Professional Documents
Culture Documents
Automatic Voltage Regulator - r448
Automatic Voltage Regulator - r448
R E G U L A T O R
AUTOMATIC VOLTAGE
REGULATOR — R448
The R448 Automatic Voltage Regulator (AVR) is
an advanced electronic component that provides
closed loop control of the generator output
voltage. The R448 AVR is fitted as standard on
the following generators:
● 5000 Series Generators
● 6000 Series Generators
● 7000 Series Generators
Voltage
V/Hz
(without LAM)
400 or 480
V/Hz
48 Hz 50 Hz
or or
Frequency
57.5 Hz 60 Hz
W H E R E T H E W O R L D T U R N S F O R P O W E R
A U T O M A T I C V O L T A G E
R E G U L A T O R
ADJUSTMENT CAPABILITY
● Potentiometer P1 — Quadrature Droop
Adjustment
● Potentiometer P2 — Voltage Adjustment
● Potentiometer P3 — Stability Adjustment
● Potentiometer P4 — Underspeed/LAM
Threshold Adjustment
● Potentiometer P5 — Excitation ceiling
● Link ST1 — Link IN for single phase voltage
detection (standard)
● Link ST2 — Link IN for Normal response time
or CUT for Rapid response time
● Strap ST3 — Strap between middle and
left terminal for 50 Hz or between middle
and right terminal for 60 Hz
● Strap ST4 — Strap IN for no remote voltage
adjustment or OUT and potentiometer
(470, 0.5W min., adjustment range ±5%)
connected to the terminals for remote voltage
adjustment
● Link ST5 — Link IN for LAM or CUT to
disable LAM
● Link ST9 — Link IN for shunt and AREP or CUT
for PMG
www.CAT-ElectricPower.com
© 2004 Caterpillar
All rights reserved.
Printed in U.S.A.
LEHE4648 (3-04) Materials and specifications are subject to change without notice.
The International System of Units (SI) is used in this publication.