Professional Documents
Culture Documents
Robin Config
Robin Config
>cfg_multiple_language 1 #multi-language(enable:1,
disable:0)
#---------------------------------------------------------------
################# Machine settings ############################
>EXT1_X_OFFSET 0 #E1 offset from the origin of
X axis (mm)
>EXT1_Y_OFFSET 0 #E1 offset from the origin of
Y axis (mm)
>INVERT_X_DIR 0 #X motor direction, 1 goes
opposite direction;
>INVERT_Y_DIR 0 #Y motor direction, 1 goes
opposite direction;
>INVERT_Z_DIR 0 #Z motor direction, 1 goes
opposite direction;
>EXT0_INVERSE 1 #E0motor direction, 1 goes
opposite direction;
>EXT1_INVERSE 0 #E1motor direction, 1 goes
opposite direction;
#---------------------------------------------------------------
################ Delta Settings ##############################
>END_EFFECTOR_HORIZONTAL_OFFSET 28.0 #
>CARRIAGE_HORIZONTAL_OFFSET 14.5 #
>ROD_RADIUS 169 #
#-------------------------------------------------------------
################## Advanced Settings#############################
>cfg_have_ups_device 0 # UPS(1:yes;0:no)
#-------------------------------------------------------------
################# Bed Leveling #############################
#---------------------------------------------------------------
################# Wireless #####################################
#----------------------------------------------------------------
############### Special Setup(default) ######################
>EXT0_HEAT_MANAGER 1 #
>EXT1_HEAT_MANAGER 1 #
#-------------------------------------------------------------
####### Display Effect(refer to MKS TFT datasheet) ###########
#button1~button6 function
>morefunc1_cmd:G28;
>morefunc2_cmd:G28;
>morefunc3_cmd:G28;
>morefunc4_cmd:G28;
>morefunc5_cmd:G28;
>morefunc6_cmd:G28;
#----------------------------------------------------------------
############## Display Customization #######################