Professional Documents
Culture Documents
R-2E75-S-TP: Electrical Specifications
R-2E75-S-TP: Electrical Specifications
Lamp Type Num. Rated Min. Start Input Input Ballast MAX Power Lamp B.E.F.
of Lamp Temp Current Power Factor THD Factor Current
Lamp Watts (°F/C) (Amps) (Watts) % Crest Factor
s
* F60T12 2 50 0/-18 1.03 111 0.94 30 0.90 1.9 0.85
F64T12 2 52 0/-18 1.07 117 0.95 30 0.91 1.9 0.81
F72T12 2 57 0/-18 1.18 132 0.94 30 0.93 1.8 0.71
F84T12 2 70 50/10 1.28 147 0.95 30 0.96 1.8 0.65
F96T12 2 75 50/10 1.35 156 0.94 30 0.97 1.8 0.60
F96T12/ES 2 60 60/16 1.10 126 0.88 35 0.95 1.9 0.70
LAMP
BLACK BLUE H
WHITE
BALLAST RED
W M
LINE LAMP L
CUTOUT LAMPHOLDER
CASE "R"
Diag. 12
The wiring diagram that appears above is
for the lamp type denoted by the asterisk (*)
Enclosure Dimensions
OverAll (L) Width (W) Height (H) Mounting (M)
Standard Lead Length (inches)
11.75 " 3.109375 " 1.78125 " 11.14062 "
in. cm. in. cm. 11 3/4 3 7/64 1 25/32 11 9/64
Black 70 Yellow/Blue 29.8 cm 7.9 cm 4.5 cm 28.3 cm
White 70 Blue/White
Blue 46 Brown
Red 46 Orange
Yellow Orange/Black
Gray Black/White
Violet Red/White
Revised 08/01/2002
Data is based upon tests performed by Advance Transformer in a controlled environment and representative of relative performance. Actual performance
can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
ADVANCE
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: 800-372-3331 · Fax: 630-307-3071
Corporate Offices: Phone: 800-322-2086