Professional Documents
Culture Documents
COMPACT BLUMOTION 39C Hinges For Full Overlay: Features Minimum Reveal
COMPACT BLUMOTION 39C Hinges For Full Overlay: Features Minimum Reveal
minimum reveal
Features3/4" door = 7/32"
based on square
edge doors
Door Cabinet
1-1/16"
3/4" 5/16"
3 Ø8
3/8"
3/4"
35
45
1/2"
Ø
1/8"
pilot hole
1/8" overlay
9.5 110°
gap
20.5 13 3/16" factory setting,
adjusts +3/32" -1/32"
Deactivation switch
Hinge attachment
Screw-on Press-in
Use #6 wood screws Pre-attached Ø8 dowels installed with Blum knock-in tool or
MINIPRESS with universal insertion ram
3 (1/8") reveal
Ø8
20.5 (13/16")
80"
45-60
60" lb
30-45
15-30
lb
40" lb
<15 lb
NOTE: The distance between the top and bottom hinges must be 20"
greater than the width of the door
Door adjustment
Three-dimensional adjustment
Side adjustment Height adjustment Depth adjustment
Rotate the front cam screw to increase or Loosen installation screws to adjust door Rotate the rear cam screw to adjust door gap
decrease door overlay (+/- 1/16"). position (+/- 1/8"), then retighten. (+ 3/32", - 1/32").
BLUMOTION deactivation
Switch on the hinge cup
For small or light doors, the BLUMOTION can be deactivated on one Door must be closed once for the deactivation to be complete.
of the hinges. COMPACT BLUMOTION comes in the activated position, To reactivate, move switch back to the original position “I”.
marked with a “I”. The deactivated position is marked with a “0”.