Professional Documents
Culture Documents
204 - 02 Rear Suspension
204 - 02 Rear Suspension
Rear Suspension
4x2
Item Description
1 Shock absorber
2 Leaf Spring
3 Shackle Assembly
Item Description
1 Shock absorber
2 Leaf Spring
3 Shackle Assembly
Spring(15 621 0)
4x4
Removal 3. Torque: 120 Nm
CAUTION: Suspension fasteners are
critical parts because they affect
performance of vital components and
systems and their failure can result in
major service expense. A new part with the
same part number or an equivalent part
must be installed, if installation is
necessary. Do not use a part of lesser
quality or substitute design. Torque values
must be used as specified during
reassembly to make sure of correct
retention of these parts.
NOTE: Removal steps in this procedure may
contain installation details.
1. Refer to: Lifting (100-02 Jacking and Lifting,
Description and Operation).
4x2
All vehicles
2. Torque: 120 Nm
4. Torque: 162 Nm
Installation
CAUTION: Install new spring locknuts and
U-bolt nuts.
NOTE: Final tightening of the rear suspension
components should be carried out when the vehicle
weight is on the road wheels.
1. To install, reverse the removal procedure.
Removal
CAUTION: Suspension fasteners are
critical parts because they affect
performance of vital components and
systems and their failure can result in
major service expense. A new part with the
same part number or an equivalent part
must be installed, if installation is
necessary. Do not use a part of lesser
quality or substitute design. Torque values
must be used as specified during
reassembly to make sure of correct
retention of these parts.
NOTE: Removal steps in this procedure may
contain installation details.
1. Torque:
• 1. Torque: 47 Nm
• 2. Torque: 47 Nm
Installation
1. NOTE: Do not fully tighten the shock absorber
lower mounting bolt. The final tightening should
be carried out when the vehicle weight is on the
road wheels.