Professional Documents
Culture Documents
Cree Xlamp Xm-l2 Leds: Product Family Data Sheet
Cree Xlamp Xm-l2 Leds: Product Family Data Sheet
Cree Xlamp Xm-l2 Leds: Product Family Data Sheet
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, Cree, Inc.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo and XLamp® are registered trademarks of Cree, Inc. 4600 Silicon Drive
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
xlamp xm-l2 leds
The following table provides several base order codes for XLamp XM-L2 LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well
as a complete description of the order-code nomenclature, please consult the XLamp XM-L Family Binning and Labeling
document.
Cool White 5000 K 8300 K T6 280 318 385 541 679 XMLBWT-00-0000-0000T6051
85-CRI White 2600 K 3200 K S5 172 196 236 332 417 XMLBWT-00-0000-000PS50E7
90-CRI White 2600 K 3200 K S5 172 196 236 332 417 XMLBWT-00-0000-000US50E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ±2 on CRI measurements.
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 1000 mA, 1500 mA and 2000 mA are for reference only.
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
2
xlamp xm-l2 leds
Characteristics
Reverse voltage V -5
100
Relative Radiant Power (%)
80
20
0
380 430 480 530 580 630 680 730 780
Wavelength (nm)
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
3
xlamp xm-l2 leds
Relative Flux Output vs. Junction Temperature
120
Relative Luminous Flux (%)
100
80
60
40
20
0
25 50 75 100 125 150
3000
2800
2600
2400
Forward Current (mA)
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
2.60 2.80 3.00 3.20 3.40
Forward Voltage (V)
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
4
xlamp xm-l2 leds
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
Thermal Design
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
Cool White
ambient in order to optimize lamp life and optical characteristics.
3500
3000
Maximum Current (mA)
2500
2000
1500
Rj-a = 4°C/W
1000
Rj-a = 7°C/W
Rj-a = 10°C/W
500
Rj-a = 15°C/W
0
0 25 50 75 100 125 150
350
Relative Luminous Flux (%)
300
250
200
150
100
50
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA)
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
5
xlamp xm-l2 leds
Relative Chromaticity Vs. Current, WW
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
0 500 1000 1500 2000 2500 3000
Current (mA)
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
25 50 75 100 125 150
Tsp (°C)
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
6
xlamp xm-l2 leds
100
Relative Luminous Intensity (%)
80
60
40
20
0
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
7
xlamp xm-l2 leds
In testing, Cree has found XLamp XM-L2 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Time Within 5 °C of Actual Peak Temperature (tp) 10-30 seconds 20-40 seconds
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
8
xlamp xm-l2 leds
Notes
Lumen Maintenance Projections
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/xlamp_app_notes/LM80_results.
Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_
maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal
Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal
design, ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
In testing, Cree has found XLamp XM-L2 LEDs to have unlimited floor life in conditions ≤30 ºC/85% relative humidity
(RH). Moisture testing included a 168‑hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical
inspections at each stage.
Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree
also recommends returning any unused LEDs to the resealable moisture‑barrier bag and closing the bag immediately
after use.
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
9
4.78
R2.26
Mechanical Dimensions
4.7
3.9
.600
6 5 4 B 3 2
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION Anode REV DESCRIPTION
CONTAINED WITHIN ARE THE PROPRIETARY AND
6 5 OF CREE, INC. THIS PLOT
CONFIDENTIAL INFORMATION 4 3 2 1
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
B ADDED DOME RA
NOTICE REVISONS
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
.400
CREE CONFIDENTIAL. THIS PLOT AND THE OF
INFORMATION
CREE INC. 4.7 REV DESCRIPTION BY DATE APP'D
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
A INITIAL RELEASE DC 11/14/12
D
3.02 3.78
5.000 3.02 2.78
.50 2.78
.73
.400 5.00 0.73 .50
.400
DRAWN BY DATE
UNLESS OTHERWISE SPECIFIED
RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN D. CRONIN 11/14/12 4600 Silicon Drive
Durham, N.C 27703
SHADED AREA IS OPEN MILLIMETERS AND AFTER FINISH. CHECK DATE
Phone (919) 313-5300
TOLERANCE UNLESS SPECIFIED: -- -- Fax (919) 313-5558
.XX ± .25 APPROVED DATE A
.XXX ± .125 TITLE
X° ± .5 ° -- --
5.000
THIRD ANGLE PROJECTION OUTLINE DRAWING, 5050 XMLB 4.78
5.00 FOR SHEET METAL PARTS ONLY MATERIAL
4.78
.X ± 1.5
.XX ± .75 -- SIZE DRAWING NO. REV.
.XXX ±
Anode
X° ±
.25
.5 °
FINAL PROTECTIVE FINISH
C 2610-00032 A
SURFACE FINISH: 1.6 -- SCALE
16.000
SHEET OF
1 /1
4 3 2 1
C
R2.190
R2.26
4.7
4.8
3.9
3.8
4.7
4.8 .500 .600
3.9
3.8
.500 .600
.500 .400
2.782
.400
.500 .400 .400 DRAWN BY DATE
UNLESS OTHERWISE SPECIFIED
2.782
A RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN D. CRONIN 08/1/11
.400
Recommended PCB Solder Pad Recommended Stencil Pattern SHADED AREA IS OPEN MILLIMETERS AND AFTER FINISH. CHECK DATE
6 5 4 3 2 1
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
10
6 5 4 3 2 1
NOTICE REVISIONS
EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
NTAINED WITHIN ARE THE PROPRIETARY AND REV DESCRIPTION BY DATE APP'D
NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
POCKET SIZE
xlamp xm-l2 leds
CREE INC.
Ao - 5.40mm [.213"] D
2.00[.079] +.10 +.0039
P2
Do1.50
-.00
.0591
-.0000 [ ] Bo - 5.40mm [.213"]
1.75[.069]
Ko - 3.35mm [.132"]
4.00[.157]
Po E1
POCKET SIZE
CONFIDENTIAL INC. THIS
UNAUTHORIZED PERSON
[.404]
WITHOUT MAX
THE WRITTEN
MAY NOT BE COPIED, REPRODUCED CONSENT
OR DISCLOSED TO ANY
OF CREE INC.
UNAUTHORIZED
OF CREE INC.
PERSON WITHOUT THE WRITTEN CONSENT
E2 W POCKET
All dimensionsSIZE in mm.
D AoAo
- - 5.40mm [.213"]
5.40mm [.213"] D
D +.10 +.0039 D
2.00[.079]
2.00[.079]
P2
Do1.50
Do1.50
.0591
-.00 +.10 .0591 +.0039
-.0000 [] BoBo
- - 5.40mm [.213"]
5.40mm [.213"]
P2 -.00 -.0000 [ ]
1.50[.059]
1.75[.069]
KoKo
- - 3.35mm [.132"]
3.35mm [.132"]
D1 4.00[.157] .36[.014]
8.00[.315] 4.00[.157] E1 1.75[.069]
Po T
P Po E1
3.0° 5.40[.213]
B 3.0° 5.40[.213]
Bo
Bo
7.0° 12.00[.472]
6 5 4 3 5.50[.217]F 2 12.00[.472]
NOMINAL 1
C 5.50[.217]F C
NOTICE C NOMINAL
REVISONS C
NTIAL. THIS PLOT AND THE INFORMATION
THIN ARE THE PROPRIETARY AND
REV
10.25 12.30DESCRIPTION
[.484] BY DATE APP'D
3.35[.132] 12.30 [.484]
INFORMATION OF CREE, INC. THIS PLOT A [.404]10.25 MAX
Loaded pocket count was 750 DDS 11/8/10 BS
OPIED, REPRODUCED OR DISCLOSED TO ANY Ko [.404] MAX
WANODE
B E2
MADE CATHODE AND DC
W NOTE LARGER 2/26/12
D PERSON WITHOUTTHE WRITTEN CONSENT
E2
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
5.40[.213]
Ao UNLESS OTHERWISE SPECIFIED
DRAWN BY DATE
D Trailer Loaded Pockets Leader THIRD ANGLE PROJECTIONFOR SHEET METAL ONLY MATERIAL
FOR.XSHEET
± METAL .06 PARTS ONLY
160mm (min) of (1000 Lamps) 400mm (min.) of .XX .X ± ±.03 .06 SIZE DRAWING NO. REV.
D
empty pockets empty pockets with
at least 100mm
.XXX .XX
X°
± ±
.010 .03
±.XXX .5± ° .010
FINAL PROTECTIVE FINISH
FINAL PROTECTIVE FINISH
SIZE DRAWING NO.
A 2402-00011
A 2402-00011 A
REV.
A
sealed with tape X° ± .5 ° SCALE SHEET OF
12.4
+.2 C
.0
C MEASURED AT HUB
330
+.25 16.4
-.75 +0.2
1.9±.4
.0
MEASURED AT HUB
DRAWN BY DATE
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN D. CRONIN 06/08/10 4600 Silicon Drive 21 ±.4
Durham, N.C 27703
MILLIMETERS AND AFTER FINISH. CHECK DATE
Phone (919) 313-5300
TOLERANCE UNLESS SPECIFIED: -- -- Fax (919) 313-5558
.XX ± .25 APPROVED DATE A
.XXX ± .125 TITLE
.XXX ±
X° ±
.25
.5 °
FINAL PROTECTIVE FINISH
C 2402-00012 B B
SURFACE FINISH: 1.6 -- SCALE
3.000
SHEET OF
1 /1
6 B 5 4 3 2 1
12.4
+1.0
-.5
MEASURED AT EDGE
60° 60°
REVISONS
11
Phone (919) 313-5300
TOLERANCE UNLESS SPECIFIED: -- -- Fax (919) 313-5558
.XX ± .01 APPROVED DATE A
.XXX ± .005 TITLE
X° ± .5 ° -- --
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY MATERIAL REEL, 13" X 12MM, 3 PIECE SNAP
xlamp xm-l2 leds
Unpackaged Reel
Patent Label
Copyright © 2012
2010 Cree,
Cree, Inc.
Inc. All
All rights
rights reserved.
reserved.The
Theinformation
informationininthis
thisdocument
documentisissubject
subjecttotochange
changewithout
withoutnotice.
notice.Cree , the
Cree,
®
the Cree
Creelogo
logoand
andXLamp
XLamp® are registered trademarks
of Cree, Inc.
12