Professional Documents
Culture Documents
Multi Split (60Hz, R22)
Multi Split (60Hz, R22)
(60Hz)
LM60 2004-A1
General Description
Thank you very much for your special patronage of LG air conditioners.
LG's "Multi Split” is meant for high end split applications. As name signifies, with a single outdoor we can either
connect same kinds of indoor units.
This system is most suitable where we have many rooms or halls, such as restaurants, concert halls and hotels.
Thus using single outdoor for various indoor units, we can save lots of space as compared to single split instal-
lation.
Although initial & running cost is less, yet it also offers more technically advanced system.
The capacity ranges from 17k Btu/h to 48k Btu/h and we can connect up to 3 indoor units to a single outdoor.
Each indoor unit encloses its standard and common features. Thus we have choice of indoor units as per needs
like for living room, Study room, Kitchen in our house. Similar pattern can be obtained in other places like
Hotels or Schools etc.
A lot of information regarding the design & installation of this system is provided in this publication. This new
products series contains data on the same pattern.
Please utilize all the information for conducting your business efficiently. Make sure the specification, dimension
or others technical data are same as provided in enginering data book
before you start the project.
LG Electronics Inc.
Air Conditioning Division
TABLE OF CONTENTS
Table of contents Page
2 LM-2421C2L
LM-2423C2G
LM-2424A2G
R22
LM-3620C2L
10.6 36k
LM-3622A2L
LM-3625C3L
10.6 36k
3 LM-3626A3L
LM-4820C3L/A3L
14.1 48k
LM-4822C3L/A3L
L M - 2 3 2 0 C 2 L
Unit Type
L : Wall Mounted, L Look G : Wall Mounted G Look
No of Indoor Units
2 : 2 Indoor Units 3 : 3 Indoor Units
Model Type
C : Cooling Only A : Cooling Only + Gold Fin
H : Heat Pump
Development Sequence
L 2 - C 1 7 2 L A 0
Development Sequence
Function
A : Basic C : Plasma Filter(Indoor unit)+Gold Fin(Outdoor unit)
Unit Type
L : Wall Mounted, L Look
Model Type
C : Cooling Only H : Heat Pump
Jet Cool:
- In this mode very quick and fast cooling is done. The unit will continue to supply high velocity air for 30 min-
utes, untill the room temperature reaches 18°C.
Dust
Plasma Air Purifier: Dust particles
electrode
discharge
Pre-filter Ionizer Dusts Collection
- It not only removes microscopic contaminants &
+
dust, but also removes house mites, pollen, and pet +6.5KV +
discharge Purified
Polluted +
fur. It helps to prevent allergic diseases like Air
+
fresh Air
ON OFF
SET CANCEL
Defrost / Deicing :
- In the heating mode, it prevents the ice formation on the outdoor unit. The heating cycle is reversed to the
cooling cycle to defrost the evaporator pipe of the outdoor unit. While defrost cycle, the compressor is on and
indoor fan, outdoor fan and 4-way valve are off.
Multi Split
Function
L2-C172LA0 LM-1723C2L LM-1830C2L LM-1830H2L LM-2420H2G LM-2423C2G
Air Discharge outlet 1 1 1 1 1 1
Airflow Direction control (left & right) Manual Manual Manual Manual Manual Manual
Airflow Direction control (up & down) Auto Auto Auto Auto Auto Auto
Airflow Steps(Fan / Cool /Heat) 3/4/- 3/4/- 3/4/- 3/4/3 3/4/3 3/4/-
Auto Changeover - - - O O -
Auto Operation O O O O O O
Auto Restart Operation O O O O O O
Auto Swing O O O O O O
Central Control Accessory Accessory Accessory Accessory Accessory Accessory
CHAOS wind (Auto wind) O O O O O O
Child Lock Function - - - - - -
Cooling & Fan Operation O O O - - O
Coolling, Heating & Fan Operation - - - O O -
Defrost / Deicing - - - O O -
Deodorizing Filter O O O O O O
Drain Pump - - - - - -
E.S.P. Control - - - - - -
Electric Heater - - - - - -
Energy Saving Gold Fin Optional Optional Optional Optional Optional -
Environment Friendly Refrigerant - - - - - -
Fire Alarm Function - - - - - -
Forced Operation O O O O O O
Group Control - - - - - -
High Ceiling Operation - - - - - -
Hot Start - - - O O -
Jet Cool O O O O O O
Low Ambient Control - - - - - -
Plasma Air Purifier Optional Optional Optional Optional Optional -
Prefilter(Washable / Anti-fungus) O O O O O O
Restart Delay (3-minutes) O O O O O O
Self Diagnosis O O O O O O
Sleep Mode O O O O O O
Soft Dry Operation O O O O O O
Comfort Operation With Swirl - - - - - -
Tele Control - - - - - -
Temperature Control O O O O O O
Test Function O O O O O O
Time Delay Safety Function O O O O O O
Timer (weekly) - - - - - -
Timer (24 hr On/Off) O O O O O O
Two Thermistor Control - - - - - -
Vane Step Control - - - - - -
Wired LCD Remote Controller - - - - - -
Wireless Remote Controller O O O O O O
Zero Standby Power - - - - - -
Zone Control - - - - - -
Notes :
• O : Basic
• Optional : Factory-Installed
• Accessory : Field-Installed
• - : Not available on this system
Multi Split
Function
LM-2424A2G LM-2421C2L LM-2422A2L LM-2430C2L LM-2430H2L LM-3022C3L/A3L
Air Discharge outlet 1 1 1 1 1 1
Airflow Direction control (left & right) Manual Manual Manual Manual Manual Manual
Airflow Direction control (up & down) Auto Auto Auto Auto Auto Auto
Airflow Steps(Fan / Cool /Heat) 3/4/- 3/4/- 3/4/- 3/4/- 3/4/3 3/4/-
Auto Changeover - - - - O -
Auto Operation O O O O O O
Auto Restart Operation O O O O O O
Auto Swing O O O O O O
Central Control Accessory Accessory Accessory Accessory Accessory Accessory
CHAOS wind (Auto wind) O O O O O O
Child Lock Function - - - - - -
Cooling & Fan Operation O O O O - O
Coolling, Heating & Fan Operation - - - - O -
Defrost / Deicing - - - - O -
Deodorizing Filter O O O O O O
Drain Pump - - - - - -
E.S.P. Control - - - - - -
Electric Heater - - - - - -
Energy Saving Gold Fin O - O Optional Optional Optional
Environment Friendly Refrigerant - - - - - -
Fire Alarm Function - - - - - -
Forced Operation O O O O O O
Group Control - - - - - -
High Ceiling Operation - - - - - -
Hot Start - - - - O -
Jet Cool O - O O O -
Low Ambient Control - - - - - -
Plasma Air Purifier O - O Optional Optional Optional
Prefilter(Washable / Anti-fungus) O O O O O O
Restart Delay (3-minutes) O O O O O O
Self Diagnosis O O O O O O
Sleep Mode O - O O O -
Soft Dry Operation O O O O O O
Comfort Operation With Swirl - - - - - -
Tele Control - - - - - -
Temperature Control O O O O O O
Test Function O O O O O -
Time Delay Safety Function O O O O O O
Timer (weekly) - - - - - -
Timer (24 hr On/Off) O O O O O O
Two Thermistor Control - - - - - -
Vane Step Control - - - - - -
Wired LCD Remote Controller - - - - - -
Wireless Remote Controller O O O O O O
Zero Standby Power - - - - - -
Zone Control - - - - - -
Notes :
• O : Basic
• Optional : Factory-Installed
• Accessory : Field-Installed
• - : Not available on this system
Multi Split
Function
LM-3620C2L LM-3622A2L LM-3625C3L LM-3626A3L LM-4820C3L/A3L LM-4822C3L/A3L
Air Discharge outlet 1 1 1 1 1 1
Airflow Direction control (left & right) Manual Manual Manual Manual Manual Manual
Airflow Direction control (up & down) Auto Auto Auto Auto Auto Auto
Airflow Steps(Fan / Cool /Heat) 3/4/- 3/4/- 3/4/- 3/4/- 3/4/- 3/4/-
Auto Changeover - - - - - -
Auto Operation O O O O O O
Auto Restart Operation O O O O O O
Auto Swing O O O O O O
Central Control Accessory Accessory Accessory Accessory Accessory Accessory
CHAOS wind (Auto wind) O O O O O O
Child Lock Function - - - - - -
Cooling & Fan Operation O O O O O O
Coolling, Heating & Fan Operation - - - - - -
Defrost / Deicing - - - - - -
Deodorizing Filter O O O O O O
Drain Pump - - - - - -
E.S.P. Control - - - - - -
Electric Heater - - - - - -
Energy Saving Gold Fin - O - O - O
Environment Friendly Refrigerant - - - - - -
Fire Alarm Function - - - - - -
Forced Operation O O O O O O
Group Control - - - - - -
High Ceiling Operation - - - - - -
Hot Start - - - - - -
Jet Cool O O O O O O
Low Ambient Control - - - - - -
Plasma Air Purifier - O - O - O
Prefilter(Washable / Anti-fungus) O O O O O O
Restart Delay (3-minutes) O O O O O O
Self Diagnosis O O O O O O
Sleep Mode O O O O O O
Soft Dry Operation O O O O O O
Comfort Operation With Swirl - - - - - -
Tele Control - - - - - -
Temperature Control O O O O O O
Test Function - - - - - -
Time Delay Safety Function O O O O O O
Timer (weekly) - - - - - -
Timer (24 hr On/Off) O O O O O O
Two Thermistor Control - - - - - -
Vane Step Control - - - - - -
Wired LCD Remote Controller - - - - - -
Wireless Remote Controller O O O O O O
Zero Standby Power - - - - - -
Zone Control - - - - - -
Notes :
• O : Basic
• Optional : Factory-Installed
• Accessory : Field-Installed
• - : Not available on this system
Indoor Unit mm 16 16 16 16
Drain hose(ID Ø) Outdoor Unit mm - - - -
Indoor A inch(mm) 35.0*9.9*13.4(890*252*340) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370) 45.9*10.0*15.3(1165*255*388)
Packing Dimension (W*H*D) Indoor B inch(mm) 35.0*9.9*13.4(890*252*340) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370) 45.9*10.0*15.3(1165*255*388)
Outdoor inch(mm) 37.8*24.0*15.1(960*610*384) 40.2*28.1*17.3(1020*715*440) 40.2*28.1*17.3(1020*715*440) 40.1*34.2*17.3(1020*870*440)
Without S/Parts 20/40ft 76/162 55/113 55/113 45/94
Stuffing Quantity With S/Parts 20/40ft 66/138 53/110 53/110 40/84
Indoor Unit mm 16 16 16 16
Drain hose(ID Ø)
Outdoor Unit mm - 16 - 16
Indoor A inch(mm) 35.0*9.9*13.4(890*252*340) 35.0*9.9*13.4(890*252*340) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370)
Packing Dimension (W*H*D) Indoor B inch(mm) 35.0*9.9*13.4(890*252*340) 35.0*9.9*13.4 (890*252*340) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370)
Outdoor inch(mm) 40.1*28.1*17.3 (1020*715*440) 40.1*28.1*17.3 (1020*715*440) 40.1*28.1*17.3 (1020*715*440) 40.1*28.1*17.3 (1020*715*440)
Without S/Parts 20/40ft 59/120 59/120 55/113 55/113
Stuffing Quantity
With S/Parts 20/40ft 56/115 56/115 53/110 53/110
Notes: 1. Capacities are based on the following conditions:
Cooling: - Indoor Temperature 26.7°C(80°F) DB /19.4°C(67°F) WB Heating: - Indoor Temperature 21.1°C(70°F) DB / 15.6°C(60°F) WB
- Outdoor Temperature 35°C(95°F) DB /23.9°C(75°F) WB - Outdoor Temperature 8.3°C(47°F) DB / 6.1°C(43°F) WB
- Interconnecting Piping Length 7.5m - Interconnecting Piping Length 7.5 m
- Level Difference of Zero. - Level Difference of Zero.
2. Capacities are Net Capacities.
3. Due to our policy of innovation some specifications may be changed without notification.
Indoor (H/M/L)
C CMM(CFM) 9.5(336) 13(460) 9.66
Noise Level(Sound Press,1m) A dB(A)±3 38/36/34 47/45/43 38/36/34
Indoor(H/M/L) B dB(A)±3 38/36/34 38/36/34 38/36/34
C dB(A)±3 38/36/34 38/36/34 38/36/34
Temperature Controller Thermistor Thermistor Thermistor
Tube Size (OD ),Ø inch(mm) 0.275(7.0) 0.275(7.0) 0.275(7.0)
Indoor Coil Fins per inch 21 20/21 21
No. of Rows & Column 2R12C 2R13C-2R12C 2R12C
A inch(mm) 35.0*11.3*6.7(888*287*170) 42.5*12.4*7.2(1080*314*182) 35.0*11.3*6.7(888*287*170)
Dimensions (W*H*D) Indoor B inch(mm) 35.0*11.3*6.7(888*287*170) 35.0*11.3*6.7(888*287*170) 35.0*11.3*6.7(888*287*170)
C inch(mm) 35.0*11.3*6.7(888*287*170) 35.0*11.3*6.7(888*287*170) 35.0*11.3*6.7(888*287*170)
Net Weight indoor kg(lbs) 9(19.8) 11(24.2)/9(19.8)/11(19.8) 9(19.8)
Locked Rotor Amp. A 76 56.6 31(a)/56.5(b)
Type Scroll Rolling Piston Typed Rotary Rotary
Quantity No. 1 2 1
Model SQ028KAA QP348KD24A QK182KAC(a)/QP348KD24A(b)
Maker LG LG LG
Compressor Capacity kcal/h(Btu/h) 7,182(28,500) 6,174(24,500) a:3097(12220)/b:6174(24500
Motor Type Permanent Split Capacitor Type 2 Pole Induction(PSC Starting) Condenser Inducted
Motor Input W 1885 2310 1234/2310
Oil Type 3GSD 4GSD Suniso 4GSI
Oil Charge cc 750/700 650 330
O.L.P Type(model name) Internal Internal MRA98706-12026(a)/Internal(b)
Tube Size (OD), Ø inch(mm) 0.27(7) 0.27(7) 0.275(7)
Outdoor Coil Fins per inch 21 18 21
No. of Rows & Column 2R28C 2R26C*2EA 2R36C
Output W 90 90 90
Model AMR071B2 AMR-071B9 IC-1640LG
Outdoor
No. of Poles 6 6 6
Outdoor fan motor
Input W 168 168 193
Running Current A 0.5 0.5 0.5
Capacitor µF/Vac 6 / 370 6 / 370 6 / 370
Air Circulation Outdoor CMM(CFM) 53(1873) 53(1873) 53(1872)
Type Centrifugal Blower Centrifugal Blower Propeller
No. Used / Diameter EA/inch(mm) 1/18.11(460) 2/18.11(460) 1/18.1(460)
Outdoor Fan
Discharge Side/Top Side Discharge Side Discharge Side Discharge
Speed rpm 880 900 980
Noise Level(Sound Press,1m) Outdoor dB(A)±3 56 58 57
Liquid A inch (mm) 1 / 4 (6.35) 3 / 4 (9.52) 1 / 4 (6.35)
Gas A inch (mm) 1 / 2 (12.7) 5 / 8 (15.88) 1 / 2(12.7)
Liquid B inch (mm) 1 / 4 (6.35) 1 / 4 (6.35) 1 / 4 (6.35)
SVC Valve
Gas B inch (mm) 1 / 2 (12.7) 1 / 2 (12.7) 1 / 2(12.7)
Liquid C inch (mm) 1 / 4 (6.35) 1 / 4 (6.35) 1 / 4 (6.35)
Gas C inch (mm) 1 / 2 (12.7) 1 / 2 (12.7) 1 / 2(12.7)
Dimensions (W*H*D) Outdoor inch(mm) 34.3*25.8*12.6(870*655*320) 35.4*48.2*14.6(900*1225*370) 34.3*31.5*12.6(870*800*320)
Net Weight Outdoor kg(lbs) 62(137) 93(205.5) 68(149.8)
Power Supply Cable No.* mm2 3 * 2.5 3 * 5.0 3 * 3.5
Connecting Cable No.* mm2 4 * 0.75 4 * 0.75 4 * 0.75
Liquid Side inch(mm) 1/4(6.35)*3 pcs 3/4(9.52), 1/4 (6.35)*2 pcs 1/4 (6.35)*3 pcs
Connecting Tube Gas Side inch(mm) 1/2(12.7)*3 pcs 5/8(15.88), 1/2(12.7)*2 pcs 1/2(12.7)*3 pcs
(Ø Socket Flare) Length, std m 7.5 7.5 7.5
Max length/elevation m 15/7 15/7 15/7
Other
Indoor Unit mm 16 16 16
Drain hose(ID Ø)
Outdoor Unit mm - - -
Indoor A inch(mm) 37.8*9.5*14.6(960*242*370) 45.9*10.0*15.3(1165*255*388) 37.8*9.5*14.6(960*242*370)
Indoor B inch(mm) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370)
Packing Dimension (W*H*D)
Indoor C inch(mm) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370) 37.8*9.5*14.6(960*242*370)
Outdoor inch(mm) 40.1*28.1*17.3(1020*715*440) 42.1*51.2*19.4(1070*1300*495) 40.1*34.2*17.3(1020*870*440)
Without S/Parts 20/40ft 45/96 22/48 42/88
Stuffing Quantity
With S/Parts 20/40ft 39/85 22/48 36/78
Notes: 1. Capacities are based on the following conditions:
Cooling: - Indoor Temperature 27°C(80.6°F) DB /19°C(66.2°F) WB Heating: - Indoor Temperature 20°C(68°F) DB / 15°C(59°F) WB
- Outdoor Temperature 35°C(95°F) DB /24°C(75.2°F) WB - Outdoor Temperature 7°C(44.6°F) DB / 6°C(42.8°F) WB
- Interconnecting Piping Length 7.5m - Interconnecting Piping Length 7.5 m
- Level Difference of Zero. - Level Difference of Zero.
2. Capacities are Net Capacities.
3. Due to our policy of innovation some specifications may be changed without notification.
Indoor Unit mm 20 20 16
Drain hose(ID Ø) Outdoor Unit mm 16 - 16
Indoor A inch(mm) 38.0*8.4*14.2(964*213*360) 38.0*8.4*14.2(964*213*360) 35.0*9.9*13.4(890*252*340)
Packing Dimension (W*H*D) Indoor B inch(mm) 38.0*8.4*14.2(964*213*360) 38.0*8.4*14.2(964*213*360) 34.6*13.4*9.9(878*328*232)
Outdoor inch(mm) 40.2*28.1*17.3(1020*715*440) 40.2*28.1*17.3(1020*715*440) 37.8*24.0*15.1(960*610*384)
Without S/Parts 20/40ft 53/110 53/110 76/162
Stuffing Quantity With S/Parts 20/40ft 52/108 52/108 66/138
Notes: 1. Capacities are based on the following conditions:
Cooling: - Indoor Temperature 27°C(80.6°F) DB /19°C(66.2°F) WB Heating: - Indoor Temperature 20°C(68°F) DB / 15°C(59°F) WB
- Outdoor Temperature 35°C(95°F) DB /24°C(75.2°F) WB - Outdoor Temperature 7°C(44.6°F) DB / 6°C(42.8°F) WB
- Interconnecting Piping Length 7.5m - Interconnecting Piping Length 7.5 m
- Level Difference of Zero. - Level Difference of Zero.
2. Capacities are Net Capacities.
3. Due to our policy of innovation some specifications may be changed without notification.
Installation plate
Installation plate
20mm
A A
50mm
ø70mm ø70mm
ø70mm ø70mm
Model
9K Btu Series 10K, 12K, 14K 17K Btu Series
Dimensions
W mm 802 888
H mm 262 287
D mm 165 170
W
D
W
H
Installation plate
Model
18K, 24K 12K
Dimensions
W mm 1,080 888
H mm 314 287
D mm 182 170
D
W
Installation plate
W mm 900
H mm 285
D mm 156
L2
L1
D
L3
L4
H
Gas side
L10 L11 L12 L13
3-way valve
Liquid side
2-way valve
L5
L7 L6 L8 L9
Model
LM-1723C2L/L2-C172LA0/L2-C172LC0
Dimensions
W mm 810
H mm 555
D mm 262
L1 mm 339
L2 mm 300
L3 mm 37
L4 mm 543.6
L5 mm 11.4
L6 mm 591
L7 mm 105
L8 mm 105
L9 mm 72.5
L10 mm 74.5
L11 mm 79
L1
D
L2
Gas side
L9 L10 L10L10
L3
3-Way valve
H
Liquid side
2-Way valve
L6 L5 L7 L8
L4
Model LM-1830C2L/1830H2L/2421C2L/2422A2L
LM-3620C2L/3622A2L
Dimensions 2430C2L/2430H2L/2420H2G/2423C2G/2424A2G
W mm 870 870
H mm 655 800
D mm 320 320
L1 mm 370 370
L2 mm 25 25
L3 mm 630 775
L4 mm 25 25
L5 mm 546 546
L6 mm 160 160
L7 mm 160 160
L8 mm 64 64
L9 mm 76.5 76.5
L10 mm 50 45
L1
D
L2
Gas side
Liquid side
2-way valve
L4
L6 L5 L7 L8
Model
LM-3022C3L/3022A3L LM-3625C3L/3626A3L
Dimensions
W mm 870 870
H mm 655 800
D mm 320 320
L1 mm 370 370
L2 mm 25 25
L3 mm 630 775
L4 mm 25 25
L5 mm 546 546
L6 mm 160 160
L7 mm 160 160
L8 mm 64 64
L9 mm 76.5 76.5
L10 mm 50 50
L1
D
L2
Liquid side
2-way Valve
H
L4
Gas side
3-way valve
L10
L9
L5
L7 L6 L8
Model No.
LM-4820C3L/4820A3L/4822C3L/4822A3L
Dim
W mm 900
H mm 1,225
D mm 370
L1 mm 460
L2 mm 45
L3 mm 410
L4 mm 1,135
L5 mm 90
L6 mm 550
L7 mm 175
L8 mm 175
L9 mm 112
L10 mm 70.8
CN-MOTOR
MAIN PCB
FORCED MAIN PCB OPERATION
OPERATION
ASM ASM AUTO
CN-FAN
AUTO RESTART
RESTART SSR
SSR OR REMOTE
OR REMOTE CONTROL
CONTROL MOTOR
MOTOR BK
BK
CN-TH1
ZNR
ZNR CN-TH THERMISTOR
YL
BR
THERMISTOR
YL
BR
CN-U/D
CN-U/D
STEP
STEP SH-CAPA. MOTOR
CN-POWER
SH-CAPA. MOTOR
CN-POWER
FUSE
FUSE 4 3 AC250V/T2A
AC250V/T2A
RY-COMP.
GN/YL
CN-DISP1
CN-DISP1
BR
BL
YL
BR
BL
YL
PILLAR
PILLAR 1(L) 2(N) 3 TERMINAL
1(L) 2(N) 3 TERMINAL
DISPLAY PCB ASM
DISPLAY PCB ASM
TO OUTDOOR UNIT
TO OUTDOOR UNIT 3854A20023B 3854A20023C
SSR REMOTE
OR REMOTE CONTROL
CONTROL MOTOR
MOTOR
CN-TH
BK
CN-TH1
THERMISTOR
ZNR
THERMISTOR
YL
BR
CN-U/D
CN-POWER
STEP
SH-CAPA. MOTOR
CN-TAB1
CN-U/D
STEP
MOTOR
FUSE
4 3 AC250V/T2A
RD
BR
BK
BL
RY-COMP.
MAIN PCB ASSY
CN-DISP1
GN/YL
YL
C G V S
PILLAR PILLAR
1(L) 2(N) 3 TERMINAL TERMINAL
TO OUTDOOR UNIT
3854A20075M
TO OUTDOOR UNIT 3854A20023D
Notes:
FORCED FORCED
CN-MOTOR
MAIN PCB OPERATION MAIN PCB OPERATION
ASM
CN-FAN
AUTO
RESTART
ASM AUTO
SSR RESTART
OR TRIAC
REMOTE OR REMOTE
CONTROL CONTROL
MOTOR OPTION MOTOR
BK BK
CN-TH1
ZNR
CN-TH ZNR
THERMISTOR
YL
BR
THERMISTOR
YL
BR
CN-U/D
CN-U/D
SH-CAPA. STEP
STEP
CN-POWER
SH-CAPA. MOTOR
MOTOR
CN-TAB1
RD
FUSE RD
H.V.B A/CL
AC250V/T2A H.V.B A/CL FUSE BK BK
4 3 AC250V/T2A
BK BK
BK BK RY-COMP.
BK BK
BK BK
BK BK
LIMIT
S/W LIMIT
OPTION S/W
GN/YL
CN-DISP1 OPTION
GN/YL
BR
BL
YL
CN-DISP1
BR
PILLAR
BL
3854A20135F
Notes:
CN-TH
THERMISTOR
CN-AC/DC
CN-AC/DC
CN-U/D
TRIAC STEP
OR
MOTOR
MOTOR
BK
CN-MOTOR
BR YL
SH-CAPA CN-TAB1
RD AIR
H.V.
FUSE ASM BK CLEAN
BR
TO OUTDOOR UNIT
(PLASMA)
4 3 250V T2A
3 2(N) 1(L)
BK
RY-COMP BK SAFETY S/W1
BK
BK SAFETY S/W2
CN-DISP OPTION
GN/YL
SW(FORCE)
T/BLOCK
DISPLAY PWB ASM
3854A20142F
Notes:
CN-TRANS
MAIN P.C.B. ASM C MOTOR SC COMP S MAIN P.C.B. ASM C MOTOR SC COMP S
R R R
YL
YL R
RD
RY-HI
RD
FUSE(250V/3.15A)
CN-COM
RY-HI
FUSE(250V/3.15A)
CN-COM
BL BR BL
BL BR BL
5(B)
RY-COMP
BL 5(B)
7(A)
RY-COMP
RY-S.V1
RY-S.V2
RY-BP1
7(A) BL
RY-S.V1
RY-S.V2
RY-BP1
BR RD
BR RD
CAPA.
CN-POWER
CAPA.
CN-COMP
CN-POWER
F C H
CN-COMP
F C H
BK
YL BL BK BK
YL BL BK
WH
WH
BK
BK
BK T/BLOCK 2
A B BP BK T/BLOCK 2
S/V S/V S/V A B BP
S/V S/V S/V
BL BL BL
BL BL BL
T/BLOCK 1
BK T/BLOCK 1
BK
BK
BK
WH
WH
TERMINAL
BLOCK(6P) 1(L) 2(N) 1(L) 2(N) 3(A) 3(B) TERMINAL
BLOCK(6P) 1(L) 2(N) 1(L) 2(N) 3(A) 3(B)
BR C COMP BK
MOTOR
BK
RD YL "B" BL OR
C
R YL
R S OR
CAPACITOR OR
F
BK
COMP BK H C F
"A" OR
CAPACITOR
RD BK
R R BR
S
C "A" "B"
COMP COMP YL
MOTOR
GN/YL
BR YL C C S
BK
OLP
OLP
BK
WH BL RD
BL TRANS-
WH FORMER
CN-SV
1 2
RY-COMP A
RY-COMP B
CN-TRANAS
4 4
RY-FAN1
RD MAIN DC
3 3
3 4 PCB ASSY
5 6 FUSE T3.15A
RD WH
MAIN AC PCB ASSY
7 8 T/B CN-POWER CN-COMP1 CN-COMP2
GN/YL POWER WH WH YL WH
RELAY BK BL BK BL
FUS250V 2.5A
FUS250V 2.5A
FUS250V 2.5A
FUS250V 2.5A
WH WH WH
BK BK
BK GN/YL BK
RD BK BR BL OR BK BR BL
TERMINAL C G V S
PILLAR
C G V S
1(L) 2(N) 3 3 2(N) 1(L) 1(L) 2(N) BLOCK TERMINAL
L1 L2
TO INDOOR UNIT
3854A20023Y
3854A20075L
Notes:
CN-COM
BK BK BK COMP
BK MOTOR
OR B
A 4-WAY
B 4-WAY
5 BK R
MAIN P.C.B ASM A
7 R
YL
BL
CN-TRANS
CAPACITOR OR OR BK BR
BK BR YL
H C F BK BK WH
CAPA.
CAPACITOR
RD BK
R BR
FUSE(250V/3.15A)
R
RY-S.V1
RY-S.V2
S F C H
RY-COMP
TRANS FORMER
RY-HI
"A" "B"
COMP COMP YL OR
5
CN-POWER
THERMISTOR
CN-COMP
C C S
CN-FAN
BK BL YL
CN-S.V
BK
OLP
OLP
BL RD 4 3 2 1 1 3 2 1
TRANS-
FORMER
CN-SV CN-TH1
YL BL
RY-COMP A
RY-COMP B
CN-TRANAS
4 4
RY-FAN1
RY-SV3
RY-SV4
3 3 MAIN DC
PCB ASSY
WH
FUSE T3.15A A B
MAIN AC PCB ASSY S/V S/V
BK
CN-POWER CN-COMP1 CN-COMP2 BK
BL BL
WH WH YL WH
BK BL BK BL
FUS250V 2.5A
FUS250V 2.5A
FUS250V 2.5A
FUS250V 2.5A
GN/YL
BK BK
T/BLOCK
GN/YL BK WH GN/YL
RD BK BR BL OR BK BR BL WH WH
C G V S
PILLAR BK BK
C G V S
TERMINAL
L1 L2 TERMINAL
1 (L) 2 (N ) 3 1 (L) 2(N ) 3 1 (L ) 2 (N )
BLOCK(10P)
TO INDOOR UNIT
C G V S C G V S
MAIN
POWER A-UNIT B-UNIT MAIN
RD BK BR BL RD BK BR BL
POWER
A INDOOR B INDOOR TO INDOOR UNIT
3854A30076L
3854A20075K
C YL
F
B BK
C ROOM
B ROOM
BYPASS
MOTOR
CAPA.
A OR
MAIN P.C.B. ASM BR
C
OR BK
CN-TRANS
RD WH
H
BK
S.V
S.V
S.V
YL T/B3
BL RD BK
CAPA. S R R BR
CAPA.
BR "A" "B"
TRANS FORMER
OR COMP COMP YL
C C S
BK BK
OLP
BR WH RD
BL RD
RELAY 1
YL BL RD BK CN-COMP CN-FAN CN-BYPASS CN-SV
CN-TH1 CN-TH2
RY1
RY2
RY7
RY3
RY9
RY8
WH WH
TRANS- BR
BK FORMER BL
RD WH BK
T/BLOCK
BK WH WH
GN/YL
WH WH BK BK BK
BK BK BK
TERMINAL
GN/YL
GN/YL
TERMINAL 1(L) 2(N) 3 3 2(N) 1(L) 2(N) 3 1(L) 2(N) 1(L) 2(N) 3 3 2(N) 1(L) 3 1(L) 2(N) BLOCK
BLOCK(10P)
Notes:
B - THERMISTOR
A - THERMISTOR
CN - TH1
B S/V CS/V CN - SV
A B
BK
A
BR
BR
RD WH
RY - SV1 RY - SV2
MAIN PCB BR
ASSY
BR
WH
B
BL
BL GN / YL
YL
C - UNIT
CN - COMP
RD
3 1(L) 2(N) 3
BK
BL BL RY - COMP(B) YL
RD 8 6 4 2 B
TO INDOOR UNIT
B
BK 1 0 WH
RY - COMP(A)
B - UNIT
WH
RD
A
V S/V
B S /C BL
RD
8 6 4 2 YL
A
1 0
CN - POWER
A - UNIT
FUSE 250V / 3.15A BK BR
1(L) 2(N) 3
BK
WH
RY - HI
CN - COM
5 3
WH
CN - TRANS
7
CN - FAN
LOW
HI
WH
4(L)
POWER INPUT
1Ø, 220V, 60Hz
GN / YL
BK
GN / YL
BL BL WH WH
TB1 TB3 BK
3(N)
BK
BK BK
TB2 TB4
BK BL
OR 1 2 1 2
3 4
OR WH 3 4
BL
5 6 BK 5 6
A B
7 8 7 8
A B
BK OR BK OR
YL YL
BK OR BK OR
RD BK BR YL WH BL
S S
S S
C R C R
C R C R
A - MOTOR B - MOTOR
A - COMP B - COMP
3854A30042Z
Notes:
COMP COMPRESSOR BL BLUE BK BLACK
BR BROWN OR ORANGE RD RED
WH WHITE YL YELLOW GN/YL GREEN/YELLOW
H
CAPACITOR
BR C COMP
T/B 3
RD YL "B" BL
O.L.P
C
R
R S BK
F
COMP OR
"A"
OR
C
O.L.P MOTOR
GN/YL
BK YL
BR BK
OR
T/B 4
T/B 1 BL 3 NO
T/B 2 6
RD RD 1 C
POWER
BL 7 NC RELAY
BK RD BL
8
BK
GN/YL
BK BK
WH
WH
TERMINAL
1(L) 2(N) 3 3 2(N) 1(L) 1(L) 2(N) BLOCK
Notes:
3- WAY OUTDOOR
Valve COIL
INDOOR
COIL
COMP
B-Unit
A-Unit
2- WAY
Valve
CAPILLARY TUBE
LIQUID SIDE
CAPILLARY TUBE
2-WAY VALVE
INDOOR
COIL OUTDOOR
COIL
A-UNIT B-UNIT
COMPRESSOR
GAS SIDE B
3-WAY VALVE
COMPRESSOR
A
Notes:
Cooling Solenoid Valve Capillary Tube
ø12.7
COMP 3-WAY
Valve
INDOOR
OUTDOOR COIL
COIL
(A Unit) (B Unit)
ø6.35
ø6.35
COMPRESSOR-A
4-WAY
VALVE
3-WAY COMPRESSOR-B
VALVE
INDOOR 4-WAY
COIL VALVE
A-UNIT B-UNIT OUTDOOR
COIL
CAPILLARY TUBE
Notes:
Cooling Heating Deice
Solenoid Valve Capillary Tube
ø12.7
COMP ACCUMULATOR
ø12.7
ø12.7
3-WAY
Valve
OUTDOOR INDOOR
COIL COIL
ø6.35
ø6.35
ø6.35
2-WAY
Valve
2- WAY
INDOOR Valve
COIL
3- WAY
A-Unit Valve
OUTDOOR
COIL
Comp-A
3- WAY
Valve
INDOOR
COIL
Comp-B
C-Unit
B-Unit
2- WAY
Valve
Notes:
Cooling Solenoid Valve Capillary Tube
2- WAY
INDOOR Valve
COIL
3- WAY
A-Unit Valve
OUTDOOR
COIL
Comp-A
3- WAY
INDOOR Valve
COIL
Comp-B
C-Unit
B-Unit
2- WAY
Valve
Notes:
Cooling Solenoid Valve Capillary Tube
Notes: 1. All capacites are net, evaporator fan motor heat is deducted. 2. DB=Dry Bulb Temperature(°F), WB=Wet Bulb Temperature(°F)
3. TC=Total cooling capacity(Unit:1,000Btu/h) 4. SHC=Sensible heat capacity(Unit:1,000Btu/h)
5. PI=Power Input(Comp.+ indoor fan motor+outdoor fan motor) (kW)
Notes: 1. All capacites are net, evaporator fan motor heat is deducted. 2. DB=Dry Bulb Temperature(°F), WB=Wet Bulb Temperature(°F)
3. TC=Total cooling capacity(Unit:1,000Btu/h) 4. SHC=Sensible heat capacity(Unit:1,000Btu/h)
5. PI=Power Input(Comp.+ indoor fan motor+outdoor fan motor) (kW)
Notes: 1. All capacites are net, evaporator fan motor heat is deducted. 2. DB=Dry Bulb Temperature(°F), WB=Wet Bulb Temperature(°F)
3. TC=Total cooling capacity(Unit:1,000Btu/h) 4. SHC=Sensible heat capacity(Unit:1,000Btu/h)
5. PI=Power Input(Comp.+ indoor fan motor+outdoor fan motor) (kW)
Notes: 1. All capacites are net, evaporator fan motor heat is deducted. 2. DB=Dry Bulb Temperature(°F), WB=Wet Bulb Temperature(°F)
3. TC=Total cooling capacity(Unit:1,000Btu/h) 4. SHC=Sensible heat capacity(Unit:1,000Btu/h)
5. PI=Power Input(Comp.+ indoor fan motor+outdoor fan motor) (kW)
Correction Factor for Heating Capacity due to Frost on Heat Exchanger and Defrosting Operation.
The heating capacity in the Heating Capacity Table above indicates the actual heating capacity excluding the effect
of frost on the heat exchanger and the defrosting operation. Therefore, use the following factor to calculate the average heating capacity including
capacity reduction by frost on the exchanger and defrosting operation.
100
Capacity(%) Heating
Cooling
90
80
70
5 10 20 30 40
Total Pipe Length(m)
Ø9.52(3/8)/6.35(1/4) 20g/m
Ø12.7(1/2)/6.35(1/4) 30g/m
Ø15.88(5/8)/9.52(3/8) 50g/m
Notes:
• Equivalent pipe length=Actual pipe length + Number of bend x 3
• Refer to the specification for the maximum pipe length of each model.
Item Range
43(109.4)
Standard operation
21(69.8)
Operation with the
optional low ambient kit
-10(14)
Middle east model
Standard operation
-10(14)
10(50) 24(75.2)
Indoor air temperature °C D.B.(°F)
2m 2m
1.5 0.5
1.5
1m 1.0 1m
1.0
0.5
0m 0m
5m 4m 3m 2m 1m 0m 5m 4m 3m 2m 1m 0m
2m 2m
21 24
18 33
20 30
1m 1m
27
22
24
0m 0m
5m 4m 3m 2m 1m 0m 5m 4m 3m 2m 1m 0m
Cooling Heating
Air velocity [m/s] Air velocity [m/s]
2.7m 2.7m
2m 2m
2.5 1m 1m
2.0
1.0 1.5
0.5 1.0 1.5 0.5
0m 0m
8m 7m 6m 5m 4m 3m 2m 1m 0m 8m 7m 6m 5m 4m 3m 2m 1m 0m
2m 2m
18 33
20 1m 30 1m
21
24 27
24 22
0m 0m
8m 7m 6m 5m 4m 3m 2m 1m 0m 8m 7m 6m 5m 4m 3m 2m 1m 0m
80 80
80
70 70
70
NC-70 NC-70
NC-70
Sound Pressure Level (dB re 20µPa )
80 80 80
70 70 70
NC-70 NC-70 NC-70
Sound Pressure Level (dB re 20µPa )
Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz)
80 80 80
70 70 70
NC-70 NC-70 NC-70
Sound Pressure Level (dB re 20µPa )
63 125 250 500 1000 2000 4000 8000 63 125 250 500 1000 2000 4000 8000 63 125 250 500 1000 2000 4000 8000
Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz)
LM-4820C3L/A3L LM-4820C3L/A3L
LM-4822C3L/A3L LM-4822C3L/A3L
90 90
80 80
70 70
NC-70 NC-70
Sound Pressure Level (dB re 20µPa )
NC-65 NC-65
60 60
NC-60 NC-60
NC-55 NC-55
50 50
NC-50 NC-50
NC-45 NC-45
40 40
NC-40 NC-40
NC-35 NC-35
30 30
NC-30 NC-30
NC-25 NC-25
20 20
12k NC-20 24k NC-20
NC-15 NC-15
10 10
63 125 250 500 1000 2000 4000 8000 63 125 250 500 1000 2000 4000 8000
Octave Band Center Frequency (Hz) Octave Band Center Frequency (Hz)
More than 70 cm
Point down
2) Burrs removal
■ Completely remove all burrs from the cut cross section
of pipe/tube.
■ Put the end of the copper tube/pipe to downward
direction when you remove burrs in order to avoid to
Flare nut
let burrs drop in the tubing.
Copper tube
3) Putting nut on
■ Remove flare nuts attached to indoor and outdoor
units, then put them on pipe/tube having completly
burr removal.
(Not possible to put them on after flaring work)
4) Flaring work
■ Carry out flaring work using flaring tool as shown Handle
below.
Bar Bar
Outside diameter A "A" Yoke
mm inch mm Cone
Ø9.52 3/8 0.5~0.8
Ø15.88 5/8 0.8~1.0 Copper pipe
Firmly hold copper tube in a bar(or die) as indicated Clamp handle
dimension in the table above. Red arrow mark
Piping Connection
Vacuum drying
CAUTION
Terminal on the OUTDOOR UNIT 2. Secure the cable onto the control board with the hold-
1(L) 2(N) 3 3 2(N) 1(L) 3 1(L) 2(N) er (clamper).
Power cord 3. Refix the cover control to the original position with the
screw.
4. Use a recongnized circuit breaker between the power
1(L) 2(N) 3 1(L) 2(N) 3 1(L) 2(N) 3
source and the unit. A disconnection device to ade-
Terminal on the INDOOR UNIT Terminal on the INDOOR UNIT Terminal on the INDOOR UNIT quately disconnect all supply lines must be fitted.
A-UNIT B-UNIT C-UNIT
Caution
Terminal on the OUTDOOR UNIT
1(L) 2(N) 3 4 3 4 1(L) 2(N)
If a power plug is not to be used, provide a circuit break-
er between power source and the unit as shown below.
Power cord
CAUTION
The power cord connected to the outdoor unit The connecting cable connected to the indoor and
should be complied with the following specifications outdoor unit should be complied with the following
(Rubber insulation, type H05RN-F approved by HAR specifications (Rubber insulation, type H07RN-F
or SAA). approved by HAR or SAA).
ø7.5mm
ø8.5mm
Indoor unit
2) Suspension bolts should be used to support long stretches of drain pipe in order to ensure that a gradient
of 1/100 is maintained.(PVC pipe should not be bent)
Spacing of supports for horizontal piping
Class Nominal diameter Spacing
❑ Drain trap
Fit any indoor unit whose drain pipe connection is subjected to negative pressure, with a drain trap.
1) Rig the drain trap as shown in the drawing below
Indoor unit
H H: 50mm or more
2) Provide one trap per unit. A single trap for converging units will prove ineffective.
3) Rig the trap to allow for future changing.
Plug
Plug
Face piping
downward Face the vent pipe mouth downward to keep
foreign matter from penetrating the system
Vent pipe
2) The pipe work should be kept as short as possible and the number of indoor units per group kept to a min-
imum.
Indoor unit
Auxiliary drain hose Thermal insulation(drain pipe area)
■ Important points
- The drain pipe should be at least equal in size to that of the indoor unit drain pipe.
- The drain pipe is thermally insulated to prevent the formation of condensation outside the pipe.
- The drain up mechanism should be fitted before the indoor unit is installed. When the electricity has been
connected, some water should be added to the drain pan and the drain pump should be checked to see
that it is functioning correctly.
- All connections should be secured.(Special care is needed with PVC pipe)
- Insulate auxiliary drain hose with thermal insulation band.
Signal transmitter
5 JET COOL
Used to start or stop the speed cooling. (Speed cooling oper-
ates, super high fan speed in cooling mode.)
13 RESET BUTTON
3 ROOM TEMPERATURE SETTING BUTTONS Used prior to resetting time or after replacing batteries.
Used to select the room temperature.
ctronics
Ele In Approvals:
G
c.
L
EN ISO 9001
BS EN ISO 9001
M
REG I
IR
ST F ANSI/ASQC Q9001
I
O E R E D 97
S
4