WEIL
Dry Well Pumps
Index
Vertical and Horizontal Mount Page I of |
Arranged by Motor Type then Discharge Size
Discharge 11501750 3450
Model_| Size _T: RPM RPM RPM
4 7 Semi-Open
2si6_| 4 ANSI 4 ANSI 3. v 9 Enclosed SUBS -=
22 [2 ANSI? ANSI H SEnelosed NEMA -- ~~
aesz | 2 ANSE 030 NPT Grinder 7 Semi-Open NEMA -- 112 712
zs2 | 2 NPT 2 NPT 112 3 Vortex = NEMA s+ ws 3
2g | 3) ANSI 3 ANSI Slicer. = -V,H 7 ‘Semi-Open NEMA
2ss | 3 ANS) «3 ANSI «12,7 Enclosed NEMA.
2857 | 30 ANSE. «4 ANSE. 344 V,H 7) Enclosed NEMA
2est | 3 ANSI 3 ANSI 21/2 -V\H_— 7 SemisOpen NEMA.
236 | 4 ANSI 4 ANSI Slicer. = V,H 7 Semi-Open NEMA
oes | 4 ANSI 4 ANSI Slicer V9 —_Eclosed NEMA.
2663 | 4 ANSI. 4 ANSI 1/6. V,H 9 Enclosed NEMA
2ess_ | 4 ANS] 4 ANSI 212 Vs 7_—_SemisOpen NEMA
2m | 4 ANSI 4 ANS! 212 -V,H 13 Enclosed NEMA
oes | 4 ANSI 4 ANSI 3 ViH 9 Enclosed NEMA
2eme_| 4 ANSI 4 ANSI 3 ViH_ 13 Enclosed NEMA
= Horizontal Mount
= Vertical Mont
Horizontal and vertical dry well pumps are designed to be
installed in a dry area adjacent to, and taking its suction from
a wet collection well,
Dry well pumps are used with above ground wet storage
tanks. Install with a valve on the suction side, and a valve
and check-valve on the discharge side. A compact, easy-to-
install and maintain pump arrangement is possible.
Models 2814, 2815 and 2816 models are matched to a Weil
double-sealed submersible motor. This style of pump is used
in locations where flooding of a dry well may occur.
Horizontal Mount
NEMA Motor
Select vertical mount floor elbow based on suction size:
[Suction Size | Order Number
3 Inch 2800K1001
Finch 280K 1002
Elbows are ANSI flanged 90° with foot mounting
x SG-Drywell
/
At \ ‘
- \
WA TA
Vertical Mount Vertical Mount
NEMA Motor Submersible Motor
ANSI American National Standard Institute 125# flange
connection. Provided with flange holes for bolts.
NPT National Pipe Taper. Discharge has an internal
threaded connection suitable for threaded pipe.
Dry Well
JANUARY 15, 2017 Index