Professional Documents
Culture Documents
Drilling Unit Details: PR-02 Drilling Rig Description
Drilling Unit Details: PR-02 Drilling Rig Description
Drilling Unit Details: PR-02 Drilling Rig Description
1000H.P Rig MR -8000 Trailer mounted, capable to drill vertical or deviated oil/gas wells to 8000 FT, BOP–5,000 Psi, Top Drive–
Drill Mec HTD 250 Tons- hydraulic type, 5” Drill pipe and 3-1/2” DP, Pumping capacity of 650 x 2 Gallon/min for surface hole
down. The Drilling Unit and all associated Equipment including, but not limited to the Camp, shall meet or exceed the operating and
environmental regulations of the specifications and requirements set out by ASTM, API (latest editions) and any other relevant
industry standard.
Page 1
Item Description of Equipment Rig 2
Air winch with spooling device –make & type BREVINI WINCHES -type BWC3000 +,HYD Dayton type HY3VJ75
Air winch rated pull (mT) air 3.5 ton + hyd 11000 lbs (5 Ton)
Air winch position Rig Floor
Sub-Structure
Make and type DRILL MEC ST -17-335
Dimensions (m) 17 ft x 93 ft x 39 ft
Rig floor height (m) 17 ft (5.18m)
Clear height beneath rotary beams 13.8 ft
Nominal height (m) 17 ft (5.18m)
Simultaneous setback capacity (Ib) 220,000 lbs
Simultaneous casing (rotary) capacity (Ib) 440,000 lbs
Combined casing and setback capacity (Ib) 660,000 lbs
Matting boards yes
Accessories yes
Air tanks 2,000 lt , 12 Bar
BOP handling system N/A
BOP handling system load capacity (Ib) N/A
Air winch mounted in wellhead area yes
Air winch rated pull (Ib) 3.5 ton (7,000lb)
Air winch position rig floor
Height underneath rotary beams (m) 13.8ft ( 4.2m)
Catwalk length (m) 50ft ( 15.24m)
Travelling Assembly
Block make and type DRILL MEC DH30E250
Rated capacity (lb) 440,000 lbs
Hook make and type DRILL MEC DH30E250
Rated capacity (lb) 440,000 lbs
Swivel make and type* DH30E250
Swivel pressure rating (psi) 5,000 PSI
Rated capacity (lb) 440,000 lbs
Top Drive
Manufacturer HTD 250-005 A , DRILLMEC MR-8000
Type
Rated capacity (lb) 440,000 lbs (220 ton)
Drive type CAT C-15
Input Power rating (hp) 397HP , 293 KW
Maximum torque (ftlb) 30,000lb.ft
Page 2
Item Description of Equipment Rig 2
Page 3
Item Description of Equipment Rig 2
Page 4
Item Description of Equipment Rig 2
Number of cones 2 Ea
Cone size (in) 10 inch
Feed pump make (fully assigned) USA
Feed pump type Mission
Feed pump drive Electric Motor 75 HP
Suction from Shale Shaker Tank
Discharge to Desander Tank
Desliter
Make and type swaco , combind desilter&desander&mud cleaner
Number of cones 12
Cone size (in) 4"
Feed pump make (fully assigned) USA
Feed pump type Mission
Feed pump drive Electric Motor 75 HP
Suction from desander Tank
Discharge to desilter Tank
Mud Cleaner
Make and type swaco , combind desilter&desander&mud cleaner
Mud Tanks
Total capacity excluding sandtraps (bbl) 1800 BBL
Total number of mud tanks including sandtraps 6 Tanks
Active capacity (bbl) Including settling tanks and
1400 bbl
sandtraps
Number of active tanks 3 Ea
Reserve mud capacity (bbl) 300 bbl
Number of reserve tanks 1 Ea
Chemical Mixing capacity (bbl) 1 ea x 100 bbl
Trip tank (API) 50 bbl
Number of chemical mixing tanks 1 Ea+ mixing reverse tank
Number of pill tanks 1 Ea
Pill capacity (bbl) 100 bbl
Extra details
A 2" water supply line are installed on all mixing and
yes
suction tanks
Mud tanks are suitably covered with gratings to avoid
yes
accidents
Overflows are fitted between active pits yes
Mud tanks are equipped with mud agitators yes
Dump valves 12" yes
All electric motors and panels in the mud tanks area yes
Trip Tank
Capacity (bbl) 50 bbl
Fill method Centrifugal Pump
Pump type Mission
Level indicator type Mechanical
Tank position relative to flowline & bell nipple part of rig mud system
Water Tanks
Number of drill water tanks 2 Ea
Capacity (bbl) 350 BBL
Number of drinking water tanks 2 Ea ( one in site camp & one in Main Camp
Capacity (bbl) 200 bbl , 400bbl )
Number of water pumps 2 Ea
Water pump type and size Mission
Line size (in) 3"
Page 5
Item Description of Equipment Rig 2
Cellar Pump
Number 1 Ea
Type/capacity (gpm) (electric submersible) Mission-centrifugal Pump 2x3x13-1000gpm
Mud Agitators
Number One (1) per compartment plus two (2) spares
Type swaco or equivalent
Motor (hp) 20: 15 HP
Casing Fill-up Line
Make and type used hoses of rig , 1 ea 2" Hose 30 ft x 5,000 PSI
OD (in) 2"
Location Trip Tank
Well Fill-up Line
Make and type used hoses of rig , 1 ea 2" Hose 30 ft x 5,000 PSI
OD (in) 2"
Location Trip Tank
Controls
Other Mud Equipment
Centrifugal pump(s) and lines to allow pumping mix water
yes ,use facilities of mud system
to cement unit
Mud Bucket One (1) for 5" & 3-1/2" DP
Mud saver Valves IBOP
Power Plant
Prime Movers POWER Engines For C ompound
Number of diesel engines 9ea
Page 6
Item Description of Equipment Rig 2
Diverter System
29 1/2" Diverter system is rated to 500 psi with 12"
N/A
valves side outlets
21-1/4" BOP Stack N/A
13.5/8" BOP Stack
General description of 13-5/8" One 13-5/8" BOP stack,5,000 WP suitable for H2S service
Annular make and size (in) Hydril, Size 13-5/8"
Annular ID (in) 13-5/8"
Annular working pressure (psi) 5K psi 5000 psi
Top connection with ring gasket yes
Bottom connection with ring gasket yes
Annular element elastomer type Hydril
Date of last repair or re-manufacture 2012
Ram preventer make and type (in) CAMERON type U , Double Ram
Ram preventer body size (in) Size 13-5/8"
Ram preventer working pressure (psi) 5000 PSI
Ram preventer ID (in) 13-5/8"
Top connection with ring gasket yes
Bottom connection with ring gasket yes
include one 13 3/8" - 9.5/8” casing ram, 1 set of 7" , 1 sets pipe
Ram sizes (in) rams 5" & 1 sets pipe rams 3-1/2" ,1 set blind ram ,1 set VBR, RAM
BLOCK 2 7/8" - 5" , 1 set VBR, RAM BLOCK 3-1/2 - 13-9-5/8"
Ram packers and seals elastomer type Cameron, Suitable for 300 deg F and oil base mud
Ram lock type hydraulic
Ram preventers fitted with extension hand wheels yes
All components suitable for H2S service yes
Date of last repair or re-manufacture 2012
Stack-up drawing to be included yes attached in end of this appendix
Drilling Spools
The well head configuration is to be confirmed to match with client requirements
Accumulator Unit
Make CAD or equivalent
Type CAD or equivalent
Hydraulic fluid reservoir capacity (gal) (250 gal)
Hydraulic fluid type AW 46 Hyd oil
Number of bottles 16 each 11 Gallons Bottles
Precharge pressure (psi) 1000 PSI
Usable fluid capacity at 3000 psi (gal) 49 gallons
Time to close any ram preventer (sec) 30 Second
Time to close annular preventer (sec) 45 Second
BOP Control System
Charge pump type One (2) air pump + One(1) electrical pump Triplex
Charge pump capacity (gpm and psi) 3.2 gal 1 min & 6-25 gal 1 min
Charge time from precharge to 3000 psi (mins) 13 min
Charge pump power source air & electric source
Main panel location in accumulator unit
Main panel alarms N/A
Remote panel location 1 Ea on Rig Floor & 1 Panel at Toolpusher office
Choke Manifold
Minimum bore (in) 3-1/16"
Rated working pressure (psi) 5,000 PSI
Date of last wall thickness check 2012
Date of last repair or re-manufacture 2012
Page 7
Item Description of Equipment Rig 2
Page 8
Item Description of Equipment Rig 2
Page 9
Item Description of Equipment Rig 2
Page 10
Sizes (in) 7": 16"
Type HT-65
Pipe Spinner
Page 11
Item Description of Equipment Rig 2
Quantity 1
Make HWACK
Type hydrolic
Size (in) 3-1/2" , 5"
Iron Roughneck
Make N/A
Lifting and Handling Subs
Drill collars - for all sizes provided Yes
Quantity 3 Ea F / Each Size
Size 6-5/8" Reg & 4-1/2" IF & 3-1/2" If Theards
Bit Breakers
Sizes to fit 26and Rock , Bit
, 18.1/2 and, Stabiliser
17.1/2 12.1/4 , 12 Gauges
, 8.1/2 , Yes
" Yes
Bit breaker sizes (in) Sizes to fit 17.1/2", 12.1/4 ", 12”, 8.1/2 ", 6"
Bit gauge sizes - go/no-go gauges (in) Sizes to fit 17.1/2", 12.1/4 ", 12”, 8.1/2 ", 6"
Stabilizer gauge sizes - three point gauges (in) N/A
Mud Saver Buckets
For all drill pipe sizes provided - must be equipped with
Yes
hose to flowline and spare rubber sets
Pipe Wipers
For all drill pipe sizes provided. Yes
Size (in) 5" & 3-1/2"
Cable Cutter
Quantity 1 Ea
Make MODEL CAPAC or Equvalent
Type Hydrulic
Cable sizes (in) 2 - 1.1/8"
Air Winches
Air winch with spooling device – number 2 Ea
Air winch make and type Ingersoll - Rand, Type IR 5KUL
Air winch rated pull (lb) 3 & 5 MT
Air winch position Based on Rig Floor
Circulating Heads and Water Bushings
Number 1 Ea ciculating head
Make Drillco
Type
Connection (top and bottom) 2" Weco Fig 1502 , 4 1/2if , 3 1/2 if
Rated working pressure (psi) 5000 PSI
Casing scrapers
9 5/8” and 7” casing scraper N/A
Drilling String and Associated Equipment
a full detail history and state of the drillpipe,
Total inventory is attached
drillcollars and subs
Drillpipe Specifications
Size – 5” 5"
Grade G-105
Weight (lb/ft) 19.5 lb/ft
Class Premium
Range Range II
Internal coating PDC
Hard banding aranco -300
Connection NC-50, 4-1/2" IF
Length 133 JT G 105 + 20JT S135
Size – 3.1/2” 3-1/2"
Page 11
Item Description of Equipment Rig 2
Grade G-105
Weight (lb/ft) 13.3 lb/ft
Class Premium
Range Range II
Internal coating PDC
Hard banding (smooth) aranco -300
Connection NC38, 3-1/2" IF
Length 34JT
Size – 2.3/8” N/A
Grade
Drillpipe Pup Joints
Size - 5" YES
Grade G-105
Weight (lb/ft) 19.5 lb/ft
Class Premium only
Length 15 Ft & 10 Ft & 5 Ft
Internal coating PDC
Hard banding (smooth) aranco -300
Connection NC-50, 4-1/2" IF
Number 3
Size - 3 1/2" YES
Grade G-105
Weight (lb/ft) 13.3 lb/ft
Class Premium only
Length 15 Ft & 10 Ft & 5 Ft
Internal coating PDC
Hard banding (smooth) aranco -300
Connection 3-1/2" IF, NC38
Number N/A
Size - 2 3/8" N/A
Heavyweight Drillpipe
Size - 5" HWDP (in) 5"
Weight (lb/ft) 50 lb/ft
Range 2
Class Premium
Hard banding (smooth) aranco -300
Connection 4-1/2" IF
Number 20
Size – 3.1/2" HWDP (in) N/A
Drill Collars
Size - 8" x 2.13/16" (in) or 8 ½” x 2.13/16” Yes
Connection 6-5/8" Reg
Body type Spiral
Number 12
Short drill collar length (ft) and number N/A
Size - 6.1/2" x 2.1/4" (in) Yes
Connection 4-1/2" IF
Body type Spiral
Number 12
Short drill collar length (ft) and number N/A
Size - 4 3/4" x 2" (in) Yes
Connection - 3-1/2" IF
Body type - Spiral
Page 12
Item Description of Equipment Rig 2
Number - 12
Size – 3.1/8" x 1.1/4” (in) N/A
Connection -
Body type -
Number -
Crossover Subs
Crossover subs for each piece of TENDERER's
to connect between contractor equipment
equipment
Size (in) Sufficient to Connect between all Drill String Connection
Length (ft) 4 FT
Connection available to all different Threads
Bits Subs
Item Bits Subs available for Bits Size 17-1/2" & 12-1/4" & 8"
Bit subs to be bored for Baker type floats Yes
Size (in) 8-1/4" & 6-1/2" & 4-3/4"
Length (ft) 4 Ft
Connection 6-5/8" Reg & 4-1/2" IF & 3-1/2" IF
Drillpipe / Casing Protectors
5" protector present with drill pipe , casing protector with service
For 5”
company
Quantity
Type
Recording and Indicating Equipment
Driller’s control unit
Make and model of unit MI Swaco
Mud Shack
Quantity 1
Size and location relative to mud pits behind mud engineer room
Intrinsically safe electrical supply with all sockets and
yes
plugs safe for area and
Air Conditioning unit yes
Water supply yes
Sink yes
120 psi air supply yes
Marsh Funnel Viscometer yes
Desk, chair and filing cabinet yes
Stainless Steel Work Table yes
Adequate number of light sockets and proper lighting
yes
plus desk lamp
Storage space for chemicals, paperwork etc. yes
Mud Weight Balance yes
Deviation Surveying Equipment
Number 1 Set
Make and type Totco
Range 0 -8 & 0-16 Degree
Baffle plate (Crows foot) to suit all drill collars Yes
Retrieving tools to recover recorder in any of the
Yes
TENDERER's tubulars
Fishing Tools
BOWEN, OVER SHOT, 11-1/4"OD series 150 spiral grapple complete
with 8", 6-1/4" & 5" baskets.
Overshots
BOWEN, OVER SHOT, 5-3/4"OD series 150 spiral grapple complete
with 4-3/4" & 3-1/2" baskets.
BOWEN Bumper Sub, 6 1/4” OD.
Bumper Subs
Bowen Bumper Sub, 4-3/4" OD.
Junk Subs 8" & 6-1/4"
Auxiliary Equipment for the Rig
Page 13
Item Description of Equipment Rig 2
Page 14
Item Description of Equipment Rig 2
Page 15
Item Description of Equipment Rig 2
Page 16