Item no. 24-40, 24-41, 24-42 for every 5mm thick
16.36.2 increase after 10mm with respective mortars including curing cost of Sqm
materials, labour, complete as per specifications.
KSRB 24-42 : Dubbing out on old irregular walls average 10mm thick and
making good the surface with cement mortar 1:6 including curing cost of
16.37.1 materials, labour, complete as per specifications. Specification No.KBS 24.2.1 Sqm
KSRB 24-43 : Add from Item no. 24-40, 24-41, 24-42 for every 5mm thick
16.37.2 increase after 10mm with respective mortars including curing cost of Sqm
materials, labour, complete as per specifications.
KSRB 24-44 : Repairs to plaster in patches of 2.5 sqm and less in walls,
ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches
16.38 in proper shape and replastering the surface of the wall including disposal of Sqm
rubbish with a lead of 50m including curing cost of materials, labour,
complete as per specifications. Specification No.KBS 24.2.1
KSRB 24-45 : Repairs to plaster in patches of 2.5 sqm and less in walls,
ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches
16.39 in proper shape and replastering the surface of the wall including disposal of Sqm
rubbish with a lead of 50m including curing cost of materials, labour,
complete as per specifications. Specification No.KBS 24.2.1
KSRB 24-46 : Repairs to plaster in patches of 2.5 sqm and less in walls,
ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches
16.40 in proper shape and replastering the surface of the wall including disposal of Sqm
rubbish with a lead of 50m including curing cost of materials, labour,
complete as per specifications. Specification No.KBS 24.2.1
Removing of existing old or broken wash basin / urinals and disposing it with
all cost and conveyance labour for all items of work, HOM of equipment with
16.41 all lead and lift, loading and unloading, transportation charges and all other Each
incidental charges etc., complete as per specification and directions of the
Engineer-in-charge of the work.
Cleaning stone parapets removing of dirt dust etc., using suitrable soap
powder, coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes,
16.45 plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe Sqm
etc., complete including cost of water charges and electrical charges.
Cleaning Quadrangle chajjas including removing of dirt dust etc., using
suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber
16.46 brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable Sqm
arrangement, hose pipe etc., complete excluding water charges including
electrical charges and all safety measures.
Cleaning sub surface drains including removing of dirt dust etc., using
suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber
16.47 brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable M
arrangement, hose pipe etc., complete
Cleaning surface drains including removing of dirt dust etc., using suitrable
soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir
16.48 brushes, plastric brushjes, mugs, booster pumps with portable arrangement, M
hose pipe etc., complete.
Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage
units, furnitures,electrical & electronic equipments, doors, windows, curtains,
blinds etc., including cleaning of dust, etc., using suitable bombay broom
16.49 stick, squezers / wipers/rubber brushes, mop sticks, coir brushes, bamboo Sqm
baskets, plastic buckets, trolleys, wiping cloths, carry bags, etc.,removing the
debris to the nearest garbage pit complete.
KSRRB 200-9. Clearing and grubbing road land including uprooting rank
vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, by
18.12 manual means, in area of thorney jungle, removal of stumps, disposal of Sqm
unserviceable materials, stacking of serviceable materials labour charges
complete as per specifications. MORTH / Chapter 2
18.33 Tonne
KSRRB M200-17.2. Dismantling of existing structures like culverts, bridges,
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
18.34 Tonne
stacking the serviceable material with all lifts complete as per specifications.
v)Steel work in all types of Sections upto a Height of 5 m above plinth level
excluding Cutting of Rivet
Dismantling of existing structures like culverts, bridges, retaining walls and
other structure comprising of masonry, cement concrete, wood work, steel
work, including T&P and scaffolding wherever necessary, sorting the
18.35 dismantled material, disposal of unserviceable material and stacking the RIVET
serviceable material with all lifts complete as per specifications. B for cutting
rivets.
Earth Work,
Erosion Control and
Drainage
Item Code Item Description Unit
KSRRB 300 - Excavation for road, drains and similar works KSRRB 300-1.
Earthwork excavation by manual means in ordinary soil involving an average
horizontal throw upto 2 meters and an average lift upto 0.5 m, excavated
19.1 surface leveled and sides neatly dressed, the disposed earth to be leveled cum
neatly after breaking of clods complete as per specifications. MORTH /
Chapter 3
KSRRB 300-5. Excavation in soft rock with blasting for formation of roads
including stacking neatly, to uniform line and level including cost of
19.5 explosives, labour, HOM of machineries and equipments complete as per cum
specifications. (with all lead and lift) MORTH / Chapter 3
KSRRB 300-6. Excavation in soft rock I ordinary rock without blasting for
formation of roads including stacking neatly, to uniform line and level with an
19.6 initial lead upto 15m. including cost of all labour, equipments, complete as per cum
specifications.
KSRRB 300-7. Excavation in hard rock by blasting for formation of roads
including stacking to uniform line and level as directed by the engineer
19.7 including cost of explosives, labour, HOM complete as per specifications. cum
(with all lead and lift) MORTH I Chapter 3
KSRRB 300-8. Excavation in hard rock by chiselling and I or wedging where
blasting is prohibited for formation of roads including stacking to uniform line
19.8 and level including cost of all labour complete as per specifications. (with all cum
lead and lift) MORTH I Chapter 3
KSRRB M300-13. Excavation for roadway in hard rock (requiring blasting)
by drilling, blasting and breaking, trimming of bottom and side slopes in
accordance with requirements of lines, grades and cross sections, loading and
19.13 stacking at site of cut road with a lead of 1.00 km and complete as per cum
specifications. (Excavated rock credited to contractor) MORTH Specification
No. 301
KSRRB M300-17. Excavation for road way in hard rock ( controlled blasting)
with rock breakers including breaking rock, loading to tippers transporting and
19.18 stacking at site and trimming bottom and side slopes in accordance with cum
requirement of lines, grades and cross sections complete as per specifications.
MORTH Specification No. 301
KSRRB M300-18. Earth work Excavation for road way in marshy soil by
mechanical means including loading to tippers and disposing with a lead of
19.19 1.00 km including the cost of equipments, machineries, labour etc. complete cum
as per specifications.
KSRRB M300-19. Removal of unserviceable soil including excavation,
loading and disposal but excluding replacement by suitable soil which shall be
19.20 paid separately as per clause 300.5 complete as per specifications. MORTH cum
Specification No. 301
KSRRB 300-26.1. Extra for every additional lead of 7.50 mtr. beyond 15m
but upto 60m by manual means for all kinds of soils except hard rock
19.30 including cost of all labour complete as per specifications. MORTH Chapter 3 cum
KSRRB 300-26.2. When lead is more than 60m upto 500m by any means of
conveyance including loading and unloading for all kinds of soils except hard
19.31 rock including cost of all labour complete as per specifications. MORTH cum
Chapter 3
KSRRB 300-28. Box cutting I trenching the sub grade to proper slope, camber
and removing inequalities including removing the stuff and depositing on the
19.33 road side slopes (cutting of earthwork shall be paid seperately in the respective Sqm
item on the basis of classification of the excavation) including cost of all
labour complete as per specifications. MORTH Chapter 3
KSRRB 300-51. Making 50mm x 50mm furrows at 450 to the centre line of
the road and at one metre interval in the existing thin bituminous wearing
19.57 course including sweeping, taking out old materials, stacking the debris cost Sqm
of all labour charges complete as per specifications. MORTH / Chapter 3
KSRRB M300- Scarifying Existing Granular Surface to a Depth of 50mm by
Manual Means. KSRRB M300-52.1. Scarifying the existing granular road
19.58 surface to a depth of 50mm and disposal of scarified material and complete as Sqm
per specifications. MORTH Specification No. 305.4.3
KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of
50mm by Mechanical Means. Scarifying the existing bituminous road surface
19.59 to a depth of 50mm and disposal of scarified material and complete as per Sqm
specifications. MORTH Specification No. 305.4.3
KSRRB M300- Construction of Embankment with Material Gravel/ Murrum.
KSRRB M300-53. Construction of embankment with approved material
Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading
to required slope and compacting to meet requirement Table 300- 2 complete
19.60 cum
as per specifications.(Including cost of gravel / murrum, watering charges &
compaction by vibratory roller to 95% of proctors density) MORTH
Specification No. 305
KSRRB 300-61. Extra for laying earth by manual means as per specifications
for compaction in 250mm thick loose layers when laying of earth in layers is
19.68 done from stacked materials including breaking of clods and dressing but cum
excluding rolling and watering including cost of all labour complete as per
specifications. MORTH / Chapter 3
KSRRB 300-64.1. Extra for watering the earth to bring the earth upto required
19.71 optimum moisture content manually including cost of all labour complete as cum
per specifications. MORTH / Chapter 3
KSRRB 300-64.2. Extra for watering the earth to bring the earth upto required
optimum moisture content with mechinery including cost of all labour, HOM
19.72 of machineries complete as per specifications. MORTH / Chapter 3 cum
KSRRB 300-65. Extra for rolling to specification with the use of vibratory
roller when earth is at suitable moisture content with desired field density not
19.73 less than 95% of maximum dry density ( modified heavy proctor test ) cum
including HOM of machineries complete as per specifications. MORTH /
Chapter 3
KSRRB M300-2.2. Grassing with Doobs grass KSRRB M300- 2.1. Grassing
with Doobs grass including watering and maintenance of the lawn for 30 days
or more till the grass forms a thick lawn free from weeds and fit for moving
19.79 including supplying good earth if needed complete as per specifications. Sqm
MORTH Specification No. 307 ii) In rows 7.5 cm apart in either direction
19.80 KSRRB M300-Making lawns including ploughing and dradding with Sqm
KSRRB M300- Maintenance of lawns or Turfing KSRRB M300-
4.Maintenance of lawns or Turfing of slopes (rough grassing) for a period of
19.81 one year including watering etc complete as per specifications. MORTH Sqm
Specification No. 307
KSRRB M300-Turfing lawns with fine grassing including ploughing, dressing
KSRRB M300-5. Turfing lawns with fine grassing including ploughing,
dressing including breaking of clods, removal of rubbish, dressing and
19.82 supplying doobs grass roots at 10 cm apart, including supplying and spreading Sqm
of farm yard manure at rate of 0.6 cum per 100 sqm complete as per
specifications. MORTH Specification No. 307
KSRRB M300- Maintenance of lawns with fine grassing for the first year
KSRRB M300-6. Maintenance of lawns with fine grassing for the first year
19.83 including watering etc complete as per specifications. MORTH Specification Sqm
No. 307
KSRRB M300- Planting and maintenance permanent hedges KSRRB M300-
7.1. Planting permanent hedges including digging of trenches, 60 cm wide and
45 cm deep, refilling the excavated earth mixed with farmyard manure,
supplied at the rate of 4.65 cum per 100 metres and supplying and planting
19.84 M
hedge plants at 30 cm apart complete as per specifications. A) Planting
permanent hedges including digging of trenches MORTH Specification No.
307
19.85 M
KSRRB M300- Planting and Maintaining of Flowering Plants and Shrubs
KSRRB M300- 8.1. Planting and Maintaining of Flowering Plants and Shrubs
19.86 - A) Planting flowring plants and shrubs in central verge MORTH M
Specification No. 307
KSRRB M300- 8.2. Planting and Maintaining of Flowering Plants and Shrubs
KSRRB M300- 8.1. Planting and Maintaining of Flowering Plants and Shrubs
19.87 B) Maintenance of flowering plants and shrubs in central verge for one year. Km
KSRRB M300- Planting of trees and their maintenance for one year KSRRB
M300-9. Planting of trees by the road side (Avenue trees) in 0.60 m dia holes,
1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge
19.88 manure, planting the saplings, backfilling the trench, watering, fixing the tree Each
guard and maintaining the plants for one year complete as per specifications.
MORTH Specification No. 307
KSRRB M300-Supply at site of work well decayed farm yard manure KSRRB
M300-11. Supply at site of work well decayed farm yard manure, from any
19.90 available source, approved by the engineer in charge including screening and cum
stackin complete as per specifications. MORTH Specification No. 308.2
KSRRB M300-Edging with 2nd class bricks, laid dry lengthwise KSRRB
M300-15. Edging with 2nd class bricks, laid dry lengthwise, including
19.94 excavation, refilling, consolidation, with a hand packing and spreading nearly M
surplus earth within a lead of 50 metres complete as per specifications.
KSRRB M300- Making tree guard from empty bitumen drums KSRRB
M300-16. Making tree guard 53 cm dia and 1.3 m high as per design from
empty bitumen drum, slit suitably to permit sun and air, (supplied by the
19.95 department at stock issue rate) including providing and fixing 2 nos MS sheet Each
rings 50 x 0.5 mm with rivets, complete in all respect complete as per
specifications.
KSRRB M300-17. Making tree guard 53 cm dia and 2 metres high as per
design from empty bitumen drums, slit suitably to permit sun and air,
(supplied by the department at stock issue rate) including providing and fixing
19.96 four legs 40 cm long of 30 x 3 mm MS riveted to tree guard and providing and Each
fixing 2 nos. MS sheet rings 50 x 0.5 mm with rivets complete in all respects
complete as per specifications.
KSRRB M300- Wrought iron and mild steel welded work KSRRB M300-18.
Wrought iron and mild steel welded work (using angles, square bars, tees and
channel grills, grating frames, gates and tree guards of any size and design etc.
19.97 including cost of screens and welding rods or bolts and nuts complete fixed in Quintal
position but without the cost of excavation and concrete for fixing which will
be paid separately complete as per specifications.
KSRRB M300-Tree gaurd with MS Angle and Steel wire KSRRB M300-20.
Providing and fixing tree gaurd 0.60 metre square, 2.00 metre high fabricated
19.100 with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3 mm and steel wire 3 mm Each
dia welded and fabricated as per design in two halves bolted together complete
as per specifications
Sub Bases-Bases
(Non bituminous)
and Shoulders
(Non bituminous)
and Shoulders
KSRRB M400- Lime Treated Soil for Sub-Base KSRRB M400-9. Providing,
laying and spreading soil on a prepared subgrade, pulverising, mixing the
spread soil in place with rotavator with 3% slaked lime with minimum content
of 70 per cent of CaO, grading with motor grader and compacting with the
20.9 cum
road roller at OMC to achieve atleast 98% of the maximum dry density to
form a layer of sub-base complete as per specifications. MORTH
Specification No. 402
KSRRB M400- Penetration Coat over top layer of crushed cement concrete
base KSRRB M400-16. Spraying of bitumen over cleaned dry surface of
crushed cement concrete base at the rate of 25 kg per 10 sqm by a bitumen
pressure distributor, spreading of key aggregates at the rate of 0.13 cum per 10
20.17 Sqm
sqm by a mechanical gritter and rolling the surface as per Clause 500.6.3.8
complete as per specifications MORTH Specification No. 405.2
KSRRB 500-1. Cleaning the existing WBM road surface including removing
of binding materials and other foreign matter with wire brushes and small
picks, sweeping with brooms or soft brushes and finally dusting with old
21.1 gunny bags and / or compressed air, to receive bituminous treatment including Sqm
cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH specification clause 501
KSRRB 500-2. Cleaning the existing black topped surface with brooms, soft
brushes and finally dusting with old gunny bags and / or compressed air to
21.2 receive bituminous treatment including cost of all materials, labour, HOM of Sqm
machineries complete as per specifications. MORTH specification clause 501
KSRRB 500-3. Scarifying existing stone metal layer upto 75mm thick along
with their bituminous surface, picking up scarified materials and stacking of
old serviceable materials with lead of 100 m. sequential spreading of the
salvaged aggregates with fresh aggregates on prepared base and consolidating
21.3 Sqm
as per water bound macadam specifications including cost of all labour, HOM
of machineries complete as per specifications. MORTH specification clause
501
KSRRB 500-4 Providing and applying primer coat for surfaces of medium
porosity like cement stabilized soil base@ 0.90kglsqm over prepared surface
21.5 with S.S bitumen emulsion using bitumen tanker fitted with spray set Sqm
(excluding cleaning of road surface) including cost of all material, labour,
HOM complete as per specifications. Clause 501 of MORTH V revision
KSRRB M500-6. Providing and applying primer coat with S.S. bitumen
emulsion on prepared surface of granular base such as WMM including
21.6 cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using Sqm
mechanical means complete as per specifications. MORTH Specification No.
502
KSRRB 500-7. Providing and applying tack coat using 80/100 grade
bitumen(VG10) on the prepared black topped surfaces at 2.5 kg per 10 sqm,
21.7 heating bitumen in boiler fitted with spray set (excluding cleaning of road Sqm
surface) including cost of all materials, labour, HOM of machineries complete
as per specifications. MORTH/Chapter 5
KSRRB 500-9. Providing and applying tack coat using 80/100 grade bitumen
(VG10) on granular base such as WBM surfaces hot bitumen primed at 4 kg
21.9 per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning Sqm
of road surface) including cost of all materials, labour, HOM of machineries
complete as per specifications. MORTH / Chapter 5
KSRRB M500-10. Providing and applying tack coat using 80/100 grade
bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.25 kg
21.10 per sqm on the existing prepared bituminous surface cleaned with mchancial Sqm
broom. complete as per specifications. - using bitumen 80/100 on primed
surfaces
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the
21.11.1 required level and grade, rolling by power roller to achieve the desired cum
density, but excluding cost of primer / tack coat including lead, lift and cost of
all materials, labour, HOM of machineries complete as per specifications.
MORTH /Chapter 5 - using 120 TPH capacity H.M.P. with sensor paver Gr-1
(80 mm to 100mm) with 3.3 % VG-30 Bitumen
KSRRB 500-22. Providing and laying single coat surface dressing or first coat
of the two surface dressing with 0.15 cum/10 sqm crushed stone chippings
passing 19mm & retained on 13.20mm sieve as per Table 500-21and bitumen
12 kg / 10 sqm of VG-10 (80/100) as wearing course consisting of a layer of
bituminous binder laid on the prepared surface followed by cover of crushed
21.26 stone chippings of specified size (may be pre-coated also) and rolling with Sqm
power roller 8-10 tonne capacity including cost of all materials, labour, HOM
of machineries complete as per specifications. MORTHclause No.510
KSRRB 500-23. Providing and laying second coat surface dressing with 0.10
cum/10 sqm crushed stone chippings passing 13.2mm & retained on 9.50mm
sieve as per Table 500-21and bitumen 10 kg / 10 sqm of VG-10 (80/100) as
wearing course consisting of a layer of bituminous binder laid on the prepared
21.27 surface followed by cover of crushed stone chippings of specified size (may Sqm
be pre-coated also) and rolling with power roller 8-10 tonne capacity
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTHclause No.510
KSRRB 500-27. Providing and laying open graded premix carpet of 20mm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
21.32 laying manually and rolling with power roller 8-10 tonne, excluding cost of Sqm
tack coat, including cost of all materials, labour, HOM of machineries
complete as per specifications using VG 10 (80/100) grade. MORTH clause
No.511/Chapter 5
KSRRB 500-28. Providing and laying open graded premix carpet of 20mm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
21.33 laying manually and rolling with power roller 8-10 tonne, excluding cost of Sqm
tack coat, including cost of all materials, labour, HOM of machineries
complete as per specifications using VG 10 (80/100) grade. MORTH clause
No.511/Chapter 5.- (Using CRMB 55 grade)
KSRRB 500-30. Providing and laying 20 mm thick mix seal surfacing Type A
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with
bituminous binder at 2.15kg/sqm, in hotmix plant 40/60 tonne, transporting
the mixed materials in tipper and laying with machanical paver finisher to
21.36 required level and grade, rolling w ith power roller 8-10 tonne, excluding cost Sqm
of tack coat including cost of all materials, labour, HOM complete as per
specifications using VG-30 (To be used where the annual rainfall is more than
150 ems) Clause 508 of MORTH V revision IRC-SP-53-2010
KSRRB 500-31. Providing and laying 20 mm thick mix seal surfacing Type A
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with
bituminous binder at 2.15kg/sqm, in hotmix plant 40/60 tonne, transporting
the mixed materials in tipper and laying with machanical paver finisher to
21.37 required level and grade, rolling w ith power roller 8-10 tonne, excluding cost Sqm
of tack coat including cost of all materials, labour, HOM complete as per
specifications using VG-30 (To be used where the annual rainfall is more than
150 ems) Clause 508 of MORTH V revision IRC-SP-53-2010 using CRMB
55 grade bitumen
KSRRB 500-32. Providing and laying 20 mm thick mix seal surfacing Type-B
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
mixed materials in tipper and laying with mechanical paver finisher to
21.38 required level and grade, rolling with power roller 8-10 tonne, excluding cost Sqm
of tack coat including cost of all materials, labour, HOM complete as per
specifications using VG-30 (To be used where the annual rainfall is less than
150 ems) Clause 508 of MORTH V revision IRC-SP-53-2010
KSRRB 500-33. Providing and laying 20 mm thick mix seal surfacing Type-B
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
mixed materials in tipper and laying with mechanical paver finisher to
21.39 required level and grade, rolling with power roller 8-10 tonne, excluding cost Sqm
of tack coat including cost of all materials, labour, HOM complete as per
specifications using VG-30 (To be used where the annual rainfall is less than
150 ems) Clause 508 of MORTH V revision IRC-SP-53-2010 using CRMB
55 grade bitumen
KSRRB 500-34. Providing and laying 20 mm thick mix seal surfacing Type A
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
manually and rolling with power roller 8-10 tonne excluding cost of tack coat
21.40 including cost of all materials, labour, HOM of machineries complete as per Sqm
specifications. MORTH clause No.512 - using VG-30 (60/70) bitumen (60/70
grade to be used where the annual rainfall is more than 150 ems) Clause 508
of MORTH V revision IRC-SP-53-2010
KSRRB 500-35. Providing and laying 20 mm thick mix seal surfacing Type A
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
21.41 manually and rolling with power roller 8-10 tonne excluding cost of tack coat Sqm
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH clause No.512 - - using CRMB 55 grade Bitumen
21.42 KSRRB 500-36. Providing and laying 20 mm thick mix seal surfacing Type Sqm
21.43 KSRRB 500-37. Providing and laying 20 mm thick mix seal surfacing Type Sqm
KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing
the voids on Bituminous surface, laid to the specified levels, grade and cross
fall manually and rolling with power roller 8 - 10 tonne capacity including
cost of all materials, labour, HOM of machinery complete as per the
21.45.1 Sqm
specifications. MORTH Specification No. 513 - TYPE A - using graded
aggregates 6.7mm and down size at 0.009 cum/sqm with bitumen binder VG-
10 (80/100 grade) at 0.98 kg/sqm.
KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing
the voids on Bituminous surface, laid to the specified levels, grade and cross
fall manually and rolling with power roller 8 - 10 tonne capacity including
cost of all materials, labour, HOM of machinery complete as per the
21.45.2 Sqm
specifications. MORTH Specification No. 513 -TYPE B - using graded
aggregates 2.36mm and down size at 0.006 cum/sqm with bitumen binder
VG-10 (80/100 grade) at 0.68 kg/sqm.
KSRRB M500-56.2. Providing and laying slurry seal@ 9.10 kg/sqm (Residual
binder@ 10.50% by wt of dry aggregate) consisting of a mixture of fine
aggregates, portland cement filler, bituminous emulsion and water on a road
surface including cleaning of surface, mixing of slurry seal in a suitable
21.65 Sqm
mobile plant, laying and compacting to provide even riding surface Complete
as per specifications. Type II : 4-6 mm width hair cracks. Clause 512 of
MORTH V revision
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.1 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 120 TPH capacity Asphalt batch mix plant with
sensor paver grading I (50-65mm) with 5.2% of modified bituminous binder
consisting of 4.78% of VG-10 bitumen (80/100 grade) and 0.42% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.2 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 120 TPH capacity Asphalt batch mix plant with
sensor paver grading II (30-45mm) with 5.4% of modified bituminous binder
consisting of 4.97% of VG-10 bitumen (80/100 grade) and 0.43% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.3 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with sensor paver
grading I (50-65mm) with 5.2% of modified bituminous binder consisting of
4.78% of VG-10 bitumen (80/100 grade) and 0.42% of plastomeric
thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.4 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with sensor paver
grading II (30-45mm) with 5.4% of modified bituminous binder consisting of
4.97% of VG-10 bitumen (80/100 grade) and 0.43% of plastomeric
thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.5 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with mechanical sensor
paver grading I (50-65mm) with 5.2% of modified bituminous binder
consisting of 4.78% of VG-10 bitumen (80/100 grade) and 0.42% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.6 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with mechanical sensor
paver grading I (50-65mm) with 5.2% of modified bituminous binder
consisting of 4.78% of VG-10 bitumen (80/100 grade) and 0.42% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.7 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 120 TPH capacity Asphalt batch mix plant with
sensor paver grading I (50-65mm) with 5.2% of modified bituminous binder
consisting of 4.78% of VG-30 bitumen (60/70 grade) and 0.42% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.8 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 120 TPH capacity Asphalt batch mix plant with
sensor paver grading II (30-45mm) with 5.4% of modified bituminous binder
consisting of 4.97% of VG-30 bitumen (60/70 grade) and 0.43% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.9 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with sensor paver
grading I (50-65mm) with 5.2% of modified bituminous binder consisting of
4.78% of VG-30 bitumen (60/70 grade) and 0.42% of plastomeric
thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.10 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with sensor paver
grading II (30-45mm) with 5.4% of modified bituminous binder consisting of
4.97% of VG-30 bitumen (60/70 grade) and 0.43% of plastomeric
thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.11 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with mechanical sensor
paver grading I (50-65mm) with 5.2% of modified bituminous binder
consisting of 4.78% of VG-30 bitumen (60/70 grade) and 0.42% of
plastomeric thermoplastics (waste plastic)
Providing and laying bituminous concrete 40mm thick with hot mix plant,
using crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction in all
21.78.12 respects complete as per specifications. Clause 507 of MORTH V revision as cum
per IRC SP-53-2015. using 40-60 TPH capacity HMP with mechanical paver
grading II (30-45mm) with 5.4% of modified bituminous binder consisting of
4.97% of VG-30 bitumen (60/70 grade) and 0.43% of plastomeric
thermoplastics (waste plastic)
Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision:
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates
of specified grading (as per section 515 of MORTH 5th Revision): premixed
with modified bituminous binder containing Pelletized Cellous fibre at 0.3%
(on loose fibre basis) on the weight of total mix in the batch and
filler(Hydrated lime dust @ 2% of weight of aggregates, transporting the hot
mix to work site, Laying with a paver finisher to the required grade, level and
21.79.1 alignment, rolling with smooth wheeled, Vibratory and tandem rollers to cum
achieve the desired compaction as per MORTH specifications clause no. 515
complete in all respects complete as per specification. (Pnumatic tyre roller
must not be used). - using 40/60 TPH capacity H.M.P. with mechanical paver
SMA - 45mm to 75mm, compacted thickness with 5.8% VG-30 bitumen as
per MORTH 5 revision clause 515
Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision:
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates
of specified grading (as per section 515 of MORTH 5th Revision): premixed
with modified bituminous binder containing Pelletized Cellous fibre at 0.3%
(on loose fibre basis) on the weight of total mix in the batch and
filler(Hydrated lime dust @ 2% of weight of aggregates, transporting the hot
mix to work site, Laying with a paver finisher to the required grade, level and
21.79.2 alignment, rolling with smooth wheeled, Vibratory and tandem rollers to cum
achieve the desired compaction as per MORTH specifications clause no. 515
complete in all respects complete as per specification. (Pnumatic tyre roller
must not be used). - using 40/60 TPH capacity H.M.P. with mechanical paver
SMA - 40mm to 50mm, compacted thickness with 5.8% VG-30 bitumen as
per MORTH 5 revision clause 515.
Concrete
Pavement
Item Code Item Description Unit
Vaccum de-watering with vaccum pump and suction mat and compaction with
skin floater clubbed with floating disc including cost of generator, HOM of
22.7 machinery, Screed Vibratory, Power Floater, blade and disc etc., with all lead Sqm
and lift.
Providing groove cutting for width of 5mm to 10mm and depth 80mm-
100mm including cost of cutting machine, generator & HOM of machinery,
including cost of blade,coolant etc., including cleaning of groove & providing
sand and hot bitumen fillars, and filler metal etc., including cost of
22.8.1 Rmt.
conveyance of all materials, labour, lead and lift charges and all other
incidental charges as per drawing and as per specifications. - for concrete
pavement
Providing groove cutting for width of 5mm to 10mm and depth 80mm-
100mm including cost of cutting machine, generator & HOM of machinery,
including cost of blade,coolant etc., including cleaning of groove & providing
sand and hot bitumen fillars, and filler metal etc., including cost of
22.8.2 Rmt.
conveyance of all materials, labour, lead and lift charges and all other
incidental charges as per drawing and as per specifications. - for asphalt
pavement
Providing and laying M40 grade high early strength concrete produced by
IS0-9001 accredited plants, conforming to is 10262-2009, with strength of 40
MPa attained at 72 hrs with OPC @ 430 kgs/cum conforming to IS 269-2015,
aggregates 20 mm @ 680 kgs/cum, 12.5 mm @ 430 kgs/ cum & Fine
aggregates (M -Sand I River Sand) conforming to IS 383- 2016 @ 710
kgs/cum and using Mineral admixture such as Ultrafine GGBS, Silica Fumes
& Rice Husk etc@ 50 kgs/cum conforming to IS 456-2000. Fine particles
22.9 cum
below 75 micron should conform to IS 383- 2016 for fine aggregates. Water
content max. 160 kgs/cum & slump to be between 150 mm to 180 mm with
retention of 1 hour at site including cost of all materials, labour charges,
scaffolding, curing & hire charges of machineries etc complete as per the
directions of engineer incharge of the work.
Geosynthetic and
Reinforced Earth
Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing
and erecting direction and place identification retro-reflectorised sign as per
IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported
24.3 on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the Sqm
ground by means of properly designed foundation with M 15 grade cement
concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing.
Direction and Place Identification Signs with size morethan 0.9 sqm Size
Board: Providing and erecting direction and place identification retro-
reflectorised sign as per IRC:67 made of high intensity grade sheeting vide
Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not
24.4 exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 Sqm
mm , 2 Nos. firmly fixed to the ground by means of properly designed
foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below
ground level as per approved drawing.
KSSRB MS00-5.2 Over Head Sign Board :Supply and installation of retro-
reflective Over-Head Gantry sign boards made out of cube corner micro
prismatic grade sheeting confirming to Type XI standards of IRC:67:2012
specification & fixed over 4mm thick Aluminium Composite Panel sheet
24.6 Sqm
having minimum 0.30 mm thick aluminum skin on both sides excluding the
cost of back support frame, vertical support and horizontal support and
foundation. as directed by the engineer incharge of the work.
KSRRB M800- Painting Letters KSRRB M800-6. Painting two coats on New
Concrete Surface : Painting two coats after filling the surface with synthetic
24.7 enamel paint in all shades on new plastered concrete surfaces complete as per Sqm
specifications. MORTH Specification No. 803
KSRRB M800-7. Painting:-Providing and applying two coats of ready mix
paint of approved brand after through cleaning of surface to give an even
24.8.1 shade complete as per specifications. MORTH Specification No. 803 - Sqm
Painting on Steel Surface
KSRRB M800-7. Painting:-Providing and applying two coats of ready mix
paint of approved brand after through cleaning of surface to give an even
24.8.2 shade complete as per specifications. MORTH Specification No. 803 - Sqm
Painting on Wood Surface
KSRRBM800-9. Painting New Letter and Figures of any Shade with synthetic
24.9 enamel paint black or any other approved colour to give an even shade cm
complete as per specifications. (
KSRRB M800-10. Painting new letter and figures of any shade with synthetic
24.10 enamel paint black or any other approved colour to give an even shade cm
complete as per specifications. (
KSRRB M800-11.1.Painting lines, dashes, arrows etc.,on Roads in two coats
on New Work:-Painting lines, dashes, arrows etc on roads in two coats on new
work with ready mixed road marking paint conforming to IS:164 on
24.11 bituminous surface, including cleaning the surface of all dirt, dust and other Sqm
foreign matter, demarcation at site and traffic control complete as per
specifications. i) Over 10 cm in width. MORTH Specification No. 803
KSRRB M800-11.2. Painting lines, dashes, arrows etc.,on Roads in two coats
on New Work:-Painting lines, dashes, arrows etc on roads in two coats on new
work with ready mixed road marking paint conforming to IS:164 on
24.12 bituminous surface, including cleaning the surface of all dirt, dust and other Sqm
foreign matter, demarcation at site and traffic control complete as per
specifications.ii) Upto 10 cm in width MORTH Specification No. 803
KSRRB M800-12.2 -Painting lines, dashes, arrows etc.,on Roads in two coats
on Old Work:-Painting lines, dashes, arrows etc on roads in two coats on old
work with ready mixed road marking paint conforming to IS: 164 on
24.14 bituminous surface, including cleaning the surface of all dirt, dust and other Sqm
foreign matter, demarcation at site and traffic control complete as per
specifications. ii) Upto 10 cm in width MORTH Specification No. 803
KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound
with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying
of hot applied thermoplastic compound 2.5 mm thick including reflectorising
glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of
24.15 Sqm
surface applied glass beads as per IRC:35. The finished surface to be level,
uniform and free from streaks and holes complete as per specifications.
MORTH Specification No. 803
KSRRB M800-18. G.I. Barbed Wire Fencing 1.8 Metre High:- Providing and
fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50
mm x 50 mm x 6 mm placed every 3 metres center to center founded in M-15
grade cement concrete, 0.6 metre below ground level, every 15th post, last but
one end post and corner post shall be strutted on both sides and end post on
24.22 one side only and provided with 12 horizontal lines and 2 diagonals M
interwoven with horizontal wires, fixed with GI staples, turn buckles etc
complete as per clause 800.7 as per specifications. MORTH Specification No.
807
KSRRB M800-19. Fencing with Welded Steel Wire Fabric 75mm x 50mm:-
Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6
mm at 3 metre center to center with 0.40 metre embedded in M15 grade
cement concrete, corner, end and every 10th post to be strutted, provided with
24.23 M
welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh
and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all
respects as per specifications. MORTH Specification No.Suggestive
KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and
lnstalltion of Moulded Shank Raised Pavement Markers made of
polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and
reflective panels with micro prismatic lens capable of providing total internal
reflection of the light entering the lens face and shall support a load of 16000
kg tested in accordance to Specifications of Category A of MORTH Circular
No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and
length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum
24.41 reflective area of 13 Sqcm on each side and the slope to the base shall be 35 Nos
degree. The strength of detachment of the integrated cylindrical shanks, (of
diameter not less than 19 mm and height not less than 30 mm) from the body
is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the
road for the shanks to go inside, without nails and using epoxy resin based
adhesive as per manufacturer's recommendation and complete as directed by
the engineer
Supply and fixing of Retro Reflective Single Arrow Road Name Signboard of
size 1600mm x 900mm made out of retro reflective sheeting conforming to
Type XI standards of ASTM D 4956-09 & as per IRC 67-2012 for full back
ground of blue colour & white letters and fixed over 4 mm thick Aluminium
Composite Material sheet having minimum 0.5 mm thick Aluminium skin on
both sides with back side painted grey colour and fixed over back support
frame SS angle of 15mm x 20mm x 1.2mm, supported by 38mm OD stainless
steel pipe all round in 304 grade and 2 nos of vertical posts of 50 mm OD
stainless steel pipe of 202 grade firmly fixed to the ground by means of
24.59 properly designed foundation of size 450mm x 450mm x 600mm in 1:1.5:3 Sqm
ratio cement concrete. The background shall be blue in color with letters and
border in white, the item includes earthwork excavation, cost of all materials,
loading, unloading, lead, lift, transportation etc., complete. as per direction of
engineer incharge of work clause 6.9 of IRC 67-2012 for Type XI retro
reflective sheeting from the sheeting manufacturer & a certified copy of test
reports from an independent test laboratory conforming to clause 6.7 of IRC
67-2012 including outdoor weather exposure report for the retro reflective
sheeting offered shall be submitted by the contractor for technical
qualification in the tender
Supply and fixing of Retro Reflective Single arrow road name sign board of
size 2000mm x 900mm made out of retro reflective sheeting conforming to
Type XI standards of ASTM D 4956 - 09 & as per IRC 67-2012 for full back
ground of blue colour & white letters and fixed over 4 mm thick Aluminium
Composite Material sheet having minimum 0.5 mm thick Aluminium skin on
both sides with back side painted grey colour and fixed over back support
frame SS angle of 15mm x 20mm x 1.2mm, supported by 38mm OD stainless
steel pipe all round in 304 grade and 2 nos of vertical posts of 50 mm OD
stainless steel pipe of 202 grade firmly fixed to the ground by means of
24.60 properly designed foundation of size 450mm x 450mm x 600mm in 1:1.5:3 Sqm
ratio cement concrete. The background shall be blue in color with letters and
border in white, the item includes earthwork excavation, cost of all materials,
loading, unloading, lead, lift, transportation etc., complete. as per clause 6 9 of
IRC 67-2012 for Type XI retro reflective sheeting from the sheeting
manufacturer & a certified copy of test reports from an independent test
laboratory conforming to clause 6.7 of IRC 67-2012 including outdoor
weather exposure report for the retro reflective sheeting offered shall be
submitted by the contractor for technical qualification in the tender.
Bridges - Pile
Foundation
KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC
design mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
25.1.1 specifications. MORTH specification No. 1100 M20, 1000mm dia piles 320 M
Kg Cement, C.A. 0.69 M', F.A 0.46 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.
KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC
design mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
25.1.2 specifications. MORTH specification No. 1100 M30, 1000mm dia piles 360 M
Kg Cement, C.A. 0.69 M', F.A 0.46 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.
KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC
design mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
25.1.3 specifications. MORTH specification No. 1100 M35, 1000mm dia piles 390 M
Kg Cement, C.A. 0.69 M', F.A 0.45 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.
KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement
25.2.1 M
as per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M20, 500mm dia piles 320 Kg
Cement, C.A. 0.69 M', F.A 0.46 M 3
KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement
25.2.2 M
as per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M30, 500mm dia piles 360 Kg
Cement, C.A. 0.69 M', F.A 0.46 M'
KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement
25.2.3 M
as per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M35, 500mm dia piles 390 Kg
Cement, C.A. 0.69 M', F.A 0.45 M'
KSRRB M1100-3.1. Bored cast-in-situ R.C.C. Pile with OPC cement design
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
25.3 complete as per Drawing and Technical Specifications and removal of M
excavated earth with all lifts and lead upto 1000 m complete as per
specifications. A. Pile diametre =750 mm MORTH Specification No.1100 &
1700
KSRRB M1100-3.2. Bored cast-in-situ R.C.C. Pile with OPC cement design
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
25.4 complete as per Drawing and Technical Specifications and removal of M
excavated earth with all lifts and lead upto 1000 m complete as per
specifications. B. Pile diametre = 1000 mm MORTH Specification No.1100,
1600 & 1700
KSRRB M1100.3.3. Bored cast-in-situ R.C.C. Pile with OPC cement design
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
25.5 complete as per Drawing and Technical Specifications and removal of M
excavated earth with all lifts and lead upto 1000 m complete as per
specifications.- C. Pile diametre = 1200 mm MORTH Specification No.1100
& 1700
KSRRB M1100-4.4. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.9 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications.Pile diametre = 500 mm MORTH
Specification No. 1100 & 1700
KSRRB M1100-4.5. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.10 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications- Pile diametre = 750 mm
MORTH Specification No. 1100 & 1700
KSRRB M1100-4.6. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.11 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications Pile diametre = 1000 mm
MORTH Specification No.1100 & 1700
KSRRB M1100-4.7. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.12 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications. Size of pile = 300 mm x 300 mm
MORTH Specification No.1100 & 1700
KSRRB M1100-4.8. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.13 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications. Size of pile = 500 mm x 500 mm
MORTH Specification No.1100 & 1700
KSRRB M1100-4.9. Driven precast vertical R.C.C. Piles with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,
25.14 M
excluding Reinforcement complete as per Drawing and & Technical
Specification complete as per specifications. Size of pile = 750 mm x 750 mm
MORTH Specification No.1100 & 1700
KSRRB M1100-5. Driven Vertical Steel Piles as per Drawing and &
Technical Specification complete as per specifications. Section of the pile =H
25.15 Section steel column 400 x 250 mm (ISHB Series) MORTH Specification M
No.1100 & 1900
KSRRB M1100-6. Driven Vertical Steel Piles as per Drawing and &
Technical Specification complete as per specifications. Section of the pile =H
25.16 Section steel column 450 x 250 mm (ISHB Series) MORTH Specification M
No.1100 & 1900
KSRRB M1100- Pile Cap KSRRB M1100-8.1. Cement Concrete for
Reinforced Concrete in Pile Cap as per Drawing and Technical Specification
complete as per specifications. A. RCC with OPC cement design mix M20 @
320kgs, with 20mm and down size graded granite metal coarse aggregates
25.18 cum
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case-I: Using Concrete Mixer
MORTH Specification No.1100, 1500 & 1700
Trail Bores : Drilling 76mm dia (NX) core hole in soft rock using diamond
core bit vertical or inclined up to 10 degree to vertical, as directed in- cluding
cost of materials, machineries, labour, water charges, collection of core
25.30 samples, logging and leaving, supplying honne wood core box including M
cement grounding (excluding cost of cement for grouting) and re-drilling in
case of collapse of sides etc., complete.
Trail Bores : Drilling 76 mm dia (NX) core hole in Hard rock using dia- mond
core bit vertical or inclined up to 10 degree to vertical as directed including
25.31 cost of materials, machineries, labour, including cement grouting (excluding M
cost of cement for grouting) and re-drilling incase of collapse of sides etc.,
complete.
Bridges - Well
Bridges - Well
Foundation
KSRRB M1200- Providing and Laying Cutting Edge of Mild Steel KSRRB
M1200-2. Providing and Laying Cutting Edge of Mild Steel weighing 40 kg
26.4 per metre for Well Foundation complete as per Drawing and Technical Tonne
Specification complete as per specifications MORTH Specification No.1200
& 1900
KSRRB M1200-9.1. (i) PCC with OPC cement design mix M20 @ 320kgs,
with 40mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to
26.14 IS9103-1999 Reaffirmed-2008 Same as in bottom plug concrete, excluding cum
cost of forming sump, protective bunds, chiselling etc.MORTH Specification
No.1200,1500 & 1700
KSRRB M1200-10.3. (iii) PCC with OPC cement design mix M25 @ 340kgs,
with 40mm and down size graded granite metal coarse aggregates @0.7cum
26.18 and fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to cum
IS9103-1999 Reaffirmed-2008 Same as item 2100-11.5. excluding formwork
MORTH Specification No.1200,1500 & 1700
KSRRB M1200-10.4. (iv) PCC with OPC cement design mix M30 @ 360kgs,
with 40mm and down size graded granite metal coarse aggregates @0.69cum
26.19 and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to cum
IS9103-1999 Reaffirmed-2008 Same as item 2100-11.9. excluding formwork
MORTH Specification No.1200,1500 & 1700
Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted in
50mm dia holes drilled in hard rock and grouting in CM 1:1 including
26.130.1 necessary bending, hooking, cutting and handling charges complete, including Each
the cost of steel. (MORTH clause 1200). - below LWL in open foundation
upto 3m.
Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted in
50mm dia holes drilled in hard rock and grouting in CM 1:1 including
26.130.2 necessary bending, hooking, cutting and handling charges complete, including Each
the cost of steel. (MORTH clause 1200). - below LWL in open foundation
beyond 3m.
Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted in
50mm dia holes drilled in hard rock and grouting in CM 1:1 including
26.130.3 necessary bending, hooking, cutting and handling charges complete, including Each
the cost of steel. (MORTH clause 1200). - for well foundation below LWL
upto 3m.
Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted in
50mm dia holes drilled in hard rock and grouting in CM 1:1 including
26.130.4 necessary bending, hooking, cutting and handling charges complete, including Each
the cost of steel. (MORTH clause 1200). - for well foundation below LWL
beyond 3m.
Bridges - Open
Foundation
Bridges - Open
Foundation
27.4 cum
27.5 cum
27.6 cum
"KSRRB M2100-3.1. Earth work excavation in all kinds of ordinary rock I
soft rock not requiring blasting for foundation of bridges and allied works as
per drawing and technical specifications, including setting out, providing
shoring and bracing, removal of stumps and other deleterious matter, dressing
27.7.1 cum
of sides and bottom and filling back with approved material including cost of
all materials, labour, HOM complete as per specifications. MORTH
Specification No. 304 (i) 0 m to 3 m depth by manual means
"KSRRB M2100-3.1. Earth work excavation in all kinds of ordinary rock I
soft rock not requiring blasting for foundation of bridges and allied works as
per drawing and technical specifications, including setting out, providing
shoring and bracing, removal of stumps and other deleterious matter, dressing
27.7.2 cum
of sides and bottom and filling back with approved material including cost of
all materials, labour, HOM complete as per specifications. MORTH
Specification No. 304 (ii) 3 m to 6 m depth by manual means
"KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal
of stumps and other deleterious matter, dressing of sides and bottom and
27.9.1 cum
filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 (i) 0 m
to 3 m depth by manual means
"KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal
of stumps and other deleterious matter, dressing of sides and bottom and
27.9.2 cum
filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 (ii) 3 m
to 6 m depth by manual means
"KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal
of stumps and other deleterious matter, dressing of sides and bottom and
27.9.3 cum
filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 (iii)
Above 6 m depth by manual means
"KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
27.10.1 cum
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 i) 0 m to
3 m depth by mechanical means
"KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
27.10.2 cum
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 ii) 3m to
6 m depth by mechanical means
"KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
27.10.3 cum
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 iii)
Above 6 m depth by mechanical means
27.13 cum
KSRRB M2100 Filling the foundations KSRRB 2100-6. Filling the
foundations trenches using approved sand as per drawing and technical
27.14 specifications in 250mm layers, wherever necessary watering and ramming, cum
including cost of all materials, labour complete as per specifications. MORTH
Chapter 12
KSRRB M2100 Back Filling of abutments using wing wall & Returns
KSRRB M2100-7. Earth work in excavation for foundation of structures as
per drawing and technical specifications, including setting out, construction of
27.15 shoring and bracing, removal of stumps and other deleterious matter, dressing cum
of sides and bottom and backfilling with approved material complete as per
specifications. VI. Backfilling in Marshy Foundation Pits.
KSRRB M2200-5.1 Providing and laying cement concrete of mix 1:2:4 with
OPC @ 240kgs, with 40mm and down size graded granite metal coarse
28.7.1 aggregates @0.63cum and fine aggregates @ 0.42cum including cost of cum
materials, labour, HOM curing, form works, scaffolding and centering
complete as per MORTH Section : 2200 & IS 456 a) upto 5mtr height
Providing and laying cement concrete 1:2:4 with OPC @ 240kgs, with 40mm
28.7.1.1 and down size graded granite metal coarse aggregates @0.63cum and fine cum
aggregates@ 0.42cum above 5mtr height
KSRRB M2200-5.2. Providing and laying Design mix M20 with OPC @
320kgs, with 40mm and down size graded granite metal coarse aggregates
@0.64cum and fine aggregates @ 0.43cum, with superplastisiser @31ts
28.7.2 confirming to IS9103-1999 Reaffirmed-2008, including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. b) upto 5 m height
Providing and laying PCC grade design mix M20with OPC @320kgs, with
40mm and down size graded granite metal coarse aggregates @0.64cum and
fine aggregates@ 0.43cum, with superplastisiser @31ts confirming to IS9103-
28.7.2.1 1999 Reaffirmed-2008, including cost of materials, labour, HOM curing, form cum
works, scaffolding and centering complete as per specifications. above 5mtr
height
KSRRB M2200-5.3. Providing and laying Design mix M25 With OPC @
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
28.7.3 confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. c) - i) Upto 5 m height
KSRRB M2200-5.4. Providing and laying Design mix M25 @ with OPC
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
28.7.4 confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height above 5 m and upto 10m.
KSRRB M2200-5.5. Providing and laying Design mix M25 with OPC @
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
28.7.5 confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. -iii) For height above 10m.
K8RRB M2200-5.6. Providing and laying Design mix M30 with OPC @
360kgs, with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.6 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - i) upto 5 m height
K8RRB M2200-5.7. Providing and laying Design mix M30 with OPC @
360kgs, with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.7 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. ii) For height above 5 m and upto 10m.
K8RRB M2200-5.8. Providing and laying Design mix M30 with OPC @
360kgs, with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.8 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height above 10 m.
K8RRB M2200-5.9. Providing and laying Design mix M20 with OPC @
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.9 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - i) Upto 5 m height.
K8RRB M2200-5.10. Providing and laying Design mix M20 with OPC @
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.10 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height, 5m to 10m
K8RRB M2200-5.11. Providing and laying Design mix M20 with OPC @
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.11 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height above 10m.
K8RRB M2200-5.12. Providing and laying Design mix M25 with OPC @
340kgs, with 20mm and down size graded granite metal coarse aggregates
28.7.12 @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts cum
confirming to 189103-1999 Reaffirmed-2008 - i) Upto 5m height
K8RRB M2200-5.13. Providing and laying Design mix M25 with OPC @
340kgs, with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
28.7.13 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - ii)For height, 5m to 10m
K8RRB M2200-5.14. Providing and laying Design mix M25 with OPC @
340kgs, with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
28.7.14 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height, above 10m,
K8RRB M2200-5.15. Providing and laying Design mix M30 with OPC @
360kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.15 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - i) Upto 5m height,
K8RRB M2200-5.16. Design mix M30 with OPC@ 360kgs, with 20mm and
down size graded granite metal coarse aggregates @0.69cum and fine
28.7.16 aggregates @ 0.46cum, with superplastisiser @31ts confirming to 189103- cum
1999 Reaffirmed-2008 ii) For height, 5m to 10m
K8RRB M2200-5.17. Providing and laying Design mix M30 with OPC @
360kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
28.7.17 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. iii) For height, above 10m
K8RRB M2200-5.18. Providing and laying Design mix M35 with OPC @
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
28.7.18 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - i) U pto 5m height
K8RRB M2200-5.19. Providing and laying Design mix M35 with OPC @
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
28.7.19 confirming to 189103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height 5m to 10m
KSRRB M2200-5.20. Providing and laying Design mix M35 with OPC @
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
28.7.20 confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, cum
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height above 10m,
KSRRB M2200-8.1. Back filling behind abutment, wing wall and return wall
complete as per drawing and Technical Specification including cost of
28.11 materials, labour, HOM of machineries, complete as per specifications. A. cum
Granular material MORTH Specification No. 2204 & 304
KSRRB M2200- Filter Media KSRRB M2200-9. Providing and laying of
Filter media with granular materials /stone crushed aggregates satisfying the
requirements laid down in clause 2504.2.2. of MORTH specifications to a
thickness of not less than 600 mm with smaller size towards the soil and
bigger size towards the wall and provided over the entire surface behind
28.13 abutment, wing wall and return wall to the full height compacted to a firm cum
condition complete as per drawing and Technical Specification including cost
of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2504.2.2
Bridges - Concrete
Superstructure
Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
29.15.1 graded granite metal coarse aggregates @0.68cum and fine aggregates @ cum
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600
& 1700 - Height upto 5 m
Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
29.15.2 graded granite metal coarse aggregates @0.68cum and fine aggregates @ cum
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600
& 1700 - Height 5 m to 10 m
Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
29.15.3 graded granite metal coarse aggregates @0.68cum and fine aggregates @ cum
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600
& 1700 - Height 10 m to 15 m
Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
29.15.4 graded granite metal coarse aggregates @0.68cum and fine aggregates @ cum
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600
& 1700 - Height 15 m to 20 m
Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
29.15.5 graded granite metal coarse aggregates @0.68cum and fine aggregates @ cum
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600
& 1700 - Height above 20 m
Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
29.24.2 graded granite metal coarse aggregates @0.67cum and fine aggregates @ cum
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 5 m to 10 m
Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
29.24.3 graded granite metal coarse aggregates @0.67cum and fine aggregates @ cum
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 10 m to 15 m
Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
29.24.4 graded granite metal coarse aggregates @0.67cum and fine aggregates @ cum
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 15 m to 20 m
Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
29.24.5 graded granite metal coarse aggregates @0.67cum and fine aggregates @ cum
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height above 20 m
T - Beams & slabs including launching of precast girder by launching truss
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
29.25.1 mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse cum
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification
No. 1500,1600 & 1700 - Height upto 5 m
KSRRB M2300 - High tensile wires KSRRB M2300-15. High tensile steel
wires / strands including all accessories for stressing, stressing operations and
29.30 grouting complete as per drawing and Technical Specifications complete as Tonne
per specifications MORTH Specification No. 1800
Bridges - River
Training
Works and Protection
Works
30.2 cum
KSRRB M2500-Cement concrete blocks KSRRB M2500-2. Providing and
laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ
30.3 and made with nominal mix of M- 15 grade cement concrete with a minimum cum
cement content of 240 kg / cum as per IRC: 21-2000 complete as per
specifications MORTH Specification No. 2503
Expansion Joints
KSRRB M2700-4. Providing, fitting and fixing mild steel railing using ISMC
@ 29.46 kg/m, MS flats @ 10.12 kg/m and MS bars @ 1.80 kg/m as per
32.4 drawing and Technical Specification including bolts and nuts etc., including M
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2703.2, 1900
KSRRB M2700-5. Drainage Spouts using 1OOmm class 'B' Gl pipe as per
drawing and Technical specification including clamps and nuts etc., including
32.5 cost of materials, labour, HOM complete as per specifications. MORTH No
Specification No. 2705
KSRRB M2700-6. PCC M15 Grade leveling course below approach slab
32.6 complete as per drawing and Technical specification complete as per cum
specifications MORTH Specification No. 2700
KSRRB M2700-7. Reinforced cement concrete M30 approach slab including
reinforcement@ 70 kg/cum and formwork complete as per drawing and
32.7 Technical specification including cost of materials, labour, HOM complete as cum
per specifications. MORTH Specification No.1500, 1600, 1700 & 2704
KSRRB M2300-16. Providing and laying Cement concrete wearing coat with
OPC cement design mix M30 @ 360 kgs, with 20mm and down size graded
granite metal coarse aggregates @0.69cum and fine aggregtes@ 0.46cum, and
reinforcement at 75 kg/cum with superplastisiser @31ts confirming to
32.8 IS9103-1999 Reaffirmed-2008 including cost of reinforcement complete as cum
per drawing and Technical Specifications including cost of materials, labour,
HOM complete as per specifications. MORTH Specification No. 2702
Providing and laying 3mm thick asphalt seal pad made of actatic
polypropylene polymer (app) modified bituminous pad reinforced with non
32.13 woven polyester mat of high bear strength as a carrier (confirming to ASTM - Sqm
06222 (S) Specification) on concrete bridge deck slab including cost of
materials, labour, HOM complete as per specifications.
KSRRB M2800-20. Repair of RCC Railing Carrying out repair of RCC M-30
33.23 railing to bring it to the original shape including cost of materials, labour, M
HOM complete as per specifications.
KSRRB M2800-21. Repair of Steel Railing to bring it to the original shape
33.24 M
including cost of materials, labour, HOM complete as per specifications.
Pipe Culverts
Pipe Culverts
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.1 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
300mm. dia
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.2 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
450mm. dia
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.3 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
600mm. dia
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.4 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
750mm. dia
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.5 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
900mm. dia
Providing and laying reinforced cement concrete pipe NP3 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.6.6 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
1200mm. dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.1 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 -
-150mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.2 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
250mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.3 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
300mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.4 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
450mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.5 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
600mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.6 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
750mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.7 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
900mm dia
Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
34.7.8 cost of all materials, labour, curing complete as per specifications. M
Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -
1200mm dia
Providing and laying in position plain cement concrete of mix 1:2:4 with
cement @ 240kgs, with 20mm and down size graded granite metal coarse
aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed,
34.11 concrete laid in layers not exceeding 15 cms. thick, well compacted, for cum
coping. Including cost of all materials, labour, HOM of machinery, curing
complete as per specifications. Specification No. KBS 4.1, 4.2
Providing and laying in position plain cement concrete of mix 1:2:4 for sub-
structure works like Culverts, retaining walls etc. , with cement @ 240 kgs, 40
34.16 mm & down size graded granite metal coarse aggregate @ 0.84 cum and fine cum
aggregates @ 0.46 cum machine mixed, with necessary scaffolding,form work
etc. , including cost of labour, HOM curing etc., complete.
Providing and laying in position plain/Reinforced cement cement concrete
M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm
& down size graded granite metal coarse aggregate @ 0.69 cum and fine
aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts
34.17 cum
confirming to IS 9103-2008,concrete laid in layers, well compacted and
providing weep holes wherever necessary with necessary scaffolding, form
work etc., including cost of labour, HOM curing etc., complete.
Maintenance
of roads
KSRRB 3000 Filling Pot-holes and Patch Repairs with Bituminous Concrete,
40 mm KSRRB M3000-5. Removal of all failed material, trimming of
completed excavation to provide firm vertical faces, cleaning of surface,
applying tack coat on the sides and base of excavation at 2.5kg/1Osqm as per
clause 500.3, filling back the pot holes with hot bituminous material as per
35.5 clause 500.4, compacting, trimming and finishing the surface to form a Sqm
smooth continuous surface, all as per clause 3004.2 including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 3004.2
KSRRB M3000-6. Filling of crack using slow- curing bitumen emulsion and
applying crusher dust in case crack are wider than 3mm including cost of
35.6 materials, labour, HOM complete as per specifications. MORTH Specification M
No. 3004.3.3
KSRRB M3000-7. Applying crusher dust to areas of road where bleeding of
35.7 excess bitumen has occurred including cost of materials, labour, HOM M
complete as per specifications. MORTH Specification No. 3004.4
KSRRB 3000 Repair of Joint Grooves with Epoxy Mortar KSRRB M3000-8.
Repair of spalled joint grooves of contraction joints, longitudinal joints and
35.8 expansion joints in concrete pavements using epoxy mortar or epoxy concrete M
including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 3005.1
Patching of deep potholes by restoring the granular base course using material
confirming to WBM grade -III standards/WMM wherever necessary by
manual means including trimming the pothole to the required shape and size,
cleaning the pothole applying tack coat at 4 kg/10 sqm over the WBM/ WMM
surface including cleaning etc, and covering the surface with premixed mix
35.13.2 seal TYPE-A 20mm thick including lead, loading unloading, rolling and Sqm
finishing etc., including cost of materials, labour, HOM complete as per
specifications. Complete as per standard specification.. - - upto 150mm thick
Reinforced Earth
Structure
Other Items
Supplying and fixing M.S. Rectangular poles made out of 2 equal angles
of65x65x6 mm welded together and fixed in CC (1 :2:4) WITH 2 NOS 16mm
dia M.S. hold fast rods each of length 25 ems. Including cost of all materials
cutting, bending scaffolding wherever necessary, nicely finishing the welded
37.2 joints with all lead lifts and as per the directions of the Engineer-in- charge of M
the work and including providing 2 coats of approved quality paint over one
coat of shop painting (excluding cost of earthwork and concrete) including
cost of materials, labour, HOM complete as per specifications.
Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14
including removing the bends, cutting the pipe, and fixing pipe in between the
existing tvvo verticle poles (M.S. rectangular poles) and spot welding the
chain link with M.S. block pipe including cost of all materials wastage in
37.4 cutting, and scaffolding wherever necessary with all lead and lift as directed M
by the Engineer-in-charge of work etc., complete including two coats of
approved quality paint over one coat of shop paint, including cost of materials,
labour, HOM complete as per specifications
Providing barbed Gl wire fencing of 12x12 gauge drawn into stone pillars or
iron pillars including drawing in holes wherever necessary excluding the cost
37.5 of pillars but including the cost of barbed wire and binding wire etc., including M
cost of materials, labour, HOM complete as per specifications.
Providing corrugated cement asbestos Ridge sheets set in C.M. 1:3 and
37.6 pointed with C.M. 1 :3. including cost of materials, labour, HOM complete as M
per specifications.
Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2.
37.7 M
including cost of materials, labour, HOM complete as per specifications.
Fixing doors, window and ventilators in walls.including cost of materials,
37.8 No
labour, HOM complete as per specifications
Supplying and fixing new Mangalore tiles on existing reepers including cost
37.9 Sqm
of materials, labour, HOM complete as per specifications.
Removing and fixing old Mangalore ridge tiles including pointing with C.M.
37.10 M
1:3. including cost of materials, labour, HOM complete as per specifications.
Repairs to roof with available corrugated zinc sheets/ A.C. sheets with new J
37.11 bolts, screws and washers etc., on existing reeper and rafters. including cost of Sqm
materials, labour, HOM complete as per specifications.
Repairing door and window frames with available wood to the required size.
37.12 Sqm
including cost of materials, labour, HOM complete as per specifications.
Repairing and fixing shutters (panelled or glazed) to doors, windows,
37.13 ventilators and cupboards. including cost of materials, labour, HOM complete Sqm
as per specifications.
Fixing old eve board with necessary screws and approved painting two coats.
37.14 including cost of materials, labour, HOM complete as per specifications. M
Providing and fixing plain rolled glass 3mm thick with TW beading of 1 Omm
37.15 thick. including cost of materials, labour, HOM complete as per specifications. Sqm
Providing and fixing 4mm thick glass panes to steel windows including TW
37.16 beading of 10 mm thick and 2 coats of approved paints. including cost of Sqm
materials, labour, HOM complete as per specifications.
Easing of shutters of door. including cost of materials, labour, HOM complete
37.17 No
as per specifications.
Easing of window shutters. including cost of materials, labour, HOM
37.18 No
complete as per specifications.
Providing and fixing M.S bars to windows and ventilators including cutting
37.19 making holes in frame work with two coats of approved paints. including cost kgs
of materials, labour, HOM complete as per specifications.
Labour charges for fixing iron bars to windows including cutting fixing and
making holes in the frame work and painting two coats with approved paint
37.20 etc., including cost of materials, labour, HOM complete as per specifications. kgs
complete (excluding the cost of iron bars)
Repairs to cornice or coping or mortar band, 15 em deep and Scm proJection
37.21 for damaged portion. including cost of materials, labour, HOM complete as Sqm
per specifications.
Removing cuddappa slab flooring and stacking the material with a lead of 50
37.22 meters. including cost of materials, labour, HOM complete as per Sqm
specifications.
Removing and resetting Mangalore tiles and replacing broken ones wherever
37.23 necessary including cost of materials, labour, HOM complete as per Sqm
specifications. (excluding cost of new tiles).
Cleaning glass with chemicals. including cost of materials, labour, HOM
37.24 Sqm
complete as per specifications
Removing and refixing existing mortar and pestle stone. including cost of
37.25 Each
materials, labour, HOM complete as per specifications.
Removing by chiselling cement joints 50mm to 80mm deep in pipes upto
37.26 150mm dia. including cost of materials, labour, HOM complete as per Sqm
specifications.
Labour charges for fixing plain, frosted or pin headed glass panels (clear glass
37.27 area) with teakwood beading. including cost of materials, labour, HOM Sqm
complete as per specifications.
Drilling holes of2.50 ems dia (roof/chaJja/stone). including cost of materials,
37.28.1 labour, HOM complete as per specifications. - - in slabs upto 7.50 cms thick No
Cutting of road surface for pipeline trenches and disposing of the excavated
stuff as directed including barricading, danger lighting etc., in the Asphalt
37.38 surface road including cost of materials, labour, HOM complete as per cum
specifications.
Cutting of road surface for pipeline trenches and disposing of the excavated
stuff as directed including barricading, danger lighting etc., in the Cement
37.40 concrete road including cost of materials, labour, HOM complete as per cum
specifications.
Diversion of water course by providing Coffer dams or bunds or islands as
may be necessary for piers and abutments foundations, bailing out or pumping
37.41.1 water during excavation and until completion etc., including cost of materials, cum
labour, HOM complete as per specifications. - - 1.50 mtrs depth below LWL.
Dismantling Mangalore tiles roof and stacking the material within a radius of
37.42.1 50 meters. including cost of materials, labour, HOM complete as per Sqm
specifications. - - with reepers
Dismantling Mangalore tiles roof and stacking the material within a radius of
37.42.2 50 meters. including cost of materials, labour, HOM complete as per Sqm
specifications. - - without reepers
Dismantling Mangalore tiles roof and stacking the material within a radius of
37.42.3 50 meters. including cost of materials, labour, HOM complete as per Sqm
specifications. - A.C. sheet roofing.
Dismantling Cl or AC rain water Pipes with fittings and clamps and stacking
37.43 the materials with a lead of 50 meters. including cost of materials, labour, RMt
HOM complete as per specifications.
Dismantling weather proof course and removing and conveying the debris to a
37.44 distance upto 200m. including cost of materials, labour, HOM complete as per cum
specifications.
Dismantling Madras terrace jack arch roof including rafters and stacking the
materials with a lead upto 50m and removing the debris to a distance upto
37.45 200m. including cost of materials, labour, HOM complete as per Sqm
specifications.
Dismantling stone slab roofing over wooden reepers or RCC battens
(dismantling reepers and battens to be paid for separately) including stacking
37.46 of serviceable materials and disposal of unserviceable within 200m lead (with Sqm
in average thickness of 10 ems including cost of materials, labour, HOM
complete as per specifications.
Providing and laying plain/reinforced cement concrete for side drains using
M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size
granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum
machine mixed, well compacted for walls and bottom including centering,
37.59.2 shuttering, cost of materials, HOM of machinery, curing etc., complete cum
excluding cost of steel as per MORTH specification No. 1500, 1700, 2200.
including cost of materials, labour, HOM complete as per specifications. Wall
& bottom thickness 15cm
Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in
reinforced cement concrete poles of size 0.1OxO.1Ox2.60mtrs in cement
concrete M 20 proportion using 20mm and down size graded metal machine
mixed with 1Omm dia main steel bars and 8mm dia stirups. The board shall
be provided with 12mm thick cement plaster in cement mortar 1 :3 on both the
sides. The poles shall be embedded in the ground for a depth of0.5 mtrs with
cement concrete M 10 proportion. The board shall be fixed as per the drawing
37.60 Each
and atthe place indicated by the Engineer incharge of the work. The cost
includes excavation, bare cost of all materials, cost of steel, centering,
transportation charges, fixing charges, labour, HOM etc., The work shall be
carried out as per the detailed specifications, drawings and directions of the
Engineer in charge of the work.
Providing and fixing sign board of size 60x60cm equilateral triangle using
M.S sheet 5mm thick with RCC pole of size 0.15x0.15x2.3 mtr made out of
cement concrete M 20 proportion using 20mm and down size graded metal
machine mixed with 1Omm dia main steel bars and 8mm dia stirups. The
poles shall be embedded in the ground for a depth of 0.6mtrs with cement
concrete M 10 proportion. The board shall be fixed as per the drawing and at
37.61 the place indicated by the Engineer incharge of the work. The cost includes Each
excavation, bare cost of all materials, cost of steel, centering, transportation
charges, fixing charges labour, HOM etc., The work shall be carried out as per
the detailed specifications, drawings and directions of the Engineer in charge
of the work.
Providing and fixing RCC precast fencing pole of size 0 15m x 0 15m x 2.0m
casted in CC 1:1.5:3 with 20mm downsize aggregate making holes for
drawing barbed wire at 30cm etc using 10 mm dia vertical 4 TMT steel rods
and Smm dia stirrups at 15cm c/c fixed 1.5m above ground level using steel
moulding, curing, transportation to work spot including excavation in hard soil
37.64 fixing in plain cement concrete 1:2:4 using 20mm downsize aggregate Each
including aligning to plumb and line providing including cost of all materials,
labour, hire charge of machineries lead, lift loading & unloading
etc.,Complete.
Providing and laying 100mm thick pre-cast U-shaped RCC drains using M20
grade Concrete reinforced with steel @ 5 kg per Sqm Precast units and jointed
in CM 1:3 proportion and neatly finished including cost of labour, materials,
37.65.1 HOM, curing, lead and lift charges etc, Complete as per MORTH M
specifications No. 1500, 1700 With size of 450 mm x 450 mm inner
dimensions
Providing and laying 100mm thick pre-cast U-shaped RCC drains using M20
grade Concrete reinforced with steel @ 5 kg per Sqm Precast units and jointed
in CM 1:3 proportion and neatly finished including cost of labour, materials,
37.65.2 HOM, curing, lead and lift charges etc, Complete as per MORTH M
specifications No. 1500, 1700 With size of 450 mm x 600 mm inner
dimensions
Providing and laying 100mm thick pre-cast cover slabs over drains of width
not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00
kg/Sqm, slabs JOinted in CM 1:3 proportion and nicely finished including
37.66 providing holes in the Cover slabs wherever necessary for easy drainage of M
surface water including of labour, materials, HOM, curing, lead and lift
charges etc, Complete as per MORTH specifications No. 1500, 1700.
Innovative Items
Atotic Polyproyelene Providing and laying Water proofing with single layer of
3mm thick granule finish @ 4.5kg/sqm using Atotic Polypropylene
membranes (APP) with overlap of 100mm at every joints including applying
bitumen emulsion priming coat over the dry surface, including scarifying the
38.4 Sqm
surface and removing dust and foreign materials removing debris and cleaning
surface with wire brush to give even surface. The work shall be carried out as
per the instructions of Engineer in charge of the work.
Admixture for concrete mix Concrete structures including water retaining
structures Providing admixture to concrete mix using INTEGRAL
CRYSTALINE admixture. Integral Crystalline Admixture shall be added
@0.8% by weight of cement to the ready mix concrete / concrete at the time of
batching conforming to ASTM C 1202 & DIN V 18998. methodology :
mixing: Admixture must be added to the concrete at the time of batching at
0.8% by weight of cement. The sequence of procedures for addition will vary
according to the type of batch plant operation and equipment: addition of
admixture to rmC transit mixer / Concrete mixer: Mix Admixture with water
38.5 to form a very thin slurry 1 powder : 1.26 liters of water (e.g. 18 kg of powder kgs
mixed with 22.7 liters of water). Pour this material into the drum of the ready-
mix truck/ concrete mixer. The aggregate, cement and water should be batched
and mixed in the plant in accordance with standard practices (taking into
account the quantity of water that has already been placed in the ready-mix
truck). Mix for at least 5 minutes to ensure even distribution of the Admixture
throughout the concrete. addition of admixture to the batching Plant: Add
Admix to the coarse aggregates and sand, then mix thoroughly for 2
Swellable rapid expansion water proofing for construction joints in all types of
concrete works / composite works Providing and water proofing treatment to
construction joints of all types of concrete works using swellable rapid
expansion in water. Water stop capable of expanding 215% in 120 hours,
when immersed potable water Conforming to ASTM D 297 & ASTM D 6
Standard methodology: The water stopper shall be laid as per following steps:
i. Clean the surface sufficiently to receive the water stopper ii. Apply a coat of
primer to the area where water stopper is to be laid placed at an application
38.9 rate of 240 running meters per 3.78 Liters of primer (primer is supplied along M
with water stopper) iii. Using moderate hand pressure with the heel of the
hand, press a continuous bead of Water Stopper firmly into the position. Make
sure that the product has bonded to the primed area. iv. Peel the protective
backing form the exposed side of the water stop and tightly butt the coil ends
to form a continuous water stop. Do not overlap the water stop. v. Follow
standard concrete pouring procedures here after. The proposed water stopper
shall be used for the following situations: 1. At all the cold construction joints
2. At the junction of Horizontal Raft and vertical retaining walls 3. At the
Junction of horizontal Roof slab and vertical Parapet walls 4. At all cold
FOR CRACKS IN ROOFTOP SURFACES Providing Water proofer Capable
of bridging cracks upto 2mm in the Exposed Roof surface using Spray
Applied Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical
mortar shall be applied before applying this spray liquid water proofer. The
area shall be cleaned by high pressure water jet/wire bush or by mechanical
means to make it free from loose particle, dust dirt etc. methodology : 1. The
first part consisting of grouting the porous slab area with non- shrink
cementatious grout (if required). 2. The second part consisting of treating the
38.10 cracks and construction joints by routing-out to a minimum 20mm x 20mm
groove and filling it with a crystalisation Mortar after priming with
crystalisation slurry. 3. The third part consisting of making vata at the
interface joint of the slab and parapet with crystalisation Mortar. 4. The fourth
part consisting of sealing all joints of outlet drains pipe, etc. with crystalisation
Mortar. 5. The fifth part consisting of providing and applying liquid water
proofer which can be spray applied at a coverage of 0.2 lt/ sqmt
FOR CRACKS IN ROOFTOP SURFACES Providing Water proofer Capable
of bridging cracks upto 2mm in the Exposed Roof surface using Spray
Applied Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical
mortar shall be applied before applying this spray liquid water proofer. The
38.10.1 r mt
area shall be cleaned by high pressure water jet/wire bush or by mechanical
means to make it free from loose particle, dust dirt etc. _ for crack filling
RBI GRADE-81 Pulverising the local soil in place, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI Grade 81 as
approved by CRRI, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with the road roller at OMC to the
38.15.1.1 desired density for improving the subgrade & shoulders. (The laboratory CBR cum
of the compacted soil shall not be less than 10) For soils having WL between
35 & 50, with 1% of inorganic Compound like RBI Grade 81 by weight of
Soil.
RBI GRADE-81 Pulverising the local soil in place, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI Grade 81 as
approved by CRRI, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with the road roller at OMC to the
38.15.1.2 desired density for improving the subgrade & shoulders. (The laboratory CBR cum
of the compacted soil shall not be less than 10) For soils having WL more than
50, with 2% of inorganic Compound like RBI Grade 81 by weight of Soil.
RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and
mixing 80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading
with rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
38.15.2.1 vibratory roller at OMC to the desired density for preparing the Base / Sub cum
Base Layer (The Laboratory CBR of the gravel soil shall not be less that 9%)
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 2% inorganic Compound like RBI GRADE 81 by weight
of Soil & Aggregate Mix Material :
RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and
mixing 80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading
with rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
38.15.2.2 vibratory roller at OMC to the desired density for preparing the Base / Sub cum
Base Layer (The Laboratory CBR of the gravel soil shall not be less that 9%)
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 3% inorganic Compound like RBI GRADE 81 by weight
of Soil & Aggregate Mix Material
RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and
mixing 80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading
with rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
38.15.2.3 vibratory roller at OMC to the desired density for preparing the Base / Sub cum
Base Layer (The Laboratory CBR of the gravel soil shall not be less that 9%)
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 4% inorganic Compound like RBI GRADE 81 by weight
of Soil & Aggregate Mix Material
RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and
mixing 80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading
with rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
38.15.2.4 vibratory roller at OMC to the desired density for preparing the Base / Sub cum
Base Layer (The Laboratory CBR of the gravel soil shall not be less that 9%)
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 5% inorganic Compound like RBI GRADE 81 by weight
of Soil & Aggregate Mix Material:
RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material)
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
38.15.3.1 water, grading with motor grader and compacting with vibratory roller at cum
OMC to the desired density for preparing the Stabilized Base / Sub Base
Layer including cost of all materials, labour, HOM of Machineries complete
as per specification. With 2% inorganic Compound like RBI GRADE 81 by
weight of Coarse & Fine Aggregate Mix Material
RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material)
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
38.15.3.2 water, grading with motor grader and compacting with vibratory roller at cum
OMC to the desired density for preparing the Stabilized Base / Sub Base
Layer including cost of all materials, labour, HOM of Machineries complete
as per specification. With 3% inorganic Compound like RBI GRADE 81 by
weight of Coarse & Fine Aggregate Mix Material
RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material)
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
38.15.3.3 water, grading with motor grader and compacting with vibratory roller at cum
OMC to the desired density for preparing the Stabilized Base / Sub Base
Layer including cost of all materials, labour, HOM of Machineries complete
as per specification. With 4% inorganic Compound like RBI GRADE 81 by
weight of Coarse & Fine Aggregate Mix Material
RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the
existing worn-out/ damaged road with recycler/milling machine duly adding
the specified quantity of inorganic Compound RBI GRADE-81 as specified
by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with vibratory roller at OMC to the
38.15.4.1 desired density for preparing the Stabilized Base including cost of all cum
materials, labour, HOM of Machineries complete as per specification. (RAP-
Reclaimed Asphalt Pavement) With 2% inorganic Compound like RBI
GRADE 81 by weight of Milled Material:
RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the
existing worn-out/ damaged road with recycler/milling machine duly adding
the specified quantity of inorganic Compound RBI GRADE-81 as specified
by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with vibratory roller at OMC to the
38.15.4.2 desired density for preparing the Stabilized Base including cost of all cum
materials, labour, HOM of Machineries complete as per specification. (RAP-
Reclaimed Asphalt Pavement) With 3% inorganic Compound like RBI
GRADE 81 by weight of Milled Material
RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the
existing worn-out/ damaged road with recycler/milling machine duly adding
the specified quantity of inorganic Compound RBI GRADE-81 as specified
by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with vibratory roller at OMC to the
38.15.4.3 desired density for preparing the Stabilized Base including cost of all cum
materials, labour, HOM of Machineries complete as per specification. (RAP-
Reclaimed Asphalt Pavement) With 4% inorganic Compound like RBI
GRADE 81 by weight of Milled Material
RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the
existing worn-out/ damaged road with recycler/milling machine duly adding
the specified quantity of inorganic Compound RBI GRADE-81 as specified
by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with vibratory roller at OMC to the
38.15.4.4 desired density for preparing the Stabilized Base including cost of all cum
materials, labour, HOM of Machineries complete as per specification. (RAP-
Reclaimed Asphalt Pavement) With 5% inorganic Compound like RBI
GRADE 81 by weight of Milled Material:
RBI GRADE -81 --- Cutting the pothole to regular shape, trimming to provide
firm vertical faces, removing all loose materials, cleaning of surface, filling
with a mix of aggregates (40mm downsize) & local soil (except BC Soil) in
1:1 proportion duly adding 2 % of Inorganic compound RBI Grade 81, mixing
thoroughly, compacting & finishing etc., complete in WBM layers for
Pothole/Patch repairs. Methodology and Construction : Stabilization using
RBI Grade 81 (the process of improving the engineering properties of a
material by means of the addition of RBI Grade 81) is subject to the quality of
38.16 materials available and the impact of the environment (traffic, climate, etc.) on cum
the structural design. Stabilization with RBI Grade 81 endeavors to increase
the quality of the project and reduce construction costs by improving the
properties of substandard, readily available material to comply with the
relevant specifications. 1. Materials Soil or Gravel Stabilizer agent, RBI Grade
81 Should be kept under cover and protected from moisture from the time of
purchase to the time of use. If material has been left exposed to environmental
elements, consult a RBI Grade 81 representative. It is preferable to stabilize a
soil with a continuously smooth gradation curve from the maximum particle
size to the smallest particle size with no excess or lack in certain particles.
Soilfix Chemical compound --- Cutting the pothole to regular shape, trimming
to provide firm vertical faces, removing all loose materials, cleaning of
surface, filling with a mix of aggregates (40mm downsize) & local soil
(except BC Soil) in 1:1 proportion duly adding 0.5 % of Soilfix Chemical
38.17 compound, mixing thoroughly, compacting & finishing etc., complete in cum
WBM layers for Pothole/Patch repairs. Ref: IRC SP 20 : 2002 : RURAL
ROADS MANUAL AND MORT&H SPECIFICATIONS FOR ROAD AND
BRIDGE WORKS ( 4TH REVISION )
CLAY HOLLOW BRICKS (Extruded) Providing and constructing thick clay
hollow brick masonry in cement mortar 1:6 using horizontal perforated clay
hollow brick with minimum crushing strength of 35 kg/sqcm including
scaffolding, curing etc., complete as directed at all levels. STANDARDS
Minimum Crushing Strength 35 Kg/Sqcm. U- Value 1.1 W/SqmK. Density
695 Kg /Cum. Water absorption <20 %. Reduces the energy consumption and
hence help to maintain comfortable temperature inside. Natural & Green
Building Product. *Ref: - IS 3952 Guidelines for use of horizontally
perforated clay bricks. Construction Methodology * All concrete surfaces of
38.18 beams and columns coming in contact with brick work is to be hacked. * Pre
wet the bricks before construction. * Use cement mortar slurry of 1:2 on the
hacked surface to create a roughened surface for proper bonding. * Use silt
free (less than 5%) sieved clean sand for mortar. * Place the marker course of
brick (1st course) after checking the vertical & horizontal alignment. And also
mark the vertical course up to beam bottom on the column to maintain the
equal mortar joints. * Mix mortar in proportion of 1:6 for 200 & 150 mm thick
walls and 1:4 for 100 mm thick walls using Farma box (Equal to 1 cement
bag) for measuring sand and a measuring can to standardize quantum of water
to get a consistent mix. Mix well for uniformity. Mix mortar in small
38.18.1 _do_ of size 400 x 200 x 200mm Sqm
38.18.2 _do_ of size 400 x 200 x1 50mm Sqm
38.18.3 _do_ of size 400 x 200 x 100mm Sqm
Dry Lean Concrete (DLC) for Profile correction of existing bituminous road
surface before carrying out White Topping Dry Lean Concrete (DLC) M-5 for
Profile correction of existing bituminous road surface before carrying out
White Topping Construction of dry lean cement concrete sub base layer over
existing scarified (to the depth of 25 mm with miller machine includes
mobilization, diesel and operating cost, includes cleaning by air blower/sand
blasting/ brooming etc.) bituminous road surface with coarse and fine
aggregate conforming to IS 383, the size of coarse aggregate not exceeding
38.19 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after cum
blending to be as per Table 600-1, cement content not less than 160 kg/cum,
optimum moisture content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed in ready mix
concrete plant or a batching plant (to ensure consistency) transported to site,
laid to the depth of 40 mm - 50 mm with a fixed form paver with electric
sensor, having gang mounted vibrators equally spaced with variable rpm and
atleast three integral steel tubes with 8-10 tonnes vibratory rollers for
screeding, levelling, compaction, finishing and curing, includes lifting/shifting
charges of paver, as per specifications complete, ( cement 160kgs. coarse
White Topping Providing and laying White Topping as per IRC:SP76-2008
over bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct
surface profile and to be paid separately) with unreinforced M-40 grade
pavement quality concrete (PQC)using polymeric synthetic fibre as per ASTM
(1116) such as polyester / polyethylene / polypropylene at 1.20 kg/cum, mixed
in batching and mixing plant or weigh batcher as per approved mix design to
achieve minimum flexural strength or modulus of rupture of concrete 4.50
MPa at 28 days limiting maximum water cement ratio to 0.40, transported to
38.20.1 site, laid with mechanical paver finisher, spread, vibrated, compacted and cum
finished in a continuous operation to the lines and grades as per drawing,
texture finishing of surface, spraying two layers of curing compound, curing
with water sprayed on hessian cloth coverd over concrete surface, groove
cutting to a depth of 1/3 of the slab depth and of width 3-5 mm as per design
(grove cutting to be paid separately). For thin white topping and ultra thin
white topping the groove cutting shall be 1.25mm x 1.25m grid) including cost
of all materal, side from work, labour and HOM of machineries etc. complete
as per specifications. - do - with unreinforced M40 grade pavement quality
concrete using 43 grade OPC @ 420 kg/cum, coarse aggregate, fine aggregate
White Topping Providing and laying White Topping as per IRC:SP76-2008
over bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct
surface profile and to be paid separately) with unreinforced M-40 grade
pavement quality concrete (PQC) using polymeric synthetic fibre as per
ASTM (1116) such as polyester / polyethylene / polypropylene at 1.20
kg/cum, mixed in batching and mixing plant or weigh batcher as per approved
mix design to achieve minimum flexural strength or modulus of rupture of
concrete 4.50 MPa at 28 days limiting maximum water cement ratio to 0.40,
38.20.2 transported to site, laid with mechanical paver finisher, spread, vibrated, cum
compacted and finished in a continuous operation to the lines and grades as
per drawing, texture finishing of surface, spraying two layers of curing
compound, curing with water sprayed on hessian cloth coverd over concrete
surface, groove cutting to a depth of 1/3 of the slab depth and of width 3-5
mm as per design (grove cutting to be paid separately). For thin white topping
and ultra thin white topping the groove cutting shall be 1.25mm x 1.25m grid)
including cost of all materal, side from work, labour and HOM of machineries
etc. complete as per specifications. - do - with un-reinforced M-40 grade
Pavement Quality Concrete (PQC) using 53 grade OPC at 315 kg/cum and
White Topping Providing and laying White Topping as per IRC:SP76-2008
over bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct
surface profile and to be paid separately) with unreinforced M-40 grade
pavement quality concrete (PQC)using polymeric synthetic fibre as per ASTM
(1116) such as polyester / polyethylene / polypropylene at 1.20 kg/cum, mixed
in batching and mixing plant or weigh batcher as per approved mix design to
achieve minimum flexural strength or modulus of rupture of concrete 4.50
MPa at 28 days limiting maximum water cement ratio to 0.40, transported to
38.20.3 site, laid with mechanical paver finisher, spread, vibrated, compacted and cum
finished in a continuous operation to the lines and grades as per drawing,
texture finishing of surface, spraying two layers of curing compound, curing
with water sprayed on hessian cloth coverd over concrete surface, groove
cutting to a depth of 1/3 of the slab depth and of width 3-5 mm as per design
(grove cutting to be paid separately). For Thin white Topping and ultra thin
white topping the groove cutting shall be 1.25mm x 1.25m grid) including cost
of all materal, side from work, labour and HOM of machineries etc. complete
as per specifications. - do - with un-reinforced M-40 grade pavement quality
concrete (PQC) using 53 grade OPC at 357 kg/cum and cementitious material
Providing groove cutting for width of 4mm - 6mm and 1/3rd depth of PQC
Whitetopping within 8-10 hrs of placing/finishing of PQC including cost of
cutting machine, generators, HOM of machinery, blades, coolant etc.,
including cleaning of groove and providing sand and hot bituminous or
equivalent approved sealant filling etc., including cost of conveyance of all
materials, labour, lead and lift charges and all other incidental charges as per
drawing and as per specifications.Cement Concrete White Topping/Concrete
Overlay as per IRC: SP: 76-2008 White topping is defined as a PCC (Portland
Cement Concrete) overlay constructed on the top of an existing bituminous
38.21 pavement. Thus, it is a rehabilitation or structural strengthening alternative on M
bituminous pavement. Rutting of pavement is a real problem in a country like
India, with heavy truck loads, operating under frequent start/stop conditions. It
is commonly applied where rutting of bituminous pavements is a recurring
problem, particularly in case of city roads. Concrete over lays offers the
potential for extended service life, increased structural capacity, reduced
maintenance requirements and lower life-cycle costs when compared with
bituminous overlay alternative Concrete overlays have been used on both
bituminous (flexible) pavements since 1918 and existing concrete pavement
since 1913.White topping is classified into three types, based on the thickness
Use of GEO Textiles / GEO fabrics in road pavements and subsurface
drainage works. Providing and Inserting Prefabricated Vertical Drain, core
with synthetic material and wrapped with Non-woven geotextile 120GSM in
very soft clay for quick consolidation. Ref: IRC SP 59 : GUIDELINES FOR
38.22 USE OF GEO TEXTILES IN ROAD PAVEMENT S AND ASSOCIATED M
WORKS- 2002 Technical Data; -do- with 100mm width ,thickness =
4mm,mass per linear meter 90g/m,with tensile strength =2.0 KN -do
Providing and Laying Needle punched and mechanically bonded Nonwoven
Geotextile indigenously manufactured from high quality synthetic fibres on
the prepared subgrade for separator cum filtration cum drainage application
with necessary overlaps as per drawing. Technical Data : _ do_with GSM
150,1.3mm thickness,Grabtensile strength 540N, Puncture strength
315N,Trapezoidal tear 230N,Apparent opening size 180 ?m, _do_200Gsm,1.6
mm thickness,Grabtensile strength 720N,Puncture strength 400N,Trapezoidal
tear 300N,Apparent opening size 150?m _do_250Gsm,1.8 mm thickness,
Grabtensile strength 865N,Puncture strength 525N,Trapezoidal tear
38.23 360N,Apparent opening size 150?m _do_300Gsm,1.9 mm thickness,
Grabtensile strength 1010N,Puncture strength 650N,Trapezoidal tear 415N,
Apparent opening size 120?m _do_400GSM,2.5 mm thickness, Grabtensile
strength1325N,Puncture strength 785N,Trapezoidal tear 510N, Apparent
opening size 106?m _do_500GSM,2.9 mm thickness, Grabtensile
strength1570N,Puncture strength 910N,Trapezoidal tear 600N, Apparent
opening size 90?m _ do_ 600GSM,3.4 mm thickness, Grabtensile
strength1980KN,Puncturestrength 1080N, Trapezoidal tear 705N, Apparent
opening size =70?m Application Methodology; These contribute to road
structure strength by providing separation between the base course aggregate
and underlaying, weaker soils, maintaining the structural integrity of the
Providing and Laying Needle punched and mechanically bonded Nonwoven
Geotextile indigenously manufactured from high quality synthetic fibres on
the prepared subgrade for separator cum filtration cum drainage application
38.23.1 with necessary overlaps as per drawing. -do-with GSM 150,1.3mm Sqm
thickness,Grabtensile strength 540N, Puncture strength 315N,Trapezoidal tear
230N,Apparent opening size 180 ?m,
_do_ copper and synthetic rope gabion of size 1mx1mx1m, aperture 100mm x
38.24.1 Box
100mm
_do_ copper and synthetic rope gabion of size 1mx1mx2m, aperture 100mm x
38.24.2 Box
100mm
_do_ copper and synthetic rope gabion of size 1mx1mx3m, aperture 100mm x
38.24.3 Box
100mm
Providing and Synthetic Biaxial Geogrid indigenously manufactured from
selected high tenacity synthetic yarn with high molecular weight (> 25000
g/mol), and low carboxyl end group (<30mmol/kg) for soil reinforcement
application for stabilisation, requirement of geogrid strength in both direction
with granular fill. Technical Data; -do- ultimate tensile strenth 30Kn/m in MD
and CMD, Tensile strenth at 2% elongation 6Kn/m in MD and 6Kn/m in CD,
aperture size in MD and CD 26X26mm. -do- ultimate tensile strenth 40Kn/m
in MD and CMD, Tensile strenth at 2% elongation 7.5Kn/m in MD and
7.5Kn/m in CD, aperture size in MD and CD 25X25mm -do- ultimate tensile
38.25 strenth 60Kn/m in MD and CMD, Tensile strenth at 2% elongation 9Kn/m in
MD and 7.5Kn/m in CD, aperture size in MD and CD 25X25mm -do- ultimate
tensile strenth 90Kn/m in MD and CMD, Tensile strenth at 2% elongation
11Kn/m in MD and 9Kn/m in CD, aperture size in MD and CD 23X23mm
Application Methodology; Biaxial geogrids are designed for applications
where strength requirement is in both directions. They are used in
reinforcement of granular roadbase and subbase, area stabilization, trackbed
stabilization, load transfer platforms,etc.
i) Center Shutter Fixed: center shutter frame made of section with size 36mm
x 58mm should be fitted with 5mm thick plain float glass of reputed make,
38.35.1 EPDM gasket all around the glass and fixed to the Outer Frame with the Sqm
supporting section of size 29mm x 20mm of 0.58mm thick fixed horizontally
on top and bottom of the shutter frame
ii) Center Shutter Sliding: center shutter frame made of section of size36mm x
58mm should be fitted with 5 mm thick plain float glass of reputed make. The
supporting guide section of size 15mm x 19mm of 0.58mm thick fixed
38.35.2 horizontally at top and bottom of shutter frame and slides along the bottom Sqm
and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick
and 29mm x 20mm of 0.58mm thick.
Steel Windows with grill and flymesh for residential buildings vProviding and
fixing of windows made of pre-painted steel (base steelas per IS 513 of
0.58mm tick galvanized as per IS 277 with zinc of 120GSM). Primer coated
with epoxy primer of 5-7 microns thick, finishpainted with a polyester paint of
12-16 microns thick and back coatedwith 5-7microns thick alkyd backer.
Section for outer frame should beof 72x55mm, centre mullion should be of
72x50mm, section of the fixed glass beading should be of 12x12mm. and
section of the shutter shouldbe of 48x25mm. Outer frame and mullion sections
38.36 to have rebate forglazed shutters, fly mesh and 20mm provision for guard
bars/grill flymesh shutters section should be of 20x40mm. The sections are to
becut to length mitre joined with corner bracket. Centre mullion is to befixed
with mullion cap. Handle latch 2 Nos of heavy duty stainless steelpivot hinges
shall be provided for shutter. The window should be ledwith 50mm thick plain
float glass and S.S. Mesh for fly mesh shutter(304 grade). Rubber gaskets are
to be provided all around the glass. The above frames should be fixed to the
concrete/masonry wall bymeans of self-expanding screws, including 10mm
square guard barswith 6
38.36.1 Double shutter window with vertical mullion 3 Sqm
38.36.2 Centre fixed both side openable shutter window 5 Sqm
Steel Windows with grill for residential buildings Providing and fixing of
windows made of pre-painted steel (base steel as per IS 513 of 0.58mm tick
galvanized as per IS 277 with zinc of 120GSM). Primer coated with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7microns thick alkyd backer. Section for
outer frame should be of 48x50mm, centre mullion should be of 48x50mm,
section for shutter should be of 48x25mm and fixed glass beading section
should be of 12x12mm. Outer frame and mullions to have rebate for glazed
38.37 shutter and a 20mm provision for guard bars/grills. The sections are to be cut
to length mitre joined with corner bracket. Centre mullion is to be fixed with
mullion cap. Handle stay 2Nos of stainless steel heavy duty pivot hinges shall
be provided for shutter. The window should be panelled with 5mm thick plain
float glass. Rubber gaskets are to be provided all around the glass. The above
frames should be fixed to the concrete/ masonry wall by means of self
expanding screws, including 10mm square guard bars with 6
For single lane for formation width of 7.50mtrs. and using SDBC mix
38.39.1 Unit
meterial.
For Intermediate lane for formation width of 9.00mtrs using SDBC mix
38.39.2 Unit
material.
38.39.3 For 2 lane for formation width of 12mtrs. using SDBC mix material. Unit
Providing road humps for the entire formation width, using bituminous premix
materials and heavy duty cobble stones 60 mm thick, having road hump
dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing
WBM (2 layers) for shoulder portion 1.7mts in length on either side,
38.40 completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro
reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988)
38.40.1 For single lane for formation width of 7.50mtrs. and using BC mix meterial. Unit
38.40.2 Intermediate lane for formation width of 9.00mtrs using BC mix material. Unit
38.40.3 2 lane for formation width of 12mtrs. using BC mix material. Unit
Providing, laying, rumble strips, 250 mm wide and 25mm height in
rectangular shape at 1.00 mtr center to center for the entire formation width of
road using pre mix bituminous material, including providing WBM (2 layers)
for shoulder portions, applying tack coat, providing 2 Nos. retro reflective
38.41.1
traffic signs as per IRC SP 67-2010 (for details IRC 99-1988) For 3 nos -
including Wbm layers for length of 2 mtrs on either side of carriage way in
shouldr portion.
Providing & fixing of glazed Openable Window made out of multi chambered
uPVC sections with TPV gaskets having isolated drainage and reinforced with
Galvanixed iron profiles throuhout the window. The outer frame having a
overall size of 60x55 mm with reinforcement of 1 mm thickness, mullion with
overall size of 74x60 mm with reinforcement of 1 mm and sash with overall
38.44.2 size of 75x60 mm with reinforcement of 1.5 mm thickness. Glazing bead for Sqm
fixing of glass shall be of size 34x20 mm and coextruded with gasket.
Windows shall be provided with 5mm plain float glass, standard hardware &
single point locking system of flush lock, Wall thickness of frame, mullion &
sash shall be 2-2.2 mm.
Providing & fixing of Top hung Ventilator With Exhaust Fan Provision made
out of multi chambered uPVC sections with TPV gaskets having isolated
drainage and reinforced with Galvanized Iron profiles through out the
Windown. the outer frame having a overall size of 60x55 mm with
reinforcement of 1 mm thickness, Mullion with overall size of 74x60 mm with
38.44.4 reinforcement of 1 mm thickness and Sash with overall size of 75x60 mm Sqm
with reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall
be of size 34x20 mml coextruded with gasket, Ventilator shall be provided
with 4.5 mm Pin Head glass, standard hardware, single point locking and
friction stays,. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.
Providing & fixing of glazed 3 Track - 2 Panel Sliding Windown With Mesh
made out of multi chambered uPVC sections with TPv gaskets having isolated
drainage and reinforced with GI throughtout the window. the sliding outer
frame having a overall size of 108x45 mm with reinforcement of 1 mm
thickness, sash with overall size of 39x58 mm with reinforcement of 1.5 mm
thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of
38.44.5 GI. Glazing bead for fixing kof glass shall be of size 20x18mm and Sqm
coextruded with gasket. Fiber Glass mesh shall be provided in mesh shutter.
Windows shall be provided with 5 mm plain float glass, standard hardware
and single point locking system of flush lock. Wall thickness of frame,
mullion & sash shall be 2-2.2 mm.
Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out of multi
chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles through out the window. The sliding
outer frame having a overall size of 60x45 mm with reinforcement of 1 mm
thickness, super sas with overall size of 39x75 mm with reinforcement of
38.44.6 1.5mm thickness. Glazing bead for fixing of glass shall be of size 20x18 mm Sqm
and coestruded with gasket. Fiber Glass mesh shall be provided in mesh
shutter. Window/Door shall be provided with 6 mm plain float glass,
stgandard hardware & multi point locking system of patio espagnolette. Wall
thickness of frame, mullion & sash shall be 2-2.2 mm.
38.44.7 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door With Mesh Sqm
Specification for uPVC Openable window Providing& fixing of Openable
window made out of multi chambered UPVC(Matching to RAL-9016)
sections and with minimum Ti02(Titanium Dioxide) at 6PHR with
TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour
having isolated drainage and reinforced with Galvanized Iron profile through-
out the openable frame. The frame having overall size of 60mm x 55mm with
Gl reinforcement of 1mm thickness and openable sash with overall size of
38.44.8 Sqm
6Dmm x 75mm and Gl reinforcement of 1.5mm thickness. Glazing bead for
fixing of glass shall be of size 2Dmm x 34 mm. Windows shall be provided
with 5mm plain float glass, Standard hardware with friction hing & Multi
point locking system with Handle. Wall thickness of frame & sash shall be of
2mm- 2.5mm. Maximum possible size- 900mm x 1819mm.
Consultancy services for Preparation of Land Plan Survey for state Highways
and major District roads The entire Land Survey Plan should be carried out
using LiDAR Technology only, Collection of all the relevant information for
50 Mtr on either side from The entire Land Survey Plan should be carried out
using LiDAR Technology only, Collection of all the relevant information for
50 Mtr on either side from centre of the road, Details of Structures (if any),
Cross Drainage Structures, Arboriculture counts and other Assets, which have
been developed as a part of the road furniture / development. Establishing the
Primary Control Points (Horizontal Control), using the DGPS at every 1000
38.45 meters interval and secondary control points at every 500 meters and also at Km
important and salient locations, such as major inter sections, Village / Town
limits etc.,. The DGPS controls will be so established that it meets the
minimum criteria specified for carrying out the mapping activities on a scale
of 1:5000 or 1:10000. (Inclusive of all taxes) NOTES: (a) The DGPS control
points established will be further extended using the total station for
densification so that there are Control Points for every 200 m interval at
staggered locations. All Physical details shall be picked up for a width of 50M
from the center line on either side of the road. Primary control points shall be
a properly monumented using Cement Concrete Pillar (RCC) of size 230 mm
Providing and fixing self-supported, ribbed, high quality, high grade (D:350
MPA Yst Min ), pre- painted Galvalume steel roof sheet, coated with bare
Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip
process , of total coated thickness as specified for different spans with a
tolerance of +/- 0.02 mm, according to technical specification confirming to A
792, with NCCA ll-1, or ECCA T4 Pencil hardness HB, NCCA standard T-
Bend test. The roof should be fastened to the gutter beam, on the external
sloping side, at an interval of 51mm Centre to Centre, to a depth of 65 mm
with GI anchor bolts and neoprene washers & subjecting the gutter beam to
38.46 Schmidt, Hammer test to ensure the anchorage of the anchor bolts. The self-
supported roofing system should be designed to with stand the wind load (As
per IS 875 part-3) & Earthquake load (as per IS 1893) & the design should
also comply with any other technical requirements such as turbo ventilators of
0.60 mts. dia and skylights of size 4.26 x 0.60 mts. fixed one in each row @
10.00 Mtr C/C along the length & hangers for electrical fixtures as per the
requirements including cost of all materials &labour for erection, all lead and
lift, loading and unloading, HOM of machineries etc., complete as per the
standard detailed technical specification, design and directions of the engineer
in charge of the work.
(a) Span : 9 Meters upto 15 Meters (b) Material Specification: Colour Coated
38.46.1 Galvalume Sheet, weighing 10.10 kg/sqm BMT: 0.80 MM, APT : 0.85 MM, Sqm
tolerance +/- 0.02mm
a) Span :Above 15 Meters upto 18 Meters (b) Material Specification: Colour
38.46.2 Coated Galvalume Sheet, weighing 11.35 g/sqm BMT: 0.90 MM, APT : 0.95 Sqm
MM, tolerance +/- 0.02mm
(a) Span : Above 18 Meters upto 21 Meters (b) Material Specification: Colour
38.46.3 Coated Galvalume Sheet weighing 12.57kg/sqm BMT: 1.00 MM, APT : 1.05 Sqm
MM, tolerance +/- 0.02mm
(a) Span : Above 21 Meters upto 23 Meters (b) Material Specification: Colour
38.46.4 Coated Galvalume Sheet weighing 13.80kg/sqm BMT: 1.10 MM, APT : 1.15 Sqm
MM, tolerance +/- 0.02mm
(a) Span : Above 23 Meters upto 25 Meters (b) Material Specification: Colour
38.46.5 Coated Galvalume Sheet, weighing 15.16kg/sqm BMT: 1.20 MM, APT : 1.25 Sqm
MM, tolerance +/- 0.02mm
(a) Span : Above 25 Meters upto 27 Meters (b) Material Specification: Colour
38.46.6 Coated Imported Galvalume Sheet, weighing 16.40 kg/sqm BMT: 1.30 MM, Sqm
APT : 1.37 MM, tolerance +/- 0.02mm
(a) Span :Above 27 Meters upto 30 Meters (b) Material Specification: Colour
38.46.7 Coated Imported Galvalume Sheet, weighing 17.63 kg/sqm BMT: 1.40 MM, Sqm
APT : 1.47 MM, tolerance +/- 0.02mm
(a) Span :Above 30 Meters upto 32 Meters (b) Material Specification: Colour
38.46.8 Coated Imported Galvalume Sheet, weighing 18.87 kg/sqm BMT: 1.50 MM, Sqm
APT : 1.57 MM, tolerance +/- 0.02mm
(a) Span : Above 32 Meters upto 35 Meters (b) Material Specification: Colour
38.46.9 Coated Imported Galvalume Sheet, weighing 20.10kg/sqm BMT: 1.60 MM, Sqm
APT : 1.67 MM, tolerance +/- 0.02mm
Providing and applying a heat reflecting anti-fungal water based, flexible,
water proofing, roof coating for use on Roof/Terrace/Parapet. by formulating
38.47 the undercoat with polymer modified cementations water proof slurry mortar
and top coat consisting of 100% Acrylic Elastometric Ploymers embedded
with heat reflecting particles. For surfaces having cracks less than 5mm.
do: - in high rainfall areas(Two layers of under coat plus two layers of top
38.47.1 Sqm
coat)
do: - in low rainfall areas(One layers of under coat plus two layers of top coat)
38.47.2 Sqm
Loosening of the ground upto a level of 500mm below the subgrade level,
watered, graded and compacted in layers to meet requirement of table 300-2
for subgrade construction complete as per specifications. Case-I : Compacting
original ground supporting subgrade using chemical stabilizer like
38.48.4 nanotechnology based organosilane or equivalent (confirming to the required cum
spec.) mixed in water @ 0.5kg/cum and 1% cement by weight of soil, (which
includes water charges & compaction by vibratory roller). MORTH
Specification No. 305.3.4
Door Frame - Internal: Providing & fixing factory made Galvanized plain
steel door frame of profile size 125 x 60 mm single rebate manufactured from
galvanized plain steel sheet 1.25 mm thick, conforming to IS: 277. The door
frame consists of hinge jamb, lock jamb, head & bottom tie bars, supply in
knockdown condition & to be assembled on site by mechanical means with
the special miter joint. The bottom tie bar made out of galvanized plain steel
sheet 1.60 mm thick pressed angle 20 x 20 mm to be screwed to the door
frame. The 4 nos. of G.I. Lift off hinge 100 x 67 x 2 mm to be projected
38.49.2 welded to the door frame. The necessary stiffeners & mortar guards to be RMt
provided for fixing hardware fixtures. The door frame to be powder coated
after pre-treatment of the surface. The door frame shall be filled with 1:3:6
cement concrete & to be fixed with adjustable lugs/ hold fasts. Alternatively,
dry fixing shall be permitted by using metallic expansion bolt. The rate is
including transportation, loading, unloading, HOM etc. but excluding the
hardware fixtures. size 900 x 2130 mm
Providing and mixing Alkali resistant integral glass fibers HD 67/36 to act as
a replacement of steel reinforcement in supported slabs and to provide
secondary reinforcement in concrete at 5 kg / cum of concrete, fibers of length
36 mm, diameter 19 microns,specific gravity 2.68, modulus of elasticity 72
38.53 Gpa and having the aspect ratio (length/dia) of 67, including cost of cum
labour,materials and HOM of machineries etc complete.(Note:The work to be
carried out with prior permission of the competent authourity.) ( NOTE: Rate
is for cum of concrete)
Light gauge steel frame structure (LGSFS) for drywall panel system Providing
and fixing factory finished custom designed structurally stable, corrosion
resistant, cold formed wall structure, trusses, joists, purlins, connection
accessories etc , made out of 0.95 mm thick galvanized steel coils, (AZ- 150
gms, Aluminium-Zinc alloy coated steel) having minimum yield strength of
550 M pa, using computerized cold forming machine to 'C' type sections
having a minimum web thickness of 89 mm, flange width 40 mm with 10mm
lip as per drawings conforming to AISI specifications and IBC 2009 for cold
formed steel and construction confirming to Indian standards as per IS 800-
38.60 1984, IS 801-1975, IS 875- 1987(Part Ill) and IS 1893, the LGS frames shall Kg
be manufactured using computerized machine duly punched with dimple,
service holes and slots at required location and supplied in assembled state
using self tapping screws with corrosion resistant coating in accordance with
ASTM 8633 of specified pitch as per requirements or in a dismantled state ,
and mounted /firmly fixed to the existing plinth beam using self expandable
carbon steel anchor bolts, 12 mm dia and 121 mm in length conforming to
AISI304 & 306 standards@ 500 mm c/c with a minimum embedment of 100
mm in RCC located at 300 mm from corners or from bottom LGS frames
confirming to Specifications including all costs of labour, materials,
Providing and fixing with internal and external cement fibre boards/ coir
composite boards to LGSFS Dry wall panel system Providing and fixing for
both external and internal faces of Light Gauge Steel Frame Structure in two
layers, sandwiching a breathable vapour barrier in between layers as per NBC
code 2009, with external face having a 6mm thick heavy duty fiber cement
board/coir composite board fixed on a 9mm thick heavy duty fiber cement
board/coir composite board confirming to IS 148622000, Category IV type A
or equivalent in standard sizes and internal face with 12.5rnm thick gypsurn
plaster board/coir composite board fixed on Bmm thick fiber cement
38.61 board/coir composite boards confirming to IS 14862:2000 of category Ill type Sqm
B (High pressure steam cured) or equivalent ,as per standard sizes with self
drilling tapping screws half counter sunk, rib head of 1.60mm to 4rnm thick, 8
to 10 gauge, length varying from 25 to 45mm I fasteners @ 600mm c/c of
approved make, with a staggered vertical joint of 2rnm to 3mm sealed with a
silicon based sealant and smooth finished using fiber mesh tape and Epoxy
and acrylic based joining compound for seamless finish and the material and
process of manufacture and assembly/erection confirming to Specifications
including all costs of labour, materials, fabrication, assembling, transportation,
erection, incidental and unforeseen charges complete as per the directions of
Providing and fixing with EPS -weld mesh-cement-sand shotcrete wall panels
to LGSFS. Providing and fixing in position factory made expanded
polystyrene core (EPS core) panels 90 mm thick having a density not less than
10 kg per cum. to both faces of LGSFS FOR WALLS and covered on both
sides with welded wire fabric mesh made of 2.2mm dia Gl wire with 50mm
pitch in both the directions, connected by Gl wire of 3mm dia to the LGS
frame structure duly plaster finished with shotcrete plastering/ guniting
equipment in required layers, 30mm thick with cement mortar 1:3 {1 cement:
38.62 3 coarse sand not having more than 40% stone chips of size upto 6mm} at a Sqm
pressure not less than 1 bar (100 KN/m2) and both faces finished with trowel
and completed in all respect as per drawings and specifications confirming to
Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per the
directions of the engineer in charge of the work.
Providing and fixing with EPS -weld mesh-cement-sand shotcrete roof/floor
panels to LGSFS Providing and fixing in position factory made expanded
polystyrene core (EPS core) panels 90 mm thick having a density not less than
10 kg per cum. to both faces of LGSFS FOR ROOF/FLOOR PANELS and
covered on both sides with welded wire fabric mesh made of 2.2mm dia Gl
wire with 50mm pitch in both the directions, connected by Gl wire of 3mm dia
to the LGS frame structure duly plaster finished with shotcrete plastering/
guniting equipment in required layers, 30mm thick with cement mortar 1:3 {1
38.63 cement: 3 coarse sand not having more than 40% stone chips of size upto Sqm
6mm)} at a pressure not less than 1 bar (100 KN/m2) and both faces finished
with trowel and completed in all respect as per drawings and specifications
confirming to Specifications including all costs of labour, materials,
fabrication, assembling, transportation, erection, incidental and unforeseen
charges complete as per the directions of the engineer in charge of the work.
Providing and fixing in position half paneled window shutters with wood
plastic composite styles and rails of 30rnm thick, 65mm wide and with 4mm
thick reeded glass panels fixed in the groves provided in the styles and rails
and the material and process for manufacturing the window shutters
38.68 confirming to Specifications including all costs of labour, materials, Sqm
fabrication, assembling, transportation, erection, incidental and unforeseen
charges complete as per the directions of the engineer in charge of the work,
but excluding the cost of fixtures and painting.
Providing and supplying water proofing membrane of size 1m X 5m with 6.4
mm thick having a puncture resistance of 620 N as per ASTM D 4833 and
hydrostatic pressure resistance upto 70 m as per ASTM D 5385 consisting of
Bentonite granuals weighing 4.80 kg/sqm encased between needle punched
non-oven geotextile covered with HOPE sheet of 200 microns thick and
uncovered oven geotextile on the other side laid over levelling concrete to
arrest subsurface water with a staggered over lapping of 100 mm and with a
minimum staggered lapping of 300 mm at the corners and the laps secured by
38.69 washer headed mechanical fasteners spaced at 300 mm c/c and the lap joints Sqm
are sealed with Bento seal of not lessthan 19 mm thick and the terminated
ends of water proofing membrane is covered with aluminium strip and Bento
seal.,complete including the cost of lapping, materials, labour, complete as per
specifications. Ref: ASTM D 4833, ASTM D 5385, ASTM D 3776, ASTM D
903, ASTM D 5084, ASTM D 4632,ASTM D 1970,ASTM E 96.
Providing and fixing Sacrificial Anode for damaged RCC Member such as
slab, beam, column etc Providing and fixing zinc alloy based galvanic disk
38.74 type sacrificial anodes (50 mm dia, 18 mm thick) to the reinforcement and Sqm
pass 500 hours salt spray test as per ASTM B 117, The anode shall be
connected to the reinforcement steel by connectors provided with the anode.
Furnishing Work
Item Code Item Description Unit
Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood
frame work at spacing not exceeding 60Dmm c/c fixed to the wall and top
covered out of 4mm thick approved quality Veneer, fixed over 12mm thick
39.1 ply of approved brand, termite and water resistant, finished with melamine Sqm
polish, complete including cost and conveyance of all materials, labour for all
items of work HOM etc., complete as per specification.
Providing and fixing Acoustic Veneer paneling, over the 50mm x 35mm sal
wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled
with 50mm thick 32kg density glass wool and top covered out of 4mm thick
approved quality Veneer, fixed over 19mm thick ply strips of 1OOmm to
39.2 200mm with a gap of 6mm to 1Omm in between strips of approved brand, Sqm
termite and water resistant, finished with melamine polish, complete including
cost and conveyance of all materials, labour for all items of work, HOM
complete as per specification.
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using
19mm thick vinyl bonded water proof block board, shutters allround ward
robe, lockable drawers with sliding channels, cupboard drapery hangers,
curtain rods with end brackets, openable shutters with 19mm x 6mm thick
plain teak wood beading, lipping 1.5mm thick commercial ply vertical support
finished in approved 1mm lamination sheet of approved colour, shade and
quality on all exposed surfaces. Inner surface painted with 2 coats of white
39.3 Sqm
synthetic enamel paint over 2 coats of Patti, one coat of wood primer,
including cost of brass fittings, parliamentary hinges, C handles, tower bolts,
magnetic catches, approved brand lock, adhesives, synthetic resins, nails,
screws etc., complete including cost of all materials, labour charges, complete
as per specification.
Providing and fixing storage unit of 0. r5m depth made out of 19mm thick
commercial ply vertical support finished in approved 1.00mm laminate with
12mm thick ply packing internally finished with enamel paint of approved
colour and shade shelves shall be formed out of 19mm ply finished with
39.4 enamel paint of approved shade and colour and 19mm thick shutters formed Sqm
out of 19mm thick ply finished with 1.00mm thick laminate of approved shade
and colour etc., complete the rate includes cost of all materials, labour
charges, complete as per specification.
Providing and fixing Single shutter glass door of 12mm thick plain toughened
glass. The door is fixed by using any approved make hardware fitting like
patch fitting, pivot, floor machine, locking arrangements and suitable SS door
39.5 rails with floral glass etching for 1/3 portion of door area etc complete. The Sqm
rate includes cost of all materials, labour, hire of tools & machineries, and as
per specification.
Providing and fixing Double shutter glass door of 12mm thick plain
toughened glass of approved make. The door is fixed by using any approved
make hardware fitting like patch fitting, pivot, floor machine, locking
39.6 arrangements and suitable SS door rails with floral glass etching for 1/3 Sqm
portion of door area etc complete. The rate includes cost of all materials,
labour, hire of tools & machineries, as per the specification.
Providing and fixing Single shutter glass door of 12mm thick frosted
toughened glass of approved make. The door is fixed by using any approved
make hardware fitting like patch fitting, pivot floor machine, locking
39.7 arrangements and suitable SS door rails with floral glass etching for 113 Sqm
portion of door area etc complete. The rate includes cost of all materials,
labour, hire of tools & machineries, as per specification.
Providing and fixing Double shutter glass door of 12mm thick frosted
toughened glass of approved make. The door is fixed by using any approved
make hardware fitting like patch fitting, pivot, floor machine, locking
arrangements and suitable SS door rails with floral glass etching for 113
39.8 portion of door area etc complete. The rate includes cost of all materials, Sqm
labour, hire of tools & machineries, as per specifications etc complete. The
rate includes cost of all materials, labour, hire of tools & machineries, as per
specifications.
Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module
size of 600x600x19mm with Exposed grid. The tiles should have Humidity
Resistance (RH) of 99%, Light Reflectance 87%, Thermal Conductivity k =
0.052 - 0.057 w/m K, NRC -0.7,Colour White, Fire Performance UK A2 S1,
dO, with Anti Microbial coating on the face of the tile, suitable for zone 4 area
according to NF S 90-35:2003 with cleanroom class of ISO 5 (Class 100),
Decontamination Class of CP1Oand Bacteriological Cleanliness Class B1 for
specific strains and reduction in colony size. Washability properties of 500
wash cycles as per ASTM D-4828 and suitable for Green Building application
39.12.1 with Recycled content of 37%. The tile shall be laid on 24mm wide T - section Sqm
flanges colour white having rotary stitching on all T sections i.e. the Main
Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a
load carrying capacity of 15 Kgs/Sqm& pull out strength of minimum 100
Kgs. The T Sections should have a Galvanizing of 90 grams per Sqm and need
to be installed with Suspension system of approved make.
Providing and supplying Acoustical Wall Paneling' with square edges made of
fibre glass substrate 25mm thick and wrapped on the front side with an
acoustically transparent and classified for Fire reaction Class A, as per ASTM
E-84, fabric with option of colors - as per the choice of the Architect/Engineer
39.12.2 incharge of the size 600x600mm, 600x1200mm & 600x1800mm providing a Sqm
minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall
panel lmpalersand construction adhesives as per the instructions laid down by
the certified manufacturer.
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in
module size of 600 x 600 x 16mm with Exposed Grid. The tiles should have
Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance <o87%,
Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire
Performance UK Class 0 I Class 1 (BS 476 pt- 6 &7)and suitable for Green
Building application with Recycled content of 30%. The tile shall be laid on
24 mm wide T - section flanges colour white having rotary stitching on all T
39.12.3 Sqm
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web
height of 38mm and a load carrying capacity of 15Kgs/sqm&pull out strength
of minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams
per Sqm and need to be installed with Suspension system of approved make.
Teak wood platform: Providing and fixing wooden platform of overall size
2450x1850x175mm using teak wood of section 50x50mm of legs, 50x50mm
for horizontals both at suitable intervals from the point of view of stability, the
top of the platform covered with commercial block board of 25mm thick, all
sides covered with 6mm thick one side teak plywood fixed firmly to the
39.13.2 platform including joining the wooden sections properly using nails/screws, Sqm
fevicol including cost of wood, nails/screws, fevicol, cost of
painting/polishing complete as per specification including cost of all materials
and labour, painting, lead & lift and as per the direction of Engineer-in-Charge
of the work and also as per drawing appended.
Horse Shoe Table: Providing and fixing "HORSE SHOE TABLE" of overall
size 4500 x 2200x 750mm using teak wood of size 100x1OOmm for legs at
suitable intervals, 50x75mm section for horizontal support at top, 50x1OOmm
section horizontal support at bottom as shown in figure. The top of the table
which should be 600mm in width all along, is covered with 19mm thick block
board and 1.50mm thick formica sheet fixed on top of the block board, all of
approved make. The inside vertical surface is covered with 6mm thick one
39.13.3 side teak plywood, including providing teak wood beeding alround the table Sqm
for good aesthetic appearance, including joining the wooden sections properly
using nails/screws, fevicol complete as per specification including cost of all
materials and labour, painting, lead & lift and as per the direction of Engineer-
in-Charge of the work and also as per drawing appended.
Teak wood witness box: Providing and fixing witness box of overall size
1200x750x1350mm with one side door way as shown in figure using teak
wood of size 75x75mm for legs, 50x75mm size for horizontal support at top
and bottom, and 25x50mm size section for verticals between legs with a
spacing of 150mm including fixing 19mm thick commercial block board for
full area at bottom and for a length of 300mm at top to facilitate keeping the
39.13.4 file during the course of witness including JOining the wooden sections No
properly using nails/screws, fevicol including cost of wood, nails/screws,
fevicol, cost of painting/polishing complete as per specification including cost
of all materials and labour, painting, lead & lift and as per the direction of
Engineer-in-Charge of the work and also as per drawing appended.
Teak wood Accused box: Providing and fixing accused box of overall size
3000x1150x1350mm with one side door way as shown in figure using teak
wood of size 75x75mm for legs, 50x75mm size for horizontals at top and
bottom and 25x50mm size for verticals between legs with a spacing of 150mm
including fixing 19mm thick commercial board for full area at bottom,
including joining the wooden sections properly using nails/screws, fevicol
39.13.5 including cost of wood, nails/screws, hinges, locking arrangements for the No
opening, fevicol, cost of painting/polishing complete as per specification
including cost of all materials and labour, painting, lead & lift and as per the
direction of Engineer-in-Charge of the work and also as per drawing
appended.
39.23.1 75mm thick frames tile based system (Frame with Tile) Sqm
39.23.2 75mm thick frames tile based system (Frame with Glass) Sqm
Storage Unit - wooden - One side laminate Providing and fixing woode
storage unit one side laminate with 18 mm PLY/PLPB with edge bound for
body, 18mm PLY/PLPB with openable shutters and individual locking system
for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting
39.24
hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt.
complete as per specifications, drawings and as directed by Engineer in charge
Mobile pedestal unit- METAL Providing and fixing 450mmw X 450 mmd X
685 mmht ) Mobile pedestal unit- Metal with MS CRCA sheet powder coated
for body, Two equal drawer and one filing drawer with centralized locking
39.26 system, Telescopic channels, castors, Handles and lock etc., complete as per No
specifications, drawings and as directed by Engineer in charge.
Mobile pedestal unit- METAL with wooden facia Providing and fixing
450mmw X 450 mmd X 685 mmht ) Mobile pedestal unit- Metal with wooden
facia made of MS CRCA sheet powder coated for body, 18 mm thick PLPB
with edge bonded facia, Two equal drawer and one filing drawer with
39.27 No
centralized locking system, Telescopic channels, castors, Handles and lock
etc., complete as per specifications, drawings and as directed by Engineer in
charge
Providing ABC Powder based MAP 50, 1Kg Providing 1kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 2.3 Kg, empty weight 1.3 Kg, Can Height 298MM,
Diameter 86.50MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A,
40.1 B Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system etc.,
complete
Providing ABC Powder based MAP 50, 2Kg Providing 2kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM,
Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A,
B Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve
40.2 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with
Superior quality EPDM Rubber Hosepipe etc., complete.
Providing ABC Powder based MAP 50, 4Kg Providing 4kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM,
Diameter 140MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A,
B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
40.3 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 50, 6Kg Providing 6kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM,
Diameter 160MM, Discharge Time less than 9 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 3A,
B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
40.4 Each
Construciton : Forging and Mechining, Internal Coatingof Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing ABC Powder based MAP 50, 9Kg Providing 9kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM,
Diameter 175MM, Discharge Time less than 13Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 4A,
B Rating 34B, Can construction : Deep drawn & Co., Mig welded, valve
40.5 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 2.00MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 90, 2Kg Providing 2 kg Fire Extinguisher
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM,
Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A,
B Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve
40.6 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 90, 4Kg Providing 4kg Fire Extinguisher
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM,
Diameter 140MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A,
B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
40.7 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 90, 6Kg Providing 6kg Fire Extinguisher
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight9.40 Kg, empty weight 3.4 Kg, Can Height 480MM,
Diameter 160MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 3A,
B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
40.8 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 90, 9Kg Providing 9kg Fire Extinguisher
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM,
Diameter 175MM, Discharge Time less than 13Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 4A,
B Rating 34B, Can construction : Deep drawn & Co., Mig welded, valve
40.9 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 2.00 MM, Helium Leak Detection Tested, ISI and EN
Approved, 5 years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete
Providing ABC Powder based MAP 90, 25Kg Providing 25kg Fire
Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type,
Pressure Gauge, Gross Weight 76Kg, empty weight 51 Kg, Can Height 1200
MM, Diameter 300 MM, Discharge Time less than 30 Secs, Controllable
discharge mechanism (Squeeze grip with easy snap safety seal), Range
minimum 6 meters, applicable on Class A,B,C and electrically started Fire,
40.10 Can construction : Deep drawn & Co., Mig welded, valve Construciton: Each
Forging and Mechining, Internal Coating of Can: Epoxy powder coating,
External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 4.00 MM, 1 year Warranty. with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete
Providing Ceiling mounted 5 Kg Providing 5kg Fire Extinguisher Mono
Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge,
Gross Weight 7.7Kg, empty weight 2.7 Kg, Can Height 264 MM, Diameter
240 MM, Discharge Time less than 8 Secs, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 10 meters,
40.11 applicable on Class A,B,C and electrically started Fire, Can construction : Each
Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining,
Internal Coating of Can: Epoxy powder coating, External Coating of Can:
Epoxy Polyster power coating, Sheet metal thickness: 2.00 MM, Helium Leak
Detection Tested, 5 years warranty. etc., complete
Providing 6Kg Fire Extinguisher for Heavy metal fires SPM-PYRO Providing
6Kg Powder Based stored presure type melting point at 1200 degree C,
Applicable on Class D metal fires in heavy metals, alkali metals and alloys
Pressure Guage, Gross weight Gross Weight 9.4Kg, empty weight 3.4 Kg,
Can Height 480MM, Diameter 160 MM, Discharge Time less than 16 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 meters, Can construction : Deep drawn & Co., Mig welded,
40.20 Each
valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 1.60 MM, helium leak detection tested, EN approved, 5
years warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing 9 Kg Fire Extinguisher for Heavy metal fires, SPM-PYRO
Providing 9Kg Powder Based stored presure type melting point at 1200 degree
C, Applicable on Class D metal fires in heavy metals, alkali metals and alloys
Pressure Guage, Gross Weight 14.9Kg, empty weight 5.90 Kg, Can Height
615MM, Diameter 175 MM, Discharge Time less than 18 Secs, Controllable
discharge mechanism (Squeeze grip with easy snap safety seal), Range
minimum 4 meters, Can construction : Deep drawn & Co., Mig welded, valve
40.21 Each
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 2.00 MM, helium leak detection tested, EN approved, 5
years warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing 2Kg Fire Extinguisher Clean Agent HCFC 123 Providing 2Kg
Pressure type, Pressure Guage, Gross Weight 3.7Kg, empty weight 1.7 Kg,
Can Height 344MM, Diameter 108 MM, Discharge Time less than 8 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 2 meters, applicable on Class A,B,C and electrically started
Fire, B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
40.22 Construciton : Forging and Mechining, Internal Coating of Can: Epoxy Each
powder coating, External Coating of Can: Epoxy Polyster power coating,
Sheet metal thickness: 2.00 MM, helium leak detection tested, EN approved, 5
years warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing 5Kg Ceiling Mounted Fire Extinguisher Clean Agent HCFC 123
Providing 5Kg Stored Pressure Type, Pressure Gouge, Gross Weight 7.7kg.
empty weight 2.7 kg Can Height 267MM, Diameter 230 MM, Discharge Time
less than 8Secs,Auto discharge mechanism, on temperature rise, applicable on
Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
40.25 CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating Each
of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster
Powder coating, Sheet metal thickness: 1.60MM, Helium Leak Detection
Tested, 5 Years Warranty
Providing 10Kg Ceiling Mounted Fire Extinguisher Clean Agent HCFC 123
Providing 10Kg Stored Pressure Type, Pressure Gouge, Gross Weight 14.8kg.
empty weight 4.8 kg Can Height 316MM, Diameter 300 MM, Discharge Time
less than 10Secs,Auto discharge mechanism, on temperature rise, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
40.26 CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating Each
of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster
Powder coating, Sheet metal thickness: 2.0MM, Helium Leak Detection
Tested, 5 Years Warranty
Providing 2Kg Fire Extinugisher Clean Agent FE36 Dupont Providing 2Kg
Stored Pressure Type, Pressure Gauge, Gross Weight 3.70kg. empty weight
1.7 kg Can Height 344MM, Diameter 108 MM, Discharge Time minimum 8
Secs, Controlable discharge mechanism, Range minimum 2 Meters, applicable
on Class A,B,C and electrically started Fire B, Rating 8B, Can Construction;
40.27 Deep drawn & CO,Mig welded, Valve Construction: Forging & Machining, Each
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium
Leak Detection Tested, 5 Years Warranty with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete
Providing 4Kg Fire Extinugisher Clean Agent FE36, Dupont Providing 4Kg
Stored Pressure Type, Pressure Gauge, Gross Weight 6.9kg. empty weight 2.9
kg Can Height 440MM, Diameter 140 MM, Discharge Time minimum 13
Secs, Controlable discharge mechanism, Range minimum 4 Meters, applicable
on Class A,B,C and electrically started Fire A, Rating 1A, B, Ranting 13B,
Can Construction; Deep drawn & CO, Mig welded, Valve Construction:
40.28 Forging & Machining, Internal Coating of Can : Epoxy Powder coating, Each
External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, 5 Years Warranty with
instalert system with Superior quality EPDM Rubber Hosepipe etc., complete
Providing 6Kg Fire Extinugisher Clean Agent FE36, Zeri ODP Providing 6Kg
Stored Pressure Type, Pressure Gauge, Gross Weight 9.4kg. empty weight 3.4
kg Can Height 480MM, Diameter 160 MM, Discharge Time minimum 13
Secs, Controlable discharge mechanism, Range minimum 4 Meters, applicable
on Class A,B,C and electrically started Fire A Rating 5A, B, Ranting 34B,
Can Construction; Deep drawn & CO, Mig welded, Valve Construction:
40.29 Forging & Machining, Internal Coating of Can : Epoxy Powder coating, Each
External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, 5 Years Warranty with
instalert system with Superior quality EPDM Rubber Hosepipe etc., complete
Providing 9Kg Fire Extinugisher Clean Agent FE36, Zeri ODP Providing 9Kg
Stored Pressure Type, Pressure Gauge, Gross Weight 13.8kg. empty weight
4.8 kg Can Height 611MM, Diameter 175 MM, Discharge Time minimum 12
Secs, Controlable discharge mechanism, Range minimum 4 Meters, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
40.30 CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating Each
of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster
Powder coating, Sheet metal thickness: 1.60MM, Helium Leak Detection
Tested, 5 Years Warranty
Providing 5Kg Ceiling Mounted Fire Extinugisher Clean Agent FE36, Zeri
ODP Providing 5Kg Stored Pressure Type, Pressure Gauge, Gross Weight
7.7kg. empty weight 2.7kg Can Height 267MM, Diameter 230 MM,
Discharge Time less than 8 Secs,Auto discharge mechanism, on temperature
rise, applicable on Class A,B,C and electrically started Fire, Can Construction;
40.31 Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Each
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium
Leak Detection Tested, 5 Years Warranty
Providing 10Kg Ceiling Mounted Fire Extinugisher Clean Agent FE36, Zeri
ODP Providing 10Kg Stored Pressure Type, Pressure Gauge, Gross Weight
14.8kg. empty weight 4.8kg Can Height 316MM, Diameter 300 MM,
Discharge Time less than 8 Secs,Auto discharge mechanism, on temperature
rise, applicable on Class A,B,C and electrically started Fire, Can Construction;
40.32 Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Each
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium
Leak Detection Tested, 5 Years Warranty
CO2 2Kg Squeeze grip Providing 2 Kg CO2 Gas Type Fire Extinugisher
Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1
Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge
Time less than 8 Secs, Controllable discharge mechanism, Applicable on
Class B&C Fire, B Rating 8B, Can Construction : Hot spinning/Forging,
40.33 Valve Construction : Forging & Machining, Internal Coating of Can : Not Each
Applicable, External coating of Can : Spray Painting, Sheet metal thickness :
4.0MM ISI Approved, 1 Year Warranty.with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete
CO2 4.5Kg Squeeze grip Providing 4.5Kg CO2 Gas Type Fire Extinugisher,
Trolley Mounted, Easy Weight Management used Unused Mechanism,
Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height
860MM Diameter 140MM, Discharge Time less than13 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, B Rating 13B, Can
40.34 Constuctin : Hot spinning/Forging, Valve Construction : Forging & Each
Machining, Internal Coating of Can : Not Applicable, External coating of
Can : Spray Painting, Sheet metal thickness : 4.5MM ISI Approved, 1 Year
Warranty. with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing 4.5Kg CO2 Wheel Type Providing 4.5Kg CO2 gas valve type Fire
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height
860MM Diameter 140MM, Discharge Time less than13 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, B Rating 13B, Can
40.35 Constuction : Hot spinning/Forging, Valve Construction : Forging & Each
Machining, Internal Coating of Can : Not Applicable, External coating of
Can : Spray Painting, Sheet metal thickness : 4.5MM ISI Approved, 1 Year
Warranty.with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete
Providing 6.5Kg CO2 Wheel Type Providing 6.5Kg CO2 Gas valve type Fire
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 30.5 Kg. empty Weight 24.0 Kg. Can Height
1015MMDiameter 140MM, Discharge Time less than 13 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, B Rating 34B, Can
40.36 Constuctin : Hot spinning/Forging, Valve Construction : Forging & Each
Machining, Internal Coating of Can : Not Applicable, External coating of
Can : Spray Painting, Sheet metal thickness : 4.5MM ISI Approved, 1 Year
Warranty. with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
Providing 22.5Kg CO2 Wheel Type Providing 22.5Kg CO2 Gas Type Fire
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 93.5 Kg. empty Weight 71.0Kg. Can Height
1333MM Diameter 232MM, Discharge Time less than20 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, Can Constuction: Hot
40.37 spinning/Forging, Valve Construction : Forging & Machining, Internal Each
Coating of Can : Not Applicable, External coating of Can : Spray Painting,
Sheet metal thickness : 5.20 MM ISI Approved, 1 Year Warranty. complete
Providing CO2 Aluminium - 2kg Providing 2Kg CO2 Gas aluminium body
Squeeze grip Fire Extinugisher, Used Unused Mechanism, Squeeze Grip,
Gross Weight 5.16 Kg. empty Weight 3.16Kg. Can Height 615MM Diameter
111MM, Discharge Time less than 8 Secs, Controllable discharge mechanism,
40.38 Applicable on Class B&C Fire, B Rating 13B, Can Constuction : Cold Impact Each
Extrusion, Valve Construction : Forging & Machining, Internal Coating of
Can : Not Applicable, External coating of Can : Spray Painting, Aluminium
metal ISO & PESO Approved, 3 Year Warranty. complete
Providing Water - 9 Ltr - Stored Pressure Providing 9 Ltr Water type Fire
Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg.
empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time
less than 120 Secs, Controllable discharge mechanism (Squeeze grip with easy
snap safety seal), Range minimum 6 Meters, applicable on Class A Fire, A
Rating 3A, Can Construction; Deep drawn & CO, Mig welded, Valve
40.42 Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder Each
coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet
metal thickness: 2.0MM, ISI and EN Approved, Helium Leak Detection
Tested, 1 Years Warranty with instalert system with Superior quality EPDM
Rubber Hosepipe etc., complete
Providing Water - 50 Ltr Providing 50 Ltr Fire Extinugisher Water Type,
External Cartidge, Pressure Gauge, Gross Weight 108kg. empty weight 58kg
Can Height 1200MM, Diameter 300 MM, Discharge Time less than 180 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 10 Meters, applicable on Class A Fire, Can Construction;
40.43 Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Each
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 4.0MM, 1 Years
Warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete
Providing CQRS 4.5 Kg - Direct high Pressue System Providing CQRS 4.5Kg
- Direct High Pressue System - Gross Weight 14.73 Kg, Empty Weight 13.23
Kg, Can Height 735 MM, Diameter 139MM, Can construction : Hot
Spinning/Heat Treatment, Valve Construction : Forging / Machining, External
40.55 Each
Construction : Epoxy Powder Coating, Sheet Metal Thickness: 4.2MM, 1
Year warranty, Valve, Brass, Cylinder thread : 25E, Dip tube thread M10x1,
Outlet thread: W21, 8x1/14
Providing CQRS 6.5Kg - Direct High Pressue System Providing CQRS 6.5Kg
- Direct High Pressue System - Gross Weight 23.2 Kg, Empty Weight 16.7
Kg, Can Height 980 MM, Diameter 139.7MM, Can construction : Hot
Spinning/Heat Treatment, Valve Construction : Forging / Machining, External
40.56 Each
Construction : Epoxy Powder Coating, Sheet Metal Thickness: 4.5MM, 1
Year warranty, Valve, Brass, Cylinder thread : 25E, Dip tube thread M10x1,
Outlet thread: W21, 8x1/14
Wireless Siren Strobe External Wireless Siren - a fuly supervised Power Code
40.61 Each
Exacavation in all sorts of soil for laying pipes upto 100mm dia including
forming bottom surface to required level, refilling seleted excavated earth
40.77 around the pipe in layers of 150mm thick, watering consolidating and cum
disposing off the surplus earath within the stie or as directed by the site
engineer etc. complete Depth upto 1.0m
40.106 SITC of 7AM-12 V Battery for fire alaram system Make EXIDE/AMCo Each
40.107 Providing and Fixing Fire force board size of 3 Each
Supplying Installing, testing and commissioning of Public address system
(Two way comminication type) as per requirement of Fire Force authority and
40.108 which Generally comprise of Supplying Installing, testing and commissioning Each
of Approved make 5 W.wall mounted speaker with talk back facility with
store enamel painted M.S.Sheet hosing etc. complete
Energy Conservation
Building Code
Energy Conservation
Building Code
Providing and fixing expanded polystyrene (EPS) 30mm thick with density 20
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.10.6 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
Providing and fixing expanded polystyrene (EPS) 40mm thick w ith density
20 kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.10.7 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
Providing and fixing expanded polystyrene (EPS) 60mm thick with density 20
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.10.8 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
Providing and fixing expanded polystyrene (EPS) 75mm thick with density 20
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.10.9 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
Providing and fixing expanded polystyrene (EPS) 1OOmm thick with density
20 kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.10.10 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
41.13.1 coat of neat cement, including necessary polymerized plaster reinforced with Sqm
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 12mm thick
OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
41.13.2 coat of neat cement, including necessary polymerized plaster reinforced with Sqm
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 25mm thick
OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
41.13.4 coat of neat cement, including necessary polymerized plaster reinforced with Sqm
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 50mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.1 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 25mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.2 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 40mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.3 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 50mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.4 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 65mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.5 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 75mm thick
OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm
resin bonded rock wool slab having density 48kgs/cum for over deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
complete (excluding cost of screed concrete which is to be measured and paid
41.14.6 seperately) with all lead and lift, transportation charges, loading unloading Sqm
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 1OOmm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.1 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 25mm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.2 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 40mm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.3 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 50mm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.4 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 65mm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.5 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 75mm thick
UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool
resin bonded rock wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc.,
41.16.6 complete with all lead and lift, transportation charges, loading unloading Sqm
charges ,all taxes, cost of all materials, labour, HOM scaffolding etc.,
complete ROCK wool slab 1OOmm thick
Basic
Rate
7959
6409
5637
4865
4449
4093
3736
3499
5789
5134
4812
4614
3567
3047
4295
3443
5684
6853
6445
6167
5619
5311
5032
5410
5315
14379
11287
8825
7500
3933
3398
3101
2864
278
Basic
Rate
249
349
299
449
686
1421
739
2042
2192
201
121
403
2107
549
2281
3045
3471
324
361
20
35
52
68
741
313
61
Basic
Rate
205
106
86
46
251
79
251
29
Basic
Rate
5318
5212
5102
5039
5406
5522
5408
153
220
5896
5741
6129
5974
442
499
33
14
14
209
155
124
1080
263
408
580
750
920
1170
1430
1690
1940
2190
2460
2780
3080
450
361
456
990
292
410
823
329
558
556
602
520
826
336
252
120
250
290
58
58
70966
68815
748
5444
5444
5497
5598
5804
6009
5084
5187
5392
5710
5893
655
360
991
436
621
424
644
300
4963
Basic
Rate
2370
3556
3677
4254
5260
5362
6550
6850
7071
312
489
1128
897
1495
2092
591
150
58
11
918
905
918
893
963
925
913
954
812
455
446
412
702
913
99
105
Basic
Rate
5893
6853
6941
6749
6858
7048
9368
9456
9646
9836
6319
6396
7210
7287
7453
9883
9960
10126
10292
938
940
915
904
770
867
813
831
5229
1125
1504
1694
2067
Basic
Rate
5211
3180
2729
2133
2607
482
3913
3338
95
4266
4375
4351
4473
3723
3903
4776
4861
4734
4795
3364
3432
3977
4018
6131
6220
3940
4400
6653
10535
8380
2500
2600
2000
4400
4500
5250
5350
2500
3210
3550
3
111
128
132
151
149
179
2840
5369
3012
6021
5378
Basic
Rate
1158
636
346
1995
3014334
990
30143.34
374
60286.68
15
3014.334
300
211
1068
797
662
384
419
365
432
391
512
1327
1479
596
161
1167
72
345
3126
1504
721
686
543
590
Basic
Rate
4987
109315
91146
59350
50914
195585
110579
92410
60613
60613
8332
5593
4904
7826
5314
4673
7320
5035
4443
6900
4756
3132
7370
4963
6863
4683
6256
4348
6004
4181
4212
4192
4057
3901
3913
3953
3653
3634
3499
7988
5859
5123
4496
6928
5154
4540
4143
6398
4801
4249
3552
3517
6979
5294
4711
4392
6316
4852
4347
3878
5795
4509
4058
3526
5170
3984
4772
3719
4374
3454
6074
4648
4143
3663
2876
2589
1369
930
793
2777
468
3746
2798
1785
2000
250
250
3250
3800
2400
360
3000
3800
450
550
400
874
715
820
11109
45613
3200
2900
3702
3156
2308
3944
3350
2550
4065
3580
2793
2350
1532
2128
1437
1655
Basic
Rate
979
1009
240
411
526
216
254
88
0.35
577
2767
1875
803
Basic
Rate
245
368
487
536
579
631
682
744
874
244
410
456
492
513
584
656
728
794
374
582
685
788
799
923
1055
1187
1317
764
929
1084
1183
1256
1430
1630
1824
2009
14856
24520
29602
35234
46453
86788
47674
277
254
237
2694
3492
4461
7113
8539
5300
3800
1600
746
7932
829
9096
963
431
606
989
1252
1580
1909
2894
3661
4646
Basic
Rate
3506
4224
1331
2067
4956
4807
3072
4165
5814
7091
2984
3832
4495
5157
4975
8073
10985
13897
3389
5161
6747
8439
4007
3149
3879
3021
2807
3288
3026
4605
4082
3493
4114
3559
3260
14254
8860
6454
1157
828
1136
874
1481
1082
739
674
666
634
324
507
435
414
974
315
352
1078
798
705
933
705
560
1078
1078
456
829
788
570
860
653
445
933
1078
507
523
435
990
653
451
912
705
622
1047
580
508
435
674
425
726
830
756
698
129
111
93
705
560
1078
580
328
308
58
1029
175
265
225
210
165
240
900
850
950
150
190
280
250
285
60
50
20
23862
434
688
853
1354
2075
ork
Basic
Rate
203
240
311
361
447
512
157
157
157
144
177
250
283
356
388
596
750
1001
1494
483
879
1320
190
173
236
141
141
139
139
140
138
272
336
449
830
1040
1739
2103
2221
343
359
513
161
209
241
234
264
242
246
707
750
587
740
947
1330
1728
2143
2403
475
747
903
1269
1579
1929
2198
107
129
190
228
261
297
326
380
450
556
627
235
262
328
372
425
498
595
741
107
107
118
129
6828
395
414
447
486
562
734
242
120
160
210
179
214
254
357
510
589
265
305
350
466
648
751
171
198
229
316
448
527
130
157
196
254
337
465
206
235
293
374
126
146
179
226
292
432
1410
1800
2450
4250
6563
5574
4586
5437
1047
1570
210
260
330
140
180
250
350
500
130
180
220
300
550
670
800
1200
1320
2260
Basic
Rate
1152
1114
2429
3243
1186
1055
1113
354
667
610
36
408
636
707
1256
1381
1290
1457
1573
1494
1546
40
49
701
807
649
775
1071
1174
1135
1239
1124
1211
1349
1349
3583
324
342
1168
1272
1633
1276
3869
1099
1035
977
1137
7195
2740
2409
1401
2739
2380
2623
1753
3543
760
4457
3525
540
360
270
180
1835
3476
2392
3472
2052
1980
1233
1134
1213
1034
2448
2330
1500
12350
4800
2720
560
Basic
Rate
142
140
142
141
207
204
45
47
212
205
194
235
222
209
277
262
246
290
273
255
236
225
9
12
206
193
19
32
26
31
36
28
12
13
11
102
15
35
3
73
20
14
110
46
87
90
56
37
89
102
34
51
47
34
43
46
42
50
50
97
55
62
55
87
45
51
45
202
107
93
47
60
40
33
56
50
41
95
61
74
48
46
40
37
85
55
71
46
44
43
1347
1397
1380
1341
30
332
388
345
304
856
1038
4.5
5.5
12
25
16
22
14
19
14
40
27
35
23
33
30
68
340
180
439
78
ngs
Basic
Rate
9
10
65
45
93
84
93
64
26
215
181
122
1084
613
523
577
766
1082
112
16071
13995
10361
124
175
179
40
35
36
804
620
64
67
171
49
155
45
139
41
293
276
260
321
296
99
1
11
13
es -
Basic
Rate
57
111
152
661
798
803
717
Basic
Rate
299
922
2243
3489
6977
543
1031
2360
7149
25755
10
15
77458
103406
18526
22907
454
557
1589
390
739
248
351
207
186
289
351
248
227
207
248
665
1893
1426
14
723
153
21
267
362
619
899
87
12
18
469
277
55
66
137
168
217
nd
Basic
Rate
130
179
164
445
1201
578
1813
161
41
56
373
1183
182
47
33
6
111
578
241
5680
77
121
331
80
39
40
24
90
39
30
3
324
95
348
36
23
16
105
58
72
12
13
103
46
85
16
103
23
92
296
208
46
218743
1050
17
204
1100
207
2349
48
374
704
7187
1805
2326
76387
70
Basic
Rate
2373
1272
1886
1753
380
446
476
788
2380
2347
2139
1993
2293
2042
274
133
1888
175
209
683
362
Basic
Rate
21
5
126
45
34
14
23
12
5843
6287
5714
5802
5671
5759
386
6760
7301
6625
7166
6577
7121
7177
7701
7157
7680
7110
7635
7079
7593
7058
7572
7205
7527
7311
7851
7291
7829
7246
7784
8905
9622
8883
9601
8838
9556
8179
8466
8041
8328
7995
8282
8337
8632
8201
8496
8155
8450
10094
10486
10074
10466
10028
10420
94
76
138
141
154
157
143
145
170
172
163
161
58
44
741
43
12939
11220
11740
28
32
31
67
70
89
123
6810
9449
10807
5575
5594
4357
4377
152
146
6964
7464
6942
7443
6897
7398
7055
7566
7034
7544
6988
7499
7945
8219
7500
8081
7651
8232
8053
8333
7608
8195
7758
8345
10177
10115
Basic
Rate
3595
3675
3399
3169
5458
5506
5363
5409
5162
5207
3411
4901
4823
4664
68
135
100
6932
Basic
Rate
661
754
72
3760
ngs
Basic
Rate
80
3466
2472
3073
4004
3001
4913
6876
7146
70647
9525
82
72
79
0.7
146
125
130
111
429
3453
2154
546
1852
476
204
340
509
1433
1219
3172
1959
3044
1745
2362
714
10815
6990
1739
3212
4712
67467
1343
1292
762
290
411
4591
2490
3829
8471
16789
524
549
51
2476
788
353
2961
445
4668
13297
15785
Basic
Rate
22689
22836
22982
7711
7803
7814
4669
7481
8375
3750
6052
8839
1725
2971
4981
1157
1941
3760
5089
5746
5482
4751
5638
5051
5756
5069
5910
5315
4433
65066
65649
51703
1389
2416
4416
Basic
Rate
114966
701981
4595
76975
6321
6515
6813
4926
5475
5814
5942
5992
6045
6093
6265
5741
5358
4733
5804
5050
6471
5146
6684
5309
5246
5544
6471
4478
5125
5423
5517
6151
4836
5497
5006
5761
5078
5881
5238
5373
2436
3195
3269
4101
3953
4736
4106
5192
4557
5586
9488
10438
21236
25747
4706
5178
3194
7024
4101
6497
5013
7200
5394
7732
6651
8311
10956
17696
25857
39777
5850
9136
17357
11977
13580
15538
17186
38133
82714
17896
15607
20182
20913
23662
24639
53475
110329
26242
57421
2709
68589
356
286
652
551
1660
1934
3004
3850
Basic
Rate
195
251
335
50
57
73
279
332
413
60
69
82
586
639
719
471
551
631
902
614
145
3099
349
4926
5063
4385
4267
5120
5322
4943
5036
5082
5124
5169
5305
Basic
Rate
5440
5867
5655
6154
5365
6062
6411
5458
6167
6522
5266
5950
6293
5414
6118
6470
5506
6222
6580
5651
6385
6753
65298
65980
147
697
2091
359
20
1123
0.6
1121
363
Basic
Rate
6322
6575
6829
6788
6999
6575
6829
7083
7429
7695
6518
6780
7042
7009
7229
6780
7042
7304
7658
7932
6672
6940
7209
7558
7660
6940
7209
7477
7838
8118
6747
7024
7300
7652
7940
7023
7300
7576
7940
8227
7852
8404
8956
9666
10241
7554
7630
7889
8149
8408
7170
7411
7652
8351
8649
6366
6611
6856
7227
7489
7102
7592
8083
8799
9322
6022
6267
6513
6758
7003
6480
6731
6982
7380
7652
7233
7735
8237
9008
9551
7269
7777
8285
8784
9059
7338
7852
8365
8867
9144
66869
67419
1702558
on
Basic
Rate
1613
2155
5456
2342
1613
5456
4546
6132
118
3060
5254
Basic
Rate
1194
2485
119
155
34
1081
13951
16621
13939
6234
7627
Basic
Rate
313
1742
1712
2638
1552
5522
9840
10167
22694
400
66
406
nd
nd
Basic
Rate
99
71
558
136
250
247
676
396
446
266
391
573
394393
287371
257347
14428
11211
3653
299
578
244
375
205
230
Basic
Rate
4188
9049
10146
18161
20360
1534
2583
3192
3468
5502
8428
391
528
1056
1440
2160
2671
3384
5639
5260
5362
6550
6850
6870
5384
142
140
141
142
447
180
45
257
55
540
434
4670
4979
Basic
Rate
123
28
15
191
340
332
43
54
12
54
330
422
184
191
367
551
336
Basic
Rate
236
323
1467
Basic
Rate
57
73
859
715
408
32
416
206
237
407
102
102
686
686
26
611
792
87
84
131
86
102
49
25
15
257
49
359
131
157
523
419
786
568
1417
987
68
126
303
329
379
299
449
33600
686
1683
296
1260
394
34902
649
27189
802
92625
74
33800
49
27648
99
3542
25
69420
740
16800
247
10077
247
58584
247
23159
271
33038
49
82391
37
115881
86
300601
7
52130
25
108993
1489
20377
1483
197 154450
99 19332
142500
6862
90250
6670
104500
5500
335742
3500
17000
6900
914
2011474
1493
1743
1639
1949
1081
Basic
Rate
430
625
980
450
360
95
475
150
490
95
350
500
17
38
680
1263
1771
2357
2944
3529
2923
3722
4503
2467
3248
4029
4810
2603
3136
865
678
656
3410
5815
5618
5446
92
73
91
94
95
103
109
110
136
1160
2142
3214
112
129
160
196
100
120
138
160
183
205
258
294
125
2589
2276
2366
2187
2142
3750
3258
3303
3214
3125
295
688
660
452
5399
5907
5985
6659
6249
4062
4200
4145
3722
4050
3900
31393
36769
47499
34222
37899
49002
17286
16856
21208
24529
23785
31008
42556
41064
55509
60556
58311
79976
362
471
2008
3026
3632
4540
5220
4917
5675
5675
5448
4500
1560
1650
1740
1875
2175
2150
2185
2320
2410
490
437
790
660
794
632
610
545
430
477
440
2140
2230
2500
0
214452
3100
1670
4824
5235
5600
5910
6185
155
2960
2890
3020
2000
700
1300
3850
2200
880
340
226
1459
330
892
120
Basic
Rate
3739
6311
10752
13070
8936
8046
9388
8508
15414
55
900
2484
4660
1510
1646
1576
7232
6300
9820
24730
37500
18030
17410
11830
12990
21820
22760
14340
14950
50000
62000
32000
47300
34900
51600
21000
23390
11960
10700
7010
7850
7294
7544
4240
5200
5750
6690
8920
9375
12050
20000
63800
4800
5268
6964
10000
17678
6830
9820
16960
4900
6250
5800
rk
Basic
Rate
2298
3447
4788
5819
7661
4420
6188
7661
12571
29464
10803
16597
5304
8250
13848
10607
14732
20625
23571
35357
53036
16205
32213
45571
41838
66785
23079
40758
66490
44196
54017
54214
11097
16303
9723
14732
41250
9723
14143
7267
26518
6874
23571
21017
25142
33687
14731
13259
25142
97232
117857
135536
153214
88393
106071
120804
153214
37420
3832
9723
12964
3832
22098
4035
3041
1
2
1
6
7.5
1.9
15911
113041
95159
187500
79018
219
71429
257143
491071
74084
291225
223214
257143
312500
95159
6293
10125
1875
2679
6291
3839
4286
4643
446
714
1339
1988
1616
1230
979
865
763
654
618
571
321
223
179
134
16071
21429
31250
44643
93750
132143
165179
3041
1071
1607
268
86
29
1071
2634
2054
42857
84821
111607
28571
1339
33
1071
563
152
192
57
201
987
2179
2106
1890
1268
1131
993
878
820
762
tion
tion
Basic
Rate
1427
989
1162
449
738
1027
1317
886
1166
451
616
745
375
420
435
475
510
710
1056
1236
1273
617
927
1237
1547
1460
1815
2064
2976
2004
2163
2745
3327
667
820
973
1123
1199
515
589
744
859
1048
594
698
808
934
917
1604
1695
1786
1891
1912
1174
1349
1500
565
603
626
666
692
759
898
1075
585
628
655
703
733
812
789822
7898.22
15796.44
789.822
43
33600
1683
1260
34902
27189
92625
33800
27648
3542
69420
16800
10076
58584
23159
33038
82391
115881
300601
52130
108993
20377
154450
19332
142500
90250
104500
335742
17000
2011473
1943993 19439.93 38879.86 1943.993
Material Master
Item
Item Description Unit
Code
9 Adhesive(for flooring) Kg
509 Adhesive for tiles Kg
514 Adhesive for joints Kg
22 Bees Wax Kg
513 High bond tile adhesive for vitrified tiles Kg
2008 Fevicol kgs
2047 Ball Adhesives kgs
387 Shellac kgs
54 Brick bats 25 to 100 mm cum
55 Brick aggregate 20 mm(Nominal) cum
56 Brick aggregate 25 mm(Nominal) cum
64 Burnt brick class designation 35 ( Non Modular) Ground Moulded 100 Nos.
488 Table moulded bricks class designation 50 (non modular) 100 Nos.
505 Wire cut bricks of class designation 75 (non modular) 100 Nos.
396 Stainless steel kitchen sink of size 400x470mm with drain board of specific make Each
Stainless steel kitchen sink of size 500x1000mm with drain board of specific
397 Each
make
Stainless steel kitchen sink of size 510x1575mm with drain board of specific
398 Each
make
440 White glazed fire clay kitchen sink of size 600x450x250mm Each
441 White glazed fire clay kitchen sink of size 750x450x250mm Each
442 White glazed fire clay laboratory sink of size 450x300x150mm Each
443 White glazed fire clay laboratory sink of size 600x450x200mm Each
White glazed/vitreous china clay 10 lts low level flushing cistern, with fittings
446 Set
and \brakets and 40mm white C.P flush pipe
449 White vitreous china clay angle back wash basin size 500x400mm Each
450 White vitreous china clay angle back wash basin size 600x480mm Each
White vitreous china clay flat back lipped front urinal basin of 430x260x350mm
451 Each
size
453 White vitreous china clay flat back large urinal basin size 580x380x350mm Each
454 White vitreous china clay flat back wash basin size 450x330mm Each
455 White vitreous china clay flat back wash basin size 550x400mm Each
456 White vitreous china clay flat back wash basin size 630x450mm Each
457 White vitreous china clay squatting plate Each
458 White vitreous china clay surgeon type wash basin size 660x450x265mm Each
White vitreous china clay wall corner type, lipped front urinal basin of size
460 Each
'340x410x265mm
487 C.P. brass tap with union Each
491 Rectangulur shape mirror of size 453x357mm with plastic moulded frame Each
546 ceramic tiles of size 30x30cms Sqm
2035 Colour Glazed tiles 30x60cms 6mm thick Each
2096 L. Bracket Nos.
542 Galvanized L brackets Nos
2079 Granite sink 23cm thick Each
2098 Rubber Gaskete M
83 Caustic soda kgs
92 Chiken mesh Sqm
168 GI plaster mesh 0.35 mm thick 10 cms wide M
251 Mosquito proof coupling 25 mm Each
295 Plaster mesh 100mm wide M
296 Plaster mesh 150mm wide M
297 plaster mesh 200mm wide M
318 Rabbit wire mesh Sqm
548 Weld Mesh 75mmx25mm of 6G to 10G Sqm
549 Weld Mesh 75x50mm of 6G to 10G Sqm
729 Copper plate 12 m long x 250 mm wide kgs
Wire create size(1.8x1.8mx0.9m)=2.916(4mm dia 2GI wire in 15 cms x 15 cms
796 kgs
mesh)
797 Wire mesh 50 mm x 50 mm Sqm
816 Form work for kerb stone/KM stone Sqm
104 Cinder ballast cum
93 Chlorophriphos emulstiable concentrate L
65 Burnt lime/shell lime qtl
141 Fly ash cum
142 Fuel (firewood) qtl
210 Kerosene oil L
215 Lime cum
216 Lime surkhi mortar 1:2 cum
263 Mud mortar cum
267 Nitric Acid L
299 Plaster of Paris kgs
394 Spirit L
412 Surkhi cum
436 Water proofing compound kgs
709 Admixture/Super Plasticizer L
715 Bentonite Tonne
741 Epoxy for mortar kgs
742 Epoxy for tack coat kgs
743 Epoxy material for fixing kgs
760 Joint filler (0.01 cm wide and 0.12mm wide) Sqm
761 Joint sealing com 25 mm deep kgs
811 Chloroperene C.C.
812 Natural Rubber C.C.
813 Neoprene kgs
818 Water KL
268 Nortlight adjustable ridges of 1.22m Pair
270 Nylon rollers Each
315 Putty for filling holes kgs
319 Rawl Plug 40 to 50mm Each
317 PVC Beading M
328 Roofing felt type-2 grade-1 fibre based self finish and bitumen based Sqm
329 Rubber heading for shutturs beading M
392 Spun yarn kgs
413 Suspension shaft M
516 Plastic sheet Sqm
527 Steel wool Pack
535 Glazing seal M
536 Weather Seal Nos
539 Specer tape Sqm
704 20mm thick compressible fiber band 12 m long x 25 cm deep Sqm
705 20 mm thick filler 12m long x 25 cm deep Sqm
737 Deviator Plates Tonne
Elastomeric slab with MS plates inserted inside polysulphine compound filling
740 C.C.
Space around Bolts and nuts
774 Nipples Each
788 Sheething duct ID M
809 PTFE Nodules Sq.Cm
810 PTFE Nodules cm
331 S.F.R.C. Cover and frame 560 mm (ID) heavy duty Each
850 Fine Grass Kgs.
851 Hedge plant Each
852 Flowring plants Each
853 Shrubs Each
854 Sapiling 2m high 25mm dia Each
855 Neem cake qtl
856 Empty bitumen drum Each
857 Rivets Each
858 Steel wire 3mm dia kgs
859 Sapling 1 to 1.5m high 2cm dia stem Nos.
861 Traffic cones with 150mm reflective sleeve Nos.
871 Flag of red color cloth 600x600mm Each
900 Supply of quarried stone 150-200 size cum
901 Stone boulder of size 150mm and below cum
910 Precast cement concrete tiles Tiles size 300x300mm and 25mm thick Nos.
1104 Jute Rope M
925 cold miling machine at 20cum per hour cum
927 Scrap types of size 900x20 Nos.
928 20mm steel wire rope Kgs.
933 Geotextile filter frabic Sqm.
934 perforated geosynthetic pipe 150mm dia M
935 Paving fabric Sqm.
936 Geogrids Sqm.
937 Connectors/staples Each
938 Polymer braids M
945 Hot applied thermoplatic compound L
946 Reflectorising glass beads Kgs.
Cost of approved type of delineators from ISI certified firm as per the standard
947 Each
drawing given in IRC:79
948 Barbed wire 335 metre length at 9.38 kg per 100 metre Kgs.
960 Sand bags(cost of sand in empty cement bag) No.
964 Admixture Kgs.
966 M 35 grade RCC corbel provided for supporting of euipment cum
971 NUTS AND Bolts Kgs.
Elastomeric slab seal expansion joint assembly manufactured by using
980 chloroprene, elastomer for elastomeric slab unit conforming to clause 9150.1 of M
IRC:83 (part II) conforming to clause 2600.6 of Morth specifications.
Preformed continuous chloroprene elastoemer or closed cell foam sealing sealing
982 element with high mtear strength vulcanised in a single operation for the full M
length of a joint ot ensure water tightness.
Supply of complete assembly of strip seal expansion joint comprising of edge
983 beams, anchorage, strip seal element and complete accessories as per approved M
specifications and drawings
Supply of a modular strip/box seal joint assembly comprising of edge beams,
central beam, 2 modules chloroprene seal, anchorage elements, support and
984 M
control system, all steel sections protected against corrision and installed by the
manufacturer or his
Supply of a modular/box/box seal joint assembly containing 3 modules/cells and
comprising of edge beams, two central beams, chloroprene seal, anchorage
985 M
elements, support and control system, all steel sections protected against
corrosion and installed by t
986 LDO L
990 Farmyard manure cum
991 Seeds Kgs.
992 Jute netting Sqm
994 Doob grass Kgs.
997 Accelerator compound for guniting Kgs.
998 Wire mess 50mm x 50mm size of 3mm wire Kgs.
1101 Sodium vapour lamp - 250 watt Each
Pre - packed ploymer concrete based on epoxy system complete with curing
1502 Kgs.
compound, intiator and promoter
1505 Quick setting compound Kgs.
1507 Acrylic polymer bonding coat L
1508 Pre-packed cement based ploymer mortar of strength 45 Mpa at 28 days Kgs.
Epoxy resin with pot life not less than 60-90 minutes and satisfying testing as per
1509 Kgs.
clause 2800.3.9
1514 bearing Neoprene No.
1521 Separation membrane of impermeable plastic sheeting 125 micron thick Sq.Cm
1522 Pre-moulded joint filler, 25mm thick for expansion joint Sq.Cm
1523 Joint sealant Kgs.
1524 Sealant Primar Kgs.
1525 Curing compound L
Super plasticizer admixture IS marked as per 9-103-1999 at 0.5% by wt. of
1526 Kgs.
cement
1552 Collar for AC pipe (average) Nos,
Elastomeric bearing assembly consting of 7 layers of elastomer bonded to 6 nos.
1555 reinforcing steel laminates by the process of vulcanisation, complete with all Nos.
components as per drawings and technical specifications.
Pot type bearing consisting of a metal piston supported by a disc,PTFE pads
providing sliding surfaces against stainless steel mating together with cast steel
1556 assemblies/ fabricated structural steel assemblies duly painted with all Nos.
components as per clause 2006 and complete as per drawings and technical
specifications
547 Expanded metal 12.5 mm to 25 mm -14 G Sqm
549 Weldmesh 75 x 50mm of 6g x 10g Sqm
552 Pesticide L
553 Granite slabs 7.5 cm to 8 cm thick Sqm.
559 15 mm bolt Nos.
560 60 x 60 x10 Guage sq.plate washer Kgs.
570 Sealant Kgs.
563 PVC Storage Tank L
564 12x12 guage GI wire 100 mtr at Ts. 8.00/m M
574 Steel Helmet and Cushion block Kgs.
930 Geonets Sqm
931 Geomembrane Sqm
932 Geotextile Sqm
2001 Carbon electrodes CC
2004 Screws 3.5" Nos.
2005 Screws 1.75" Nos.
2013 Latch, Pivot, Locking arrangements, SS door rails etc for glass doors Set
2023 Cast iron ornamental design Nos
2024 Cast iron arrows No
2025 Expansion bolt No
2052 Coconut Broom stick No.
2053 Bombay broom stick No.
2054 Squeezer / wiper / rubber brushes No.
2055 Coir brushes No.
2056 Bamboo baskets No.
2057 Plastic buckets 20 L capacity No.
2058 Trollies No.
2064 Cobble stone 65mm thick Sqm
2065 Cobble stone 80mm thick Sqm
2072 Welding rods Nos
2037 Ball beaing hinges heavy duty Nos.
2041 G.I. Coated expansion bolts Nos.
2048 Ball Joints kgs
2049 Design-Trowel Nos.
2059 Hose pipe 30m length No.
2061 Plastic Mug Each
2063 Bleaching Powder kgs
2066 Bronze multiwall polycorbonate G.E. make kgs
2070 Sealent taps Joint
2080 Mop stick - alluminium No.
2082 Disposable garbage bags size 0.9m x 1.5m Each
2087 RBI Grade 81 Tonne
2088 Safe and Easy/Equivalent Bio-degradable L
2093 Polymeric expansion joints filler - 12mm thick Sqm
2094 Polymeric expansion joints filler - 18mm thick Sqm
2095 Polymeric expansion joints filler - 22mm thick Sqm
2102 Crystallisation liquid kgs
2103 Isoproof kgs
2104 Acrylic kgs
2105 FCM kgs
2106 Non woven geo textile kgs
2107 Polysulphide /acrylic sealant kgs
2112 Empty Sand / cement bag No.
9001 Gulty Trap No.
2097 5mm Semi finished PVC Sheet Sqm
3001 PVC Pipes 10KG/Sqm 90mm outerdia M
3002 PVC Pipes 10KG/Sqcm 110mm outerdia M
3003 PVC Pipes 10KG/Sqcm 140mm outerdia M
3004 PVC Pipes 10KG/Sqcm 160mm outerdia M
3005 PVC Pipes 10KG/Sqcm 180mm outerdia M
3006 PVC Pipes 10KG/Sqcm 200mm outerdia M
3007 PVC Pipes 10KG/Sqcm 225mm outerdia M
3008 PVC Pipes 10KG/Sqcm 250mm outerdia M
3009 PVC Pipes 10KG/Sqcm 280mm outerdia M
3010 PVC Pipes 10KG/Sqcm 315mm outerdia M
3022 Water less urinal of size 328x319x598mm Each
2203 Galvanised Steel 105 x 50 mm M
2204 Galvanised Steel 20 x 47 mm M
2205 Galvanised Steel 58 x 36 mm M
2206 Galvanised Steel 22 x 20 (FW 66 mm) M
2207 Galvanised "C" Section 12 x 3 M
2208 Float Glass 5 mm Thick Sqm
2212 M.S. Grill Powder Coated 100 mm Pitch Sqm
221 Galvanised "C" Section 18 x 7 (FW 33 mm) M
2209 Galvanised Steel20 x 24 (FW 33 mm) M
2213 Galvanised Steel 90 x 50 mm M
2214 TMT Bars Fe 500 MT
2215 TMT Bars Fe 550 MT
2216 Maranthi Wood cum
2217 Galvanised Steel 70 x 55 mm M
2218 Galvanised Flymesh Section 20 x 40 mm M
2219 Galvanised Steel Section 48 x 25 mm M
2220 Galvanised Steel (Glass Beading ) 12 x 12 mm M
2221 Mesh (SS 304 Grade) Sqm
2222 Galvanised Steel 72 x 55 mm M
2223 Galvanised Steel Section 48 x 50 mm M
2224 Galvanised Steel Section 46 x 52 mm M
2225 Galvanised Steel Section 46 x 46 mm M
2226 Galvanised Beading Section 18 x 25 mm M
2227 Fly ash bricks of size 22.50 x 10 x 7.5 cm 100 No.
2228 White cement based putty kgs
Vitrifed tiles - 10 mm thick double charged, nano technology size
2250 Sqm
800mmx800mm
Vitrifed tiles - 10 mm thick double charged, nano technology size
2251 Sqm
1200mmx600mm
Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x 15
3023 Each
cm
2252 Solid blocks concrete 40 x 15 x 20 cms 100 No.
Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x 10
3024 Each
cm
Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x 20
3025 Each
cm
3027 Polymer modified stucco mortar Kg
2257 Sal wood (Red) cum
2229 Precast Hallow blocks (40x20x20 cm) grade 50 100 Nos.
986 40mm thick average resin bonded rock wool slab having density 36+/-5 kg/Cum Sqm
987 50mm thick average resin bonded rock wool slab having density 36+/-5 kg/Cum Sqm
988 65mm thick average resin bonded rock wool slab having density 36+/-5 kg/Cum Sqm
989 75mm thick average resin bonded rock wool slab having density 36+/-5 kg/Cum Sqm
990 100mm thick average resin bonded rock wool slab having density 36+/-5 kg/Cum Sqm
991 60mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
992 70mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
993 Polyurethane foam (PUF) spray 60mm thick average with PU foam Sqm
994 Polyurethane foam (PUF) spray 70mm thick average with PU foam Sqm
995 50mm thick thermal insulation of roofing with expanded polystyrene Sqm
996 70mm thick thermal insulation of roofing with expanded polystyrene Sqm
997 90mm thick thermal insulation of roofing with expanded polystyrene Sqm
998 110mm thick thermal insulation of roofing with expanded polystyrene Sqm
999 120mm thick thermal insulation of roofing with expanded polystyrene Sqm
Thermal insulation of roofing with expanded polystyrene (50mm thick) with
1000 Sqm
aluminium strips
Thermal insulation of roofing with expanded polystyrene (70mm thick) with
1001 Sqm
aluminium strips
Thermal insulation of roofing with expanded polystyrene (90mm thick) with
1002 Sqm
aluminium strips
Thermal insulation of roofing with expanded polystyrene (110mm thick) with
1003 Sqm
aluminium strips
Thermal insulation of roofing with expanded polystyrene (120mm thick) with
1004 Sqm
aluminium strips
1005 25mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1006 40mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1007 50mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1008 65mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1009 75mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1010 100mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
Basic Rate
177.97
25.42
63.56
152.54
21.19
190.68
199.15
230.00
593.22
593.22
593.22
714.00
600.00
700.00
740.00
1210.00
1160.00
3644.07
3559.32
3644.07
3474.58
3389.83
847.00
1023.00
1029.00
1029.00
1050.00
1200.00
1100.00
1100.00
1050.00
1000.00
1200.00
1054.29
1023.00
1029.00
847.00
1050.00
1100.00
1200.00
1100.00
1091.43
1100.00
1100.00
1000.00
1050.00
7619.05
428.57
1630.00
150.00
1630.00
190.00
190.00
1630.00
4.76
666.67
428.57
1440.68
476.19
571.43
28.50
238.10
18.50
476.19
380.95
666.67
333.33
666.67
127.12
59.32
33.90
38.14
76.27
254.24
169.49
1891.31
194.92
3135.59
211.86
3220.34
44915.25
3220.34
338.98
144.07
165.25
211.86
37147.00
40347.00
37947.00
41147.00
38282.20
39082.20
39022.00
51797.46
50406.78
39082.20
72.03
0.85
14.29
25.42
25506.78
53766.95
8.47
317.80
190.68
105.93
550.85
593.22
567.80
762.71
889.83
1483.05
550.85
389.83
105.93
120.34
529.66
635.59
932.20
932.20
677.97
635.59
868.64
741.53
296.61
490.00
1562.50
490.00
333.33
231.36
275.42
254.24
320.34
424.76
469.52
290.48
200.00
205.08
822.88
551.69
21.90
874.29
740.00
1099.15
50.85
354.29
160.17
406.78
381.36
440.68
1355.93
296.61
67.80
1.69
1.69
1267.80
1623.73
889.83
1889.83
1088.98
1266.95
938.14
190.68
266.95
1355.93
2266.95
1000.00
854.24
1889.83
6.78
5.08
37.50
243.75
4.76
13.33
106.78
233.05
5.93
5.93
457.63
889.83
436.44
409.32
320.34
124.58
249.15
368.64
4110.17
4194.92
4237.29
4406.78
4576.27
3813.00
3898.00
4067.00
4329.00
4480.00
186.44
37.29
37.29
37.29
677.97
16.95
37.29
3728.81
3728.81
33.90
3389.83
37.29
37.29
37.29
33.90
35.59
35.59
33.90
33.90
50.85
37.29
37.29
254.24
52542.37
55.08
42.37
72.03
49.15
203.39
50847.46
5084.75
37288.14
3389.83
32.20
32.20
33898.31
33898.31
33898.31
84.75
84.75
37.29
254.24
254.24
84.75
33.90
37.29
37.29
37.29
37.29
101.69
37.29
37.29
46.61
37.29
37.29
37288.14
37.29
37.29
37.29
37.29
84.75
37.29
37.29
37.29
37.29
152.54
37.29
6779.66
11864.41
0.51
4237.29
50847.46
37288.14
37288.14
37.29
67796.61
67796.61
37.29
42.37
50.85
186.44
37.29
42372.88
3135.59
4237.29
37.29
50.85
50.85
37.29
50.85
50.85
110.17
37.29
37.29
37.29
37.29
84.75
50.85
37.29
254.24
254.24
37.29
37.29
50.85
254.24
220.34
3728.81
37.29
37.29
37.29
37.29
169.49
37.29
12.71
80500.00
12.71
21.19
80500.00
80500.00
80500.00
80500.00
80500.00
80500.00
80500.00
35500.00
35500.00
35500.00
35500.00
35500.00
66500.00
66500.00
66500.00
66500.00
66500.00
8.47
66500.00
66500.00
66500.00
59.32
423.73
381.36
10169.49
42000.00
42000.00
21186.44
146000.00
21.19
55.08
4.24
121000.00
118.64
121000.00
121000.00
121000.00
16.95
42.37
29.66
12711.86
169.49
2.54
37.29
47.46
37.29
35500.00
8.47
211.86
21.19
38983.05
1.69
21.19
550.85
779.66
438.14
169.49
423.73
233.05
275.42
762.71
1949.15
2288.14
1144.07
57.63
59.32
33.90
39.83
1.69
84.75
107.63
44.92
1118.64
347.46
51.69
50.85
855.93
31.36
32.20
550.85
38.14
39.83
22.03
27.97
32.20
11.02
55.08
52.54
45.76
43.22
44.07
2.54
114.41
16.95
101.69
466.10
3.39
32.20
14.41
33.90
62.71
71.19
75423.73
101.69
275.42
199.15
84.75
3.39
14.41
11.02
27.97
760.17
173.13
84.75
118.64
97.46
171.19
67.80
55.93
207.63
156.78
152.54
182.20
110.17
33.90
127.12
194.92
84.75
84.75
84.75
139.83
423.73
142.86
169.49
72.03
237.29
111.86
63.56
289.83
93.22
18.64
228.81
50.85
203.39
65.25
59.32
148.31
186.44
68.57
114.29
114.29
88.98
177.97
186.44
177.97
186.44
105.93
289.83
576.27
186.44
25.42
286.44
32.81
105.93
22.86
38.14
169.49
58.59
122.88
296.61
241.53
127.12
152.54
1165.25
957.63
254.24
283.90
296.61
131.36
720.34
1076.27
101.69
127.12
177.97
203.39
254.24
279.66
423.73
542.37
93.22
313.56
12.71
161.02
161.02
127.12
106.78
118.64
135.59
152.54
203.39
38.14
55.08
101.69
127.12
152.54
330.51
254.24
271.19
711.86
330.51
686.44
203.39
288.14
491.53
533.90
741.53
300.85
466.10
635.59
296.61
813.56
711.86
813.56
584.75
432.20
533.90
788.14
491.53
406.78
813.56
813.56
305.08
677.97
440.68
508.47
508.47
694.92
389.83
508.47
711.86
440.68
360.17
347.46
288.14
576.27
610.17
398.31
508.47
500.00
394.07
440.68
37.29
53.39
88.98
124.58
133.90
142.37
152.54
156.78
165.25
194.92
105.93
152.54
152.54
110.17
466.10
37.29
42.37
728.81
106.78
6449.15
4135.59
978.81
1822.03
2313.56
2533.90
711.86
978.81
1512.71
1868.64
2444.92
4224.58
5025.42
8097.46
266.95
355.93
220.34
23.73
523.73
50.85
720.34
148.31
135.59
186.44
254.24
254.24
296.61
245.76
254.24
271.19
389.83
101.69
142.37
169.49
498.31
550.85
186.44
142.37
160.17
160.17
169.49
2118.64
110.17
932.20
110.17
194.92
415.25
4.24
409.32
462.71
161.02
161.02
118.64
466.10
211.86
1949.15
1779.66
466.10
373.73
593.22
593.22
762.71
720.34
1076.27
1016.95
1398.31
1271.19
1737.29
1559.32
978.81
320.34
466.10
21.19
211.86
262.71
355.93
1271.19
1737.29
1559.32
978.81
320.34
466.10
21.19
211.86
262.71
355.93
677.97
576.27
38.14
38.14
46.61
55.08
444.92
533.90
110.17
661.02
5.08
932.20
4004.24
5932.20
10254.24
1144.07
1457.63
779.66
1016.95
1601.69
682.20
889.83
610.17
1694.92
508.47
677.97
779.66
847.46
847.46
525.42
254.24
720.34
398.31
72.03
25.42
38.14
9152.54
12.71
38.14
12.71
29.66
25.42
21.19
25.42
29.66
55.08
249.15
186.44
409.32
152.54
279.66
15.25
254.24
169.49
447.62
15.25
476.19
47.62
3800.00
423.73
190.48
72.03
25.00
42.37
333.33
42.37
169.49
4067.80
148.31
333.33
42.37
169.49
135.59
0.85
0.85
194.92
40.00
135.59
9.00
67.80
1.69
10.17
93.22
25.42
33.90
762.71
5.36
21.19
271.19
186.44
29.66
338.98
364.41
38983.05
0.42
8.47
12.71
6.78
0.85
762.71
5.93
3.00
2.00
2.00
10.00
900.00
125.00
2.86
38.14
6.78
338.98
20.00
338.98
446.43
23.81
4.76
16.95
200.00
33.90
66.96
211.86
17.86
254.24
5.08
25.42
67.80
46.61
220.34
29.66
47.62
63.56
3559.32
42.37
10169.49
11186.44
10169.49
4745.76
5805.08
40.00
170.00
140.00
13.33
30.00
16.95
33.90
1144.07
10.17
127.12
338.98
169.49
483.05
1762.71
3.39
5.93
152.54
127.12
194.92
59.32
55.08
8533.90
68220.34
237.29
177.97
250.00
254.24
7.63
33.05
97.46
4.24
10.17
50.85
55.08
55.08
55.08
0.42
3.39
1.69
7203.39
67.80
67.80
21.19
38.10
52.38
76.27
28.57
95.24
101.69
1355.93
323.81
447.62
4.76
237.29
29.66
152.54
46.61
703.39
25.42
67.80
1016.95
5.08
101.69
9.32
27118.64
415.25
457.63
661.86
916.10
127.12
254.24
169.49
59.32
80.95
262.71
2.54
25.42
432.20
296.61
432.20
728.81
932.20
1186.44
1440.68
1779.66
2203.39
2796.61
3559.32
18644.07
177.97
88.98
135.59
38.14
16.95
398.31
593.22
18.64
39.83
169.49
44000.00
44500.00
30677.97
163.56
110.17
148.31
0.85
317.80
165.25
152.54
148.31
139.83
52.54
508.47
22.03
847.46
1694.92
84.75
2966.10
50.85
101.69
19.49
42000.00
4237.29
4100.00
1101.69
1610.17
2542.37
1610.17
4.24
3.39
25.42
80.51
29.66
29.66
1525.42
1822.03
4.00
1.50
5.08
4.24
8.47
139.83
4.00
252.54
20.59
1144.07
1186.44
296.61
5508.47
847.46
635.59
1610.17
169.49
974.58
37.29
25.42
35.59
32.80
25.42
8.47
4.24
2.54
21.19
338.98
559.32
796.61
1028.81
254.24
735.59
580.51
725.42
241.53
466.10
720.34
974.58
108.47
211.86
300.85
54.24
76.27
89.83
113.56
128.81
168.64
610.17
703.39
1261.86
1577.12
122.88
182.20
242.37
302.54
332.20
150.85
227.12
281.36
358.47
398.31
54.24
76.27
89.83
113.56
128.81
168.64