Soils Testing Equipment For Geotechnical Field - Lab Testing - Gilson Co.

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

Soil Testing Equipment

Home « Soils

Gilson offers a complete collection of soil testing equipment to perform ASTM and AASHTO
geotechnical test methods. Geotechnical tests provide valuable information on the properties of
soil mechanics that affect the strength and the stability of pavements, embankments, and other
structures. Laboratory and field materials testing of soils is an important part of civil engineering
design.

Read More...

Proctor Compaction & Density California Bearing Ratio (CBR)

Consolidation Atterberg Limits


Triaxial Shear Strength Soil Sampling

Unconfined Compressive Strength Permeability


Direct Shear Strength Field Testing / Classification

Hydrometer Analysis of Soils Specific Gravity


Soil-Cement Load Frames

Load & Displacement Measurement Latex Membranes

Porous Stones Data Acquisition Software


Specimen Measurement

Gilson Soils Testing Equipment


Geotechnical testing equipment is used to determine grain size, moisture content, and strengths at
varying moisture contents. Other tests are run to measure the permeability of water or fluids in
soils or to provide controls for compaction of engineered fills.

Proctor Compaction & Density equipment is used to determine the optimum moisture and
density of soil. Compaction equipment and molds form samples to measure the compacted
density and unit weights of soils. Test results are used to control placement and compaction
of soil embankments and engineered fills. Products are also available for testing relative
density.

California Bearing Ratio (CBR) equipment for use in the laboratory or field is available. CBR lab
testing determines moisture content and strength of laboratory samples. Field tests measure
the strength of soils in place. Products are also available for the Florida Limerock Bearing
Ratio (LBR) laboratory test. Gilson’s selection of CBR test equipment and products meet
ASTM and AASHTO standards.

Consolidation equipment tests for soil swell and expansion to predict the potential for settling
under load. Gilson offers a selection of load frames, consolidometers, and other products that
comply with ASTM and AASHTO test standards.

Atterberg Limits products determine when cohesive soils move from solid to plastic and liquid
phases. Liquid limit, plastic limit, and shrinkage limit tests establish the plasticity index, an
important value in foundation design. Products conform to ASTM and AASHTO test
standards.

Triaxial Shear Strength equipment tests the strength of soil with confining pressures. Gilson
provides a complete selection of triaxial testing cells, control panels, load frames, and
accessories.

Soil Sampling products are used to profile soil layers and collect field samples for testing and
classification. Our augers and soil samplers feature models ideal for use in soil, clay, sand,
and mud. Augers are constructed of carbon or stainless steel, and available in 3in or 4in sizes.

Unconfined Compressive Strength equipment determines the compressive strength of cohesive


soils in accordance with ASTM and AASHTO standards. Test equipment includes Load
Frames, as well as products used for sample preparation, measuring load and displacement,
and more.

Permeability testing, or hydraulic conductivity, identifies flow characteristics of water and other
fluids in soils. This equipment meets ASTM and AASHTO standards for a number of flexible-
wall, constant-head, or falling-head permeability test methods.

Direct/Residual Shear Strength test equipment includes pneumatic direct shear, dead-weight
direct shear, and direct/residual shear testing machines. These machines measure the
resistance of soils to direct and residual shear forces. A selection of weight sets, shear boxes,
and other accessories are available for testing to size, weight, test method, and standards.

Field Testing/Classification equipment provides visual and manual estimates of soil qualities
such as moisture content, strength, density, and grain size. Soil properties indicate if the soil
will be stable and perform well understructure and load. Moisture testers, dial and pocket
penetrometers, shear vane sets, classification charts, meters, and more are used for accurate
descriptions.

Hydrometer Analysis of Soils measures the particle size distribution of silt and clay in the soil in
accordance with ASTM D7928 and AASHTO T 88 test standards. Gilson offers soil
hydrometers, sedimentation cylinders, and sample preparation equipment.

Soil Cement test equipment measures the compressive strength of soil and cement mixtures.
Soil cement is often used as a base in pavements for its strength. Test sets and components
are designed for use with Load Frames and meet ASTM and AASHTO test standards.

Load Frames manufactured by Karol-Warner are available with different strain rates. They can
be equipped for many laboratory soil tests with a range of digital and analog sets. Load
Frames are used in basic soil tests such as CBR, soil cement, shear strength, unconfined
compression, and more.

Load & Displacement Measurement instruments are mounted on load frames to measure force
and deformation during testing. Grouped sets or individual components are offered. Select
from analog sets, digital readouts, load cells or load rings, and more.

Latex Membranes provide a waterproof barrier to prevent fluids from leaking into permeability
or triaxial soil specimens during testing. Available in sizes from 1.4 to 6.0in (36 to 152mm).

Porous Stones allow water drainage and support both ends of a soil specimen during shear
strength, consolidation, permeability, and triaxial testing. Sizes range from 1.4 to 6.0in (36 to
152mm).

Data Acquisition Software displays stress and strain values, computes data, and generates test
reports for many soil and asphalt laboratory applications. Programs are available for
California bearing ratio/limerock bearing ratio, triaxial shear, unconfined compressive
strength, soil cement, consolidation, direct/residual shear testing, and Marshall stability tests.
Software is optimized for use with two and four-channel digital readout systems. Each data
acquisition module is available for a 30-day free trial.

Specimen Measurement tools provide precise measurements of soil samples. Products include
a Diameter Measuring Tape in inches or millimeters, and 6 or 12in (152 or 305mm) Digital
Calipers.

SHOP OUR PRODUCTS

Need Assistance? Your details are safe!


800-444-1508 100% secure payment

Enter your email here...


INFORMATION MY GILSON

About Us Customer Information

Careers Addresses

Contact Us Orders

Newsletter Invoices

Testimonials Favorites List

Case Studies Shopping Cart

Distributor Information Quick Order

Privacy Policy

Terms & Conditions

Sitemap

PRODUCTS CONTACT US

Online Catalog 7975 North Central Drive


Lewis Center, OH 43035
Request Catalog
1-800-444-1508
Price List
US Sales
New Products List
International Sales
Clearance List
Quotes
Recently Viewed Products
Technical Support
Resource Center
Human Resources

Live Chat

Copyright © 2021 GlobalGilson.com. All rights reserved.

You might also like