The inspection found no defects in the EAF-1-Portal joint and determined it to be satisfactory based on the ASME SEC-III, Div-1 acceptance criteria. Normal probe scanning techniques were used to inspect the full length plus half the weld width of the joint. The test was performed by Industrial Engineering Services and witnessed by representatives from BHEL, TIPL, FICHTNER/BIFPCL.
The inspection found no defects in the EAF-1-Portal joint and determined it to be satisfactory based on the ASME SEC-III, Div-1 acceptance criteria. Normal probe scanning techniques were used to inspect the full length plus half the weld width of the joint. The test was performed by Industrial Engineering Services and witnessed by representatives from BHEL, TIPL, FICHTNER/BIFPCL.
The inspection found no defects in the EAF-1-Portal joint and determined it to be satisfactory based on the ASME SEC-III, Div-1 acceptance criteria. Normal probe scanning techniques were used to inspect the full length plus half the weld width of the joint. The test was performed by Industrial Engineering Services and witnessed by representatives from BHEL, TIPL, FICHTNER/BIFPCL.