Professional Documents
Culture Documents
EXC-series EC700B & C PTO Gear Bearing Housing Improvement - 210 EXC 35K1
EXC-series EC700B & C PTO Gear Bearing Housing Improvement - 210 EXC 35K1
SERVICE BULLETIN
Language Code Group Product No. Version Date Page
GB 210 EXC 35 K 1 2008-05-07 1/1
Applies to models
EC700B LC, EC700C L
WARNING!
Please pay attention to the safety instructions in the Operator's
and Service Manuals concerned.
NOTE! There have been a few cases reported where the PTO gear teeth
The gap “A” between the Bearing and its Housing have become worn due to the bearing moving in its Housing.
must be 0mm but the failed part was measured as
5~10mm. Action
The Snap-rings have been applied to the housing to secure the
bearing position. Refer to Fig. 2.
Part information
Part Number
Part Name
Old New
Bearing Housing VOE 11447003 VOE 11447058