Professional Documents
Culture Documents
E Catalog General 4
E Catalog General 4
GENERAL CATALOG
Vol.4
www.kaise.com
Contents
Battery Checkers SK-8550 3
AutomotiveTesters
SK-8535 4
Oscilloscope SK-2500 5
Handy mΩTester SK-3800 7
Low Current DC Clamp Meter SK-7830 8
AC / DC Digital Clamp Meters SK-7661 9
SK-7682 9
SK-7718 10
SK-7720 / 7722 11
Automotive Digital Multimeters KT-2021 12
SK-6166 13
Digital Multimeters (ProbeTester) SK-6597 13
SK-6592 14
Digital InsulationTester SK-3502 14
Digital Tachometer SK-8401 15
O2 Sensor Checker SK-8402 15
AC / DC Digital Clamp Meters SK-7660 19
Clamp Meters
SK-7661 19
SK-7682 19
SK-7718 20
SK-7719 20
SK-7720 20
SK-7722 20
SK-7708 21
AC Digital Clamp Meters SK-7601 21
SK-7602 22
SK-7603 22
SK-7615 22
SK-7625 23
AC Leakage Clamp Meters SK-7820 23
SK-7825 23
Analog Insulation Testers SK-3002 24
Insulation Testers
SK-3003 24
SK-3005 24
Digital Insulation Testers SK-3500 25
SK-3502 25
Handy-Type KU-2600 29
Digital Multimeters
KU-2602 29
SK-6161 30
SK-6163 30
SK-6150 30
Probe Tester SK-6597 31
SK-6592 31
Bench-Top DMM SK-4033 32
SK-4035 32
All-in-one DMM SK-6555 32
Card-Type DMM KU-1199 33
SK-6500 33
Analog Multitesters KF-32 34
Analog Multitesters
KF-20 34
Triaxial ELF Magnetic Field Meter SK-8301 34
OtherTesters
Digital Sound Level Meter KG-70 35
Digital Light Meter KG-75 35
100-41 / 100-62 / 100-63
Accessories 100-57 / 100-72 / 100-74
36
For Safety
Higher-numbered categories correspond to electrical environments with greater momentary energy, so a measurement product designed for CAT Ⅲ environments can endure
greater momentary energy than one designed for CATⅡ. Using a measurement product in an environment designated with a higher-numbered category than that for which the
product is rated rated could result in a severe accident, and must be carefully avoided.
Never use a CATⅡmeasuring product in CATⅢ, or Ⅳ environments.
The measurement categories comply with the Overvoltage Categories of the IEC 60664 Standards.
Kaise conforms to IEC 61010-031 (safety standard for hand-held probes) No Cap attached Cap attached
by using test lead caps.
Insulation Cap Required standards : Exposed metal part must be 4mm or shorter for
for Test Lead CAT IV and III environments to prevent short-circuits
from occurring. For CATⅡenvironment For CAT Ⅲand Ⅳenvironments
CE Mark
CE marking is a safety mark which can be attached only on a product meeting the safety requirements of the Directive of Council of the European Union (EC
Directive).
A product attached with the CE mark is designed so as to meet the requirements of the "Low Voltage Directive" and "EMC Directive" of the EC Directive. Low
Voltage Directive: This Directive covers products of power supply voltage of 50V-1000V(AC) and 75V-1500V(DC), and it defines electric safety requirements
against shocks, burns, etc. The applicable standard is EN61010 corresponding to IEC1010 give on the left. EMC Directive: This Directive stipulates conditions
so as not to give out strong electromagnetic waves from equipment to the outer environment and to protect equipment from the effect of electromagnetic waves
from the outside.
Traceability Chart
Traceability to prove the compliance with national and international standards is an essential factor for measuring instruments used as test instruments associated with quality
assurance. Products of Kaise are calibrated by reference samples which is periodically checked for its compliance with national standards. A calibration certificate and test data
report are available on your request.
National Institute of Advanced Japan Electric Meters Inspection National Institute of Information National Institute of Standards
National Standards AIST JEMIC NICT NIST
Industrial Science and Technology Corporation and Communications Technology and Technology
Comparative Standards
Calibration Standards High-Accuracy Digital Multimeter LCR Meter Digital thermohygrometer Current Shunt
Applied Standards AC/DC Voltage Resistance Frequency Capacitance Temperature Humidity AC / DC Current
Calibrated Parameters Measuring Instruments in R&D, Production, Inspection and Service Department
2
Battery Checkers
New and Improved Battery Checker with Advanced Functions
Automotive Testers
12V
Battery Test
12V & 24V Start Performance,
Charging System Test
SK-8550
FEATURES
● Can record frequently tested batteries as favorites list.
● Editable header / footer function that can print favorite names or pictures (shop name,
SPECIFICATIONS
Display : LCD (dot matrix display :128×64 dots)
Clamp Meters
CE Mark : EN61326-1
Dimensions : 248(H) x 96(W) x 55(D) mm
Weight : Approx. 670g
Accessories : 800 Battery cable (attached), 934 USB Cable,
Printer Paper (x 2, for testing sample, 1 roll is attached in the unit),
1032 Carrying Case
OPTIONAL ACCESSORIES
851 Printer Paper
800 Battery cable
How to Test
Digital Multimeters
FA
VO
RIT
ES
PR
INT
B
Analog Multitesters
C AT T
H
EC E R
Terminal
S K Y
K ER
-8
55
0
MAX
32
V
Terminal
Advantages of SK-8550
Temperature 24℃
Testing Mode
Charge controller / Idle Reduction 03/572-20(ATLAS) one screwdriver.
3
Battery Checkers
Quick and Accurate Car Battery & System Test with Single Hand-Held Equipment
Automotive Testers
12V
Battery Test
12V & 24V Start Performance,
Charging System Test
SK-8535
FEATURES
● For the automotive batteries with EN/DIN, SAE/BCI, and JIS standards.
Clamp Meters
SPECIFICATIONS
Display : LCD (dot matrix display :128×64 dots)
Language (display & print) : Japanese, English, Chinese (Default setting : Japanese)
Printer : Bult-in Printer
Power Supply : from Test Battery or USB connection
Testable Battery : 12V Battery
※24V battery : engine startability test and charging system test
are available.
OPTIONAL ACCESSORIES
851 Printer Paper
Digital Multimeters
Printer Paper ※Option (10 rolls per set)
Please Purchase this printer paper for replacement.
Advantages of SK-8535
Analog Multitesters
What tests available?
necessity of battery replacement to prevent the
①Battery Test
unexpected battery-down. Battery Test
・Battery Charging Level (SOC) ※SOC:State of Charge
・Battery Condition (SOH) ※SOH:State of Health LED lights up or flash Battery Test Report
②Battery System Test by test results Date and Time
・Engine Start Performance (Starting ability of the battery) GOOD CHARGE BAD 2016/03/15 15:00 Testing date and time
・Charging System (Generating condition of alternator) Good light
(Aging Test Mode) Battery test mode
light
Test Result : Good Battery test result
Good/Charge
Applicable to the vehicles with Charge light
Battery Type
Model No.
JIS
Q-85
Controller or Idle Reduction systems Attention flash Measured CCA 615CCA
Condition of
Battery Voltage 12.780V
Charge/Retest light tested battery
Accurate testing with the specific test program and Temperature 24℃
Replace light Testing Mode
standard numbers which are designed for their testing Charge controller / Idle Reduction
purpose. Battery charging level
SOC (State of Charge) : 100%
(SOC)
Unused Battery Test Mode
Other Testers
Built-in Printer Special mode for testing unused (new) batteries which are SOH (State of Health) : 100% Battery aging level
Quick-and-easy printing stocked in car dealers or garages. This is effective to (SOH)
of the test results from keep them in good condition preventing unexpected
battery aging during storage. Periodical test is Comment for
built-in printe. recommended. test result
S55D23 / S65D26 which are used for TOYOTA-Hybrid Test Result : Good test result
Display & Print Language Selectable vehicles such as Prius, or Prius C. Cranking 8.619V
Start Performance 100% Battery conditions at
English / Chinese / Japanese are available. engine starting
CHARGING SYSTEM TEST
Easy Database Upgrade through
Test Result : Good Charging system test result
KAISE Website Charging Voltage 14.523V
Battery conditions
Test Result Saving & PC Connection ※PC and internet connection are required.
Ripple Voltage 0.110V
4
Oscilloscope
2ch Hand-held Oscilloscope Especially for Car Mechanics
Automotive Testers
Graph mode
SK-2500
V
SPECIFICATIONS
DMM mode Display : Dot matrix LCD (240×128 dots), Display Size : 53mm(H)× 92mm(W)
AC/DC DUTY
V Ω
Frequency bandwidth : DC to 200kHz
Hz % PULSE
WIDTH
DATA
MEMO
DISP
HOLD APO
Max. Sampling Rate : 2MS / sec.
Number of Channels : 2 channels
Acquisition Memory : 4096 points
Oscilloscope Function : Graphic waveform display for voltage measurement
Internal Power Supply : 1.5V LR6 or R6P batteries 4 pcs.
(NiMH rechargeable battery usable)
External Power Supply : USB mini-B connector (DC5V)
Clamp Meters
200mV / 2V / 20V
500mV / 5V / 50V / 200V ±2dot 1000Vp-p
1V / 10V / 100V / 500V ±1dot
DMM mode
DC Voltage Range Accuracy Resolution Max. Input
200.0mV 100μV
2.000V 1mV
±1.0%rdg±8dgt
20.00V 10mV 1000V DC
200.0V 100mV
1000V ±1.0%rdg±5dgt 1V
AC Voltage Range Accuracy Resolution Max. Input
(AC V rms) ±2.0%rdg±8dgt(45Hz∼1kHz)
2.000V 1mV
±2.5%rdg±8dgt(1kHz∼10kHz)
±4.0%rdg±8dgt(10kHz∼20kHz)
20.00V 10mV
OPTIONAL ACCESSORIES ±6.0%rdg±8dgt(20kHz∼30kHz)
600V AC
±2.0%rdg±8dgt(45Hz∼1kHz)
660 AC/DC Clamp Adapter 650 RPM Sensor (for High Tension Cord) (rms)
200.0V ±2.5%rdg±8dgt(1kHz∼10kHz) 100mV
Digital Multimeters
Advantages of SK-2500
Car Maintenance List - The Auto Set Rubber Holster for Shock Protection Easy-to-Use Hand-Held Oscilloscope
Function for Car Sensors and Signals and Improved Ruggedness Without Special Accessories
Analog Multitesters
The most complicated thing to get the observable Standard oscilloscopes tend to be slippery due to its SK-2500 can use as your daily tool, with oscilloscope,
waveform with oscilloscope is the settings of voltage plastic chassis, and careful handling is required. digital multimeter, and data logger in one single
axis, time axis, and trigger. SK-2500 added rugged solution for hand-held hand-held unit. Test probes and accessories are
SK-2500 makes it easier by providing Car Maintenance oscilloscope with slip-proof rubber holster. This also common with our other test & measurement products
List . Just choosing the sensor or signal to be measured, offers stable placing even in the engine compartment. for enhanced usability.
the instrument automatically adjusts the waveform and Usable : 100-41 Test Lead Kit, 100-62 Test Lead Set
shows it on the screen.
Large-Sized Luminous Key Switches
with Simple Operation
Feeling difficulties in complicated key operation for
using oscilloscope?
Key switches of SK-2500 offers intuitive operation with
illumination function, pictorial indications, and guide
Other Testers
5
Oscilloscope
Measurement Example
Automotive Testers
Waveform observation of cam and crank sensors in graph mode
※See maintenance manual when making the measurement.
①Insert the Input Plugs of Test Lead to Input ③Choose the item from Car Maintenance List. ④Adjust voltage axis and waveform position to
Terminals. Turn on the instrument. Auto set works for voltage / time axes, make space for CH2 waveform.
②Contact the Test Pins to the terminal to be trigger, and waveform position to display ⑤Press CH2 Key. Crankshaft position sensor
measured. The below picture is getting the camshaft position sensor waveform in CH1. waveform is displayed on the screen. Adjust
signal input from wire harness connector the voltage axis to be the same as CH1 and
using 100-41 Test Lead Kit. adjust the waveform position.
Clamp Meters
Insulation Testers / Earth Tester
Battery voltage measurement in DMM mode
①Insert the Input Plugs of Test Lead to Input ④Read the measurement result on the screen.
Terminals. Turn on the instrument. ⑤Start the engine to let the alternator power
②Press TEST MODE Key to go to DC Voltage generated. Check the measurement value on
measurement in DMM mode. the LCD that should be increasing.
③Contact the test pins to battery terminals (red Measuring this voltage is effective to check
pin to plus terminal, and black pin to minus the generating condition of the alternator.
terminal). ※For charge control vehicles, alternator might
not generate the power.
Digital Multimeters
2ch test for battery voltage and alternator current
※Optional 660 AC/DC Clamp Adapter is required.
①Insert test lead plug to CH1 input terminal, ④Select 40A range with the clamp adapter. Graph mode
and insert clamp adaptor plug to CH2 input ⑤Clamp-on the B-terminal of the alternator.
terminal.
②Turn on the instrument (SK-2500).
Analog Multitesters
※For DMM mode, enter DC voltage
measurement mode by pressing Test Mode
key.
③Contact test pins to the battery terminals.
Red to plus, black to minus.
※940 alligator clip is used in the picture below.
DMM mode
Optional Accessories
100-72 100-74
Accessories
6
Handy mΩ Tester
Low resistance measurement for the motors. Ideal for the maintenance of Hybrid and Electric vehicles.
Automotive Testers
LOW
Ω Ω
DISP Simple Simple
COMP HOLD Dust Proof Water Resistant
SK-3800
FEATURES
● Autonotive mΩ Tester focusing on the testing of Hybrid and Electric vehicles.
SPECIFICATIONS
Clamp Meters
Advantages of SK-3800
Color-coded input terminals and test plugs Accurate testing with Clip-on test lead tips
Digital Multimeters
Easy plug-in to the input terminals by colors. Also helpful in 4-terminal measurement Hands-free measurement without holding the test leads.
preventing the wrong insertion. Effective for eliminating the impedance contribution of the
wiring and contact resistances to ensure the accurate Large backlit LCD
measurement.
Comparator Function
High/Low judgement by LCD display and buzzer comparing
with the preset reference value.
Analog Multitesters
Low resistance measurement of Measurement Example (with TOYOTA Prius) ⑥Connect the test leads to the three-phase alternating
the hybrid vehicle motor ※Observe the procedures in maintenance manual. current cable terminals of the hybrid vehicle motor.
7
Low Current DC Clamp Meter
Automotive Testers
DC DC AUTO DISP
Conductor 4000mA 40A/200A DIFF ZERO HOLD APO
Diameter
φ20mm SK-7830
FEATURES SPECIFICATIONS
● Automatic Zero-Adjustment function to adjust LCD
Display : 4000 count LCD, Maximum reading 4050
indications into 0±1 digit when powered on. Sampling Rate : 64 times / sec (Display : 1 time / sec)
● Stable LCD reading even in low current.
Range Selection : Manual (4000mA), Auto (40A / 200A)
● Shielded clamp core prevents external noise or effect
Conductor Diameter : φ20mm Max.
of external magnetic field. Power Supply : 1.5V R6P or AA Batteries (x 2)
CE Mark : CATⅢ300V and EMC
Range Accuracy
Clamp Meters
4000mA from 5mA Dimensions : 203(H) x 61(W) x 30(D) mm
DC ±1.5%rdg±5dgt
Current 40A 0A to 100A Weight : 230g
200A 101A to 200A ±3.0%rdg±5dgt
Functions Difference, Power-on Initialize, Display Hold, Auto Power OFF
Accessories : 1011 Carrying Case (x 1)
1.5V R6P Batteries (x 2)
Advantages of SK-7830
Digital Multimeters
φ20mm Max
Dark Current : mA-level low current that is used after turning off the engine by such as car security ③Clamp-on a minus cable of car battery.
Analog Multitesters
system or audio settings back-up. Too much dark current causes battery runs out, but its
measurement was difficult. SK-7830 solved this problem and make it quick and easy.
Car Alternator : Engine generator that outputs DC electricity. Measuring its charging current is
effective to find the trouble that might cause battery runs out or battery damages.
①Set the switch to 40A/200A range without ②Clamp B-terminal cable from car alternator.
touching the trigger lever, not to open the ③Start the engine.
clamp jaws. ④Read the measurement value on LCD.
※Alternator is judged normal if LCD shows 20A
Accessories
8
AC / DC Digital Clamp Meters
Handy-size Clamps with Efficient Functions
Automotive Testers
AC/DC AC/DC
V Ω Hz
DUTY MAX AUTO DISP
400A DIFF APO
Conductor % MIN ZERO HOLD
Diameter for DC Current
measurement
φ27mm
SPECIFICATIONS OPTIONAL ACCESSORIES
Display : 4000 count LCD, 940 Alligator Clips 944 Test Pin
Maximum reading 4050 948 Alligator Clips 946 Battery Clip
Sampling Rate : 3 times / sec 793 Coil-Type Contact Pin
Range Selection : Auto Ranging
Range Accuracy
Conductor Diameter : φ27mm Max. 40A ±1.5%rdg±3dgt
Power Supply : 1.5V R03 or AAA Batteries (x 2) DC 40 to 200A ±1.5%rdg±5dgt
Current 400A 201 to 300A ±3.0%rdg±3dgt
Clamp Meters
Hz / % AC 40V
charging current Voltage 400V
±1.5%rdg±5dgt (40 to 400Hz)
Focused on High-Flexibility
AC/DC AC/DC DUTY
V Hz %
for Voltage Range Accuracy
Conductor
400A measurement
DC
40A ±1.5%rdg±3dgt
Diameter Current 40 to 200A ±2.0%rdg±3dgt
PEAK MAX AUTO DISP TRUE 400A
DIFF APO RMS 201 to 400A ±4.0%rdg±3dgt
Analog Multitesters
99.9%
Sampling Rate : 3 times / sec MAX / MIN, Peak Hold, Difference,
Range Selection : Auto Ranging Functions Power-on Initialize (for DC Current measurement),
Display Hold, Auto Power Off
Conductor Diameter : φ19mm Max.
Power Supply : 1.5V R6P or AA Batteries (x 2)
CE Mark : CATⅢ 300V and EMC Car Measurement with SK-7682
Dimensions : 196(H) x 59(W) x 30(D) mm Easy-to-grip handheld
Weight : 180g clamp
Accessories : 100-57 Test Leads (x 1 set) Easy-to-grip size with 196mm
940 Alligator Clips (x 1 set) length and 180g weight. Can be
used like an industrial tool.
1011 Carrying Case (x 1)
1.5V R6P Batteries (x 2)
Accessories
OPTIONAL ACCESSORIES
Easy clamping even for
100-41 Test Lead Kit narrow conductors
100-62 Test Lead Set Easy-to-clamp compact clamp
948 Alligator Clips jaws at φ19mm even for narrow
793 Coil-Type Contact Pin conductors in car engine room.
944 Test Pin
946 Battery Clip φ19mm Max
9
AC / DC Digital Clamp Meters
Automotive Testers
AC/DC AC/DC
V Ω Hz
DUTY
1000A %
PEAK MAX AUTO DISP TRUE Dust Simple Water
HOLD MIN DIFF ZERO HOLD APO RMS Proof Resistant
for DC Current
measurement
SK-7718
FEATURES Range Accuracy
● AC / DC 1000A Measurements 400A ±1.5%rdg±5dgt
Conductor AC
Diameter 400 to 600A ±1.5%rdg±5dgt
● "Power-On Initialize" (auto zero adjustment) for DCA. Current 1000A
601 to 1000A ±3.0%rdg±5dgt
φ35mm A/A 400A ±1.5%rdg±3dgt
● MAX / MIN, Difference, Peak Hold
Hz DC 400 to 600A ±1.5%rdg±3dgt
● Dust-proof case is used to protect the tester Current 1000A
Clamp Meters
601 to 1000A ±3.0%rdg±3dgt
from dust damage. Frequency 1Hz to 1kHz ±0.2%rdg±2dgt
4V
SPECIFICATIONS AC 40V
Voltage ±1.0%rdg±5dgt (40Hz to 400Hz)
400V
Display : 4000 count LCD, 600V
Maximum reading 9999 400mV
V/V 4V
Sampling Rate : 3 times / sec Hz・%
DC
40V ±1.0%rdg±3dgt
Voltage
Range Selection : Auto Ranging 400V
600V
Conductor Diameter : φ35mm Max.
1Hz to
Power Supply : 9V 6F22 Battery (x 1) Frequency ±0.2%rdg±2dgt
Digital Multimeters
Starter current measurement
①Set the selector switch to ③Clamp-on the minus cable of the car battery.
DC-A range. ④Start the car engine.
⑤Read the measurement value on LCD.
Analog Multitesters
②Press and hold Peak key to
enter Peak Hold mode.
Other Testers
Advantages of SK-7718
Suitable for the various electric components tests Auto Power Off
Alternator Charging
Battery Voltage Measurement Starter Current Measurement Current Measurement The unit turns off automatically after 12 minutes of last
operation. Effective to conserve the battery life (cancelable).
Difference
Display the relative value during the measurement.
Display Hold
Can freeze the readings on LCD. Useful for reading the
Accessories
10
AC / DC Digital Clamp Meters
2 Channel Measurements on Dual Display LCD and Oscilloscope Connection
Automotive Testers
AC/DC
1000A
AC/DC
V Ω Hz %
DUTY
SK-7720 /SK-7722
PULSE PEAK MAX DISP FEATURES SPECIFICATIONS
WIDTH HOLD MIN DIFF HOLD ● Two different elements can be measured at once and
Display : 4000 count LCD, Maximum reading 9999
OUT TRUE Dust Simple Water read on a bigger Dual Display LCD. Sampling Rate : 15 times / sec. (each channel),
PUT RMS Proof Resistant ● Analog Output Terminal for an Oscilloscope or Recorder (SK-7722).
3.75 times / sec. for A+V measurements
SK-7722
● Dust-proof case is used to protect the tester from dust damage.
in ordinary mode.
Range Selection : Auto Ranging
OPTIONAL ACCESSORIES
Conductor Diameter : φ36mm Max.
818-02 Temperature Probe 100-62 Test Lead Set
Conductor Power Supply : 9V 6F22 or NEDA 1604 Battery (x 1)
Diameter 817-03 to 817-25 Temperature Probes 940 Alligator Clips
Dimensions : 200(H) x 64(W) x 33(D) mm
922 DC Adapter Cable (SK-7722) 948 Alligator Clips
φ36mm
Clamp Meters
Weight : 310g
930 Output Cord for Recorder 793 Coil-Type Contact Pin
(SK-7722) Accessories : 100-57 Test Leads (x 1 set)
944 Test Pin
100-41 Test Lead Kit 1007 Carrying Case (x 1), 9V 6F22 Battery (x 1)
946 Battery Clip
SK-7720 SK-7722
Range Accuracy
400.0A ±1.5%rdg±3dgt
DC 400A / 1000A 400 to 600A ±1.5%rdg±1dgt
Current 601 to 1000A ±3.0%rdg±3dgt
A +V Range Accuracy Range Accuracy
DC 400V ±1.0%rdg±3dgt 40V ±1.0%rdg±3dgt
Insulation Testers / Earth Tester
SK-7722
※For charge control vehicles, alternator might not generate the power.
11
Automotive Digital Multimeters
Extremely versatile Automotive Digital Multimeter
Automotive Testers
AC/DC AC/DC
A Ω Hz
DUTY Error input
RPM PULSE DWELL BAR RNG DISP
APO
V % WIDTH ANGLE GRAPH HOLD HOLD warning
KT-2021
FEATURES SPECIFICATIONS
● For various automotive measurements.
Display : 6000 count LCD
Battery voltage / RPM* / Injection pulse width / Sampling Rate : (Numerical) 5 times / sec
Charging current for alternator (with optional clamp adapter) / (Bargraph) 40 times / sec
Temperature Range Selection : Auto / Manual Ranging
*Except for rotary engine, diesel engine, and vehicle equipped
Power Supply : 1.5V R03 or AAA Batteries (x 2)
with MSD or MDI systems.
Fuse : F20 (0.63A/500V) x 1
● Large LCD with backlight and bar graph.
Clamp Meters
F32 (6.3A/500V) x 1
● Display hold, Auto power off functions.
CE Mark : V : CATⅡ 1000V, uA/mA/A : CATⅡ 450V
● Error input warning.
and EMC
● Equipped with holster and hard carrying case.
Dimensions : 161(H) x 80(W) x 50(D) mm
OPTIONAL ACCESSORIES Weight : 340g
660 AC / DC Clamp Adapter Accessories : Holster, 100-66 Test Leads (x 1 set)
817-03 to 817-25 Temperature Probes 653 RPM Sensor (for Direct Ignition)
100-41 Test Lead Kit 654 RPM Sensor (for High Tension Code)
100-62 Test Lead Set 818-02 Temperature Probe
Range Resolution Accuracy Input Impedance Function Range Accuracy Input Sensitivity
60mV 0.01mV ±0.4%rdg±3dgt 6V 10Hz to 10kHz 0.5V rms
600mV 0.1mV ±0.3%rdg±3dgt 60V 5V rms
Frequency 10Hz to 50kHz ±0.1%rdg±3dgt
DC 6V 1mV ≒10MΩ, 600V 50V rms
Voltage 60V 10mV ±0.4%rdg±3dgt 50pF 1000V 45Hz to 1kHz 500V rms
600V 100mV Function Range Accuracy
1000V 1V ±0.7%rdg±3dgt RPM4 240 to 20000RPM
60mV 0.01mV ±2.0%rdg±5dgt IP-RPM RPM2 120 to 10000RPM ±0.2%rdg±20dgt
600mV 0.1mV (50Hz to 500Hz) RPM2-M 60 to 5000RPM
60 to 20000RPM
Digital Multimeters
6V 1mV RPM4
AC ±2.0%rdg±5dgt ≒10MΩ,
Voltage 60V 10mV IG-RPM RPM2 30 to 10000RPM ±0.2%rdg±20dgt
(50Hz to 500Hz) 50pF
600V 100mV RPM2-M 15 to 5000RPM
±2.2%rdg±5dgt Range Accuracy Selectable Number of Cylinders
1000V 1V
(50Hz to 500Hz) Dwell Angle 0° to 360° ±1.2°/krpm±1dgt 1,2,3,4,5,6,8,10,12
Range Resolution Accuracy Voltage Drop Duty Cycle 0% to 100% ±0.04%/krpm/cyl±2dgt 1,2,3,4,5,6,8,10,12
600μA 0.1μA ±0.7%rdg±3dgt Range Accuracy
0.25mV /μA
6000μA 1μA ±0.5%rdg±3dgt Fuel Injection 0.05ms to
±0.05ms±1dgt
DC 60mA 0.01mA ±0.7%rdg±3dgt Pulse Width 250.0ms
2.5mV / mA
Current 600mA 0.1mA ±0.5%rdg±3dgt Duty Cycle 0% to 100% ±0.04%/krpm±2dgt
6A 1mA ±0.7%rdg±3dgt Range Accuracy Test Current
Equipped with an 0.03V / A
±1.0%rdg±3dgt
10A 10mA ±0.5%rdg±3dgt 1.000V 0.50mA
Useful Carrying Case 600μA 0.1μA ±2.2%rdg±5dgt
Diode Test
Open Circuit Voltage : <1.6V DC
0.25mV /μA
6000μA 1μA ±2.0%rdg±5dgt Range Resolution Accuracy
AC 60mA 0.01mA ±2.2%rdg±5dgt -50℃ to 1000℃ 1°C ±0.5%rdg±3dgt
2.5mV / mA Temperature
-58°F to 1832°F 1°F
Analog Multitesters
Current 600mA 0.1mA ±2.0%rdg±5dgt ±0.5%rdg±6dgt
6A 1mA ±2.2%rdg±5dgt Continuity Buzzer Sound : Approx. 10 to 200Ω or less
0.03V / A
10A 10mA ±1.2%rdg±5dgt Test
Range Resolution Accuracy Open Circuit Voltage Range Resolution Accuracy
600Ω 0.1Ω ±0.5%rdg±6dgt 6.000μF 0.001μF ±2.0%rdg±5dgt
6kΩ 1Ω 0.01μF
±0.5%rdg±3dgt Capacitance 60.00μF ±3.5%rdg±5dgt
Resistance 60kΩ 10Ω 600.0μF 0.1μF
0.45V DC
600kΩ 100Ω ±0.8%rdg±4dgt 2000μF 1μF ±4.0%rdg±5dgt
6MΩ 1kΩ ±1.0%rdg±5dgt Bargraph, Range Hold, Display Hold, Auto Power Off, Backlight,
Functions
60MΩ 10kΩ ±1.5%rdg±5dgt Error input warning
Automot Automot
KT-2ive DMM KT-2ive DMM
021 021
12
Automotive Digital Multimeters
Motorcycle Multimeter
Automotive Testers
AC/DC AC/DC
A Ω
RNG DISP Range Resolution Accuracy Input Impedance
RPM APS
V HOLD HOLD 200mV 0.1mV ≧100MΩ
2V 1mV
DC ≒11MΩ
20V 10mV ±1.2%rdg±2dgt
Voltage
200V 100mV
≒10MΩ
300V 1V
FEATURES 2V 1mV
≒11MΩ
● RPM, 20mA and 20A DC / AC, and Continuity Tests. AC 20V 10mV
Voltage ±2.3%rdg±7dgt
(Non-usable for Harley-Davidson V-twin engine 45°angle) 200V 100mV
≒10MΩ
300V 1V
● 200A DC / AC measurements by optional 660 Clamp Range Resolution
Accuracy Voltage Drop
Adapter. 20mA 10μA ±1.0%rdg±4dgt ≦0.5V
0 to 10.00A
DC
Current 20A ±1.5%rdg±2dgt
SPECIFICATIONS 10mA <0.5V
10.01 to 20A
Display : 2000 count LCD, Maximum Reading 1999 ±2.5%rdg±4dgtt
Clamp Meters
650 RPM Sensor (x 1), 940 Alligator Clips (x 1 set) Open Circuit Voltage : approx. ≦0.43V
995 Carrying Case (x 1), 1.5V R6P Batteries (x 2) Range Resolution Accuracy Sparks
12000RPM 1 spark / 1 revolution
Spare Fuses F12 (0.3A / 250V) & RPM 10RPM ±2%rdg±10dgt
6000RPM 2 sparks / 1 revolution
F18 (15A / 250V) x 1 each Continuity
2kΩ (Buzzer Sound : Approx. 500Ω or less)
Test
OPTIONAL ACCESSORIES Range Resolution Test Current
660 AC / DC Clamp Adapter 944 Test Pin 2V 1mV ≦0.6mA
Diode Test
Open Circuit Voltage : ≦1.7V
100-41 Test Lead Kit 946 Battery Clip Functions Range Hold, Display Hold, Auto Power Save
100-62 Test Lead Set 793 Coil-Type Contact Pin
948 Alligator Clips
SK-6597
FEATURES Range Resolution Accuracy Input Impedance
● Current measurement up to AC / DC 400mA. 400mV 0.1mV ≧100MΩ
4V 1mV ±0.5%rdg±3dgt ≒11MΩ
● Penlight and backlight LCD. DC
Voltage 40V 10mV
Analog Multitesters
Advantages of SK-6597
Accessories
13
Digital Multimeters (Probe Tester)
Automotive Testers
AC/DC
V Ω Hz
DUTY MAX DISP
DIFF APO
% MIN HOLD
Clamp Meters
Sampling Rate : 3 times / sec.
Range Resolution Accuracy Test Current
Range Selection : Auto Ranging 400Ω 0.1Ω ±1.5%rdg±4dgt ≦0.2mA
Power Supply : 3V CR2032 Battery (x 1) 4.0kΩ 1Ω ≦50μA
40kΩ 10Ω ±1.0%rdg±3dgt ≦5μA
CE Mark : CATⅢ 600V and EMC Resistance 400kΩ 100Ω ≦0.5μA
Dimensions : 179(H) x 28(W) x 20(D) mm 4.0MΩ 1kΩ ±5.0%rdg±3dgt
≦50nA
40MΩ 10kΩ ±7.0%rdg±3dgt
Weight : 60g
Open Circuit Voltage : ≒0.44V
Accessories : 100-52 Test Leads (x 1), 1006 Carrying Case (x 1) Continuity
Test 400Ω (Buzzer Sound : Approx. 60Ω or less)
3V CR2032 Battery (x 1)
1V ±5.0%rdg±3dgt ≦0.7mA
Diode Test
OPTIONAL ACCESSORIES Open Circuit Voltage : ≦1.7V
125V
200MΩ
250V
2000MΩ
500V
2000MΩ
1000V
2000MΩ
LOW
Ω
AC/DC
V SK-3502
DATA DISP Simple Simple SPECIFICATIONS
APS
Digital Multimeters
COMP MEMO HOLD Dust Proof Water Resistant
Display : 4000 count LCD, Maximum reading 4000
Sampling Rate : 2 times / sec
Power Supply : 1.5V R6P or AA Batteries (x 8)
Fuse : F22 (0.5A / 600V) x 1
CE Mark : CATⅣ 600V CLASSⅡand EMC
Dimensions : 120(H) x 130(W) x 70(D) mm
Weight : 600g
Accessories : 100-61 Test Leads (x 1 set), 945B Black Alligator Clip (x 1)
1016 Carrying Case (x 1), 1.5V RW6P Batteries (x 8)
Spare Fuse F22 (0.5A / 600V) x 1 (built-in)
Analog Multitesters
Rated Test Voltage (DC) 125V 250V 500V 1000V
Max. Effective Reading 200MΩ 2000MΩ
Center Reading 5MΩ 50MΩ
Insulation 1st effective range 0.200 to 10 MΩ 0.200 to 100 MΩ
Resistance Accuracy ±3%rdg±4dgt
2nd effective range 0 to 0.199 MΩ,
0 to 0.199 MΩ, 100.1 to 2000 MΩ
10.01 to 200.0 MΩ
Accuracy ±5%rdg±5dgt
Display Range (Auto-ranging) 20.00Ω 400.0Ω
Low Accuracy (After 0Ω Adjustment) ±3%rdg±5dgt
Resistance Measurement Current 200mA or more Approx. 10mA
Open Circuit Voltage 6V or more
Range DCV / ACV fixed (0V to 600V) AUTO (10V to 600V)
AC / DC
Voltage Accuracy ±3%rdg±5dgt
OPTIONAL ACCESSORIES Input Resistance Approx. 660kΩ
766B Black Test Prod (with 767B Black Test Pin) Functions Comparator, Data memory, Timer, Live wire warning, Safety lock, High voltage warning, Automatic discharge,
Other Testers
Insulation Resistance Test ③Detach service plug. ⑥Press Measure key with contacting the test pin on the
④Remove inverter cover, terminal.
for Hybrid Vehible
and detach motor cable
Why measuring this? and generator cable from
Checking insulated condition of motor or cable is essential the inverter.
for hybrid vehicles to prevent electric shock accident caused
by leakage of high-voltage circuit.
Accessories
14
Digital Tachometer
Focusing on Easy of Use Digital Tachometer
Automotive Testers
DISP
RPM HOLD APO
Sensor head is fixable by using velcro tape attached. Use 650 RPM Sensor (option)
Velcro tape
DIGITAL
DIGITAL TACHOME
TACHOME TER
TER
1 2 HI
1 2 (1Sec<) DISPLAY
HI DISPLAY HOLD
(1Sec<) POWER
HOLD POWER
SHIFT
SHIFT DH
DH
O2 Sensor Checker
FEATURES
● Deterioration level of O2 sensor can be checked easily Connection image
by bar-graph
● Rich, Lean, Average voltages and Cycle are displayed
Yellow
Check harness
Black
Red
SPECIFICATIONS
Other Testers
Test lead
Display : (Numerical) 999 count LCD, O2 ECU in vehicle side
sensor
(Bargraph) 13 segments
Sampling Rate : 500 times/second Black Red
(LCD : 1 time/second in stand-by mode)
Range Selection : Auto Ranging TEST AUTO
RICH
LEAN
AVG
APO
DH Z T1 T5 S
C
mV
Z T1 T5
DH (Test)
O2 SENSOR CHECKER
795 Test Pins: Red & Black (x 1 set) RICH RICH RICH
15
Clamp Meters Index
AC / DC Digital Clamp Meters
Automotive Testers
Model SK-7718
Display Counts 4000 4000 4000 4000 4000
Conductor Diameter φ27mm φ27mm φ19mm φ35mm φ35mm
Clamp Meters
DC Current 40A 40A 40A 400A 400A
400A 400A 400A 1000A 1000A
− − − − −
AC Current 40A 40A 40A 400A 400A
400A 400A 400A 1000A 1000A
− − − − −
− − − − −
Digital Multimeters
4kΩ 4kΩ − 4kΩ 4kΩ
40kΩ 40kΩ − 40kΩ 40kΩ
400kΩ 400kΩ − 400kΩ 400kΩ
4MΩ 4MΩ − 4MΩ 4MΩ
40MΩ 40MΩ − 40MΩ 40MΩ
Frequency ● ● ● ● ●
Duty Cycle ● ● ● ● ●
Pulse Width − − − − −
Continuity Test ● ● − ● ●
Analog Multitesters
Diode Test ● ● − ● ●
Capacitance ● ● − ● ●
Temperature − − − − −
True RMS ● − ● ● −
Auto Ranging ● ● ● ● ●
Manual Ranging − − − − −
MAX / MIN − ● ● ● ●
Average − − − − −
Peak Hold ● − ● ● −
Other Testers
Range Hold − − − − ●
Difference ● ● ● ● ●
Display Hold ● ● ● ● ●
Power-On Initialize ●*1 ●*1 ●*1 ●*1 ●*1
Comparator − − − − −
Low Pass Filter − − − − −
Output Terminal − − − − −
External Power Supply − − − − −
Dust Proof & Simple Water Resistant − − − ● ●
Accessories
16
Clamp Meters Index
AC / DC Digital Clamp Meters AC Digital Clamp Meters
Automotive Testers
Diode Test − − ● − ●
Capacitance − − ● − ●
Temperature ● ● − − −
True RMS ● ● ● − ●
Auto Ranging ● ● ● ● ●
Manual Ranging − − ● − −
MAX / MIN ● ● ● − ●
Average − − − − −
Peak Hold ● ● ● − −
Other Testers
Range Hold − − ● − −
Difference ● ● ● − ●
Display Hold ● ● ● ● ●
Power-On Initialize − − ●*1 − −
Comparator − − − − −
Low Pass Filter − − − − −
Output Terminal − ● − − −
External Power Supply − ● − − −
Dust Proof & Simple Water Resistant ● ● ● − −
Accessories
17
Clamp Meters Index
AC Digital Clamp Meters AC Leakage Clamp Meters
Automotive Testers
Model SK-7820 SK-7825
Display Counts 4000 2000 2000 4000 4000
Conductor Diameter φ27mm φ26mm φ42mm φ24mm φ40mm
Clamp Meters
DC Current − − − − −
− − − − −
− − − − −
AC Current 40A 2A 2A 40mA 40mA
400A 20A 20A 400mA 400mA
− 200A 200A 40A 40A
− 400A 600A 100A 100A
Digital Multimeters
4kΩ 2kΩ 2kΩ − −
40kΩ 20kΩ 20kΩ − −
400kΩ 200kΩ 200kΩ − −
4MΩ 2MΩ 2MΩ − −
40MΩ 20MΩ 20MΩ − −
Frequency ● − − − −
Duty Cycle ● − − − −
Pulse Width − − − − −
Continuity Test ● ● ● − −
Analog Multitesters
Diode Test ● ● ● − −
Capacitance ● − − − −
Temperature − − − − −
True RMS − − − − −
Auto Ranging ● ●*2 ●*2 ●*3 ●*3
Manual Ranging − − − − −
MAX / MIN ● − − − −
Average − − − − −
Peak Hold − − − − −
Other Testers
Range Hold − − − − −
Difference ● − − − −
Display Hold ● ● ● ● ●
Power-On Initialize − − − − −
Comparator − − − ●(with Vibration) ●(with Vibration)
Low Pass Filter − − − ● ●
Output Terminal − − − − −
External Power Supply − − − − −
Dust Proof & Simple Water Resistant − − − − −
Accessories
18
AC / DC Digital Clamp Meters
AC/DC AC/DC
V Ω Hz
DUTY
Conductor 400A %
Diameter
PEAK MAX AUTO DISP TRUE
HOLD MIN DIFF ZERO HOLD APO RMS
φ27mm
SK-7660 SK-7661 for DC Current SK-7660
measurement
Focused on High-Flexibility
AC/DC AC/DC DUTY
V Hz %
for Voltage
Conductor
400A measurement
Diameter
PEAK MAX AUTO DISP TRUE
DIFF APO RMS
Analog Multitesters
Voltage ±1.0%rdg±2dgt
Sampling Rate : 3 times / sec 400V
Range Selection : Auto Ranging 600V
V/V 4V
Conductor Diameter : φ19mm Max. AC 40V
Hz / % ±1.5%rdg±5dgt
Power Supply : 1.5V R6P or AA Batteries (x 2) Voltage 400V
600V
CE Mark : CATⅢ 300V and EMC 1Hz to
Frequency ±0.2%rdg±2dgt
Dimensions : 196(H) x 59(W) x 30(D) mm 49.99kHz
Weight : 180g 0% to
Duty Cycle ±0.5%rdg±5dgt
99.9%
Accessories : 100-57 Test Leads (x 1 set) MAX / MIN, Peak Hold, Difference,
940 Alligator Clips (x 1 set) Functions Power-on Initialize (for DC Current measurement),
Display Hold, Auto Power Off
1011 Carrying Case (x 1)
1.5V R6P Batteries (x 2)
Accessories
OPTIONAL ACCESSORIES
100-41 Test Lead Kit
100-62 Test Lead Set
948 Alligator Clips
793 Coil-Type Contact Pin
19
AC / DC Digital Clamp Meters
Automotive Testers
AC/DC AC/DC DUTY
1000A V Ω Hz %
PEAK MAX AUTO RNG DISP TRUE Dust Simple Water
Conductor
Diameter HOLD MIN DIFF ZERO HOLD HOLD APO RMS Proof Resistant
SK-7718 for DC Current SK-7719 SK-7718
φ35mm measurement
SK-7718
FEATURES Range Accuracy
● AC / DC 1000A Measurements 400A ±1.5%rdg±5dgt
AC 400 to 600A ±1.5%rdg±5dgt
● "Power-On Initialize" (auto zero adjustment) for DCA. Current 1000A
601 to 1000A ±3.0%rdg±5dgt
A/A ±1.5%rdg±3dgt
● MAX / MIN, Difference, Peak Hold (SK-7718), and Range 400A
Hz DC 400 to 600A ±1.5%rdg±3dgt
Hold (SK-7719) Current
Clamp Meters
1000A
601 to 1000A ±3.0%rdg±3dgt
● Dust-proof case is used to protect the tester from dust damage. Frequency 1Hz to 1kHz ±0.2%rdg±2dgt
4V
AC 40V
SPECIFICATIONS Voltage ±1.0%rdg±5dgt (40Hz to 400Hz)
400V
Display : 4000 count LCD, 600V
Maximum reading 9999 400mV
V/V 4V
Sampling Rate : 3 times / sec Hz・%
DC
40V ±1.0%rdg±3dgt
Voltage
Range Selection : Auto Ranging 400V
600V
Conductor Diameter : φ35mm Max. 1Hz to
Frequency ±0.2%rdg±2dgt
Power Supply : 9V 6F22 Battery (x 1)
Digital Multimeters
2 Channel Measurements on Dual Display LCD and Oscilloscope Connection
AC/DC AC/DC
V Ω Hz %
DUTY PULSE
1000A WIDTH
SK-7720 /SK-7722
Analog Multitesters
Conductor
Diameter
FEATURES SPECIFICATIONS
φ36mm ● Two different elements can be measured at once and
Display : 4000 count LCD, Maximum reading 9999
read on a bigger Dual Display LCD. Sampling Rate : 15 times / sec. (each channel),
● Analog Output Terminal for an Oscilloscope or Recorder (SK-7722).
3.75 times / sec. for A+V measurements
● Dust-proof case is used to protect the tester from dust damage.
in ordinary mode.
Range Selection : Auto Ranging
OPTIONAL ACCESSORIES
Conductor Diameter : φ36mm Max.
818-02 Temperature Probe 100-62 Test Lead Set
Power Supply : 9V 6F22 or NEDA 1604 Battery (x 1)
817-03 to 817-25 Temperature Probes 940 Alligator Clips
Dimensions : 200(H) x 64(W) x 33(D) mm
922 DC Adapter Cable (SK-7722) 948 Alligator Clips
Weight : 310g
930 Output Cord for Recorder 793 Coil-Type Contact Pin
Other Testers
SK-7720 SK-7722
Range Accuracy
400.0A ±1.5%rdg±3dgt
DC 400A / 1000A 400 to 600A ±1.5%rdg±1dgt
Current 601 to 1000A ±3.0%rdg±3dgt
A +V Range Accuracy Range Accuracy
DC 400V ±1.0%rdg±3dgt 40V ±1.0%rdg±3dgt
Voltage 650V ±1.0%rdg±1dgt 250V ±1.0%rdg±1dgt
50Hz to 60Hz 40Hz to 400Hz
AC 400.0A ±1.5%rdg±3dgt ±2.5%rdg±3dgt
Current 400A / 1000A 400 to 600A ±1.5%rdg±1dgt ±2.5%rdg±1dgt
A + Hz 601 to 1000A ±3.0%rdg±3dgt ±4.0%rdg±3dgt
Accessories
20
AC / DC Digital Clamp Meters
AC/DC AC/DC
V Ω Hz
DUTY
2000A %
PEAK MAX AUTO RNG DISP TRUE Dust Simple Water
HOLD MIN DIFF ZERO HOLD HOLD APS RMS Proof Resistant
Conductor
Diameter for DC Current
measurement
φ55mm
SK-7708
FEATURES SPECIFICATIONS
● "Power-On Initialize" (auto zero adjustment) for DCA.
Display : 4000 count LCD,
● Peak Hold, MAX / MIN measurements.
Maximum reading 5120
● Dust-proof case is used to protect the tester from dust damage.
Sampling Rate : 3 times / sec
Clamp Meters
Range Accuracy
50Hz to 60Hz 40Hz to 1kHz
AC 400A ±1.5%rdg±5dgt ±3.0%rdg±5dgt
Current 0 to 1000A ±1.5%rdg±5dgt ±3.0%rdg±5dgt
A/A 2000A
1001A or more ±3.0%rdg±5dgt
Hz DC 400A
Current 2000A ±1.5%rdg±5dgt
Frequency 1Hz to 4.999kHz ±0.2%rdg±2dgt
AC 40Hz to 400Hz 401Hz to 1KHz
Voltage 4V / 40V / 400V / 600V ±1.5%rdg±5dgt ±3.0%rdg±5dgt
V/V DC Voltage 400mV / 4V / 40V / 400V / 600V ±1.2%rdg±3dgt
Hz・% Frequency 1Hz to 100kHz ±0.2%rdg±2dgt
Duty Cycle 0.1% to 99.9% ±2.0%rdg±2dgt
400Ω ±1.5%rdg±5dgt
4kΩ / 40kΩ / 400kΩ ±1.0%rdg±3dgt
Resistance
Digital Multimeters
4MΩ ±3.0%rdg±4dgt
40MΩ ±5.0%rdg±7dgt
400Ω ±1.5%rdg±5dgt
Continuity Test
Buzzer Sound : Approx. 50Ω or less
0 to 1.5V ±5.0%rdg±5dgt
Diode Test
Open Circuit Voltage : ≦1.7V
Capacitance 50 / 500nF / 5 / 50 / 100μF ±5.0%rdg±10dgt
Functions MAX / MIN, Peak Hold, Difference, Power-on Initialize (for DC Current measurement), Range Hold, Display Hold, Auto Power Save
φ27mm
FEATURES SPECIFICATIONS
● Simple operation.
Display : 4000 count LCD,
● Strong and beaked Clamp Head against twists.
Maximum reading 4000
● AUTO POWER OFF : turns off automatically after
Sampling Rate : 2.5 times / sec
12 minutes. Range Selection : Auto Ranging
Other Testers
Range Accuracy
AC 40A
Current ±1.8%rdg±5dgt
300A
Accessories
21
AC Digital Clamp Meters
Automotive Testers
AC AC/DC DUTY
Conductor 400A V Ω Hz %
Diameter
MAX DISP TRUE
φ27mm MIN DIFF HOLD APO RMS
SK-7602
Clamp Meters
40V
Voltage ±1.0%rdg±2dgt
● Easy-to-clamp compact & beaked clamp head even for 400V
600V
narrow conductors.
V/V 4V
● True RMS (SK-7660), MAX/MIN and Difference measurement. AC 40V
Hz / % ±1.5%rdg±5dgt (40Hz to 400Hz)
Voltage 400V
600V
SPECIFICATIONS
5Hz to
±0.2%rdg±2dgt
Display : 4000 count LCD, Maximum reading 4050 Frequency
49.99kHz
Sampling Rate : 3 times / sec Duty Cycle 5% to 95% ±2.0%rdg±3dgt
400Ω ±1.5%rdg±5dgt
Range Selection : Auto Ranging 4kΩ
Conductor Diameter : φ27mm Max. 40kΩ ±0.7%rdg±3dgt
Digital Multimeters
Easy - to - Clamp Avoid Your Test Lead
SK-7602 / 7603's compact and Fingers Slips Holder
beaked clamp heads assure SK-7602 / 7603 are always fit Fixable Test Lead on the side
easy clamping even for narrow on your hand. Double-Molding of SK-7602 / 7603 by inserting
conductors. Rubbers on a Function Switch its hook into the holder socket.
and a Trigger avoid your fingers Useful for Voltage, Resistance,
slips during operation. Capacitance Measurements,
Continuity and Diode Tests.
φ27mm MAX
Analog Multitesters
High Quality Clamp Meter that contains DMM functions
AC AC/DC
Conductor 400A V Ω
Diameter
DISP
φ26mm HOLD APO
22
AC Digital Clamp Meters
AC AC/DC
Conductor
Diameter 600A V Ω
DISP
φ42mm HOLD APO
AC
Voltage 2V/20V/200V/600V ±1.0%rdg±5dgt
OPTIONAL ACCESSORIES
Accessories : 100-57 Test Leads (x 1 set) 100-41 Test Lead Kit
983 Carrying Case (x 1) 100-62 Test Lead Set
1.5V LR-44 Batteries (x 2) 940 Alligator Clips
948 Alligator Clips
793 Coil-Type Contact Pin
SK-7825
SK-7820
SK-7820 SK-7825
23
Insulation Testers Index
Automotive Testers
Model SK-3002 SK-3003 SK-3500 SK-3502
Digital / Analog Analog Analog Digital Digital
Measurement Ranges 2-Ranges 2-Ranges 4-Ranges 4-Ranges
Insulation Resistance 250V 500V 50V 125V
Clamp Meters
500V 1000V 125V 250V
− − 250V 500V
− − 500V 1000V
Low Resistance − − ● ●
DC Voltage − − ● ●
AC Voltage ● ● ● ●
Continuity Test − − − −
Digital Multimeters
Analog Insulation Testers
Analog Multitesters
SK-3003
SK-3002/SK-3003/SK-3005
SPECIFICATIONS OPTIONAL ACCESSORIES
Power Supply : 1.5V R6P or AA Batteries (x 8) 940R Red Alligator Clip
Dimensions : 165(H) x 100(W) x 45(D) mm
Weight : 540g
Accessories : 100-34 Test Leads (x 1 set), 939 Test Pin (x 1)
978 Carrying Case (x 1), 1.5V R6P Batteries (x 8)
Core
Conductor Power Source
L side E side
Insulator
Lead OFF
Coating
Load
Rated Test Voltage (DC) 250V 500V 500V 1000V 500V 1000V
Max. Effective Reading 50MΩ 100MΩ 1000MΩ 2000MΩ 100MΩ 2000MΩ
Effective range 0.05 to 50MΩ 0.1 to 100MΩ 1 to 1000MΩ 2 to 2000MΩ 0.1 to 100MΩ 1 to 2000MΩ
Insulation Center Scale 1MΩ 2MΩ 20MΩ 50MΩ 2MΩ 40MΩ
Resistance Terminal Voltage Infinite Scale : ±10% of Rated Voltage Center Scale : Over 90% of Rated Voltage
Accuracy First effective range : ±5% of reading value
Second effective range : ±10% of reading value
Zero and Infinite : ±0.7% of scale length
AC Range 0 to 600V
Voltage Accuracy ±3% of full scale value
Timer Approx. 3 minutes
Battery Check by Battery Scale on BATT. CHECK position
24
Digital Insulation Testers
SK-3500 SK-3502
SK-3500/SK-3502
FEATURES
● Wide Range of Insulation Measurement with Enhanced Safety.
● Comparator Function.
SPECIFICATIONS
Display : 4000 count LCD, Maximum reading 4000
Sampling Rate : 2 times / sec
Power Supply : 1.5V R6P or AA Batteries (x 8)
Fuse : F22 (0.5A / 600V) x 1
CE Mark : CATⅣ 600V CLASSⅡand EMC
Dimensions : 120(H) x 130(W) x 70(D) mm
Weight : 600g
Accessories : 100-61 Test Leads (x 1 set), 945B Black Alligator Clip (x 1)
Insulation Testers / Earth Tester
SK-3502
1016 Carrying Case (x 1), 1.5V RW6P Batteries (x 8)
Spare Fuse F22 (0.5A / 600V) x 1 (built-in)
OPTIONAL ACCESSORIES
766B Black Test Prod (with 767B Black Test Pin)
940R Red Alligator Clip
948R Red Alligator Clip
SK-3500 SK-3502
Rated Test Voltage (DC) 50V 125V 250V 500V 125V 250V 500V 1000V
Max. Effective Reading 200MΩ 2000MΩ 200MΩ 2000MΩ
Center Reading 5MΩ 50MΩ 5MΩ 50MΩ
Insulation 1st effective range 0.200 to 10 MΩ 0.200 to 100 MΩ 0.200 to 10 MΩ 0.200 to 100 MΩ
Resistance Accuracy ±3%rdg±4dgt ±3%rdg±4dgt
Digital Multimeters
Measure 4MΩ
Other Testers
Up to 100 data can be saved in internal memory together with their measured
date and time. (for Insulation Resistance and Low Resistance) Measure 40MΩ
Measured
Time
Accessories
Measured
Date
Measured
Year
Selectable by SELECT Key
25
Digital Multimeters Index
Automotive Testers
Model
Display Counts 4000 4000 4000 4000
Bargraph − − − −
DC Voltage 400mV 400mV 400mV 400mV
Clamp Meters
4V 4V 4V 4V
40V 40V 40V 40V
400V 400V 400V 400V
600V 600V 1000V 1000V
− − − −
AC Voltage 400mV 400mV 4V 4V
4V 4V 40V 40V
Digital Multimeters
AC Current 40mA 400μA 40mA 400μA
400mA 4000μA 400mA 4000μA
10A 40mA 4A 40mA
− 400mA 20A 400mA
− 4A − 4A
− 10A − 20A
Resistance 400Ω 400Ω 400Ω 400Ω
4kΩ 4kΩ 4kΩ 4kΩ
40kΩ 40kΩ 40kΩ 40kΩ
Analog Multitesters
400kΩ 400kΩ 400kΩ 400kΩ
4MΩ 4MΩ 4MΩ 4MΩ
40MΩ 40MΩ 40MΩ 40MΩ
Frequency ● ● ● ●
Duty Cycle ● ● ● ●
Continuity Test ● ● ● ●
Diode Test ● ● ● ●
Capacitance ● ● − ●
Temperature − ● − −
Other Testers
True RMS − − − −
Auto Ranging ● ● ● ●
Manual Ranging ● ● ● ●
MAX / MIN − − − −
Range Hold ● ● ● ●
Difference ● ● − ●
Display Hold ● ● − ●
Comparator − − − −
Current by Clamp Adapter ● ● ● ●
Accessories
26
Digital Multimeters Index
Automotive Testers
4V 4V 4.0V 4V 4V
40V 40V 40V 40V 40V
400V 400V 400V 400V 400V
1000V 600V 600V 600V 600V
− − − − −
AC Voltage 400mV 4V 4.0V 400mV 400mV
4V 40V 40V 4V 4V
Insulation Testers / Earth Tester
True RMS − − − − ●
Auto Ranging ● ● ● ● ●
Manual Ranging ● − − ● ●
MAX / MIN ● ● ● − −
Range Hold ● − − ● ●
Difference ● ● ● − −
Display Hold ● ● ● − −
Comparator − − − ● ●
Current by Clamp Adapter ● − − ● ●
Accessories
27
Digital Multimeters Index
Automotive Testers
Model KU-1199
Display Counts 4000 4000 2000
Bargraph − − −
DC Voltage 400mV 400mV 200mV
Clamp Meters
4.0V 4V 2V
40V 40V 20V
400V 400V 200V
600V 500V 600V
− − −
AC Voltage 4.0V 400mV 2V
40V 4V 20V
Digital Multimeters
AC Current − − −
− − −
− − −
− − −
− − −
Analog Multitesters
400kΩ 400kΩ 200kΩ
4.0MΩ 4MΩ 2MΩ
40MΩ 40MΩ 20MΩ
Frequency ● − −
Duty Cycle ● − −
Continuity Test ● ● ●
Diode Test ● ● ●
Capacitance ● − −
Temperature − − −
Other Testers
True RMS − − −
Auto Ranging ● ● ●
Manual Ranging ● − −
MAX / MIN ● − −
Range Hold ● − −
Difference ● − −
Display Hold ● − ●
Comparator − − −
Current by Clamp Adapter − − −
Accessories
28
Digital Multimeters (Handy Type)
High Cost Performance, Temperature Measurement (KU-2602)
Automotive Testers
AC/DC AC/DC
A Ω Hz
DUTY
V %
KU-2602
RNG DISP
DIFF HOLD HOLD APO
KU-2600/KU-2602
FEATURES OPTIONAL ACCESSORIES
● Temperature Measurement. (Temperature Probe is provided) 660 AC / DC Clamp Adapter
(KU-2602) 817-03 to 817-25 Temperature Probes (KU-2602)
● Tilt Stand and Test Lead Holder on rear side. 100-41 Test Lead Kit
● Display Hold, Range Hold functions. 100-62 Test Lead Set
Clamp Meters
External
Open Circuit Voltage : Approx. 0.44V 200℃ to 500℃ ±1.5%rdg±3℃
9.999Hz to 0.01Hz to 9.999Hz to 0.01Hz to
Frequency ±0.2%rdg±1dgt Frequency ±0.02%rdg±5dgt
9.999MHz 1.0kHz 9.999MHz 1.0kHz
0% to 0.1% to
Duty Cycle 0.1% ±0.2%rdg±2dgt Duty Cycle 0.1% ±2%rdg±5dgt
99.9% 99.9%
Continuity Continuity
Test 400Ω (Buzzer Sound : Approx. 50Ω or less) Test 400Ω (Buzzer Sound : Approx. 60Ω or less)
4V ±5.0%rdg±3dgt 4V ±5.0%rdg±3dgt
Diode Test Diode Test
Open Circuit Voltage : ≦1.5V Open Circuit Voltage : ≦1.5V
0.1nF to 40nF / 40nF to 40μF / 40μF to 200μF 4 / 40 / 400nF / 4 / 40 / 200μF
Capacitance Capacitance
(±3.0%rdg±5dgt) (±2.0%rdg±5dgt)
Difference, Range Hold, Display Hold, Difference, Range Hold, Display Hold,
Functions Functions
Auto Power Off, Reset Auto Power Off, Reset
Other Testers
Features of KU-2600/KU-2602
29
Digital Multimeters (Handy Type)
Automotive Testers
AC/DC AC/DC
A Ω Hz
DUTY RNG DISP
DIFF APS
V % HOLD HOLD
SK-6163 SK-6163 SK-6163
Clamp Meters
40m/400mA 0.01m/0.1mA ±1%rdg±1dgt 2mV/mA
(except frequency duty cycle, capacitance 4A 1mA ±1.5%rdg±2dgt 30mV/A
DC
measurements) Current 0∼10.00A
±1.5%rdg±2dgt
Range Selection : Auto / Manual Ranging 20A 10mA 30mV/A
10.01∼20.00A
Power Supply : 1.5V R6P or AA Batteries (x 2) ±2.5%rdg±4dgt
400μ/4000μA* 0.1μ/1μA ±1.5%rdg±5dgt 0.11mV/μA
Fuse : F14 (0.5A / 250V) x 1 40m/400mA 0.01m/0.1mA ±1.5%rdg±5dgt 2mV/mA
F16 (15A / 250V) x 1 4A 1mA ±2%rdg±7dgt 30mV/A
AC
0∼10.00A
SK-6161 Dimensions : 160(H) x 75(W) x 34(D) mm, Current
±2%rdg±7dgt
Weight : 180g 20A 10mA 30mV/A
10.01∼20.00A
Digital Multimeters
Functions
Auto Power Save
* 400μA / 4000μA range is SK-6163 only.
OPTIONAL ACCESSORIES
660 AC / DC Clamp Adapter 940 Alligator Clips
100-41 Test Lead Kit 948 Alligator Clips
100-62 Test Lead Set 793 Coil-Type Contact Pin
SK-6163
Analog Multitesters
AC/DC AC/DC
V A Ω Hz
FEATURES Range Resolution Accuracy Input Impedance
BAR MAX
DIFF
RNG DISP
APS 400mV 100μV ≧100MΩ
GRAPH MIN HOLD HOLD ● Large LCD with Bargraph. ±0.5%rdg±2dgt
4V 1mV ≒11MΩ
● Tough designed case with Dust-proof and DC
Dust Simple Water Voltage 40V 10mV
Proof Resistant Water-resistant structure. 400V 100mV ±0.8%rdg±1dgt ≒10MΩ
1000V 1V
400mV 100μV ±2.0%rdg±7dgt ≧100MΩ
SPECIFICATIONS 4V 1mV ≒11MΩ
AC
Display : (Numerical) 4000 count LCD, Voltage 40V 10mV
±1.5%rdg±5dgt
400V 100mV ≒10MΩ
Maximum Reading 9999
750V 1V
(Bargraph) 40 segments Range Resolution Accuracy Voltage Drop
(1 segment / 100 digits) 40mA / 40mV(40mA)
Other Testers
100μA ±1.2%rdg±2dgt
400mA 400mV(400mA)
Sampling Rate : (Numerical) 3 times / sec DC 0 to 10.00A
(Bargraph) 30 times / sec Current ±2.0%rdg±2dgt 130mV(4A)
4A / 20A 10mA
10.01 to 20A 350mV(10A)
Range Selection : Auto / Manual Ranging
±2.5%rdg±4dgt
Power Supply : 1.5V R6P or AA Batteries (x 2) 40mA / 40mV(40mA)
100μA ±2.5%rdg±5dgt
Fuse : F33 (15A / 1000V) x 1, F34 (2A / 1000V) x 1 400mA 400mV(400mA)
AC 0 to 10.00A
CE Mark : CATⅡ600V and EMC Current ±2.5%rdg±5dgt 130mV(4A)
4A / 20A 10mA
Dimensions : 180(H) x 86(W) x 35(D) mm 10.01 to 20A 350mV(10A)
±3.0%rdg±10dgt
Weight : 320g Range Resolution Accuracy Test Current
Accessories : 100-57 Test Leads (x 1 set) 400Ω 100mΩ ±1.0%rdg±2dgt ≦0.5mA
1.5V R6P Batteries (x 2) 4kΩ 1Ω ≦0.2mA
40kΩ 10Ω ±0.7%rdg±2dgt ≦40μA
Accessories
30
Digital Multimeters (Probe Tester)
AC/DC AC/DC
A Ω Hz
DUTY
V %
MAX DISP PEN
MIN DIFF HOLD APO LIGHT
SK-6597
FEATURES Range Resolution Accuracy Input Impedance
● Current measurement up to AC / DC 400mA. 400mV 0.1mV ≧100MΩ
4V 1mV ±0.5%rdg±3dgt ≒11MΩ
● Penlight and backlight LCD. DC
Voltage 40V 10mV
400V 100mV ≒10MΩ
±1.0%rdg±3dgt
SPECIFICATIONS 600V 1V
50Hz to 500Hz
Display : 4000 count LCD
Clamp Meters
4V 1mV ≒11MΩ
Sampling Rate : 3 times / sec. AC
Voltage 40V 10mV
±1.5%rdg±5dgt
Range Selection : Auto Ranging 400V 100mV ≒10MΩ
600V 1V
Power Supply : 1.5V LR44 Battery (x 2) Frequency 1Hz to 100kHz 0.001 to 100Hz ±0.2%rdg±2dgt
Fuse : F22 (0.5A / 600V) x 1 Duty Cycle 0.0% to 99.9% 0.1% ±0.5%rdg±5dgt
Range Resolution Accuracy Burden Voltage
CE Mark : CATⅢ 600V and EMC 40mA 10μA <0.1V
DC
±1.0%rdg±2dgt
Dimensions : 209(H) x 38(W) x 32(D) mm Current 400mA 100μA <0.6V
AC Current 40mA 10μA <0.1V
Weight : Approx. 110g (include battery) ±1.5%rdg±7dgt
40Hz to 500Hz 400mA 100μA <0.6V
Accessories : 100-68 Test Lead (Black) (x 1) Frequency 10Hz to 100kHz 0.01 to 100Hz ±0.2%rdg±2dgt
Insulation Testers / Earth Tester
Advantages of SK-6597
Digital Multimeters
(compared to the existing model) Gold-plated Test Pin and Test Lead Tip
%
MAX DISP
MIN DIFF HOLD APO
Other Testers
31
Digital Multimeters (Bench-Top DMM)
Automotive Testers
AC/DC AC/DC SK-4033/SK-4035
A Ω
RNG TRUE
COMP
V HOLD RMS
SK-4035 FEATURES
● Output terminals to connect and control the external
inspection equipments.
● SK-4035 assures the accurate measurementby True RMS.
production line.
Output
Terminals ● Easy-to-use simple lay out keys Easy-to-read large display.
SPECIFICATIONS
Display : 4000 count LCD
Clamp Meters
Sampling Rate : 10 times / sec
Range Selection : Auto / Manual Ranging
Power Supply : AC adapter
Fuse : F29 (3A/600V ) x 1, F30 (10A/600V ) x 1
F31 (0.5A/250V) x 2
Dimensions : 95(H) x 200(W) x 260(D) mm,
Weight : 1,140g
SK-4035 Accessories : 100-57 Test Leads (x 1 set), AC Adapter
Spare Fuse F31 (0.5A / 250V) x 1
Digital Multimeters
10A 10mA ±1.5%rdg±2dgt <0.5V
400μA /4000μA 0.1μA/1μA <0.05V / <0.25V
AC 40mA 10μA <0.1V
Current 400mA ±1.5%rdg±6dgt(50Hz∼500Hz)
100μA <0.6V
10A 10mA <0.5V
Range Resolution Accuracy Open Circuit Voltage Test Current
400Ω 0.1Ω ±0.3%rdg±3dgt 2.4V ≦1.1mA Waster
4kΩ 1Ω ≦110μA
40kΩ 10Ω ±0.3%rdg±2dgt ≦12.0μA
Resistance
400kΩ 100Ω 1.2V ≦1.2μA
4MΩ 1kΩ ±1%rdg±2dgt ≦0.12μA
40MΩ 10kΩ ±3%rdg±4dgt ≦0.12μA
Functions Comparator, Range Hold
Analog Multitesters
Digital Multimeters (All-in-one DMM)
High-Precision DMM
AC/DC
V Ω Hz
DUTY
%
MAX RNG DISP
MIN DIFF HOLD HOLD APS
Other Testers
32
Digital Multimeters (Card-Type DMM)
AC/DC
V Ω APO
KU-1199
FEATURES Range Resolution Accuracy Input Impedance
● Auto-SCAN Measurement. No need for selecting 400mV 100μV
4V 1mV
DC ±0.5%rdg±3dgt
DC/AC Voltages and Resistance ranges. Voltage
40V 10mV ≒5MΩ
● Only 11mm thick and 72g in Weight. 400V 100mV
500V 1V ±0.8%rdg±3dgt
● Easy-to-read largeLCD. 400mV 100μV ±1.0%rdg±8dgt (100mV∼)
● Equipped with carrying case. 4V 1mV
AC
Voltage 40V 10mV ±0.8%rdg±3dgt ≒5MΩ
● Gold-plated Test Lead Pins.
400V 100mV
Clamp Meters
500V 1V ±1.2%rdg±3dgt
SPECIFICATIONS
Range Resolution Accuracy
Display : 4000 count LCD 400Ω 0.1Ω ±1.0%rdg±5dgt
Sampling Rate : 3 times / sec 4kΩ 1Ω
40kΩ 10Ω
Range Selection : Auto Ranging ±1.0%rdg±3dgt
Resistance 400kΩ 100Ω
Power Supply : 1.5V LR44 Batteries (x 2) 4MΩ 1kΩ
40MΩ 10kΩ ±2.0%rdg±3dgt
CE Mark : CATⅡ500V and EMC
Open Circuit Voltage : ≦0.25V
Dimensions : 112(H) x 56(W) x 11(D) mm Continuity
Test 400Ω (Buzzer Sound : 12Ω to 70Ω)
Weight : Approx. 72g
2V ±5.0%rdg±3dgt 1±0.6mA
Insulation Testers / Earth Tester
OPTIONAL ACCESSORY
940 Alligator Clips
948 Alligator Clips
793 Coil-Type Contact Pin
Auto-SCAN Measurement
HOLD APO
FEATURES SPECIFICATIONS
● Compact & Light Weight.
Display : 2000 count LCD
● Wide Measurement Ranges.
Sampling Rate : 3 times / sec
● Gold-plated Test Lead Pins.
Range Selection : Auto Ranging
● Large Rotary Switch.
Power Supply : 3V CR2032 Battery (x 1)
● Useful Functions.
CE Mark : CATⅡ600V, CATⅢ 300V and EMC
Dimensions : 109(H) x 55(W) x 9(D) mm
OPTIONAL ACCESSORY
Weight : Approx. 60g
Other Testers
33
Analog Multitesters
DC 12A measurement
Automotive Testers
AC/DC DC KF-32
V A Ω
FEATURES Internal
Range Tolerance
● DC 12A measurement. Resistance
DC Voltage 0.3 / 3 / 12 / 30 / 120 / 300 / 1200V 20kΩ/V ±3% f.s.
SPECIFICATIONS AC Voltage 12 / 30 / 120 / 300 / 1200V 10kΩ/V ±4% f.s.
Power Supply : 1.5V R6P or AA Battery (x 1) DC Current 60μ / 3m / 30m / 600m / 12A ±3% f.s.
Resistance 5k / 500k / 5MΩ(×1 / ×100 / ×1k) ±3% f.s. length
Fuse : F15 (0.75A / 250V) x 1
Continuity
Dimensions : 136(H) x 90(W) x 30(D) mm Tests Buzzer sounds less than approx. 30Ω
Clamp Meters
Spare Fuse F15 (0.75A / 250V) x 1 (built-in)
100-41 Test Lead Kit 948 Alligator Clips
100-62 Test Lead Set 793 Coil-Type Contact Pin
940 Alligator Clips
Advantages of KF-32
DC12A Ranges Easy-to-read large character Test Leads with gold plated pins
Big current can be measured in DC 12A range.
KF-20
SPECIFICATIONS
Digital Multimeters
Internal
Range Tolerance
Resistance
Power Supply : 1.5V R6P or AA Battery (x 1)
Fuse : F12 (0.3A / 250V) x 1 DC
Voltage 0.3 / 3 / 12 / 30 / 120 / 300 / 1200V 20kΩ/V ±3% f.s.
Dimensions : 136(H) x 90(W) x 30(D) mm
AC
Weight : 215g Voltage 12 / 30 / 120 / 300 / 1200V 10kΩ/V ±4% f.s.
Accessories : Holster DC
Current 60μ/ 3m / 30m / 300mA ±3% f.s.
100-51 Test Leads (x 1 set)
1.5V R6P Battery (built-in & spare) x 1 each Resistance 5k / 500k / 5MΩ ±3% f.s. length
1.5V (R20P / R14P / R6P)
Spare Fuse F12 (0.3A / 250V) x 1 Battery
Test 1.5V 250mA (Hi Range)
1.5V 50mA (Low Range)
OPTIONAL ACCESSORIES
100-41 Test Lead Kit 948 Alligator Clips
Analog Multitesters
100-62 Test Lead Set 793 Coil-Type Contact Pin
940 Alligator Clips
μT mG MAX
MIN
AVE
RAGE
DISP
HOLD APO SK-8301 TRIAXIAL ELF MAGNETIC FIELD METER
FEATURES Advantages of SK-8301
Other Testers
SPECIFICATIONS
In the field of multiple
Display : 2000 count LCD, Maximum Reading 2000 electromagnetic sources
Operating Principle : Triaxial True RMS (X, Y, Z) Electromagnetic comes from
Sampling Rate : 2 times / second mixed directions if multiple
Y
Range Selection : Auto Ranging Z sources are existing. Even
in such field., SK-8301 can
Rectification : True RMS
TRIAXIAL ELF
MAGNETIC FIELD METER
X
X Y, Z) sensor.
REC DH
SK-8301
34
Digital Sound Level Meter
For Sound Level Check of Living Environment
Automotive Testers
SOUND
MAX DISP
APO
dB MIN HOLD
KG-70
FEATURES
● Select frequency weighting (A/C). Sound levels in everyday life
● Select time weighting (FAST/SLOW). Noisy sound such as from factory, airplane, or
● Rubber Grip. automobile sometimes disturbs our comfortable life.
● MAX/MIN measurement. Generally, quiet sound level in everyday life is less
● Display Hold. than 45dB, Comfortable sound level will be around
● Auto Power Off. 40dB to 60dB.
Clamp Meters
OPTIONAL ACCESSORIES
1026 Carrying Case
Advantages of SK-8530
Backlight LCD MAX/MIN measurement Rubber Grip
Easy reading even in the dark places. Display should change as following by Side rubber assures good grip neatly fit in
pressing MAX/MIN Key. your hand.
Display Hold
Freeze the readings by pressing HOLD Key.
Digital Multimeters
MAX DISP
LUX MIN HOLD APO
KG-75
FEATURES
● Lux and Fc (foot-candle) are selectable. Measurement Procedures
● Backlight LCD. ①Press POWER Key and turn the power on.
● Rubber Grip. ②Remove the sensor cap.
● MAX/MIN measurement. ③Hold out the sensor to the object to be measured.
● Display Hold. ④Read the measurement value on LCD.
● Auto Power Off. LCD shows ×10 sign when
Other Testers
OPTIONAL ACCESSORIES
1026 Carrying Case
35
Test Leads
Automotive Testers
Models Test Lead Kit
100-40 Lead Wires
766 Test Pipes
15mm
767 Test Pins
769 L Type Test Pins
790 Test Hook for Dark Current
791 Test Hook for Dark Current
792 Straight Test Pins
942 Alligator Clips
*Red and black parts are contained except for 790 and 791.
Test Pin L Type Test Pin Test Hook Straight Test Pin
Clamp Meters
Connect Test Plugs and Test Pipes of 100-40 Lead Wire, and connect 3 kinds of Test
Pin or 2 kinds of Test Hook.
Alligator Clips
Test Pipes
Max. Voltage : 1000V
Max. Voltage : 1000V
Max. Current : 20A
Max. Current : 10A
Jaw Opening : 20mm
Test Plug of 767 / 769 / 792 Test Pin
100-40 Lead Wires 766 Test Pipes 790 / 791 Test Hook
Applicable Models
Digital Multimeters
Combination of useful components from 100-41. Newly-developed test lead for our
mini-clamp meter series.
Connector + / - integrated connector that can hardly
pulled out during measurement.
Applicable Models
SK-7660 / 7661 / 7602 / 7603 / 7820 / 7825
792R 942B
Analog Multitesters
100-40 766R
Red Straight Black
Lead Wire Red Test Pipe
Test Pin Alligator Clips
Applicable Models
100-74 Ripple Voltage Test Lead
SK-2500
Can view the Ripple Voltage waveform Applicable Models
of the alternator by removing DC SK-2500
elements from the measuring voltage.
Changeable
100-74 Test Lead (Red)
Accessories
B Terminal
alternator
Clips
KU-2600 / 2602 / 1199 KF-32 / 20 *Only red clip is available for SK-3500 / 3502.
*Only red clip is available for SK-3500 / 3502.
37
Mark Descriptions
Measurement Items
Measurement Functions
TRUE True RMS (True root-mean-square value) Auto Power Off Drop Drop Proof
RMS True RMS value. AC current and voltage of APO Proof Anti-shock structure enables to protect the
Power is automatically turned off when a certain
a non-sine wave can be measured by true period of time has elapsed after the power on. tester from the strong shock by the
RMS values. Some models are enabled to cancel this function. 1-meter-dropping-off.
PEAK Peak Hold Low Pass Filter Simple Water Simple Water Resistant
HOLD LPF Frequency signals higher than the specified Resistant Water-Resistant case is used to
The Peak current value in a certain period of
time is measurable and indicates on LCD. cutting-off frequency are intercepted. protect the tester from water damage.
www.kaise.com
70-0201-0000- 7 1703