Professional Documents
Culture Documents
Add & Activate - en
Add & Activate - en
Please use the ENGINE 2 DVD to install ENGINE 2 before you add the library.
Simply launch the installer suitable for your operating system and follow the onscreen instructions.
Now copy the library folder from the DVD into the “YOUR DISK/YELLOW TOOLS/LIBRARIES” folder.
You’re done! The library will now automatically appear in Engine 2 on its next start.
To read the ENGINE 2 manual, click on the question mark right beside the “Preferences” button.
To start the activation process, please load an instrument from your freshly installed library. You will now be prompted
with a request to activate. After clicking ok, the E-License Manager will pop up and display your Product Code.
Now login to the www.yellowtools.com website (please register if necessary) and click on "Products" on the left
hand side. If your product does not appear in your registered product list, it would now be a good time to register it.
Please click on Activate right beside the instrument you want to activate and copy the Product Code from your
E-License Manager to the input fields on the website. Click on “Get Response Code” when done.
Please copy and paste the Response Code back into the E-License Manager. Now please click on Activate.
Activation will now be completed and you should be able to reload the instrument with full access.
The E-License Manger will generate a NEW PRODUCT CODE every time it is launched and a previous instrument
activation has not been completed. So it may prove very useful to save the submitted Product Code on your
computer. An email with your Product Code and your Response Code will be sent to you as well. Should you ever
need to reactivate your library, you can use this Product Code with its corresponding Response Code on the very
same machine whenever you like. Simply re-enter both of them in the E-License Manager.