Professional Documents
Culture Documents
Interior: Group 52A
Interior: Group 52A
GROUP 52A
INTERIOR
CONTENTS
SEAT . . . . . . . . . . . . . . . . . . . . . . . . . 52A-5
FRONT SEAT . . . . . . . . . . . . . . . . . . . . . . . 52A-5
REAR SEAT . . . . . . . . . . . . . . . . . . . . . . . . 52A-6
52A-2 INTERIOR
GENERAL INFORMATION
GENERAL INFORMATION
M2520000100247
GLOVE BOX
REAR SEAT ASHTRAY FRONT SEAT ASHTRAY
CUP HOLDER
AC210431AB
The instrument panel and the floor console have the • A pad incorporating the front passenger’s air bag
following features. door has improved appearance.
• The center panel in the instrument panel has a • A cup holder has been installed to the rear floor
new design. console.
• Tilted center panel. • Ashtrays are in the front and the rear console.
• The center panel uses titanium color paint. • Nonflammable materials are used for the instru-
• Center panel box convenient for storing accesso- ment panel and the floor console. Also, material
ries. codes are indicated.
52A-4 INTERIOR
ACCESSORIES
ACCESSORIES
M2520002000105
SUNGLASSES POCKET
MAP LAMP
TICKET HOLDER,
VANITY MIRROR WITH LID
AC211396 AB
RECLINING ADJUSTMENT
AC210102AB
SLIDING ADJUSTMENT
High-back sport type RECARO seat is used for the • Adjustments for both reclining and sliding are
front seat. The front seats offer the following advan- step-free to allow occupants to adjust the seats to
tages: achieve the best posture for driving.
• The fabric for the main cushion section uses an
embossed knit in a sporty mesh design. The side
sections are finished in a suede type material.
52A-6 INTERIOR
SEAT
REAR SEAT
M2520007000111
CUP HOLDER
ARMREST AC209729 AB
A high-back bench seat is used for rear seat. The • An upper tether anchor has been installed on the
rear seat offer the following advantages: rear shelf trim, and an ISO-FIX child seat fixing
• The center armrest has a cup holder. bar has been installed on the body side.
INTERIOR
SEAT BELT
52A-7
SEAT BELT
M2520010000111
ELR 3-POINT
SEAT BELT
SEAT BELT RETRACTOR
OPERATION
1. If a collision energy is transmitted to the seat belt, the ELR
mechanism will operate to lock the seat belt.
2. If the energy increases to a predetermined value, the torsion
TORSION BAR bar will be distorted. As the spindle rotates together with the
BELT
torsion bar, the seat belt webbing is pulled out, reducing the
impact to the occupants.
SPINDLE
AC100083 AB
INTERIOR
TRIMS
52A-9
TRIMS
INTERIOR TRIMS
M2520012000098
• The interiors are fully covered by trims. • Nonflammable materials are used for the trims.
• The energy absorption rib molding located in the Also, material codes are indicated, for recycling.
back side of the front pillar trim and the rear pillar
trim protect head from side impacts and the resin
materials for the trims are unbreakable materials.
52A-10 INTERIOR
TRIMS
DOOR TRIM
M2520012300077
DOOR POCKET
AC210219AB
• A hard resin material is used for door trim to pro- • Cloth covers part of door trim.
tect passengers in the event of a side collision • A large door pocket is used for the front door trim.
and improve safety.